arch/arm64/boot/dts/freescale/imx8mq.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright 2017 NXP
   4  * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
   5  */
   6
   7 #include <dt-bindings/clock/imx8mq-clock.h>
   8 #include <dt-bindings/power/imx8mq-power.h>
   9 #include <dt-bindings/reset/imx8mq-reset.h>
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include "dt-bindings/input/input.h"
  12 #include <dt-bindings/interrupt-controller/arm-gic.h>
  13 #include <dt-bindings/thermal/thermal.h>
  14 #include <dt-bindings/interconnect/imx8mq.h>
  15 #include "imx8mq-pinfunc.h"
  16
  17 / {
  18         interrupt-parent = <&gpc>;
  19
  20         #address-cells = <2>;
  21         #size-cells = <2>;
  22
  23         aliases {
  24                 ethernet0 = &fec1;
  25                 gpio0 = &gpio1;
  26                 gpio1 = &gpio2;
  27                 gpio2 = &gpio3;
  28                 gpio3 = &gpio4;
  29                 gpio4 = &gpio5;
  30                 i2c0 = &i2c1;
  31                 i2c1 = &i2c2;
  32                 i2c2 = &i2c3;
  33                 i2c3 = &i2c4;
  34                 mmc0 = &usdhc1;
  35                 mmc1 = &usdhc2;
  36                 serial0 = &uart1;
  37                 serial1 = &uart2;
  38                 serial2 = &uart3;
  39                 serial3 = &uart4;
  40                 spi0 = &ecspi1;
  41                 spi1 = &ecspi2;
  42                 spi2 = &ecspi3;
  43         };
  44
  45         ckil: clock-ckil {
  46                 compatible = "fixed-clock";
  47                 #clock-cells = <0>;
  48                 clock-frequency = <32768>;
  49                 clock-output-names = "ckil";
  50         };
  51
  52         osc_25m: clock-osc-25m {
  53                 compatible = "fixed-clock";
  54                 #clock-cells = <0>;
  55                 clock-frequency = <25000000>;
  56                 clock-output-names = "osc_25m";
  57         };
  58
  59         osc_27m: clock-osc-27m {
  60                 compatible = "fixed-clock";
  61                 #clock-cells = <0>;
  62                 clock-frequency = <27000000>;
  63                 clock-output-names = "osc_27m";
  64         };
  65
  66         hdmi_phy_27m: clock-hdmi-phy-27m {
  67                 compatible = "fixed-clock";
  68                 #clock-cells = <0>;
  69                 clock-frequency = <27000000>;
  70                 clock-output-names = "hdmi_phy_27m";
  71         };
  72
  73         clk_ext1: clock-ext1 {
  74                 compatible = "fixed-clock";
  75                 #clock-cells = <0>;
  76                 clock-frequency = <133000000>;
  77                 clock-output-names = "clk_ext1";
  78         };
  79
  80         clk_ext2: clock-ext2 {
  81                 compatible = "fixed-clock";
  82                 #clock-cells = <0>;
  83                 clock-frequency = <133000000>;
  84                 clock-output-names = "clk_ext2";
  85         };
  86
  87         clk_ext3: clock-ext3 {
  88                 compatible = "fixed-clock";
  89                 #clock-cells = <0>;
  90                 clock-frequency = <133000000>;
  91                 clock-output-names = "clk_ext3";
  92         };
  93
  94         clk_ext4: clock-ext4 {
  95                 compatible = "fixed-clock";
  96                 #clock-cells = <0>;
  97                 clock-frequency = <133000000>;
  98                 clock-output-names = "clk_ext4";
  99         };
 100
 101         cpus {
 102                 #address-cells = <1>;
 103                 #size-cells = <0>;
 104
 105                 A53_0: cpu@0 {
 106                         device_type = "cpu";
 107                         compatible = "arm,cortex-a53";
 108                         reg = <0x0>;
 109                         clock-latency = <61036>; /* two CLK32 periods */
 110                         clocks = <&clk IMX8MQ_CLK_ARM>;
 111                         enable-method = "psci";
 112                         i-cache-size = <0x8000>;
 113                         i-cache-line-size = <64>;
 114                         i-cache-sets = <256>;
 115                         d-cache-size = <0x8000>;
 116                         d-cache-line-size = <64>;
 117                         d-cache-sets = <128>;
 118                         next-level-cache = <&A53_L2>;
 119                         operating-points-v2 = <&a53_opp_table>;
 120                         #cooling-cells = <2>;
 121                         nvmem-cells = <&cpu_speed_grade>;
 122                         nvmem-cell-names = "speed_grade";
 123                 };
 124
 125                 A53_1: cpu@1 {
 126                         device_type = "cpu";
 127                         compatible = "arm,cortex-a53";
 128                         reg = <0x1>;
 129                         clock-latency = <61036>; /* two CLK32 periods */
 130                         clocks = <&clk IMX8MQ_CLK_ARM>;
 131                         enable-method = "psci";
 132                         i-cache-size = <0x8000>;
 133                         i-cache-line-size = <64>;
 134                         i-cache-sets = <256>;
 135                         d-cache-size = <0x8000>;
 136                         d-cache-line-size = <64>;
 137                         d-cache-sets = <128>;
 138                         next-level-cache = <&A53_L2>;
 139                         operating-points-v2 = <&a53_opp_table>;
 140                         #cooling-cells = <2>;
 141                 };
 142
 143                 A53_2: cpu@2 {
 144                         device_type = "cpu";
 145                         compatible = "arm,cortex-a53";
 146                         reg = <0x2>;
 147                         clock-latency = <61036>; /* two CLK32 periods */
 148                         clocks = <&clk IMX8MQ_CLK_ARM>;
 149                         enable-method = "psci";
 150                         i-cache-size = <0x8000>;
 151                         i-cache-line-size = <64>;
 152                         i-cache-sets = <256>;
 153                         d-cache-size = <0x8000>;
 154                         d-cache-line-size = <64>;
 155                         d-cache-sets = <128>;
 156                         next-level-cache = <&A53_L2>;
 157                         operating-points-v2 = <&a53_opp_table>;
 158                         #cooling-cells = <2>;
 159                 };
 160
 161                 A53_3: cpu@3 {
 162                         device_type = "cpu";
 163                         compatible = "arm,cortex-a53";
 164                         reg = <0x3>;
 165                         clock-latency = <61036>; /* two CLK32 periods */
 166                         clocks = <&clk IMX8MQ_CLK_ARM>;
 167                         enable-method = "psci";
 168                         i-cache-size = <0x8000>;
 169                         i-cache-line-size = <64>;
 170                         i-cache-sets = <256>;
 171                         d-cache-size = <0x8000>;
 172                         d-cache-line-size = <64>;
 173                         d-cache-sets = <128>;
 174                         next-level-cache = <&A53_L2>;
 175                         operating-points-v2 = <&a53_opp_table>;
 176                         #cooling-cells = <2>;
 177                 };
 178
 179                 A53_L2: l2-cache0 {
 180                         compatible = "cache";
 181                         cache-level = <2>;
 182                         cache-unified;
 183                         cache-size = <0x100000>;
 184                         cache-line-size = <64>;
 185                         cache-sets = <1024>;
 186                 };
 187         };
 188
 189         a53_opp_table: opp-table {
 190                 compatible = "operating-points-v2";
 191                 opp-shared;
 192
 193                 opp-800000000 {
 194                         opp-hz = /bits/ 64 <800000000>;
 195                         opp-microvolt = <900000>;
 196                         /* Industrial only */
 197                         opp-supported-hw = <0xf>, <0x4>;
 198                         clock-latency-ns = <150000>;
 199                         opp-suspend;
 200                 };
 201
 202                 opp-1000000000 {
 203                         opp-hz = /bits/ 64 <1000000000>;
 204                         opp-microvolt = <900000>;
 205                         /* Consumer only */
 206                         opp-supported-hw = <0xe>, <0x3>;
 207                         clock-latency-ns = <150000>;
 208                         opp-suspend;
 209                 };
 210
 211                 opp-1300000000 {
 212                         opp-hz = /bits/ 64 <1300000000>;
 213                         opp-microvolt = <1000000>;
 214                         opp-supported-hw = <0xc>, <0x4>;
 215                         clock-latency-ns = <150000>;
 216                         opp-suspend;
 217                 };
 218
 219                 opp-1500000000 {
 220                         opp-hz = /bits/ 64 <1500000000>;
 221                         opp-microvolt = <1000000>;
 222                         opp-supported-hw = <0x8>, <0x3>;
 223                         clock-latency-ns = <150000>;
 224                         opp-suspend;
 225                 };
 226         };
 227
 228         funnel {
 229                 /*
 230                  * non-configurable funnel don't show up on the AMBA
 231                  * bus.  As such no need to add "arm,primecell".
 232                  */
 233                 compatible = "arm,coresight-static-funnel";
 234
 235                 in-ports {
 236                         #address-cells = <1>;
 237                         #size-cells = <0>;
 238
 239                         port@0 {
 240                                 reg = <0>;
 241
 242                                 ca_funnel_in_port0: endpoint {
 243                                         remote-endpoint = <&etm0_out_port>;
 244                                 };
 245                         };
 246
 247                         port@1 {
 248                                 reg = <1>;
 249
 250                                 ca_funnel_in_port1: endpoint {
 251                                         remote-endpoint = <&etm1_out_port>;
 252                                 };
 253                         };
 254
 255                         port@2 {
 256                                 reg = <2>;
 257
 258                                 ca_funnel_in_port2: endpoint {
 259                                         remote-endpoint = <&etm2_out_port>;
 260                                 };
 261                         };
 262
 263                         port@3 {
 264                                 reg = <3>;
 265
 266                                 ca_funnel_in_port3: endpoint {
 267                                         remote-endpoint = <&etm3_out_port>;
 268                                 };
 269                         };
 270                 };
 271
 272                 out-ports {
 273                         port {
 274                                 ca_funnel_out_port0: endpoint {
 275                                         remote-endpoint = <&hugo_funnel_in_port0>;
 276                                 };
 277                         };
 278                 };
 279         };
 280
 281         pmu {
 282                 compatible = "arm,cortex-a53-pmu";
 283                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 284                 interrupt-parent = <&gic>;
 285         };
 286
 287         psci {
 288                 compatible = "arm,psci-1.0";
 289                 method = "smc";
 290         };
 291
 292         thermal-zones {
 293                 cpu_thermal: cpu-thermal {
 294                         polling-delay-passive = <250>;
 295                         polling-delay = <2000>;
 296                         thermal-sensors = <&tmu 0>;
 297
 298                         trips {
 299                                 cpu_alert: cpu-alert {
 300                                         temperature = <80000>;
 301                                         hysteresis = <2000>;
 302                                         type = "passive";
 303                                 };
 304
 305                                 cpu-crit {
 306                                         temperature = <90000>;
 307                                         hysteresis = <2000>;
 308                                         type = "critical";
 309                                 };
 310                         };
 311
 312                         cooling-maps {
 313                                 map0 {
 314                                         trip = <&cpu_alert>;
 315                                         cooling-device =
 316                                                 <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 317                                                 <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 318                                                 <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 319                                                 <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 320                                 };
 321                         };
 322                 };
 323
 324                 gpu-thermal {
 325                         polling-delay-passive = <250>;
 326                         polling-delay = <2000>;
 327                         thermal-sensors = <&tmu 1>;
 328
 329                         trips {
 330                                 gpu_alert: gpu-alert {
 331                                         temperature = <80000>;
 332                                         hysteresis = <2000>;
 333                                         type = "passive";
 334                                 };
 335
 336                                 gpu-crit {
 337                                         temperature = <90000>;
 338                                         hysteresis = <2000>;
 339                                         type = "critical";
 340                                 };
 341                         };
 342
 343                         cooling-maps {
 344                                 map0 {
 345                                         trip = <&gpu_alert>;
 346                                         cooling-device =
 347                                                 <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 348                                 };
 349                         };
 350                 };
 351
 352                 vpu-thermal {
 353                         polling-delay-passive = <250>;
 354                         polling-delay = <2000>;
 355                         thermal-sensors = <&tmu 2>;
 356
 357                         trips {
 358                                 vpu-crit {
 359                                         temperature = <90000>;
 360                                         hysteresis = <2000>;
 361                                         type = "critical";
 362                                 };
 363                         };
 364                 };
 365         };
 366
 367         timer {
 368                 compatible = "arm,armv8-timer";
 369                 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
 370                              <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
 371                              <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
 372                              <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
 373                 interrupt-parent = <&gic>;
 374                 arm,no-tick-in-suspend;
 375         };
 376
 377         soc: soc@0 {
 378                 compatible = "fsl,imx8mq-soc", "simple-bus";
 379                 #address-cells = <1>;
 380                 #size-cells = <1>;
 381                 ranges = <0x0 0x0 0x0 0x3e000000>;
 382                 dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
 383                 nvmem-cells = <&imx8mq_uid>;
 384                 nvmem-cell-names = "soc_unique_id";
 385
 386                 etm0: etm@28440000 {
 387                         compatible = "arm,coresight-etm4x", "arm,primecell";
 388                         reg = <0x28440000 0x1000>;
 389                         cpu = <&A53_0>;
 390                         clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
 391                         clock-names = "apb_pclk";
 392
 393                         out-ports {
 394                                 port {
 395                                         etm0_out_port: endpoint {
 396                                                 remote-endpoint = <&ca_funnel_in_port0>;
 397                                         };
 398                                 };
 399                         };
 400                 };
 401
 402                 etm1: etm@28540000 {
 403                         compatible = "arm,coresight-etm4x", "arm,primecell";
 404                         reg = <0x28540000 0x1000>;
 405                         cpu = <&A53_1>;
 406                         clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
 407                         clock-names = "apb_pclk";
 408
 409                         out-ports {
 410                                 port {
 411                                         etm1_out_port: endpoint {
 412                                                 remote-endpoint = <&ca_funnel_in_port1>;
 413                                         };
 414                                 };
 415                         };
 416                 };
 417
 418                 etm2: etm@28640000 {
 419                         compatible = "arm,coresight-etm4x", "arm,primecell";
 420                         reg = <0x28640000 0x1000>;
 421                         cpu = <&A53_2>;
 422                         clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
 423                         clock-names = "apb_pclk";
 424
 425                         out-ports {
 426                                 port {
 427                                         etm2_out_port: endpoint {
 428                                                 remote-endpoint = <&ca_funnel_in_port2>;
 429                                         };
 430                                 };
 431                         };
 432                 };
 433
 434                 etm3: etm@28740000 {
 435                         compatible = "arm,coresight-etm4x", "arm,primecell";
 436                         reg = <0x28740000 0x1000>;
 437                         cpu = <&A53_3>;
 438                         clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
 439                         clock-names = "apb_pclk";
 440
 441                         out-ports {
 442                                 port {
 443                                         etm3_out_port: endpoint {
 444                                                 remote-endpoint = <&ca_funnel_in_port3>;
 445                                         };
 446                                 };
 447                         };
 448                 };
 449
 450                 funnel@28c03000 {
 451                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 452                         reg = <0x28c03000 0x1000>;
 453                         clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
 454                         clock-names = "apb_pclk";
 455
 456                         in-ports {
 457                                 #address-cells = <1>;
 458                                 #size-cells = <0>;
 459
 460                                 port@0 {
 461                                         reg = <0>;
 462
 463                                         hugo_funnel_in_port0: endpoint {
 464                                                 remote-endpoint = <&ca_funnel_out_port0>;
 465                                         };
 466                                 };
 467
 468                                 port@1 {
 469                                         reg = <1>;
 470
 471                                         hugo_funnel_in_port1: endpoint {
 472                                         /* M4 input */
 473                                         };
 474                                 };
 475                                 /* the other input ports are not connect to anything */
 476                         };
 477
 478                         out-ports {
 479                                 port {
 480                                         hugo_funnel_out_port0: endpoint {
 481                                                 remote-endpoint = <&etf_in_port>;
 482                                         };
 483                                 };
 484                         };
 485                 };
 486
 487                 etf@28c04000 {
 488                         compatible = "arm,coresight-tmc", "arm,primecell";
 489                         reg = <0x28c04000 0x1000>;
 490                         clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
 491                         clock-names = "apb_pclk";
 492
 493                         in-ports {
 494                                 port {
 495                                         etf_in_port: endpoint {
 496                                                 remote-endpoint = <&hugo_funnel_out_port0>;
 497                                         };
 498                                 };
 499                         };
 500
 501                         out-ports {
 502                                 port {
 503                                         etf_out_port: endpoint {
 504                                                 remote-endpoint = <&etr_in_port>;
 505                                         };
 506                                 };
 507                         };
 508                 };
 509
 510                 etr@28c06000 {
 511                         compatible = "arm,coresight-tmc", "arm,primecell";
 512                         reg = <0x28c06000 0x1000>;
 513                         clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
 514                         clock-names = "apb_pclk";
 515
 516                         in-ports {
 517                                 port {
 518                                         etr_in_port: endpoint {
 519                                                 remote-endpoint = <&etf_out_port>;
 520                                         };
 521                                 };
 522                         };
 523                 };
 524
 525                 aips1: bus@30000000 { /* AIPS1 */
 526                         compatible = "fsl,aips-bus", "simple-bus";
 527                         reg = <0x30000000 0x400000>;
 528                         #address-cells = <1>;
 529                         #size-cells = <1>;
 530                         ranges = <0x30000000 0x30000000 0x400000>;
 531
 532                         sai1: sai@30010000 {
 533                                 #sound-dai-cells = <0>;
 534                                 compatible = "fsl,imx8mq-sai";
 535                                 reg = <0x30010000 0x10000>;
 536                                 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 537                                 clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
 538                                          <&clk IMX8MQ_CLK_SAI1_ROOT>,
 539                                          <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
 540                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 541                                 dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
 542                                 dma-names = "rx", "tx";
 543                                 status = "disabled";
 544                         };
 545
 546                         sai6: sai@30030000 {
 547                                 #sound-dai-cells = <0>;
 548                                 compatible = "fsl,imx8mq-sai";
 549                                 reg = <0x30030000 0x10000>;
 550                                 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 551                                 clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
 552                                          <&clk IMX8MQ_CLK_SAI6_ROOT>,
 553                                          <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
 554                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 555                                 dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
 556                                 dma-names = "rx", "tx";
 557                                 status = "disabled";
 558                         };
 559
 560                         sai5: sai@30040000 {
 561                                 #sound-dai-cells = <0>;
 562                                 compatible = "fsl,imx8mq-sai";
 563                                 reg = <0x30040000 0x10000>;
 564                                 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 565                                 clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
 566                                          <&clk IMX8MQ_CLK_SAI5_ROOT>,
 567                                          <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
 568                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 569                                 dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
 570                                 dma-names = "rx", "tx";
 571                                 status = "disabled";
 572                         };
 573
 574                         sai4: sai@30050000 {
 575                                 #sound-dai-cells = <0>;
 576                                 compatible = "fsl,imx8mq-sai";
 577                                 reg = <0x30050000 0x10000>;
 578                                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 579                                 clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
 580                                          <&clk IMX8MQ_CLK_SAI4_ROOT>,
 581                                          <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
 582                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 583                                 dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
 584                                 dma-names = "rx", "tx";
 585                                 status = "disabled";
 586                         };
 587
 588                         gpio1: gpio@30200000 {
 589                                 compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
 590                                 reg = <0x30200000 0x10000>;
 591                                 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
 592                                              <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 593                                 clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
 594                                 gpio-controller;
 595                                 #gpio-cells = <2>;
 596                                 interrupt-controller;
 597                                 #interrupt-cells = <2>;
 598                                 gpio-ranges = <&iomuxc 0 10 30>;
 599                         };
 600
 601                         gpio2: gpio@30210000 {
 602                                 compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
 603                                 reg = <0x30210000 0x10000>;
 604                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 605                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 606                                 clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
 607                                 gpio-controller;
 608                                 #gpio-cells = <2>;
 609                                 interrupt-controller;
 610                                 #interrupt-cells = <2>;
 611                                 gpio-ranges = <&iomuxc 0 40 21>;
 612                         };
 613
 614                         gpio3: gpio@30220000 {
 615                                 compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
 616                                 reg = <0x30220000 0x10000>;
 617                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 618                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 619                                 clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
 620                                 gpio-controller;
 621                                 #gpio-cells = <2>;
 622                                 interrupt-controller;
 623                                 #interrupt-cells = <2>;
 624                                 gpio-ranges = <&iomuxc 0 61 26>;
 625                         };
 626
 627                         gpio4: gpio@30230000 {
 628                                 compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
 629                                 reg = <0x30230000 0x10000>;
 630                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 631                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 632                                 clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
 633                                 gpio-controller;
 634                                 #gpio-cells = <2>;
 635                                 interrupt-controller;
 636                                 #interrupt-cells = <2>;
 637                                 gpio-ranges = <&iomuxc 0 87 32>;
 638                         };
 639
 640                         gpio5: gpio@30240000 {
 641                                 compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
 642                                 reg = <0x30240000 0x10000>;
 643                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 644                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 645                                 clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
 646                                 gpio-controller;
 647                                 #gpio-cells = <2>;
 648                                 interrupt-controller;
 649                                 #interrupt-cells = <2>;
 650                                 gpio-ranges = <&iomuxc 0 119 30>;
 651                         };
 652
 653                         tmu: tmu@30260000 {
 654                                 compatible = "fsl,imx8mq-tmu";
 655                                 reg = <0x30260000 0x10000>;
 656                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 657                                 clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
 658                                 little-endian;
 659                                 fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
 660                                 fsl,tmu-calibration = <0x00000000 0x00000023>,
 661                                                       <0x00000001 0x00000029>,
 662                                                       <0x00000002 0x0000002f>,
 663                                                       <0x00000003 0x00000035>,
 664                                                       <0x00000004 0x0000003d>,
 665                                                       <0x00000005 0x00000043>,
 666                                                       <0x00000006 0x0000004b>,
 667                                                       <0x00000007 0x00000051>,
 668                                                       <0x00000008 0x00000057>,
 669                                                       <0x00000009 0x0000005f>,
 670                                                       <0x0000000a 0x00000067>,
 671                                                       <0x0000000b 0x0000006f>,
 672
 673                                                       <0x00010000 0x0000001b>,
 674                                                       <0x00010001 0x00000023>,
 675                                                       <0x00010002 0x0000002b>,
 676                                                       <0x00010003 0x00000033>,
 677                                                       <0x00010004 0x0000003b>,
 678                                                       <0x00010005 0x00000043>,
 679                                                       <0x00010006 0x0000004b>,
 680                                                       <0x00010007 0x00000055>,
 681                                                       <0x00010008 0x0000005d>,
 682                                                       <0x00010009 0x00000067>,
 683                                                       <0x0001000a 0x00000070>,
 684
 685                                                       <0x00020000 0x00000017>,
 686                                                       <0x00020001 0x00000023>,
 687                                                       <0x00020002 0x0000002d>,
 688                                                       <0x00020003 0x00000037>,
 689                                                       <0x00020004 0x00000041>,
 690                                                       <0x00020005 0x0000004b>,
 691                                                       <0x00020006 0x00000057>,
 692                                                       <0x00020007 0x00000063>,
 693                                                       <0x00020008 0x0000006f>,
 694
 695                                                       <0x00030000 0x00000015>,
 696                                                       <0x00030001 0x00000021>,
 697                                                       <0x00030002 0x0000002d>,
 698                                                       <0x00030003 0x00000039>,
 699                                                       <0x00030004 0x00000045>,
 700                                                       <0x00030005 0x00000053>,
 701                                                       <0x00030006 0x0000005f>,
 702                                                       <0x00030007 0x00000071>;
 703                                 #thermal-sensor-cells = <1>;
 704                         };
 705
 706                         wdog1: watchdog@30280000 {
 707                                 compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
 708                                 reg = <0x30280000 0x10000>;
 709                                 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 710                                 clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>;
 711                                 status = "disabled";
 712                         };
 713
 714                         wdog2: watchdog@30290000 {
 715                                 compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
 716                                 reg = <0x30290000 0x10000>;
 717                                 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 718                                 clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>;
 719                                 status = "disabled";
 720                         };
 721
 722                         wdog3: watchdog@302a0000 {
 723                                 compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
 724                                 reg = <0x302a0000 0x10000>;
 725                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 726                                 clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
 727                                 status = "disabled";
 728                         };
 729
 730                         sdma2: dma-controller@302c0000 {
 731                                 compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
 732                                 reg = <0x302c0000 0x10000>;
 733                                 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 734                                 clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
 735                                          <&clk IMX8MQ_CLK_SDMA2_ROOT>;
 736                                 clock-names = "ipg", "ahb";
 737                                 #dma-cells = <3>;
 738                                 fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
 739                         };
 740
 741                         lcdif: lcd-controller@30320000 {
 742                                 compatible = "fsl,imx8mq-lcdif", "fsl,imx6sx-lcdif";
 743                                 reg = <0x30320000 0x10000>;
 744                                 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 745                                 clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
 746                                          <&clk IMX8MQ_CLK_DISP_APB_ROOT>,
 747                                          <&clk IMX8MQ_CLK_DISP_AXI_ROOT>;
 748                                 clock-names = "pix", "axi", "disp_axi";
 749                                 assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
 750                                                   <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
 751                                                   <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
 752                                                   <&clk IMX8MQ_VIDEO_PLL1>;
 753                                 assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
 754                                                   <&clk IMX8MQ_VIDEO_PLL1>,
 755                                                   <&clk IMX8MQ_VIDEO_PLL1_OUT>;
 756                                 assigned-clock-rates = <0>, <0>, <0>, <594000000>;
 757                                 status = "disabled";
 758
 759                                 port {
 760                                         lcdif_mipi_dsi: endpoint {
 761                                                 remote-endpoint = <&mipi_dsi_lcdif_in>;
 762                                         };
 763                                 };
 764                         };
 765
 766                         iomuxc: pinctrl@30330000 {
 767                                 compatible = "fsl,imx8mq-iomuxc";
 768                                 reg = <0x30330000 0x10000>;
 769                         };
 770
 771                         iomuxc_gpr: syscon@30340000 {
 772                                 compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd";
 773                                 reg = <0x30340000 0x10000>;
 774
 775                                 mux: mux-controller {
 776                                         compatible = "mmio-mux";
 777                                         #mux-control-cells = <1>;
 778                                         mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
 779                                 };
 780                         };
 781
 782                         ocotp: efuse@30350000 {
 783                                 compatible = "fsl,imx8mq-ocotp", "syscon";
 784                                 reg = <0x30350000 0x10000>;
 785                                 clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
 786                                 #address-cells = <1>;
 787                                 #size-cells = <1>;
 788
 789                                 /*
 790                                  * The register address below maps to the MX8M
 791                                  * Fusemap Description Table entries this way.
 792                                  * Assuming
 793                                  *   reg = <ADDR SIZE>;
 794                                  * then
 795                                  *   Fuse Address = (ADDR * 4) + 0x400
 796                                  * Note that if SIZE is greater than 4, then
 797                                  * each subsequent fuse is located at offset
 798                                  * +0x10 in Fusemap Description Table (e.g.
 799                                  * reg = <0x4 0x8> describes fuses 0x410 and
 800                                  * 0x420).
 801                                  */
 802                                 imx8mq_uid: soc-uid@4 { /* 0x410-0x420 */
 803                                         reg = <0x4 0x8>;
 804                                 };
 805
 806                                 cpu_speed_grade: speed-grade@10 { /* 0x440 */
 807                                         reg = <0x10 4>;
 808                                 };
 809
 810                                 fec_mac_address: mac-address@90 { /* 0x640 */
 811                                         reg = <0x90 6>;
 812                                 };
 813                         };
 814
 815                         anatop: clock-controller@30360000 {
 816                                 compatible = "fsl,imx8mq-anatop";
 817                                 reg = <0x30360000 0x10000>;
 818                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 819                                 #clock-cells = <1>;
 820                         };
 821
 822                         snvs: snvs@30370000 {
 823                                 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 824                                 reg = <0x30370000 0x10000>;
 825
 826                                 snvs_rtc: snvs-rtc-lp {
 827                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 828                                         regmap = <&snvs>;
 829                                         offset = <0x34>;
 830                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 831                                                 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 832                                         clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
 833                                         clock-names = "snvs-rtc";
 834                                 };
 835
 836                                 snvs_pwrkey: snvs-powerkey {
 837                                         compatible = "fsl,sec-v4.0-pwrkey";
 838                                         regmap = <&snvs>;
 839                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 840                                         clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
 841                                         clock-names = "snvs-pwrkey";
 842                                         linux,keycode = <KEY_POWER>;
 843                                         wakeup-source;
 844                                         status = "disabled";
 845                                 };
 846                         };
 847
 848                         clk: clock-controller@30380000 {
 849                                 compatible = "fsl,imx8mq-ccm";
 850                                 reg = <0x30380000 0x10000>;
 851                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
 852                                              <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 853                                 #clock-cells = <1>;
 854                                 clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
 855                                          <&clk_ext1>, <&clk_ext2>,
 856                                          <&clk_ext3>, <&clk_ext4>;
 857                                 clock-names = "ckil", "osc_25m", "osc_27m",
 858                                               "clk_ext1", "clk_ext2",
 859                                               "clk_ext3", "clk_ext4";
 860                                 assigned-clocks = <&clk IMX8MQ_CLK_A53_SRC>,
 861                                                   <&clk IMX8MQ_CLK_A53_CORE>,
 862                                                   <&clk IMX8MQ_CLK_NOC>,
 863                                                   <&clk IMX8MQ_CLK_AUDIO_AHB>,
 864                                                   <&clk IMX8MQ_AUDIO_PLL1_BYPASS>,
 865                                                   <&clk IMX8MQ_AUDIO_PLL2_BYPASS>,
 866                                                   <&clk IMX8MQ_AUDIO_PLL1>,
 867                                                   <&clk IMX8MQ_AUDIO_PLL2>;
 868                                 assigned-clock-rates = <0>, <0>,
 869                                                        <800000000>,
 870                                                        <0>,
 871                                                        <0>,
 872                                                        <0>,
 873                                                        <786432000>,
 874                                                        <722534400>;
 875                                 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>,
 876                                                          <&clk IMX8MQ_ARM_PLL_OUT>,
 877                                                          <0>,
 878                                                          <&clk IMX8MQ_SYS2_PLL_500M>,
 879                                                          <&clk IMX8MQ_AUDIO_PLL1>,
 880                                                          <&clk IMX8MQ_AUDIO_PLL2>;
 881                         };
 882
 883                         src: reset-controller@30390000 {
 884                                 compatible = "fsl,imx8mq-src", "syscon";
 885                                 reg = <0x30390000 0x10000>;
 886                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 887                                 #reset-cells = <1>;
 888                         };
 889
 890                         gpc: gpc@303a0000 {
 891                                 compatible = "fsl,imx8mq-gpc";
 892                                 reg = <0x303a0000 0x10000>;
 893                                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 894                                 interrupt-parent = <&gic>;
 895                                 interrupt-controller;
 896                                 #interrupt-cells = <3>;
 897
 898                                 pgc {
 899                                         #address-cells = <1>;
 900                                         #size-cells = <0>;
 901
 902                                         pgc_mipi: power-domain@0 {
 903                                                 #power-domain-cells = <0>;
 904                                                 reg = <IMX8M_POWER_DOMAIN_MIPI>;
 905                                         };
 906
 907                                         /*
 908                                          * As per comment in ATF source code:
 909                                          *
 910                                          * PCIE1 and PCIE2 share the
 911                                          * same reset signal, if we
 912                                          * power down PCIE2, PCIE1
 913                                          * will be held in reset too.
 914                                          *
 915                                          * So instead of creating two
 916                                          * separate power domains for
 917                                          * PCIE1 and PCIE2 we create a
 918                                          * link between both and use
 919                                          * it as a shared PCIE power
 920                                          * domain.
 921                                          */
 922                                         pgc_pcie: power-domain@1 {
 923                                                 #power-domain-cells = <0>;
 924                                                 reg = <IMX8M_POWER_DOMAIN_PCIE1>;
 925                                                 power-domains = <&pgc_pcie2>;
 926                                         };
 927
 928                                         pgc_otg1: power-domain@2 {
 929                                                 #power-domain-cells = <0>;
 930                                                 reg = <IMX8M_POWER_DOMAIN_USB_OTG1>;
 931                                         };
 932
 933                                         pgc_otg2: power-domain@3 {
 934                                                 #power-domain-cells = <0>;
 935                                                 reg = <IMX8M_POWER_DOMAIN_USB_OTG2>;
 936                                         };
 937
 938                                         pgc_ddr1: power-domain@4 {
 939                                                 #power-domain-cells = <0>;
 940                                                 reg = <IMX8M_POWER_DOMAIN_DDR1>;
 941                                         };
 942
 943                                         pgc_gpu: power-domain@5 {
 944                                                 #power-domain-cells = <0>;
 945                                                 reg = <IMX8M_POWER_DOMAIN_GPU>;
 946                                                 clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
 947                                                          <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
 948                                                          <&clk IMX8MQ_CLK_GPU_AXI>,
 949                                                          <&clk IMX8MQ_CLK_GPU_AHB>;
 950                                         };
 951
 952                                         pgc_vpu: power-domain@6 {
 953                                                 #power-domain-cells = <0>;
 954                                                 reg = <IMX8M_POWER_DOMAIN_VPU>;
 955                                                 clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
 956                                                          <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
 957                                                          <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
 958                                                 assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
 959                                                                   <&clk IMX8MQ_CLK_VPU_G2>,
 960                                                                   <&clk IMX8MQ_CLK_VPU_BUS>,
 961                                                                   <&clk IMX8MQ_VPU_PLL_BYPASS>;
 962                                                 assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
 963                                                                          <&clk IMX8MQ_VPU_PLL_OUT>,
 964                                                                          <&clk IMX8MQ_SYS1_PLL_800M>,
 965                                                                          <&clk IMX8MQ_VPU_PLL>;
 966                                                 assigned-clock-rates = <600000000>,
 967                                                                        <300000000>,
 968                                                                        <800000000>,
 969                                                                        <0>;
 970                                         };
 971
 972                                         pgc_disp: power-domain@7 {
 973                                                 #power-domain-cells = <0>;
 974                                                 reg = <IMX8M_POWER_DOMAIN_DISP>;
 975                                         };
 976
 977                                         pgc_mipi_csi1: power-domain@8 {
 978                                                 #power-domain-cells = <0>;
 979                                                 reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>;
 980                                         };
 981
 982                                         pgc_mipi_csi2: power-domain@9 {
 983                                                 #power-domain-cells = <0>;
 984                                                 reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>;
 985                                         };
 986
 987                                         pgc_pcie2: power-domain@a {
 988                                                 #power-domain-cells = <0>;
 989                                                 reg = <IMX8M_POWER_DOMAIN_PCIE2>;
 990                                         };
 991                                 };
 992                         };
 993                 };
 994
 995                 aips2: bus@30400000 { /* AIPS2 */
 996                         compatible = "fsl,aips-bus", "simple-bus";
 997                         reg = <0x30400000 0x400000>;
 998                         #address-cells = <1>;
 999                         #size-cells = <1>;
1000                         ranges = <0x30400000 0x30400000 0x400000>;
1001
1002                         pwm1: pwm@30660000 {
1003                                 compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
1004                                 reg = <0x30660000 0x10000>;
1005                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
1006                                 clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
1007                                          <&clk IMX8MQ_CLK_PWM1_ROOT>;
1008                                 clock-names = "ipg", "per";
1009                                 #pwm-cells = <3>;
1010                                 status = "disabled";
1011                         };
1012
1013                         pwm2: pwm@30670000 {
1014                                 compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
1015                                 reg = <0x30670000 0x10000>;
1016                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
1017                                 clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
1018                                          <&clk IMX8MQ_CLK_PWM2_ROOT>;
1019                                 clock-names = "ipg", "per";
1020                                 #pwm-cells = <3>;
1021                                 status = "disabled";
1022                         };
1023
1024                         pwm3: pwm@30680000 {
1025                                 compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
1026                                 reg = <0x30680000 0x10000>;
1027                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
1028                                 clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
1029                                          <&clk IMX8MQ_CLK_PWM3_ROOT>;
1030                                 clock-names = "ipg", "per";
1031                                 #pwm-cells = <3>;
1032                                 status = "disabled";
1033                         };
1034
1035                         pwm4: pwm@30690000 {
1036                                 compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
1037                                 reg = <0x30690000 0x10000>;
1038                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
1039                                 clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
1040                                          <&clk IMX8MQ_CLK_PWM4_ROOT>;
1041                                 clock-names = "ipg", "per";
1042                                 #pwm-cells = <3>;
1043                                 status = "disabled";
1044                         };
1045
1046                         system_counter: timer@306a0000 {
1047                                 compatible = "nxp,sysctr-timer";
1048                                 reg = <0x306a0000 0x20000>;
1049                                 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
1050                                 clocks = <&osc_25m>;
1051                                 clock-names = "per";
1052                         };
1053                 };
1054
1055                 aips3: bus@30800000 { /* AIPS3 */
1056                         compatible = "fsl,aips-bus", "simple-bus";
1057                         reg = <0x30800000 0x400000>;
1058                         #address-cells = <1>;
1059                         #size-cells = <1>;
1060                         ranges = <0x30800000 0x30800000 0x400000>,
1061                                  <0x08000000 0x08000000 0x10000000>;
1062
1063                         spdif1: spdif@30810000 {
1064                                 compatible = "fsl,imx35-spdif";
1065                                 reg = <0x30810000 0x10000>;
1066                                 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1067                                 clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
1068                                         <&clk IMX8MQ_CLK_25M>, /* rxtx0 */
1069                                         <&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */
1070                                         <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
1071                                         <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
1072                                         <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
1073                                         <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
1074                                         <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
1075                                         <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
1076                                         <&clk IMX8MQ_CLK_DUMMY>; /* spba */
1077                                 clock-names = "core", "rxtx0",
1078                                               "rxtx1", "rxtx2",
1079                                               "rxtx3", "rxtx4",
1080                                               "rxtx5", "rxtx6",
1081                                               "rxtx7", "spba";
1082                                 dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>;
1083                                 dma-names = "rx", "tx";
1084                                 status = "disabled";
1085                         };
1086
1087                         ecspi1: spi@30820000 {
1088                                 #address-cells = <1>;
1089                                 #size-cells = <0>;
1090                                 compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
1091                                 reg = <0x30820000 0x10000>;
1092                                 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
1093                                 clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
1094                                          <&clk IMX8MQ_CLK_ECSPI1_ROOT>;
1095                                 clock-names = "ipg", "per";
1096                                 dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
1097                                 dma-names = "rx", "tx";
1098                                 status = "disabled";
1099                         };
1100
1101                         ecspi2: spi@30830000 {
1102                                 #address-cells = <1>;
1103                                 #size-cells = <0>;
1104                                 compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
1105                                 reg = <0x30830000 0x10000>;
1106                                 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
1107                                 clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
1108                                          <&clk IMX8MQ_CLK_ECSPI2_ROOT>;
1109                                 clock-names = "ipg", "per";
1110                                 dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
1111                                 dma-names = "rx", "tx";
1112                                 status = "disabled";
1113                         };
1114
1115                         ecspi3: spi@30840000 {
1116                                 #address-cells = <1>;
1117                                 #size-cells = <0>;
1118                                 compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
1119                                 reg = <0x30840000 0x10000>;
1120                                 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
1121                                 clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
1122                                          <&clk IMX8MQ_CLK_ECSPI3_ROOT>;
1123                                 clock-names = "ipg", "per";
1124                                 dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
1125                                 dma-names = "rx", "tx";
1126                                 status = "disabled";
1127                         };
1128
1129                         uart1: serial@30860000 {
1130                                 compatible = "fsl,imx8mq-uart",
1131                                              "fsl,imx6q-uart";
1132                                 reg = <0x30860000 0x10000>;
1133                                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
1134                                 clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
1135                                          <&clk IMX8MQ_CLK_UART1_ROOT>;
1136                                 clock-names = "ipg", "per";
1137                                 dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
1138                                 dma-names = "rx", "tx";
1139                                 status = "disabled";
1140                         };
1141
1142                         uart3: serial@30880000 {
1143                                 compatible = "fsl,imx8mq-uart",
1144                                              "fsl,imx6q-uart";
1145                                 reg = <0x30880000 0x10000>;
1146                                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
1147                                 clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
1148                                          <&clk IMX8MQ_CLK_UART3_ROOT>;
1149                                 clock-names = "ipg", "per";
1150                                 dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
1151                                 dma-names = "rx", "tx";
1152                                 status = "disabled";
1153                         };
1154
1155                         uart2: serial@30890000 {
1156                                 compatible = "fsl,imx8mq-uart",
1157                                              "fsl,imx6q-uart";
1158                                 reg = <0x30890000 0x10000>;
1159                                 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
1160                                 clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
1161                                          <&clk IMX8MQ_CLK_UART2_ROOT>;
1162                                 clock-names = "ipg", "per";
1163                                 dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
1164                                 dma-names = "rx", "tx";
1165                                 status = "disabled";
1166                         };
1167
1168                         spdif2: spdif@308a0000 {
1169                                 compatible = "fsl,imx35-spdif";
1170                                 reg = <0x308a0000 0x10000>;
1171                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1172                                 clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
1173                                         <&clk IMX8MQ_CLK_25M>, /* rxtx0 */
1174                                         <&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */
1175                                         <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
1176                                         <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
1177                                         <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
1178                                         <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
1179                                         <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
1180                                         <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
1181                                         <&clk IMX8MQ_CLK_DUMMY>; /* spba */
1182                                 clock-names = "core", "rxtx0",
1183                                               "rxtx1", "rxtx2",
1184                                               "rxtx3", "rxtx4",
1185                                               "rxtx5", "rxtx6",
1186                                               "rxtx7", "spba";
1187                                 dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>;
1188                                 dma-names = "rx", "tx";
1189                                 status = "disabled";
1190                         };
1191
1192                         sai2: sai@308b0000 {
1193                                 #sound-dai-cells = <0>;
1194                                 compatible = "fsl,imx8mq-sai";
1195                                 reg = <0x308b0000 0x10000>;
1196                                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1197                                 clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
1198                                          <&clk IMX8MQ_CLK_SAI2_ROOT>,
1199                                          <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
1200                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
1201                                 dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
1202                                 dma-names = "rx", "tx";
1203                                 status = "disabled";
1204                         };
1205
1206                         sai3: sai@308c0000 {
1207                                 #sound-dai-cells = <0>;
1208                                 compatible = "fsl,imx8mq-sai";
1209                                 reg = <0x308c0000 0x10000>;
1210                                 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
1211                                 clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
1212                                          <&clk IMX8MQ_CLK_SAI3_ROOT>,
1213                                          <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
1214                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
1215                                 dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
1216                                 dma-names = "rx", "tx";
1217                                 status = "disabled";
1218                         };
1219
1220                         crypto: crypto@30900000 {
1221                                 compatible = "fsl,sec-v4.0";
1222                                 #address-cells = <1>;
1223                                 #size-cells = <1>;
1224                                 reg = <0x30900000 0x40000>;
1225                                 ranges = <0 0x30900000 0x40000>;
1226                                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
1227                                 clocks = <&clk IMX8MQ_CLK_AHB>,
1228                                          <&clk IMX8MQ_CLK_IPG_ROOT>;
1229                                 clock-names = "aclk", "ipg";
1230
1231                                 sec_jr0: jr@1000 {
1232                                         compatible = "fsl,sec-v4.0-job-ring";
1233                                         reg = <0x1000 0x1000>;
1234                                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
1235                                         status = "disabled";
1236                                 };
1237
1238                                 sec_jr1: jr@2000 {
1239                                         compatible = "fsl,sec-v4.0-job-ring";
1240                                         reg = <0x2000 0x1000>;
1241                                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
1242                                 };
1243
1244                                 sec_jr2: jr@3000 {
1245                                         compatible = "fsl,sec-v4.0-job-ring";
1246                                         reg = <0x3000 0x1000>;
1247                                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
1248                                 };
1249                         };
1250
1251                         mipi_dsi: dsi@30a00000 {
1252                                 compatible = "fsl,imx8mq-nwl-dsi";
1253                                 reg = <0x30a00000 0x300>;
1254                                 #address-cells = <1>;
1255                                 #size-cells = <0>;
1256                                 clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
1257                                          <&clk IMX8MQ_CLK_DSI_AHB>,
1258                                          <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
1259                                          <&clk IMX8MQ_CLK_DSI_PHY_REF>,
1260                                          <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
1261                                 clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
1262                                 assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>,
1263                                                   <&clk IMX8MQ_CLK_DSI_CORE>,
1264                                                   <&clk IMX8MQ_CLK_DSI_IPG_DIV>;
1265                                 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>,
1266                                                          <&clk IMX8MQ_SYS1_PLL_266M>;
1267                                 assigned-clock-rates = <80000000>, <266000000>, <20000000>;
1268                                 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
1269                                 mux-controls = <&mux 0>;
1270                                 power-domains = <&pgc_mipi>;
1271                                 phys = <&dphy>;
1272                                 phy-names = "dphy";
1273                                 resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
1274                                          <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
1275                                          <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
1276                                          <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
1277                                 reset-names = "byte", "dpi", "esc", "pclk";
1278                                 status = "disabled";
1279
1280                                 ports {
1281                                         #address-cells = <1>;
1282                                         #size-cells = <0>;
1283
1284                                         port@0 {
1285                                                 reg = <0>;
1286                                                 #address-cells = <1>;
1287                                                 #size-cells = <0>;
1288                                                 mipi_dsi_lcdif_in: endpoint@0 {
1289                                                         reg = <0>;
1290                                                         remote-endpoint = <&lcdif_mipi_dsi>;
1291                                                 };
1292                                         };
1293                                 };
1294                         };
1295
1296                         dphy: dphy@30a00300 {
1297                                 compatible = "fsl,imx8mq-mipi-dphy";
1298                                 reg = <0x30a00300 0x100>;
1299                                 clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
1300                                 clock-names = "phy_ref";
1301                                 assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
1302                                                   <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
1303                                                   <&clk IMX8MQ_CLK_DSI_PHY_REF>,
1304                                                   <&clk IMX8MQ_VIDEO_PLL1>;
1305                                 assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
1306                                                   <&clk IMX8MQ_VIDEO_PLL1>,
1307                                                   <&clk IMX8MQ_VIDEO_PLL1_OUT>;
1308                                 assigned-clock-rates = <0>, <0>, <24000000>, <594000000>;
1309                                 #phy-cells = <0>;
1310                                 power-domains = <&pgc_mipi>;
1311                                 status = "disabled";
1312                         };
1313
1314                         i2c1: i2c@30a20000 {
1315                                 compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1316                                 reg = <0x30a20000 0x10000>;
1317                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1318                                 clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>;
1319                                 #address-cells = <1>;
1320                                 #size-cells = <0>;
1321                                 status = "disabled";
1322                         };
1323
1324                         i2c2: i2c@30a30000 {
1325                                 compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1326                                 reg = <0x30a30000 0x10000>;
1327                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
1328                                 clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>;
1329                                 #address-cells = <1>;
1330                                 #size-cells = <0>;
1331                                 status = "disabled";
1332                         };
1333
1334                         i2c3: i2c@30a40000 {
1335                                 compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1336                                 reg = <0x30a40000 0x10000>;
1337                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
1338                                 clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>;
1339                                 #address-cells = <1>;
1340                                 #size-cells = <0>;
1341                                 status = "disabled";
1342                         };
1343
1344                         i2c4: i2c@30a50000 {
1345                                 compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1346                                 reg = <0x30a50000 0x10000>;
1347                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
1348                                 clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>;
1349                                 #address-cells = <1>;
1350                                 #size-cells = <0>;
1351                                 status = "disabled";
1352                         };
1353
1354                         uart4: serial@30a60000 {
1355                                 compatible = "fsl,imx8mq-uart",
1356                                              "fsl,imx6q-uart";
1357                                 reg = <0x30a60000 0x10000>;
1358                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1359                                 clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
1360                                          <&clk IMX8MQ_CLK_UART4_ROOT>;
1361                                 clock-names = "ipg", "per";
1362                                 dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
1363                                 dma-names = "rx", "tx";
1364                                 status = "disabled";
1365                         };
1366
1367                         mipi_csi1: csi@30a70000 {
1368                                 compatible = "fsl,imx8mq-mipi-csi2";
1369                                 reg = <0x30a70000 0x1000>;
1370                                 clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
1371                                    <&clk IMX8MQ_CLK_CSI1_ESC>,
1372                                    <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
1373                                 clock-names = "core", "esc", "ui";
1374                                 assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
1375                                     <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
1376                                     <&clk IMX8MQ_CLK_CSI1_ESC>;
1377                                 assigned-clock-rates = <266000000>, <333000000>, <66000000>;
1378                                 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
1379                                         <&clk IMX8MQ_SYS2_PLL_1000M>,
1380                                         <&clk IMX8MQ_SYS1_PLL_800M>;
1381                                 power-domains = <&pgc_mipi_csi1>;
1382                                 resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
1383                                          <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
1384                                          <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
1385                                 fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
1386                                 interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
1387                                 interconnect-names = "dram";
1388                                 status = "disabled";
1389
1390                                 ports {
1391                                         #address-cells = <1>;
1392                                         #size-cells = <0>;
1393
1394                                         port@1 {
1395                                                 reg = <1>;
1396
1397                                                 csi1_mipi_ep: endpoint {
1398                                                         remote-endpoint = <&csi1_ep>;
1399                                                 };
1400                                         };
1401                                 };
1402                         };
1403
1404                         csi1: csi@30a90000 {
1405                                 compatible = "fsl,imx8mq-csi";
1406                                 reg = <0x30a90000 0x10000>;
1407                                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
1408                                 clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
1409                                 clock-names = "mclk";
1410                                 status = "disabled";
1411
1412                                 port {
1413                                         csi1_ep: endpoint {
1414                                                 remote-endpoint = <&csi1_mipi_ep>;
1415                                         };
1416                                 };
1417                         };
1418
1419                         mipi_csi2: csi@30b60000 {
1420                                 compatible = "fsl,imx8mq-mipi-csi2";
1421                                 reg = <0x30b60000 0x1000>;
1422                                 clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
1423                                    <&clk IMX8MQ_CLK_CSI2_ESC>,
1424                                    <&clk IMX8MQ_CLK_CSI2_PHY_REF>;
1425                                 clock-names = "core", "esc", "ui";
1426                                 assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
1427                                     <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
1428                                     <&clk IMX8MQ_CLK_CSI2_ESC>;
1429                                 assigned-clock-rates = <266000000>, <333000000>, <66000000>;
1430                                 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
1431                                         <&clk IMX8MQ_SYS2_PLL_1000M>,
1432                                         <&clk IMX8MQ_SYS1_PLL_800M>;
1433                                 power-domains = <&pgc_mipi_csi2>;
1434                                 resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>,
1435                                          <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>,
1436                                          <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>;
1437                                 fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>;
1438                                 interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
1439                                 interconnect-names = "dram";
1440                                 status = "disabled";
1441
1442                                 ports {
1443                                         #address-cells = <1>;
1444                                         #size-cells = <0>;
1445
1446                                         port@1 {
1447                                                 reg = <1>;
1448
1449                                                 csi2_mipi_ep: endpoint {
1450                                                         remote-endpoint = <&csi2_ep>;
1451                                                 };
1452                                         };
1453                                 };
1454                         };
1455
1456                         csi2: csi@30b80000 {
1457                                 compatible = "fsl,imx8mq-csi";
1458                                 reg = <0x30b80000 0x10000>;
1459                                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1460                                 clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
1461                                 clock-names = "mclk";
1462                                 status = "disabled";
1463
1464                                 port {
1465                                         csi2_ep: endpoint {
1466                                                 remote-endpoint = <&csi2_mipi_ep>;
1467                                         };
1468                                 };
1469                         };
1470
1471                         mu: mailbox@30aa0000 {
1472                                 compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
1473                                 reg = <0x30aa0000 0x10000>;
1474                                 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
1475                                 clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
1476                                 #mbox-cells = <2>;
1477                         };
1478
1479                         usdhc1: mmc@30b40000 {
1480                                 compatible = "fsl,imx8mq-usdhc",
1481                                              "fsl,imx7d-usdhc";
1482                                 reg = <0x30b40000 0x10000>;
1483                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
1484                                 clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
1485                                          <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
1486                                          <&clk IMX8MQ_CLK_USDHC1_ROOT>;
1487                                 clock-names = "ipg", "ahb", "per";
1488                                 fsl,tuning-start-tap = <20>;
1489                                 fsl,tuning-step = <2>;
1490                                 bus-width = <4>;
1491                                 status = "disabled";
1492                         };
1493
1494                         usdhc2: mmc@30b50000 {
1495                                 compatible = "fsl,imx8mq-usdhc",
1496                                              "fsl,imx7d-usdhc";
1497                                 reg = <0x30b50000 0x10000>;
1498                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1499                                 clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
1500                                          <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
1501                                          <&clk IMX8MQ_CLK_USDHC2_ROOT>;
1502                                 clock-names = "ipg", "ahb", "per";
1503                                 fsl,tuning-start-tap = <20>;
1504                                 fsl,tuning-step = <2>;
1505                                 bus-width = <4>;
1506                                 status = "disabled";
1507                         };
1508
1509                         qspi0: spi@30bb0000 {
1510                                 #address-cells = <1>;
1511                                 #size-cells = <0>;
1512                                 compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi";
1513                                 reg = <0x30bb0000 0x10000>,
1514                                       <0x08000000 0x10000000>;
1515                                 reg-names = "QuadSPI", "QuadSPI-memory";
1516                                 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1517                                 clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>,
1518                                          <&clk IMX8MQ_CLK_QSPI_ROOT>;
1519                                 clock-names = "qspi_en", "qspi";
1520                                 status = "disabled";
1521                         };
1522
1523                         sdma1: dma-controller@30bd0000 {
1524                                 compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
1525                                 reg = <0x30bd0000 0x10000>;
1526                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1527                                 clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
1528                                          <&clk IMX8MQ_CLK_AHB>;
1529                                 clock-names = "ipg", "ahb";
1530                                 #dma-cells = <3>;
1531                                 fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
1532                         };
1533
1534                         fec1: ethernet@30be0000 {
1535                                 compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
1536                                 reg = <0x30be0000 0x10000>;
1537                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1538                                              <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1539                                              <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1540                                              <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1541                                 clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
1542                                          <&clk IMX8MQ_CLK_ENET1_ROOT>,
1543                                          <&clk IMX8MQ_CLK_ENET_TIMER>,
1544                                          <&clk IMX8MQ_CLK_ENET_REF>,
1545                                          <&clk IMX8MQ_CLK_ENET_PHY_REF>;
1546                                 clock-names = "ipg", "ahb", "ptp",
1547                                               "enet_clk_ref", "enet_out";
1548                                 assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI>,
1549                                                   <&clk IMX8MQ_CLK_ENET_TIMER>,
1550                                                   <&clk IMX8MQ_CLK_ENET_REF>,
1551                                                   <&clk IMX8MQ_CLK_ENET_PHY_REF>;
1552                                 assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
1553                                                          <&clk IMX8MQ_SYS2_PLL_100M>,
1554                                                          <&clk IMX8MQ_SYS2_PLL_125M>,
1555                                                          <&clk IMX8MQ_SYS2_PLL_50M>;
1556                                 assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
1557                                 fsl,num-tx-queues = <3>;
1558                                 fsl,num-rx-queues = <3>;
1559                                 nvmem-cells = <&fec_mac_address>;
1560                                 nvmem-cell-names = "mac-address";
1561                                 fsl,stop-mode = <&iomuxc_gpr 0x10 3>;
1562                                 status = "disabled";
1563                         };
1564                 };
1565
1566                 noc: interconnect@32700000 {
1567                         compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
1568                         reg = <0x32700000 0x100000>;
1569                         clocks = <&clk IMX8MQ_CLK_NOC>;
1570                         fsl,ddrc = <&ddrc>;
1571                         #interconnect-cells = <1>;
1572                         operating-points-v2 = <&noc_opp_table>;
1573
1574                         noc_opp_table: opp-table {
1575                                 compatible = "operating-points-v2";
1576
1577                                 opp-133000000 {
1578                                         opp-hz = /bits/ 64 <133333333>;
1579                                 };
1580
1581                                 opp-400000000 {
1582                                         opp-hz = /bits/ 64 <400000000>;
1583                                 };
1584
1585                                 opp-800000000 {
1586                                         opp-hz = /bits/ 64 <800000000>;
1587                                 };
1588                         };
1589                 };
1590
1591                 aips4: bus@32c00000 { /* AIPS4 */
1592                         compatible = "fsl,aips-bus", "simple-bus";
1593                         reg = <0x32c00000 0x400000>;
1594                         #address-cells = <1>;
1595                         #size-cells = <1>;
1596                         ranges = <0x32c00000 0x32c00000 0x400000>;
1597
1598                         irqsteer: interrupt-controller@32e2d000 {
1599                                 compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
1600                                 reg = <0x32e2d000 0x1000>;
1601                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1602                                 clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
1603                                 clock-names = "ipg";
1604                                 fsl,channel = <0>;
1605                                 fsl,num-irqs = <64>;
1606                                 interrupt-controller;
1607                                 #interrupt-cells = <1>;
1608                         };
1609                 };
1610
1611                 gpu: gpu@38000000 {
1612                         compatible = "vivante,gc";
1613                         reg = <0x38000000 0x40000>;
1614                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
1615                         clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
1616                                  <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
1617                                  <&clk IMX8MQ_CLK_GPU_AXI>,
1618                                  <&clk IMX8MQ_CLK_GPU_AHB>;
1619                         clock-names = "core", "shader", "bus", "reg";
1620                         #cooling-cells = <2>;
1621                         assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
1622                                           <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
1623                                           <&clk IMX8MQ_CLK_GPU_AXI>,
1624                                           <&clk IMX8MQ_CLK_GPU_AHB>,
1625                                           <&clk IMX8MQ_GPU_PLL_BYPASS>;
1626                         assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>,
1627                                                  <&clk IMX8MQ_GPU_PLL_OUT>,
1628                                                  <&clk IMX8MQ_GPU_PLL_OUT>,
1629                                                  <&clk IMX8MQ_GPU_PLL_OUT>,
1630                                                  <&clk IMX8MQ_GPU_PLL>;
1631                         assigned-clock-rates = <800000000>, <800000000>,
1632                                                <800000000>, <800000000>, <0>;
1633                         power-domains = <&pgc_gpu>;
1634                 };
1635
1636                 usb_dwc3_0: usb@38100000 {
1637                         compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
1638                         reg = <0x38100000 0x10000>;
1639                         clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
1640                                  <&clk IMX8MQ_CLK_USB_CORE_REF>,
1641                                  <&clk IMX8MQ_CLK_32K>;
1642                         clock-names = "bus_early", "ref", "suspend";
1643                         assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
1644                                           <&clk IMX8MQ_CLK_USB_CORE_REF>;
1645                         assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
1646                                                  <&clk IMX8MQ_SYS1_PLL_100M>;
1647                         assigned-clock-rates = <500000000>, <100000000>;
1648                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1649                         phys = <&usb3_phy0>, <&usb3_phy0>;
1650                         phy-names = "usb2-phy", "usb3-phy";
1651                         power-domains = <&pgc_otg1>;
1652                         snps,parkmode-disable-ss-quirk;
1653                         status = "disabled";
1654                 };
1655
1656                 usb3_phy0: usb-phy@381f0040 {
1657                         compatible = "fsl,imx8mq-usb-phy";
1658                         reg = <0x381f0040 0x40>;
1659                         clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
1660                         clock-names = "phy";
1661                         assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
1662                         assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
1663                         assigned-clock-rates = <100000000>;
1664                         #phy-cells = <0>;
1665                         status = "disabled";
1666                 };
1667
1668                 usb_dwc3_1: usb@38200000 {
1669                         compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
1670                         reg = <0x38200000 0x10000>;
1671                         clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
1672                                  <&clk IMX8MQ_CLK_USB_CORE_REF>,
1673                                  <&clk IMX8MQ_CLK_32K>;
1674                         clock-names = "bus_early", "ref", "suspend";
1675                         assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
1676                                           <&clk IMX8MQ_CLK_USB_CORE_REF>;
1677                         assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
1678                                                  <&clk IMX8MQ_SYS1_PLL_100M>;
1679                         assigned-clock-rates = <500000000>, <100000000>;
1680                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1681                         phys = <&usb3_phy1>, <&usb3_phy1>;
1682                         phy-names = "usb2-phy", "usb3-phy";
1683                         power-domains = <&pgc_otg2>;
1684                         snps,parkmode-disable-ss-quirk;
1685                         status = "disabled";
1686                 };
1687
1688                 usb3_phy1: usb-phy@382f0040 {
1689                         compatible = "fsl,imx8mq-usb-phy";
1690                         reg = <0x382f0040 0x40>;
1691                         clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>;
1692                         clock-names = "phy";
1693                         assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
1694                         assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
1695                         assigned-clock-rates = <100000000>;
1696                         #phy-cells = <0>;
1697                         status = "disabled";
1698                 };
1699
1700                 vpu_g1: video-codec@38300000 {
1701                         compatible = "nxp,imx8mq-vpu-g1";
1702                         reg = <0x38300000 0x10000>;
1703                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1704                         clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
1705                         power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
1706                 };
1707
1708                 vpu_g2: video-codec@38310000 {
1709                         compatible = "nxp,imx8mq-vpu-g2";
1710                         reg = <0x38310000 0x10000>;
1711                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1712                         clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
1713                         power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
1714                 };
1715
1716                 vpu_blk_ctrl: blk-ctrl@38320000 {
1717                         compatible = "fsl,imx8mq-vpu-blk-ctrl";
1718                         reg = <0x38320000 0x100>;
1719                         power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
1720                         power-domain-names = "bus", "g1", "g2";
1721                         clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
1722                                  <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
1723                         clock-names = "g1", "g2";
1724                         #power-domain-cells = <1>;
1725                 };
1726
1727                 pcie0: pcie@33800000 {
1728                         compatible = "fsl,imx8mq-pcie";
1729                         reg = <0x33800000 0x400000>,
1730                               <0x1ff00000 0x80000>;
1731                         reg-names = "dbi", "config";
1732                         #address-cells = <3>;
1733                         #size-cells = <2>;
1734                         device_type = "pci";
1735                         bus-range = <0x00 0xff>;
1736                         ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
1737                                  <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
1738                         num-lanes = <1>;
1739                         interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1740                         interrupt-names = "msi";
1741                         #interrupt-cells = <1>;
1742                         interrupt-map-mask = <0 0 0 0x7>;
1743                         interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1744                                         <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
1745                                         <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1746                                         <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1747                         fsl,max-link-speed = <2>;
1748                         linux,pci-domain = <0>;
1749                         clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
1750                                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
1751                                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
1752                                  <&clk IMX8MQ_CLK_PCIE1_AUX>;
1753                         clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
1754                         power-domains = <&pgc_pcie>;
1755                         resets = <&src IMX8MQ_RESET_PCIEPHY>,
1756                                  <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
1757                                  <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
1758                         reset-names = "pciephy", "apps", "turnoff";
1759                         assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
1760                                           <&clk IMX8MQ_CLK_PCIE1_PHY>,
1761                                           <&clk IMX8MQ_CLK_PCIE1_AUX>;
1762                         assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
1763                                                  <&clk IMX8MQ_SYS2_PLL_100M>,
1764                                                  <&clk IMX8MQ_SYS1_PLL_80M>;
1765                         assigned-clock-rates = <250000000>, <100000000>,
1766                                                <10000000>;
1767                         status = "disabled";
1768                 };
1769
1770                 pcie1: pcie@33c00000 {
1771                         compatible = "fsl,imx8mq-pcie";
1772                         reg = <0x33c00000 0x400000>,
1773                               <0x27f00000 0x80000>;
1774                         reg-names = "dbi", "config";
1775                         #address-cells = <3>;
1776                         #size-cells = <2>;
1777                         device_type = "pci";
1778                         bus-range = <0x00 0xff>;
1779                         ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
1780                                  <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
1781                         num-lanes = <1>;
1782                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
1783                         interrupt-names = "msi";
1784                         #interrupt-cells = <1>;
1785                         interrupt-map-mask = <0 0 0 0x7>;
1786                         interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
1787                                         <0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
1788                                         <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
1789                                         <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
1790                         fsl,max-link-speed = <2>;
1791                         linux,pci-domain = <1>;
1792                         clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
1793                                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
1794                                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
1795                                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
1796                         clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
1797                         power-domains = <&pgc_pcie>;
1798                         resets = <&src IMX8MQ_RESET_PCIEPHY2>,
1799                                  <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
1800                                  <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
1801                         reset-names = "pciephy", "apps", "turnoff";
1802                         assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
1803                                           <&clk IMX8MQ_CLK_PCIE2_PHY>,
1804                                           <&clk IMX8MQ_CLK_PCIE2_AUX>;
1805                         assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
1806                                                  <&clk IMX8MQ_SYS2_PLL_100M>,
1807                                                  <&clk IMX8MQ_SYS1_PLL_80M>;
1808                         assigned-clock-rates = <250000000>, <100000000>,
1809                                                <10000000>;
1810                         status = "disabled";
1811                 };
1812
1813                 pcie1_ep: pcie-ep@33c00000 {
1814                         compatible = "fsl,imx8mq-pcie-ep";
1815                         reg = <0x33c00000 0x000400000>,
1816                               <0x20000000 0x08000000>;
1817                         reg-names = "dbi", "addr_space";
1818                         num-lanes = <1>;
1819                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1820                         interrupt-names = "dma";
1821                         fsl,max-link-speed = <2>;
1822                         clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
1823                                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
1824                                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
1825                                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
1826                         clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
1827                         power-domains = <&pgc_pcie>;
1828                         resets = <&src IMX8MQ_RESET_PCIEPHY2>,
1829                                  <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
1830                                  <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
1831                         reset-names = "pciephy", "apps", "turnoff";
1832                         assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
1833                                           <&clk IMX8MQ_CLK_PCIE2_PHY>,
1834                                           <&clk IMX8MQ_CLK_PCIE2_AUX>;
1835                         assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
1836                                                  <&clk IMX8MQ_SYS2_PLL_100M>,
1837                                                  <&clk IMX8MQ_SYS1_PLL_80M>;
1838                         assigned-clock-rates = <250000000>, <100000000>,
1839                                                <10000000>;
1840                         num-ib-windows = <4>;
1841                         num-ob-windows = <4>;
1842                         status = "disabled";
1843                 };
1844
1845                 gic: interrupt-controller@38800000 {
1846                         compatible = "arm,gic-v3";
1847                         reg = <0x38800000 0x10000>,     /* GIC Dist */
1848                               <0x38880000 0xc0000>,     /* GICR */
1849                               <0x31000000 0x2000>,      /* GICC */
1850                               <0x31010000 0x2000>,      /* GICV */
1851                               <0x31020000 0x2000>;      /* GICH */
1852                         #interrupt-cells = <3>;
1853                         interrupt-controller;
1854                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1855                         interrupt-parent = <&gic>;
1856                 };
1857
1858                 ddrc: memory-controller@3d400000 {
1859                         compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
1860                         reg = <0x3d400000 0x400000>;
1861                         clock-names = "core", "pll", "alt", "apb";
1862                         clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
1863                                  <&clk IMX8MQ_DRAM_PLL_OUT>,
1864                                  <&clk IMX8MQ_CLK_DRAM_ALT>,
1865                                  <&clk IMX8MQ_CLK_DRAM_APB>;
1866                         status = "disabled";
1867                 };
1868
1869                 ddr-pmu@3d800000 {
1870                         compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
1871                         reg = <0x3d800000 0x400000>;
1872                         interrupt-parent = <&gic>;
1873                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1874                 };
1875         };
1876 };