arm64: dts: qcom: sm8550: add TRNG node
[linux-modified.git] / arch / arm64 / boot / dts / intel / socfpga_agilex_socdk.dts
1 // SPDX-License-Identifier:     GPL-2.0
2 /*
3  * Copyright (C) 2019, Intel Corporation
4  */
5 #include "socfpga_agilex.dtsi"
6
7 / {
8         model = "SoCFPGA Agilex SoCDK";
9         compatible = "intel,socfpga-agilex-socdk", "intel,socfpga-agilex";
10
11         aliases {
12                 serial0 = &uart0;
13                 ethernet0 = &gmac0;
14                 ethernet1 = &gmac1;
15                 ethernet2 = &gmac2;
16         };
17
18         chosen {
19                 stdout-path = "serial0:115200n8";
20         };
21
22         leds {
23                 compatible = "gpio-leds";
24                 led0 {
25                         label = "hps_led0";
26                         gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
27                 };
28
29                 led1 {
30                         label = "hps_led1";
31                         gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
32                 };
33
34                 led2 {
35                         label = "hps_led2";
36                         gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
37                 };
38         };
39
40         memory@80000000 {
41                 device_type = "memory";
42                 /* We expect the bootloader to fill in the reg */
43                 reg = <0 0x80000000 0 0>;
44         };
45 };
46
47 &gpio1 {
48         status = "okay";
49 };
50
51 &gmac0 {
52         status = "okay";
53         phy-mode = "rgmii";
54         phy-handle = <&phy0>;
55
56         max-frame-size = <9000>;
57
58         mdio0 {
59                 #address-cells = <1>;
60                 #size-cells = <0>;
61                 compatible = "snps,dwmac-mdio";
62                 phy0: ethernet-phy@0 {
63                         reg = <4>;
64
65                         txd0-skew-ps = <0>; /* -420ps */
66                         txd1-skew-ps = <0>; /* -420ps */
67                         txd2-skew-ps = <0>; /* -420ps */
68                         txd3-skew-ps = <0>; /* -420ps */
69                         rxd0-skew-ps = <420>; /* 0ps */
70                         rxd1-skew-ps = <420>; /* 0ps */
71                         rxd2-skew-ps = <420>; /* 0ps */
72                         rxd3-skew-ps = <420>; /* 0ps */
73                         txen-skew-ps = <0>; /* -420ps */
74                         txc-skew-ps = <900>; /* 0ps */
75                         rxdv-skew-ps = <420>; /* 0ps */
76                         rxc-skew-ps = <1680>; /* 780ps */
77                 };
78         };
79 };
80
81 &mmc {
82         status = "okay";
83         cap-sd-highspeed;
84         broken-cd;
85         bus-width = <4>;
86         clk-phase-sd-hs = <0>, <135>;
87 };
88
89 &osc1 {
90         clock-frequency = <25000000>;
91 };
92
93 &uart0 {
94         status = "okay";
95 };
96
97 &usb0 {
98         status = "okay";
99         disable-over-current;
100 };
101
102 &watchdog0 {
103         status = "okay";
104 };
105
106 &qspi {
107         status = "okay";
108         flash@0 {
109                 #address-cells = <1>;
110                 #size-cells = <1>;
111                 compatible = "micron,mt25qu02g", "jedec,spi-nor";
112                 reg = <0>;
113                 spi-max-frequency = <100000000>;
114
115                 m25p,fast-read;
116                 cdns,page-size = <256>;
117                 cdns,block-size = <16>;
118                 cdns,read-delay = <2>;
119                 cdns,tshsl-ns = <50>;
120                 cdns,tsd2d-ns = <50>;
121                 cdns,tchsh-ns = <4>;
122                 cdns,tslch-ns = <4>;
123
124                 partitions {
125                         compatible = "fixed-partitions";
126                         #address-cells = <1>;
127                         #size-cells = <1>;
128
129                         qspi_boot: partition@0 {
130                                 label = "Boot and fpga data";
131                                 reg = <0x0 0x04200000>;
132                         };
133
134                         root: partition@4200000 {
135                                 label = "Root Filesystem - UBIFS";
136                                 reg = <0x04200000 0x0BE00000>;
137                         };
138                 };
139         };
140 };