arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2018-2020 Purism SPC
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "dt-bindings/input/input.h"
   9 #include <dt-bindings/interrupt-controller/irq.h>
  10 #include <dt-bindings/leds/common.h>
  11 #include "dt-bindings/pwm/pwm.h"
  12 #include "dt-bindings/usb/pd.h"
  13 #include "imx8mq.dtsi"
  14
  15 / {
  16         model = "Purism Librem 5";
  17         compatible = "purism,librem5", "fsl,imx8mq";
  18         chassis-type = "handset";
  19
  20         backlight_dsi: backlight-dsi {
  21                 compatible = "led-backlight";
  22                 leds = <&led_backlight>;
  23                 brightness-levels = <255>;
  24                 default-brightness-level = <190>;
  25         };
  26
  27         pmic_osc: clock-pmic {
  28                 compatible = "fixed-clock";
  29                 #clock-cells = <0>;
  30                 clock-frequency = <32768>;
  31                 clock-output-names = "pmic_osc";
  32         };
  33
  34         chosen {
  35                 stdout-path = &uart1;
  36         };
  37
  38         gpio-keys {
  39                 compatible = "gpio-keys";
  40                 pinctrl-names = "default";
  41                 pinctrl-0 = <&pinctrl_keys>;
  42
  43                 key-vol-down {
  44                         label = "VOL_DOWN";
  45                         gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_VOLUMEDOWN>;
  47                         debounce-interval = <50>;
  48                         wakeup-source;
  49                 };
  50
  51                 key-vol-up {
  52                         label = "VOL_UP";
  53                         gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
  54                         linux,code = <KEY_VOLUMEUP>;
  55                         debounce-interval = <50>;
  56                         wakeup-source;
  57                 };
  58         };
  59
  60         led-controller {
  61                 compatible = "pwm-leds-multicolor";
  62
  63                 multi-led {
  64                         color = <LED_COLOR_ID_RGB>;
  65                         function = LED_FUNCTION_STATUS;
  66                         max-brightness = <248>;
  67
  68                         led-0 {
  69                                 color = <LED_COLOR_ID_BLUE>;
  70                                 pwms = <&pwm2 0 50000 0>;
  71                         };
  72
  73                         led-1 {
  74                                 color = <LED_COLOR_ID_GREEN>;
  75                                 pwms = <&pwm4 0 50000 0>;
  76                         };
  77
  78                         led-2 {
  79                                 color = <LED_COLOR_ID_RED>;
  80                                 pwms = <&pwm3 0 50000 0>;
  81                         };
  82                 };
  83         };
  84
  85         reg_aud_1v8: regulator-audio-1v8 {
  86                 compatible = "regulator-fixed";
  87                 pinctrl-names = "default";
  88                 pinctrl-0 = <&pinctrl_audiopwr>;
  89                 regulator-name = "AUD_1V8";
  90                 regulator-min-microvolt = <1800000>;
  91                 regulator-max-microvolt = <1800000>;
  92                 gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
  93                 enable-active-high;
  94                 regulator-always-on;
  95         };
  96
  97         reg_mic_2v4: regulator-mic-2v4 {
  98                 compatible = "regulator-fixed";
  99                 regulator-name = "MIC_2V4";
 100                 regulator-min-microvolt = <2400000>;
 101                 regulator-max-microvolt = <2400000>;
 102                 vin-supply = <&reg_aud_1v8>;
 103         };
 104
 105         /*
 106          * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC
 107          * since we can't have it twice in the 2 different regulator nodes.
 108          */
 109         reg_csi_1v8: regulator-csi-1v8 {
 110                 compatible = "regulator-fixed";
 111                 regulator-name = "CAMERA_VDDIO_1V8";
 112                 regulator-min-microvolt = <1800000>;
 113                 regulator-max-microvolt = <1800000>;
 114                 vin-supply = <&reg_vdd_3v3>;
 115                 gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 116                 enable-active-high;
 117         };
 118
 119         /* controlled by the CAMERA_POWER_KEY HKS */
 120         reg_vcam_1v2: regulator-vcam-1v2 {
 121                 compatible = "regulator-fixed";
 122                 regulator-name = "CAMERA_VDDD_1V2";
 123                 regulator-min-microvolt = <1200000>;
 124                 regulator-max-microvolt = <1200000>;
 125                 vin-supply = <&reg_vdd_1v8>;
 126                 enable-active-high;
 127         };
 128
 129         reg_vcam_2v8: regulator-vcam-2v8 {
 130                 compatible = "regulator-fixed";
 131                 regulator-name = "CAMERA_VDDA_2V8";
 132                 regulator-min-microvolt = <2800000>;
 133                 regulator-max-microvolt = <2800000>;
 134                 vin-supply = <&reg_vdd_3v3>;
 135                 gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 136                 enable-active-high;
 137         };
 138
 139         reg_gnss: regulator-gnss {
 140                 compatible = "regulator-fixed";
 141                 pinctrl-names = "default";
 142                 pinctrl-0 = <&pinctrl_gnsspwr>;
 143                 regulator-name = "GNSS";
 144                 regulator-min-microvolt = <3300000>;
 145                 regulator-max-microvolt = <3300000>;
 146                 gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 147                 enable-active-high;
 148         };
 149
 150         reg_hub: regulator-hub {
 151                 compatible = "regulator-fixed";
 152                 pinctrl-names = "default";
 153                 pinctrl-0 = <&pinctrl_hub_pwr>;
 154                 regulator-name = "HUB";
 155                 regulator-min-microvolt = <3300000>;
 156                 regulator-max-microvolt = <3300000>;
 157                 gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 158                 enable-active-high;
 159         };
 160
 161         reg_lcd_1v8: regulator-lcd-1v8 {
 162                 compatible = "regulator-fixed";
 163                 pinctrl-names = "default";
 164                 pinctrl-0 = <&pinctrl_dsien>;
 165                 regulator-name = "LCD_1V8";
 166                 regulator-min-microvolt = <1800000>;
 167                 regulator-max-microvolt = <1800000>;
 168                 vin-supply = <&reg_vdd_1v8>;
 169                 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 170                 enable-active-high;
 171                 /* Otherwise i2c3 is not functional */
 172                 regulator-always-on;
 173         };
 174
 175         reg_lcd_3v4: regulator-lcd-3v4 {
 176                 compatible = "regulator-fixed";
 177                 regulator-name = "LCD_3V4";
 178                 pinctrl-names = "default";
 179                 pinctrl-0 = <&pinctrl_dsibiasen>;
 180                 vin-supply = <&reg_vsys_3v4>;
 181                 gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 182                 enable-active-high;
 183         };
 184
 185         reg_vdd_sen: regulator-vdd-sen {
 186                 compatible = "regulator-fixed";
 187                 regulator-name = "VDD_SEN";
 188                 regulator-min-microvolt = <3300000>;
 189                 regulator-max-microvolt = <3300000>;
 190         };
 191
 192         reg_vdd_1v8: regulator-vdd-1v8 {
 193                 compatible = "regulator-fixed";
 194                 regulator-name = "VDD_1V8";
 195                 regulator-min-microvolt = <1800000>;
 196                 regulator-max-microvolt = <1800000>;
 197                 vin-supply = <&buck7_reg>;
 198         };
 199
 200         reg_vdd_3v3: regulator-vdd-3v3 {
 201                 compatible = "regulator-fixed";
 202                 regulator-name = "VDD_3V3";
 203                 regulator-min-microvolt = <3300000>;
 204                 regulator-max-microvolt = <3300000>;
 205         };
 206
 207         reg_vsys_3v4: regulator-vsys-3v4 {
 208                 compatible = "regulator-fixed";
 209                 regulator-name = "VSYS_3V4";
 210                 regulator-min-microvolt = <3400000>;
 211                 regulator-max-microvolt = <3400000>;
 212                 regulator-always-on;
 213         };
 214
 215         reg_wifi_3v3: regulator-wifi-3v3 {
 216                 compatible = "regulator-fixed";
 217                 pinctrl-names = "default";
 218                 pinctrl-0 = <&pinctrl_wifi_pwr>;
 219                 regulator-name = "3V3_WIFI";
 220                 regulator-min-microvolt = <3300000>;
 221                 regulator-max-microvolt = <3300000>;
 222                 gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>;
 223                 enable-active-high;
 224                 vin-supply = <&reg_vdd_3v3>;
 225         };
 226
 227         sound {
 228                 compatible = "simple-audio-card";
 229                 pinctrl-names = "default";
 230                 pinctrl-0 = <&pinctrl_hp>;
 231                 simple-audio-card,name = "Librem 5";
 232                 simple-audio-card,format = "i2s";
 233                 simple-audio-card,widgets =
 234                         "Headphone", "Headphones",
 235                         "Microphone", "Headset Mic",
 236                         "Microphone", "Digital Mic",
 237                         "Speaker", "Speaker";
 238                 simple-audio-card,routing =
 239                         "Headphones", "HPOUTL",
 240                         "Headphones", "HPOUTR",
 241                         "Speaker", "SPKOUTL",
 242                         "Speaker", "SPKOUTR",
 243                         "Headset Mic", "MICBIAS",
 244                         "IN3R", "Headset Mic",
 245                         "DMICDAT", "Digital Mic";
 246                 simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
 247
 248                 simple-audio-card,cpu {
 249                         sound-dai = <&sai2>;
 250                 };
 251
 252                 simple-audio-card,codec {
 253                         sound-dai = <&codec>;
 254                         clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 255                         frame-master;
 256                         bitclock-master;
 257                 };
 258         };
 259
 260         sound-wwan {
 261                 compatible = "simple-audio-card";
 262                 simple-audio-card,name = "Modem";
 263                 simple-audio-card,format = "i2s";
 264
 265                 simple-audio-card,cpu {
 266                         sound-dai = <&sai6>;
 267                         frame-inversion;
 268                 };
 269
 270                 simple-audio-card,codec {
 271                         sound-dai = <&bm818_codec>;
 272                         frame-master;
 273                         bitclock-master;
 274                 };
 275         };
 276
 277         usdhc2_pwrseq: pwrseq {
 278                 pinctrl-names = "default";
 279                 pinctrl-0 = <&pinctrl_bt>, <&pinctrl_wifi_disable>;
 280                 compatible = "mmc-pwrseq-simple";
 281                 reset-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>,
 282                               <&gpio4 29 GPIO_ACTIVE_HIGH>;
 283         };
 284
 285         bm818_codec: sound-wwan-codec {
 286                 compatible = "broadmobi,bm818", "option,gtm601";
 287                 #sound-dai-cells = <0>;
 288         };
 289
 290         vibrator {
 291                 compatible = "pwm-vibrator";
 292                 pwms = <&pwm1 0 1000000000 0>;
 293                 pwm-names = "enable";
 294                 vcc-supply = <&reg_vdd_3v3>;
 295         };
 296 };
 297
 298 &A53_0 {
 299         cpu-supply = <&buck2_reg>;
 300 };
 301
 302 &A53_1 {
 303         cpu-supply = <&buck2_reg>;
 304 };
 305
 306 &A53_2 {
 307         cpu-supply = <&buck2_reg>;
 308 };
 309
 310 &A53_3 {
 311         cpu-supply = <&buck2_reg>;
 312 };
 313
 314 &csi1 {
 315         status = "okay";
 316 };
 317
 318 &ddrc {
 319         operating-points-v2 = <&ddrc_opp_table>;
 320         status = "okay";
 321
 322         ddrc_opp_table: opp-table {
 323                 compatible = "operating-points-v2";
 324
 325                 opp-25000000 {
 326                         opp-hz = /bits/ 64 <25000000>;
 327                 };
 328
 329                 opp-100000000 {
 330                         opp-hz = /bits/ 64 <100000000>;
 331                 };
 332
 333                 opp-166000000 {
 334                         opp-hz = /bits/ 64 <166935483>;
 335                 };
 336
 337                 opp-800000000 {
 338                         opp-hz = /bits/ 64 <800000000>;
 339                 };
 340         };
 341 };
 342
 343 &dphy {
 344         status = "okay";
 345 };
 346
 347 &ecspi1 {
 348         pinctrl-names = "default";
 349         pinctrl-0 = <&pinctrl_ecspi1>;
 350         cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 351         #address-cells = <1>;
 352         #size-cells = <0>;
 353         status = "okay";
 354
 355         nor_flash: flash@0 {
 356                 compatible = "jedec,spi-nor";
 357                 reg = <0>;
 358                 spi-max-frequency = <1000000>;
 359                 #address-cells = <1>;
 360                 #size-cells = <1>;
 361
 362                 partition@0 {
 363                         label = "protected0";
 364                         reg = <0x0 0x30000>;
 365                         read-only;
 366                 };
 367
 368                 partition@30000 {
 369                         label = "firmware";
 370                         reg = <0x30000 0x1d0000>;
 371                         read-only;
 372                 };
 373         };
 374 };
 375
 376 &gpio1 {
 377         pinctrl-names = "default";
 378         pinctrl-0 = <&pinctrl_pmic_5v>;
 379
 380         pmic-5v-hog {
 381                 gpio-hog;
 382                 gpios = <1 GPIO_ACTIVE_HIGH>;
 383                 input;
 384                 line-name = "pmic-5v";
 385         };
 386 };
 387
 388 &iomuxc {
 389         pinctrl-names = "default";
 390         pinctrl-0 = <&pinctrl_hog>;
 391
 392         pinctrl_hog: hoggrp {
 393                 fsl,pins = <
 394                         /* CLKO2 for cameras on both CSI1 and CSI2 */
 395                         MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
 396                 >;
 397         };
 398
 399         pinctrl_audiopwr: audiopwrgrp {
 400                 fsl,pins = <
 401                         /* AUDIO_POWER_EN_3V3 */
 402                         MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4       0x83
 403                 >;
 404         };
 405
 406         pinctrl_bl: blgrp {
 407                 fsl,pins = <
 408                         /* BACKLINGE_EN */
 409                         MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14        0x83
 410                 >;
 411         };
 412
 413         pinctrl_bt: btgrp {
 414                 fsl,pins = <
 415                         /* BT_REG_ON */
 416                         MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25       0x83
 417                 >;
 418         };
 419
 420         pinctrl_camera_pwr: camerapwrgrp {
 421                 fsl,pins = <
 422                         /* CAMERA_PWR_EN_3V3 */
 423                         MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0       0x83
 424                 >;
 425         };
 426
 427         pinctrl_csi1: csi1grp {
 428                 fsl,pins = <
 429                         /* CSI1_NRST */
 430                         MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25        0x83
 431                 >;
 432         };
 433
 434         pinctrl_charger_in: chargeringrp {
 435                 fsl,pins = <
 436                         /* CHRG_INT */
 437                         MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3       0x80
 438                 >;
 439         };
 440
 441         pinctrl_dsibiasen: dsibiasengrp {
 442                 fsl,pins = <
 443                         /* DSI_BIAS_EN */
 444                         MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20        0x83
 445                 >;
 446         };
 447
 448         pinctrl_dsien: dsiengrp {
 449                 fsl,pins = <
 450                         /* DSI_EN_3V3 */
 451                         MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x83
 452                 >;
 453         };
 454
 455         pinctrl_dsirst: dsirstgrp {
 456                 fsl,pins = <
 457                         /* DSI_RST */
 458                         MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29        0x83
 459                         /* DSI_TE */
 460                         MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28        0x83
 461                         /* TP_RST */
 462                         MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24     0x83
 463                 >;
 464         };
 465
 466         pinctrl_ecspi1: ecspigrp {
 467                 fsl,pins = <
 468                         MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI    0x83
 469                         MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO    0x83
 470                         MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9       0x19
 471                         MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK    0x83
 472                 >;
 473         };
 474
 475         pinctrl_gauge: gaugegrp {
 476                 fsl,pins = <
 477                         /* BAT_LOW */
 478                         MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20        0x80
 479                 >;
 480         };
 481
 482         pinctrl_gnsspwr: gnsspwrgrp {
 483                 fsl,pins = <
 484                         /* GPS3V3_EN */
 485                         MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12     0x83
 486                 >;
 487         };
 488
 489         pinctrl_haptic: hapticgrp {
 490                 fsl,pins = <
 491                         /* MOTO */
 492                         MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT     0x83
 493                 >;
 494         };
 495
 496         pinctrl_hp: hpgrp {
 497                 fsl,pins = <
 498                         /* HEADPHONE_DET_1V8 */
 499                         MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9      0x180
 500                 >;
 501         };
 502
 503         pinctrl_hub_pwr: hubpwrgrp {
 504                 fsl,pins = <
 505                         /* HUB_PWR_3V3_EN */
 506                         MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14      0x83
 507                 >;
 508         };
 509
 510         pinctrl_i2c1: i2c1grp {
 511                 fsl,pins = <
 512                         MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL          0x40000026
 513                         MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA          0x40000026
 514                 >;
 515         };
 516
 517         pinctrl_i2c2: i2c2grp {
 518                 fsl,pins = <
 519                         MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL          0x40000026
 520                         MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA          0x40000026
 521                 >;
 522         };
 523
 524         pinctrl_i2c3: i2c3grp {
 525                 fsl,pins = <
 526                         MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL          0x40000026
 527                         MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA          0x40000026
 528                 >;
 529         };
 530
 531         pinctrl_i2c4: i2c4grp {
 532                 fsl,pins = <
 533                         MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL          0x40000026
 534                         MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA          0x40000026
 535                 >;
 536         };
 537
 538         pinctrl_keys: keysgrp {
 539                 fsl,pins = <
 540                         /* VOL- */
 541                         MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17       0x01C0
 542                         /* VOL+ */
 543                         MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16        0x01C0
 544                 >;
 545         };
 546
 547         pinctrl_led_b: ledbgrp {
 548                 fsl,pins = <
 549                         /* LED_B */
 550                         MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT        0x06
 551                 >;
 552         };
 553
 554         pinctrl_led_g: ledggrp {
 555                 fsl,pins = <
 556                         /* LED_G */
 557                         MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT         0x06
 558                 >;
 559         };
 560
 561         pinctrl_led_r: ledrgrp {
 562                 fsl,pins = <
 563                         /* LED_R */
 564                         MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT          0x06
 565                 >;
 566         };
 567
 568         pinctrl_mag: maggrp {
 569                 fsl,pins = <
 570                         /* INT_MAG */
 571                         MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22       0x80
 572                 >;
 573         };
 574
 575         pinctrl_pmic: pmicgrp {
 576                 fsl,pins = <
 577                         /* PMIC_NINT */
 578                         MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7       0x80
 579                 >;
 580         };
 581
 582         pinctrl_pmic_5v: pmic5vgrp {
 583                 fsl,pins = <
 584                         /* PMIC_5V */
 585                         MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1       0x80
 586                 >;
 587         };
 588
 589         pinctrl_prox: proxgrp {
 590                 fsl,pins = <
 591                         /* INT_LIGHT */
 592                         MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7      0x80
 593                 >;
 594         };
 595
 596         pinctrl_rtc: rtcgrp {
 597                 fsl,pins = <
 598                         /* RTC_INT */
 599                         MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9       0x80
 600                 >;
 601         };
 602
 603         pinctrl_sai2: sai2grp {
 604                 fsl,pins = <
 605                         MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
 606                         MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
 607                         MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK        0xd6
 608                         MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
 609                         MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
 610                 >;
 611         };
 612
 613         pinctrl_sai6: sai6grp {
 614                 fsl,pins = <
 615                         MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0    0xd6
 616                         MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC     0xd6
 617                         MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK     0xd6
 618                         MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0    0xd6
 619                 >;
 620         };
 621
 622         pinctrl_tcpc: tcpcgrp {
 623                 fsl,pins = <
 624                         /* TCPC_INT */
 625                         MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10      0x01C0
 626                 >;
 627         };
 628
 629         pinctrl_touch: touchgrp {
 630                 fsl,pins = <
 631                         /* TP_INT */
 632                         MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27        0x80
 633                 >;
 634         };
 635
 636         pinctrl_typec: typecgrp {
 637                 fsl,pins = <
 638                         /* TYPEC_MUX_EN */
 639                         MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11      0x83
 640                 >;
 641         };
 642
 643         pinctrl_uart1: uart1grp {
 644                 fsl,pins = <
 645                         MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX     0x49
 646                         MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX     0x49
 647                 >;
 648         };
 649
 650         pinctrl_uart2: uart2grp {
 651                 fsl,pins = <
 652                         MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX     0x49
 653                         MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX     0x49
 654                 >;
 655         };
 656
 657         pinctrl_uart3: uart3grp {
 658                 fsl,pins = <
 659                         MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX     0x49
 660                         MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX     0x49
 661                 >;
 662         };
 663
 664         pinctrl_uart4: uart4grp {
 665                 fsl,pins = <
 666                         MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX           0x49
 667                         MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX           0x49
 668                         MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B        0x49
 669                         MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B         0x49
 670                 >;
 671         };
 672
 673         pinctrl_usdhc1: usdhc1grp {
 674                 fsl,pins = <
 675                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x83
 676                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xc3
 677                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xc3
 678                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xc3
 679                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xc3
 680                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xc3
 681                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xc3
 682                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xc3
 683                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xc3
 684                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xc3
 685                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x83
 686                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 687                 >;
 688         };
 689
 690         pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 691                 fsl,pins = <
 692                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x8d
 693                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xcd
 694                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xcd
 695                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xcd
 696                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xcd
 697                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xcd
 698                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xcd
 699                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xcd
 700                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xcd
 701                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xcd
 702                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x8d
 703                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 704                 >;
 705         };
 706
 707         pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 708                 fsl,pins = <
 709                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x9f
 710                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xdf
 711                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xdf
 712                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xdf
 713                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xdf
 714                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xdf
 715                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xdf
 716                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xdf
 717                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xdf
 718                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xdf
 719                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x9f
 720                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 721                 >;
 722         };
 723
 724         pinctrl_usdhc2: usdhc2grp {
 725                 fsl,pins = <
 726                         MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12        0x80
 727                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x83
 728                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xc3
 729                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xc3
 730                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xc3
 731                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xc3
 732                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xc3
 733                         MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
 734                 >;
 735         };
 736
 737         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 738                 fsl,pins = <
 739                         MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12        0x80
 740                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x8d
 741                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xcd
 742                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xcd
 743                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xcd
 744                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xcd
 745                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xcd
 746                         MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
 747                 >;
 748         };
 749
 750         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 751                 fsl,pins = <
 752                         MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12        0x80
 753                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x9f
 754                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xcf
 755                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xcf
 756                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xcf
 757                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xcf
 758                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xcf
 759                         MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
 760                 >;
 761         };
 762
 763         pinctrl_wifi_disable: wifidisablegrp {
 764                 fsl,pins = <
 765                         /* WIFI_REG_ON */
 766                         MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29        0x83
 767                 >;
 768         };
 769
 770         pinctrl_wifi_pwr: wifipwrgrp {
 771                 fsl,pins = <
 772                         /* WIFI3V3_EN */
 773                         MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10     0x83
 774                 >;
 775         };
 776
 777         pinctrl_wdog: wdoggrp {
 778                 fsl,pins = <
 779                         /* nWDOG */
 780                         MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0x1f
 781                 >;
 782         };
 783 };
 784
 785 &i2c1 {
 786         clock-frequency = <384000>;
 787         pinctrl-names = "default";
 788         pinctrl-0 = <&pinctrl_i2c1>;
 789         status = "okay";
 790
 791         typec_pd: usb-pd@3f {
 792                 compatible = "ti,tps6598x";
 793                 reg = <0x3f>;
 794                 pinctrl-names = "default";
 795                 pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>;
 796                 interrupt-parent = <&gpio1>;
 797                 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 798                 interrupt-names = "irq";
 799                 extcon = <&usb3_phy0>;
 800                 wakeup-source;
 801
 802                 connector {
 803                         compatible = "usb-c-connector";
 804                         label = "USB-C";
 805                         data-role = "dual";
 806
 807                         ports {
 808                                 #address-cells = <1>;
 809                                 #size-cells = <0>;
 810
 811                                 port@0 {
 812                                         reg = <0>;
 813
 814                                         usb_con_hs: endpoint {
 815                                                 remote-endpoint = <&typec_hs>;
 816                                         };
 817                                 };
 818
 819                                 port@1 {
 820                                         reg = <1>;
 821
 822                                         usb_con_ss: endpoint {
 823                                                 remote-endpoint = <&typec_ss>;
 824                                         };
 825                                 };
 826                         };
 827                 };
 828         };
 829
 830         pmic: pmic@4b {
 831                 compatible = "rohm,bd71837";
 832                 reg = <0x4b>;
 833                 pinctrl-names = "default";
 834                 pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>;
 835                 clocks = <&pmic_osc>;
 836                 #clock-cells = <0>;
 837                 clock-names = "osc";
 838                 clock-output-names = "pmic_clk";
 839                 interrupt-parent = <&gpio1>;
 840                 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 841                 rohm,reset-snvs-powered;
 842
 843                 regulators {
 844                         buck1_reg: BUCK1 {
 845                                 regulator-name = "buck1";
 846                                 regulator-min-microvolt = <700000>;
 847                                 regulator-max-microvolt = <1300000>;
 848                                 regulator-boot-on;
 849                                 regulator-ramp-delay = <1250>;
 850                                 rohm,dvs-run-voltage = <880000>;
 851                                 rohm,dvs-idle-voltage = <820000>;
 852                                 rohm,dvs-suspend-voltage = <810000>;
 853                                 regulator-always-on;
 854                         };
 855
 856                         buck2_reg: BUCK2 {
 857                                 regulator-name = "buck2";
 858                                 regulator-min-microvolt = <700000>;
 859                                 regulator-max-microvolt = <1300000>;
 860                                 regulator-boot-on;
 861                                 regulator-ramp-delay = <1250>;
 862                                 rohm,dvs-run-voltage = <950000>;
 863                                 rohm,dvs-idle-voltage = <850000>;
 864                                 regulator-always-on;
 865                         };
 866
 867                         buck3_reg: BUCK3 {
 868                                 regulator-name = "buck3";
 869                                 regulator-min-microvolt = <700000>;
 870                                 regulator-max-microvolt = <1300000>;
 871                                 regulator-boot-on;
 872                                 rohm,dvs-run-voltage = <850000>;
 873                         };
 874
 875                         buck4_reg: BUCK4 {
 876                                 regulator-name = "buck4";
 877                                 regulator-min-microvolt = <700000>;
 878                                 regulator-max-microvolt = <1300000>;
 879                                 rohm,dvs-run-voltage = <930000>;
 880                         };
 881
 882                         buck5_reg: BUCK5 {
 883                                 regulator-name = "buck5";
 884                                 regulator-min-microvolt = <700000>;
 885                                 regulator-max-microvolt = <1350000>;
 886                                 regulator-boot-on;
 887                                 regulator-always-on;
 888                         };
 889
 890                         buck6_reg: BUCK6 {
 891                                 regulator-name = "buck6";
 892                                 regulator-min-microvolt = <3000000>;
 893                                 regulator-max-microvolt = <3300000>;
 894                                 regulator-boot-on;
 895                                 regulator-always-on;
 896                         };
 897
 898                         buck7_reg: BUCK7 {
 899                                 regulator-name = "buck7";
 900                                 regulator-min-microvolt = <1605000>;
 901                                 regulator-max-microvolt = <1995000>;
 902                                 regulator-boot-on;
 903                                 regulator-always-on;
 904                         };
 905
 906                         buck8_reg: BUCK8 {
 907                                 regulator-name = "buck8";
 908                                 regulator-min-microvolt = <800000>;
 909                                 regulator-max-microvolt = <1400000>;
 910                                 regulator-boot-on;
 911                                 regulator-always-on;
 912                         };
 913
 914                         ldo1_reg: LDO1 {
 915                                 regulator-name = "ldo1";
 916                                 regulator-min-microvolt = <3000000>;
 917                                 regulator-max-microvolt = <3300000>;
 918                                 regulator-boot-on;
 919                                 /* leave on for snvs power button */
 920                                 regulator-always-on;
 921                         };
 922
 923                         ldo2_reg: LDO2 {
 924                                 regulator-name = "ldo2";
 925                                 regulator-min-microvolt = <900000>;
 926                                 regulator-max-microvolt = <900000>;
 927                                 regulator-boot-on;
 928                                 /* leave on for snvs power button */
 929                                 regulator-always-on;
 930                         };
 931
 932                         ldo3_reg: LDO3 {
 933                                 regulator-name = "ldo3";
 934                                 regulator-min-microvolt = <1800000>;
 935                                 regulator-max-microvolt = <3300000>;
 936                                 regulator-boot-on;
 937                                 regulator-always-on;
 938                         };
 939
 940                         ldo4_reg: LDO4 {
 941                                 regulator-name = "ldo4";
 942                                 regulator-min-microvolt = <900000>;
 943                                 regulator-max-microvolt = <1800000>;
 944                                 regulator-boot-on;
 945                                 regulator-always-on;
 946                         };
 947
 948                         ldo5_reg: LDO5 {
 949                                 /* VDD_PHY_0V9 - MIPI and HDMI domains */
 950                                 regulator-name = "ldo5";
 951                                 regulator-min-microvolt = <1800000>;
 952                                 regulator-max-microvolt = <3300000>;
 953                                 regulator-always-on;
 954                         };
 955
 956                         ldo6_reg: LDO6 {
 957                                 /* VDD_PHY_0V9 - MIPI, HDMI and USB domains */
 958                                 regulator-name = "ldo6";
 959                                 regulator-min-microvolt = <900000>;
 960                                 regulator-max-microvolt = <1800000>;
 961                                 regulator-boot-on;
 962                                 regulator-always-on;
 963                         };
 964
 965                         ldo7_reg: LDO7 {
 966                                 /* VDD_PHY_3V3 - USB domain */
 967                                 regulator-name = "ldo7";
 968                                 regulator-min-microvolt = <1800000>;
 969                                 regulator-max-microvolt = <3300000>;
 970                                 regulator-boot-on;
 971                                 regulator-always-on;
 972                         };
 973                 };
 974         };
 975
 976         rtc@68 {
 977                 compatible = "microcrystal,rv4162";
 978                 reg = <0x68>;
 979                 pinctrl-names = "default";
 980                 pinctrl-0 = <&pinctrl_rtc>;
 981                 interrupt-parent = <&gpio1>;
 982                 interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 983         };
 984 };
 985
 986 &i2c2 {
 987         clock-frequency = <384000>;
 988         pinctrl-names = "default";
 989         pinctrl-0 = <&pinctrl_i2c2>;
 990         status = "okay";
 991
 992         magnetometer: magnetometer@1e   {
 993                 compatible = "st,lsm9ds1-magn";
 994                 reg = <0x1e>;
 995                 pinctrl-names = "default";
 996                 pinctrl-0 = <&pinctrl_mag>;
 997                 interrupt-parent = <&gpio3>;
 998                 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
 999                 vdd-supply = <&reg_vdd_sen>;
1000                 vddio-supply = <&reg_vdd_1v8>;
1001         };
1002
1003         regulator@3e {
1004                 compatible = "ti,tps65132";
1005                 reg = <0x3e>;
1006
1007                 reg_lcd_avdd: outp {
1008                         regulator-name = "LCD_AVDD";
1009                         vin-supply = <&reg_lcd_3v4>;
1010                 };
1011
1012                 reg_lcd_avee: outn {
1013                         regulator-name = "LCD_AVEE";
1014                         vin-supply = <&reg_lcd_3v4>;
1015                 };
1016         };
1017
1018         proximity: prox@60 {
1019                 compatible = "vishay,vcnl4040";
1020                 reg = <0x60>;
1021                 pinctrl-names = "default";
1022                 pinctrl-0 = <&pinctrl_prox>;
1023                 interrupt-parent = <&gpio3>;
1024                 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
1025         };
1026
1027         accel_gyro: accel-gyro@6a       {
1028                 compatible = "st,lsm9ds1-imu";
1029                 reg = <0x6a>;
1030                 vdd-supply = <&reg_vdd_sen>;
1031                 vddio-supply = <&reg_vdd_1v8>;
1032         };
1033 };
1034
1035 &i2c3 {
1036         clock-frequency = <384000>;
1037         pinctrl-names = "default";
1038         pinctrl-0 = <&pinctrl_i2c3>;
1039         status = "okay";
1040
1041         codec: audio-codec@1a {
1042                 compatible = "wlf,wm8962";
1043                 reg = <0x1a>;
1044                 clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
1045                 assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
1046                 assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
1047                 assigned-clock-rates = <24576000>;
1048                 #sound-dai-cells = <0>;
1049                 mic-cfg = <0x200>;
1050                 DCVDD-supply = <&reg_aud_1v8>;
1051                 DBVDD-supply = <&reg_aud_1v8>;
1052                 AVDD-supply = <&reg_aud_1v8>;
1053                 CPVDD-supply = <&reg_aud_1v8>;
1054                 MICVDD-supply = <&reg_mic_2v4>;
1055                 PLLVDD-supply = <&reg_aud_1v8>;
1056                 SPKVDD1-supply = <&reg_vsys_3v4>;
1057                 SPKVDD2-supply = <&reg_vsys_3v4>;
1058                 gpio-cfg = <
1059                         0x0000 /* n/c */
1060                         0x0001 /* gpio2, 1: default */
1061                         0x0013 /* gpio3, 2: dmicclk */
1062                         0x0000 /* n/c, 3: default */
1063                         0x8014 /* gpio5, 4: dmic_dat */
1064                         0x0000 /* gpio6, 5: default */
1065                 >;
1066         };
1067
1068         camera_front: camera@20 {
1069                 compatible = "hynix,hi846";
1070                 reg = <0x20>;
1071                 pinctrl-names = "default";
1072                 pinctrl-0 = <&pinctrl_csi1>;
1073                 clocks = <&clk IMX8MQ_CLK_CLKO2>;
1074                 assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>;
1075                 assigned-clock-rates = <25000000>;
1076                 reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
1077                 vdda-supply = <&reg_vcam_2v8>;
1078                 vddd-supply = <&reg_vcam_1v2>;
1079                 vddio-supply = <&reg_csi_1v8>;
1080                 rotation = <90>;
1081                 orientation = <0>;
1082
1083                 port {
1084                         camera1_ep: endpoint {
1085                                 data-lanes = <1 2>;
1086                                 link-frequencies = /bits/ 64
1087                                         <80000000 200000000 300000000>;
1088                                 remote-endpoint = <&mipi1_sensor_ep>;
1089                         };
1090                 };
1091         };
1092
1093         backlight@36 {
1094                 compatible = "ti,lm36922";
1095                 reg = <0x36>;
1096                 pinctrl-names = "default";
1097                 pinctrl-0 = <&pinctrl_bl>;
1098                 #address-cells = <1>;
1099                 #size-cells = <0>;
1100                 enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
1101                 vled-supply = <&reg_vsys_3v4>;
1102                 ti,ovp-microvolt = <25000000>;
1103
1104                 led_backlight: led@0 {
1105                         reg = <0>;
1106                         label = ":backlight";
1107                         linux,default-trigger = "backlight";
1108                         led-max-microamp = <20000>;
1109                 };
1110         };
1111
1112         touchscreen@38 {
1113                 compatible = "edt,edt-ft5506";
1114                 reg = <0x38>;
1115                 pinctrl-names = "default";
1116                 pinctrl-0 = <&pinctrl_touch>;
1117                 interrupt-parent = <&gpio1>;
1118                 interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
1119                 touchscreen-size-x = <720>;
1120                 touchscreen-size-y = <1440>;
1121                 vcc-supply = <&reg_lcd_1v8>;
1122         };
1123 };
1124
1125 &i2c4 {
1126         clock-frequency = <384000>;
1127         pinctrl-names = "default";
1128         pinctrl-0 = <&pinctrl_i2c4>;
1129         status = "okay";
1130
1131         vcm@c {
1132                 compatible = "dongwoon,dw9714";
1133                 reg = <0x0c>;
1134                 vcc-supply = <&reg_csi_1v8>;
1135         };
1136
1137         bat: fuel-gauge@36 {
1138                 compatible = "maxim,max17055";
1139                 reg = <0x36>;
1140                 interrupt-parent = <&gpio3>;
1141                 interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
1142                 pinctrl-names = "default";
1143                 pinctrl-0 = <&pinctrl_gauge>;
1144                 power-supplies = <&bq25895>;
1145                 maxim,over-heat-temp = <700>;
1146                 maxim,over-volt = <4500>;
1147                 maxim,rsns-microohm = <5000>;
1148         };
1149
1150         bq25895: charger@6a {
1151                 compatible = "ti,bq25895", "ti,bq25890";
1152                 reg = <0x6a>;
1153                 pinctrl-names = "default";
1154                 pinctrl-0 = <&pinctrl_charger_in>;
1155                 interrupt-parent = <&gpio3>;
1156                 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
1157                 ti,battery-regulation-voltage = <4208000>; /* uV */
1158                 ti,termination-current = <128000>;  /* uA */
1159                 ti,precharge-current = <128000>; /* uA */
1160                 ti,minimum-sys-voltage = <3700000>; /* uV */
1161                 ti,boost-voltage = <5000000>; /* uV */
1162                 ti,boost-max-current = <1500000>; /* uA */
1163                 monitored-battery = <&bat>;
1164                 power-supplies = <&typec_pd>;
1165         };
1166 };
1167
1168 &lcdif {
1169         status = "okay";
1170 };
1171
1172 &mipi_csi1 {
1173         assigned-clock-rates = <266000000>, <200000000>, <66000000>;
1174         status = "okay";
1175
1176         ports {
1177                 port@0 {
1178                         reg = <0>;
1179
1180                         mipi1_sensor_ep: endpoint {
1181                                 remote-endpoint = <&camera1_ep>;
1182                                 data-lanes = <1 2>;
1183                         };
1184                 };
1185         };
1186 };
1187
1188 &mipi_dsi {
1189         #address-cells = <1>;
1190         #size-cells = <0>;
1191         status = "okay";
1192
1193         lcd_panel: panel@0 {
1194                 compatible = "mantix,mlaf057we51-x";
1195                 reg = <0>;
1196                 pinctrl-names = "default";
1197                 pinctrl-0 = <&pinctrl_dsirst>;
1198                 avdd-supply = <&reg_lcd_avdd>;
1199                 avee-supply = <&reg_lcd_avee>;
1200                 vddi-supply = <&reg_lcd_1v8>;
1201                 backlight = <&backlight_dsi>;
1202                 reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
1203                 mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
1204
1205                 port {
1206                         panel_in: endpoint {
1207                                 remote-endpoint = <&mipi_dsi_out>;
1208                         };
1209                 };
1210         };
1211
1212         ports {
1213                 port@1 {
1214                         reg = <1>;
1215
1216                         mipi_dsi_out: endpoint {
1217                                 remote-endpoint = <&panel_in>;
1218                         };
1219                 };
1220         };
1221 };
1222
1223 &pgc_gpu {
1224         power-supply = <&buck3_reg>;
1225 };
1226
1227 &pgc_mipi {
1228         power-supply = <&ldo5_reg>;
1229 };
1230
1231 &pgc_vpu {
1232         power-supply = <&buck4_reg>;
1233 };
1234
1235 &pwm1 {
1236         pinctrl-names = "default";
1237         pinctrl-0 = <&pinctrl_haptic>;
1238         status = "okay";
1239 };
1240
1241 &pwm2 {
1242         pinctrl-names = "default";
1243         pinctrl-0 = <&pinctrl_led_b>;
1244         status = "okay";
1245 };
1246
1247 &pwm3 {
1248         pinctrl-names = "default";
1249         pinctrl-0 = <&pinctrl_led_r>;
1250         status = "okay";
1251 };
1252
1253 &pwm4 {
1254         pinctrl-names = "default";
1255         pinctrl-0 = <&pinctrl_led_g>;
1256         status = "okay";
1257 };
1258
1259 &sai2 {
1260         pinctrl-names = "default";
1261         pinctrl-0 = <&pinctrl_sai2>;
1262         assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
1263         assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
1264         assigned-clock-rates = <24576000>;
1265         status = "okay";
1266 };
1267
1268 &sai6 {
1269         pinctrl-names = "default";
1270         pinctrl-0 = <&pinctrl_sai6>;
1271         assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
1272         assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
1273         assigned-clock-rates = <24576000>;
1274         fsl,sai-synchronous-rx;
1275         status = "okay";
1276 };
1277
1278 &snvs_pwrkey {
1279         status = "okay";
1280 };
1281
1282 &snvs_rtc {
1283         status = "disabled";
1284 };
1285
1286 &uart1 { /* console */
1287         pinctrl-names = "default";
1288         pinctrl-0 = <&pinctrl_uart1>;
1289         status = "okay";
1290 };
1291
1292 &uart2 { /* TPS - GPS - DEBUG */
1293         pinctrl-names = "default";
1294         pinctrl-0 = <&pinctrl_uart2>;
1295         status = "okay";
1296
1297         gnss {
1298                 compatible = "globaltop,pa6h";
1299                 vcc-supply = <&reg_gnss>;
1300                 current-speed = <9600>;
1301         };
1302 };
1303
1304 &uart3 { /* SMC */
1305         pinctrl-names = "default";
1306         pinctrl-0 = <&pinctrl_uart3>;
1307         status = "okay";
1308 };
1309
1310 &uart4 { /* BT */
1311         pinctrl-names = "default";
1312         pinctrl-0 = <&pinctrl_uart4>;
1313         uart-has-rtscts;
1314         status = "okay";
1315 };
1316
1317 &usb3_phy0 {
1318         status = "okay";
1319 };
1320
1321 &usb3_phy1 {
1322         vbus-supply = <&reg_hub>;
1323         status = "okay";
1324 };
1325
1326 &usb_dwc3_0 {
1327         #address-cells = <1>;
1328         #size-cells = <0>;
1329         dr_mode = "otg";
1330         usb-role-switch;
1331         status = "okay";
1332
1333         port@0 {
1334                 reg = <0>;
1335
1336                 typec_hs: endpoint {
1337                         remote-endpoint = <&usb_con_hs>;
1338                 };
1339         };
1340
1341         port@1 {
1342                 reg = <1>;
1343
1344                 typec_ss: endpoint {
1345                         remote-endpoint = <&usb_con_ss>;
1346                 };
1347         };
1348 };
1349
1350 &usb_dwc3_1 {
1351         dr_mode = "host";
1352         status = "okay";
1353         #address-cells = <1>;
1354         #size-cells = <0>;
1355
1356         /* Microchip USB2642 */
1357         hub@1 {
1358                 compatible = "usb424,2640";
1359                 reg = <1>;
1360                 #address-cells = <1>;
1361                 #size-cells = <0>;
1362
1363                 mass-storage@1 {
1364                         compatible = "usb424,4041";
1365                         reg = <1>;
1366                 };
1367         };
1368 };
1369
1370 &usdhc1 {
1371         assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
1372         assigned-clock-rates = <400000000>;
1373         pinctrl-names = "default", "state_100mhz", "state_200mhz";
1374         pinctrl-0 = <&pinctrl_usdhc1>;
1375         pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
1376         pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
1377         bus-width = <8>;
1378         vmmc-supply = <&reg_vdd_3v3>;
1379         vqmmc-supply = <&reg_vdd_1v8>;
1380         non-removable;
1381         status = "okay";
1382 };
1383
1384 &usdhc2 {
1385         assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
1386         assigned-clock-rates = <200000000>;
1387         pinctrl-names = "default", "state_100mhz", "state_200mhz";
1388         pinctrl-0 = <&pinctrl_usdhc2>;
1389         pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
1390         pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
1391         bus-width = <4>;
1392         vmmc-supply = <&reg_wifi_3v3>;
1393         mmc-pwrseq = <&usdhc2_pwrseq>;
1394         post-power-on-delay-ms = <20>;
1395         cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
1396         max-frequency = <100000000>;
1397         disable-wp;
1398         cap-sdio-irq;
1399         keep-power-in-suspend;
1400         wakeup-source;
1401         status = "okay";
1402 };
1403
1404 &wdog1 {
1405         pinctrl-names = "default";
1406         pinctrl-0 = <&pinctrl_wdog>;
1407         fsl,ext-reset-output;
1408         status = "okay";
1409 };
1410
1411 &a53_opp_table {
1412         opp-1000000000 {
1413                 opp-microvolt = <850000>;
1414         };
1415
1416         opp-1500000000 {
1417                 opp-microvolt = <950000>;
1418         };
1419 };