arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2018-2020 Purism SPC
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "dt-bindings/input/input.h"
   9 #include <dt-bindings/interrupt-controller/irq.h>
  10 #include <dt-bindings/leds/common.h>
  11 #include "dt-bindings/pwm/pwm.h"
  12 #include "dt-bindings/usb/pd.h"
  13 #include "imx8mq.dtsi"
  14
  15 / {
  16         model = "Purism Librem 5";
  17         compatible = "purism,librem5", "fsl,imx8mq";
  18         chassis-type = "handset";
  19
  20         backlight_dsi: backlight-dsi {
  21                 compatible = "led-backlight";
  22                 leds = <&led_backlight>;
  23         };
  24
  25         pmic_osc: clock-pmic {
  26                 compatible = "fixed-clock";
  27                 #clock-cells = <0>;
  28                 clock-frequency = <32768>;
  29                 clock-output-names = "pmic_osc";
  30         };
  31
  32         chosen {
  33                 stdout-path = &uart1;
  34         };
  35
  36         gpio-keys {
  37                 compatible = "gpio-keys";
  38                 pinctrl-names = "default";
  39                 pinctrl-0 = <&pinctrl_keys>;
  40
  41                 key-vol-down {
  42                         label = "VOL_DOWN";
  43                         gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_VOLUMEDOWN>;
  45                         debounce-interval = <50>;
  46                         wakeup-source;
  47                 };
  48
  49                 key-vol-up {
  50                         label = "VOL_UP";
  51                         gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
  52                         linux,code = <KEY_VOLUMEUP>;
  53                         debounce-interval = <50>;
  54                         wakeup-source;
  55                 };
  56         };
  57
  58         led-controller {
  59                 compatible = "pwm-leds";
  60
  61                 led-0 {
  62                         function = LED_FUNCTION_STATUS;
  63                         color = <LED_COLOR_ID_BLUE>;
  64                         max-brightness = <248>;
  65                         pwms = <&pwm2 0 50000 0>;
  66                 };
  67
  68                 led-1 {
  69                         function = LED_FUNCTION_STATUS;
  70                         color = <LED_COLOR_ID_GREEN>;
  71                         max-brightness = <248>;
  72                         pwms = <&pwm4 0 50000 0>;
  73                 };
  74
  75                 led-2 {
  76                         function = LED_FUNCTION_STATUS;
  77                         color = <LED_COLOR_ID_RED>;
  78                         max-brightness = <248>;
  79                         pwms = <&pwm3 0 50000 0>;
  80                 };
  81         };
  82
  83         reg_aud_1v8: regulator-audio-1v8 {
  84                 compatible = "regulator-fixed";
  85                 pinctrl-names = "default";
  86                 pinctrl-0 = <&pinctrl_audiopwr>;
  87                 regulator-name = "AUDIO_PWR_EN";
  88                 regulator-min-microvolt = <1800000>;
  89                 regulator-max-microvolt = <1800000>;
  90                 gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
  91                 enable-active-high;
  92         };
  93
  94         /*
  95          * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC
  96          * since we can't have it twice in the 2 different regulator nodes.
  97          */
  98         reg_csi_1v8: regulator-csi-1v8 {
  99                 compatible = "regulator-fixed";
 100                 regulator-name = "CAMERA_VDDIO_1V8";
 101                 regulator-min-microvolt = <1800000>;
 102                 regulator-max-microvolt = <1800000>;
 103                 vin-supply = <&reg_vdd_3v3>;
 104                 gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 105                 enable-active-high;
 106         };
 107
 108         /* controlled by the CAMERA_POWER_KEY HKS */
 109         reg_vcam_1v2: regulator-vcam-1v2 {
 110                 compatible = "regulator-fixed";
 111                 regulator-name = "CAMERA_VDDD_1V2";
 112                 regulator-min-microvolt = <1200000>;
 113                 regulator-max-microvolt = <1200000>;
 114                 vin-supply = <&reg_vdd_1v8>;
 115                 enable-active-high;
 116         };
 117
 118         reg_vcam_2v8: regulator-vcam-2v8 {
 119                 compatible = "regulator-fixed";
 120                 regulator-name = "CAMERA_VDDA_2V8";
 121                 regulator-min-microvolt = <2800000>;
 122                 regulator-max-microvolt = <2800000>;
 123                 vin-supply = <&reg_vdd_3v3>;
 124                 gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 125                 enable-active-high;
 126         };
 127
 128         reg_gnss: regulator-gnss {
 129                 compatible = "regulator-fixed";
 130                 pinctrl-names = "default";
 131                 pinctrl-0 = <&pinctrl_gnsspwr>;
 132                 regulator-name = "GNSS";
 133                 regulator-min-microvolt = <3300000>;
 134                 regulator-max-microvolt = <3300000>;
 135                 gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 136                 enable-active-high;
 137         };
 138
 139         reg_hub: regulator-hub {
 140                 compatible = "regulator-fixed";
 141                 pinctrl-names = "default";
 142                 pinctrl-0 = <&pinctrl_hub_pwr>;
 143                 regulator-name = "HUB";
 144                 regulator-min-microvolt = <3300000>;
 145                 regulator-max-microvolt = <3300000>;
 146                 gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 147                 enable-active-high;
 148         };
 149
 150         reg_lcd_1v8: regulator-lcd-1v8 {
 151                 compatible = "regulator-fixed";
 152                 pinctrl-names = "default";
 153                 pinctrl-0 = <&pinctrl_dsien>;
 154                 regulator-name = "LCD_1V8";
 155                 regulator-min-microvolt = <1800000>;
 156                 regulator-max-microvolt = <1800000>;
 157                 vin-supply = <&reg_vdd_1v8>;
 158                 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 159                 enable-active-high;
 160                 /* Otherwise i2c3 is not functional */
 161                 regulator-always-on;
 162         };
 163
 164         reg_lcd_3v4: regulator-lcd-3v4 {
 165                 compatible = "regulator-fixed";
 166                 regulator-name = "LCD_3V4";
 167                 pinctrl-names = "default";
 168                 pinctrl-0 = <&pinctrl_dsibiasen>;
 169                 vin-supply = <&reg_vsys_3v4>;
 170                 gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 171                 enable-active-high;
 172         };
 173
 174         reg_vdd_sen: regulator-vdd-sen {
 175                 compatible = "regulator-fixed";
 176                 regulator-name = "VDD_SEN";
 177                 regulator-min-microvolt = <3300000>;
 178                 regulator-max-microvolt = <3300000>;
 179         };
 180
 181         reg_vdd_1v8: regulator-vdd-1v8 {
 182                 compatible = "regulator-fixed";
 183                 regulator-name = "VDD_1V8";
 184                 regulator-min-microvolt = <1800000>;
 185                 regulator-max-microvolt = <1800000>;
 186                 vin-supply = <&buck7_reg>;
 187         };
 188
 189         reg_vdd_3v3: regulator-vdd-3v3 {
 190                 compatible = "regulator-fixed";
 191                 regulator-name = "VDD_3V3";
 192                 regulator-min-microvolt = <3300000>;
 193                 regulator-max-microvolt = <3300000>;
 194         };
 195
 196         reg_vsys_3v4: regulator-vsys-3v4 {
 197                 compatible = "regulator-fixed";
 198                 regulator-name = "VSYS_3V4";
 199                 regulator-min-microvolt = <3400000>;
 200                 regulator-max-microvolt = <3400000>;
 201                 regulator-always-on;
 202         };
 203
 204         reg_wifi_3v3: regulator-wifi-3v3 {
 205                 compatible = "regulator-fixed";
 206                 pinctrl-names = "default";
 207                 pinctrl-0 = <&pinctrl_wifi_pwr>;
 208                 regulator-name = "3V3_WIFI";
 209                 regulator-min-microvolt = <3300000>;
 210                 regulator-max-microvolt = <3300000>;
 211                 gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>;
 212                 enable-active-high;
 213                 vin-supply = <&reg_vdd_3v3>;
 214         };
 215
 216         sound {
 217                 compatible = "simple-audio-card";
 218                 pinctrl-names = "default";
 219                 pinctrl-0 = <&pinctrl_hp>;
 220                 simple-audio-card,name = "Librem 5";
 221                 simple-audio-card,format = "i2s";
 222                 simple-audio-card,widgets =
 223                         "Headphone", "Headphones",
 224                         "Microphone", "Headset Mic",
 225                         "Microphone", "Digital Mic",
 226                         "Speaker", "Speaker";
 227                 simple-audio-card,routing =
 228                         "Headphones", "HPOUTL",
 229                         "Headphones", "HPOUTR",
 230                         "Speaker", "SPKOUTL",
 231                         "Speaker", "SPKOUTR",
 232                         "Headset Mic", "MICBIAS",
 233                         "IN3R", "Headset Mic",
 234                         "DMICDAT", "Digital Mic";
 235                 simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
 236
 237                 simple-audio-card,cpu {
 238                         sound-dai = <&sai2>;
 239                 };
 240
 241                 simple-audio-card,codec {
 242                         sound-dai = <&codec>;
 243                         clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 244                         frame-master;
 245                         bitclock-master;
 246                 };
 247         };
 248
 249         sound-wwan {
 250                 compatible = "simple-audio-card";
 251                 simple-audio-card,name = "Modem";
 252                 simple-audio-card,format = "i2s";
 253
 254                 simple-audio-card,cpu {
 255                         sound-dai = <&sai6>;
 256                         frame-inversion;
 257                 };
 258
 259                 simple-audio-card,codec {
 260                         sound-dai = <&bm818_codec>;
 261                         frame-master;
 262                         bitclock-master;
 263                 };
 264         };
 265
 266         usdhc2_pwrseq: pwrseq {
 267                 pinctrl-names = "default";
 268                 pinctrl-0 = <&pinctrl_bt>, <&pinctrl_wifi_disable>;
 269                 compatible = "mmc-pwrseq-simple";
 270                 reset-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>,
 271                               <&gpio4 29 GPIO_ACTIVE_HIGH>;
 272         };
 273
 274         bm818_codec: sound-wwan-codec {
 275                 compatible = "broadmobi,bm818", "option,gtm601";
 276                 #sound-dai-cells = <0>;
 277         };
 278
 279         vibrator {
 280                 compatible = "pwm-vibrator";
 281                 pwms = <&pwm1 0 1000000000 0>;
 282                 pwm-names = "enable";
 283                 vcc-supply = <&reg_vdd_3v3>;
 284         };
 285 };
 286
 287 &A53_0 {
 288         cpu-supply = <&buck2_reg>;
 289 };
 290
 291 &A53_1 {
 292         cpu-supply = <&buck2_reg>;
 293 };
 294
 295 &A53_2 {
 296         cpu-supply = <&buck2_reg>;
 297 };
 298
 299 &A53_3 {
 300         cpu-supply = <&buck2_reg>;
 301 };
 302
 303 &csi1 {
 304         status = "okay";
 305 };
 306
 307 &ddrc {
 308         operating-points-v2 = <&ddrc_opp_table>;
 309         status = "okay";
 310
 311         ddrc_opp_table: opp-table {
 312                 compatible = "operating-points-v2";
 313
 314                 opp-25M {
 315                         opp-hz = /bits/ 64 <25000000>;
 316                 };
 317
 318                 opp-100M {
 319                         opp-hz = /bits/ 64 <100000000>;
 320                 };
 321
 322                 opp-800M {
 323                         opp-hz = /bits/ 64 <800000000>;
 324                 };
 325         };
 326 };
 327
 328 &dphy {
 329         status = "okay";
 330 };
 331
 332 &ecspi1 {
 333         pinctrl-names = "default";
 334         pinctrl-0 = <&pinctrl_ecspi1>;
 335         cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 336         #address-cells = <1>;
 337         #size-cells = <0>;
 338         status = "okay";
 339
 340         nor_flash: flash@0 {
 341                 compatible = "jedec,spi-nor";
 342                 reg = <0>;
 343                 spi-max-frequency = <1000000>;
 344                 #address-cells = <1>;
 345                 #size-cells = <1>;
 346
 347                 partition@0 {
 348                         label = "protected0";
 349                         reg = <0x0 0x30000>;
 350                         read-only;
 351                 };
 352
 353                 partition@30000 {
 354                         label = "firmware";
 355                         reg = <0x30000 0x1d0000>;
 356                         read-only;
 357                 };
 358         };
 359 };
 360
 361 &gpio1 {
 362         pinctrl-names = "default";
 363         pinctrl-0 = <&pinctrl_pmic_5v>;
 364
 365         pmic-5v-hog {
 366                 gpio-hog;
 367                 gpios = <1 GPIO_ACTIVE_HIGH>;
 368                 input;
 369                 lane-mapping = "pmic-5v";
 370         };
 371 };
 372
 373 &iomuxc {
 374         pinctrl_audiopwr: audiopwrgrp {
 375                 fsl,pins = <
 376                         /* AUDIO_POWER_EN_3V3 */
 377                         MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4       0x83
 378                 >;
 379         };
 380
 381         pinctrl_bl: blgrp {
 382                 fsl,pins = <
 383                         /* BACKLINGE_EN */
 384                         MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14        0x83
 385                 >;
 386         };
 387
 388         pinctrl_bt: btgrp {
 389                 fsl,pins = <
 390                         /* BT_REG_ON */
 391                         MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25       0x83
 392                 >;
 393         };
 394
 395         pinctrl_camera_pwr: camerapwrgrp {
 396                 fsl,pins = <
 397                         /* CAMERA_PWR_EN_3V3 */
 398                         MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0       0x83
 399                 >;
 400         };
 401
 402         pinctrl_csi1: csi1grp {
 403                 fsl,pins = <
 404                         /* CSI1_NRST */
 405                         MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25        0x83
 406                 >;
 407         };
 408
 409         pinctrl_charger_in: chargeringrp {
 410                 fsl,pins = <
 411                         /* CHRG_INT */
 412                         MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3       0x80
 413                 >;
 414         };
 415
 416         pinctrl_dsibiasen: dsibiasengrp {
 417                 fsl,pins = <
 418                         /* DSI_BIAS_EN */
 419                         MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20        0x83
 420                 >;
 421         };
 422
 423         pinctrl_dsien: dsiengrp {
 424                 fsl,pins = <
 425                         /* DSI_EN_3V3 */
 426                         MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x83
 427                 >;
 428         };
 429
 430         pinctrl_dsirst: dsirstgrp {
 431                 fsl,pins = <
 432                         /* DSI_RST */
 433                         MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29        0x83
 434                         /* DSI_TE */
 435                         MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28        0x83
 436                         /* TP_RST */
 437                         MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24     0x83
 438                 >;
 439         };
 440
 441         pinctrl_ecspi1: ecspigrp {
 442                 fsl,pins = <
 443                         MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI    0x83
 444                         MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO    0x83
 445                         MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9       0x19
 446                         MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK    0x83
 447                 >;
 448         };
 449
 450         pinctrl_gauge: gaugegrp {
 451                 fsl,pins = <
 452                         /* BAT_LOW */
 453                         MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20        0x80
 454                 >;
 455         };
 456
 457         pinctrl_gnsspwr: gnsspwrgrp {
 458                 fsl,pins = <
 459                         /* GPS3V3_EN */
 460                         MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12     0x83
 461                 >;
 462         };
 463
 464         pinctrl_haptic: hapticgrp {
 465                 fsl,pins = <
 466                         /* MOTO */
 467                         MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT     0x83
 468                 >;
 469         };
 470
 471         pinctrl_hp: hpgrp {
 472                 fsl,pins = <
 473                         /* HEADPHONE_DET_1V8 */
 474                         MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9      0x180
 475                 >;
 476         };
 477
 478         pinctrl_hub_pwr: hubpwrgrp {
 479                 fsl,pins = <
 480                         /* HUB_PWR_3V3_EN */
 481                         MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14      0x83
 482                 >;
 483         };
 484
 485         pinctrl_i2c1: i2c1grp {
 486                 fsl,pins = <
 487                         MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL          0x40000026
 488                         MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA          0x40000026
 489                 >;
 490         };
 491
 492         pinctrl_i2c2: i2c2grp {
 493                 fsl,pins = <
 494                         MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL          0x40000026
 495                         MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA          0x40000026
 496                 >;
 497         };
 498
 499         pinctrl_i2c3: i2c3grp {
 500                 fsl,pins = <
 501                         MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL          0x40000026
 502                         MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA          0x40000026
 503                 >;
 504         };
 505
 506         pinctrl_i2c4: i2c4grp {
 507                 fsl,pins = <
 508                         MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL          0x40000026
 509                         MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA          0x40000026
 510                 >;
 511         };
 512
 513         pinctrl_keys: keysgrp {
 514                 fsl,pins = <
 515                         /* VOL- */
 516                         MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17       0x01C0
 517                         /* VOL+ */
 518                         MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16        0x01C0
 519                 >;
 520         };
 521
 522         pinctrl_led_b: ledbgrp {
 523                 fsl,pins = <
 524                         /* LED_B */
 525                         MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT        0x06
 526                 >;
 527         };
 528
 529         pinctrl_led_g: ledggrp {
 530                 fsl,pins = <
 531                         /* LED_G */
 532                         MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT         0x06
 533                 >;
 534         };
 535
 536         pinctrl_led_r: ledrgrp {
 537                 fsl,pins = <
 538                         /* LED_R */
 539                         MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT          0x06
 540                 >;
 541         };
 542
 543         pinctrl_mag: maggrp {
 544                 fsl,pins = <
 545                         /* INT_MAG */
 546                         MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22       0x80
 547                 >;
 548         };
 549
 550         pinctrl_pmic: pmicgrp {
 551                 fsl,pins = <
 552                         /* PMIC_NINT */
 553                         MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7       0x80
 554                 >;
 555         };
 556
 557         pinctrl_pmic_5v: pmic5vgrp {
 558                 fsl,pins = <
 559                         /* PMIC_5V */
 560                         MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1       0x80
 561                 >;
 562         };
 563
 564         pinctrl_prox: proxgrp {
 565                 fsl,pins = <
 566                         /* INT_LIGHT */
 567                         MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7      0x80
 568                 >;
 569         };
 570
 571         pinctrl_rtc: rtcgrp {
 572                 fsl,pins = <
 573                         /* RTC_INT */
 574                         MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9       0x80
 575                 >;
 576         };
 577
 578         pinctrl_sai2: sai2grp {
 579                 fsl,pins = <
 580                         MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
 581                         MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
 582                         MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK        0xd6
 583                         MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
 584                         MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
 585                 >;
 586         };
 587
 588         pinctrl_sai6: sai6grp {
 589                 fsl,pins = <
 590                         MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0    0xd6
 591                         MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC     0xd6
 592                         MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK     0xd6
 593                         MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0    0xd6
 594                 >;
 595         };
 596
 597         pinctrl_tcpc: tcpcgrp {
 598                 fsl,pins = <
 599                         /* TCPC_INT */
 600                         MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10      0x01C0
 601                 >;
 602         };
 603
 604         pinctrl_touch: touchgrp {
 605                 fsl,pins = <
 606                         /* TP_INT */
 607                         MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27        0x80
 608                 >;
 609         };
 610
 611         pinctrl_typec: typecgrp {
 612                 fsl,pins = <
 613                         /* TYPEC_MUX_EN */
 614                         MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11      0x83
 615                 >;
 616         };
 617
 618         pinctrl_uart1: uart1grp {
 619                 fsl,pins = <
 620                         MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX     0x49
 621                         MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX     0x49
 622                 >;
 623         };
 624
 625         pinctrl_uart2: uart2grp {
 626                 fsl,pins = <
 627                         MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX     0x49
 628                         MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX     0x49
 629                 >;
 630         };
 631
 632         pinctrl_uart3: uart3grp {
 633                 fsl,pins = <
 634                         MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX     0x49
 635                         MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX     0x49
 636                 >;
 637         };
 638
 639         pinctrl_uart4: uart4grp {
 640                 fsl,pins = <
 641                         MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX           0x49
 642                         MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX           0x49
 643                         MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B        0x49
 644                         MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B         0x49
 645                 >;
 646         };
 647
 648         pinctrl_usdhc1: usdhc1grp {
 649                 fsl,pins = <
 650                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x83
 651                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xc3
 652                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xc3
 653                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xc3
 654                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xc3
 655                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xc3
 656                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xc3
 657                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xc3
 658                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xc3
 659                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xc3
 660                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x83
 661                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 662                 >;
 663         };
 664
 665         pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
 666                 fsl,pins = <
 667                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x8d
 668                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xcd
 669                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xcd
 670                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xcd
 671                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xcd
 672                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xcd
 673                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xcd
 674                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xcd
 675                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xcd
 676                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xcd
 677                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x8d
 678                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 679                 >;
 680         };
 681
 682         pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
 683                 fsl,pins = <
 684                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x9f
 685                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xdf
 686                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xdf
 687                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xdf
 688                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xdf
 689                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xdf
 690                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xdf
 691                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xdf
 692                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xdf
 693                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xdf
 694                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x9f
 695                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 696                 >;
 697         };
 698
 699         pinctrl_usdhc2: usdhc2grp {
 700                 fsl,pins = <
 701                         MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12        0x80
 702                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x83
 703                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xc3
 704                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xc3
 705                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xc3
 706                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xc3
 707                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xc3
 708                         MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
 709                 >;
 710         };
 711
 712         pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
 713                 fsl,pins = <
 714                         MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12        0x80
 715                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x8d
 716                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xcd
 717                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xcd
 718                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xcd
 719                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xcd
 720                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xcd
 721                         MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
 722                 >;
 723         };
 724
 725         pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
 726                 fsl,pins = <
 727                         MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12        0x80
 728                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x9f
 729                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xcf
 730                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xcf
 731                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xcf
 732                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xcf
 733                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xcf
 734                         MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
 735                 >;
 736         };
 737
 738         pinctrl_wifi_disable: wifidisablegrp {
 739                 fsl,pins = <
 740                         /* WIFI_REG_ON */
 741                         MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29        0x83
 742                 >;
 743         };
 744
 745         pinctrl_wifi_pwr: wifipwrgrp {
 746                 fsl,pins = <
 747                         /* WIFI3V3_EN */
 748                         MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10     0x83
 749                 >;
 750         };
 751
 752         pinctrl_wdog: wdoggrp {
 753                 fsl,pins = <
 754                         /* nWDOG */
 755                         MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0x1f
 756                 >;
 757         };
 758 };
 759
 760 &i2c1 {
 761         clock-frequency = <387000>;
 762         pinctrl-names = "default";
 763         pinctrl-0 = <&pinctrl_i2c1>;
 764         status = "okay";
 765
 766         typec_pd: usb-pd@3f {
 767                 compatible = "ti,tps6598x";
 768                 reg = <0x3f>;
 769                 pinctrl-names = "default";
 770                 pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>;
 771                 interrupt-parent = <&gpio1>;
 772                 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 773                 interrupt-names = "irq";
 774
 775                 connector {
 776                         compatible = "usb-c-connector";
 777                         label = "USB-C";
 778                         data-role = "dual";
 779
 780                         ports {
 781                                 #address-cells = <1>;
 782                                 #size-cells = <0>;
 783
 784                                 port@0 {
 785                                         reg = <0>;
 786
 787                                         usb_con_hs: endpoint {
 788                                                 remote-endpoint = <&typec_hs>;
 789                                         };
 790                                 };
 791
 792                                 port@1 {
 793                                         reg = <1>;
 794
 795                                         usb_con_ss: endpoint {
 796                                                 remote-endpoint = <&typec_ss>;
 797                                         };
 798                                 };
 799                         };
 800                 };
 801         };
 802
 803         pmic: pmic@4b {
 804                 compatible = "rohm,bd71837";
 805                 reg = <0x4b>;
 806                 pinctrl-names = "default";
 807                 pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>;
 808                 clocks = <&pmic_osc>;
 809                 clock-names = "osc";
 810                 clock-output-names = "pmic_clk";
 811                 interrupt-parent = <&gpio1>;
 812                 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 813                 rohm,reset-snvs-powered;
 814
 815                 regulators {
 816                         buck1_reg: BUCK1 {
 817                                 regulator-name = "buck1";
 818                                 regulator-min-microvolt = <700000>;
 819                                 regulator-max-microvolt = <1300000>;
 820                                 regulator-boot-on;
 821                                 regulator-ramp-delay = <1250>;
 822                                 rohm,dvs-run-voltage = <900000>;
 823                                 rohm,dvs-idle-voltage = <850000>;
 824                                 rohm,dvs-suspend-voltage = <800000>;
 825                                 regulator-always-on;
 826                         };
 827
 828                         buck2_reg: BUCK2 {
 829                                 regulator-name = "buck2";
 830                                 regulator-min-microvolt = <700000>;
 831                                 regulator-max-microvolt = <1300000>;
 832                                 regulator-boot-on;
 833                                 regulator-ramp-delay = <1250>;
 834                                 rohm,dvs-run-voltage = <1000000>;
 835                                 rohm,dvs-idle-voltage = <900000>;
 836                                 regulator-always-on;
 837                         };
 838
 839                         buck3_reg: BUCK3 {
 840                                 regulator-name = "buck3";
 841                                 regulator-min-microvolt = <700000>;
 842                                 regulator-max-microvolt = <1300000>;
 843                                 regulator-boot-on;
 844                                 rohm,dvs-run-voltage = <900000>;
 845                         };
 846
 847                         buck4_reg: BUCK4 {
 848                                 regulator-name = "buck4";
 849                                 regulator-min-microvolt = <700000>;
 850                                 regulator-max-microvolt = <1300000>;
 851                                 rohm,dvs-run-voltage = <1000000>;
 852                         };
 853
 854                         buck5_reg: BUCK5 {
 855                                 regulator-name = "buck5";
 856                                 regulator-min-microvolt = <700000>;
 857                                 regulator-max-microvolt = <1350000>;
 858                                 regulator-boot-on;
 859                                 regulator-always-on;
 860                         };
 861
 862                         buck6_reg: BUCK6 {
 863                                 regulator-name = "buck6";
 864                                 regulator-min-microvolt = <3000000>;
 865                                 regulator-max-microvolt = <3300000>;
 866                                 regulator-boot-on;
 867                                 regulator-always-on;
 868                         };
 869
 870                         buck7_reg: BUCK7 {
 871                                 regulator-name = "buck7";
 872                                 regulator-min-microvolt = <1605000>;
 873                                 regulator-max-microvolt = <1995000>;
 874                                 regulator-boot-on;
 875                                 regulator-always-on;
 876                         };
 877
 878                         buck8_reg: BUCK8 {
 879                                 regulator-name = "buck8";
 880                                 regulator-min-microvolt = <800000>;
 881                                 regulator-max-microvolt = <1400000>;
 882                                 regulator-boot-on;
 883                                 regulator-always-on;
 884                         };
 885
 886                         ldo1_reg: LDO1 {
 887                                 regulator-name = "ldo1";
 888                                 regulator-min-microvolt = <3000000>;
 889                                 regulator-max-microvolt = <3300000>;
 890                                 regulator-boot-on;
 891                                 /* leave on for snvs power button */
 892                                 regulator-always-on;
 893                         };
 894
 895                         ldo2_reg: LDO2 {
 896                                 regulator-name = "ldo2";
 897                                 regulator-min-microvolt = <900000>;
 898                                 regulator-max-microvolt = <900000>;
 899                                 regulator-boot-on;
 900                                 /* leave on for snvs power button */
 901                                 regulator-always-on;
 902                         };
 903
 904                         ldo3_reg: LDO3 {
 905                                 regulator-name = "ldo3";
 906                                 regulator-min-microvolt = <1800000>;
 907                                 regulator-max-microvolt = <3300000>;
 908                                 regulator-boot-on;
 909                                 regulator-always-on;
 910                         };
 911
 912                         ldo4_reg: LDO4 {
 913                                 regulator-name = "ldo4";
 914                                 regulator-min-microvolt = <900000>;
 915                                 regulator-max-microvolt = <1800000>;
 916                                 regulator-boot-on;
 917                                 regulator-always-on;
 918                         };
 919
 920                         ldo5_reg: LDO5 {
 921                                 /* VDD_PHY_0V9 - MIPI and HDMI domains */
 922                                 regulator-name = "ldo5";
 923                                 regulator-min-microvolt = <1800000>;
 924                                 regulator-max-microvolt = <3300000>;
 925                                 regulator-always-on;
 926                         };
 927
 928                         ldo6_reg: LDO6 {
 929                                 /* VDD_PHY_0V9 - MIPI, HDMI and USB domains */
 930                                 regulator-name = "ldo6";
 931                                 regulator-min-microvolt = <900000>;
 932                                 regulator-max-microvolt = <1800000>;
 933                                 regulator-boot-on;
 934                                 regulator-always-on;
 935                         };
 936
 937                         ldo7_reg: LDO7 {
 938                                 /* VDD_PHY_3V3 - USB domain */
 939                                 regulator-name = "ldo7";
 940                                 regulator-min-microvolt = <1800000>;
 941                                 regulator-max-microvolt = <3300000>;
 942                                 regulator-boot-on;
 943                                 regulator-always-on;
 944                         };
 945                 };
 946         };
 947
 948         rtc@68 {
 949                 compatible = "microcrystal,rv4162";
 950                 reg = <0x68>;
 951                 pinctrl-names = "default";
 952                 pinctrl-0 = <&pinctrl_rtc>;
 953                 interrupt-parent = <&gpio1>;
 954                 interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 955         };
 956 };
 957
 958 &i2c2 {
 959         clock-frequency = <387000>;
 960         pinctrl-names = "default";
 961         pinctrl-0 = <&pinctrl_i2c2>;
 962         status = "okay";
 963
 964         magnetometer@1e {
 965                 compatible = "st,lsm9ds1-magn";
 966                 reg = <0x1e>;
 967                 pinctrl-names = "default";
 968                 pinctrl-0 = <&pinctrl_mag>;
 969                 interrupt-parent = <&gpio3>;
 970                 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
 971                 vdd-supply = <&reg_vdd_sen>;
 972                 vddio-supply = <&reg_vdd_1v8>;
 973         };
 974
 975         regulator@3e {
 976                 compatible = "tps65132";
 977                 reg = <0x3e>;
 978
 979                 reg_lcd_avdd: outp {
 980                         regulator-name = "LCD_AVDD";
 981                         vin-supply = <&reg_lcd_3v4>;
 982                 };
 983
 984                 reg_lcd_avee: outn {
 985                         regulator-name = "LCD_AVEE";
 986                         vin-supply = <&reg_lcd_3v4>;
 987                 };
 988         };
 989
 990         proximity: prox@60 {
 991                 compatible = "vishay,vcnl4040";
 992                 reg = <0x60>;
 993                 pinctrl-names = "default";
 994                 pinctrl-0 = <&pinctrl_prox>;
 995                 interrupt-parent = <&gpio3>;
 996                 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 997         };
 998
 999         accel_gyro: accel-gyro@6a       {
1000                 compatible = "st,lsm9ds1-imu";
1001                 reg = <0x6a>;
1002                 vdd-supply = <&reg_vdd_sen>;
1003                 vddio-supply = <&reg_vdd_1v8>;
1004         };
1005 };
1006
1007 &i2c3 {
1008         clock-frequency = <387000>;
1009         pinctrl-names = "default";
1010         pinctrl-0 = <&pinctrl_i2c3>;
1011         status = "okay";
1012
1013         codec: audio-codec@1a {
1014                 compatible = "wlf,wm8962";
1015                 reg = <0x1a>;
1016                 clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
1017                 assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
1018                 assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
1019                 assigned-clock-rates = <24576000>;
1020                 #sound-dai-cells = <0>;
1021                 mic-cfg = <0x200>;
1022                 DCVDD-supply = <&reg_aud_1v8>;
1023                 DBVDD-supply = <&reg_aud_1v8>;
1024                 AVDD-supply = <&reg_aud_1v8>;
1025                 CPVDD-supply = <&reg_aud_1v8>;
1026                 MICVDD-supply = <&reg_aud_1v8>;
1027                 PLLVDD-supply = <&reg_aud_1v8>;
1028                 SPKVDD1-supply = <&reg_vsys_3v4>;
1029                 SPKVDD2-supply = <&reg_vsys_3v4>;
1030                 gpio-cfg = <
1031                         0x0000 /* n/c */
1032                         0x0001 /* gpio2, 1: default */
1033                         0x0013 /* gpio3, 2: dmicclk */
1034                         0x0000 /* n/c, 3: default */
1035                         0x8014 /* gpio5, 4: dmic_dat */
1036                         0x0000 /* gpio6, 5: default */
1037                 >;
1038         };
1039
1040         camera_front: camera@20 {
1041                 compatible = "hynix,hi846";
1042                 reg = <0x20>;
1043                 pinctrl-names = "default";
1044                 pinctrl-0 = <&pinctrl_csi1>;
1045                 clocks = <&clk IMX8MQ_CLK_CLKO2>;
1046                 assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>;
1047                 assigned-clock-rates = <25000000>;
1048                 reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
1049                 vdda-supply = <&reg_vcam_2v8>;
1050                 vddd-supply = <&reg_vcam_1v2>;
1051                 vddio-supply = <&reg_csi_1v8>;
1052                 rotation = <90>;
1053                 orientation = <0>;
1054
1055                 port {
1056                         camera1_ep: endpoint {
1057                                 data-lanes = <1 2>;
1058                                 link-frequencies = /bits/ 64
1059                                         <80000000 200000000 300000000>;
1060                                 remote-endpoint = <&mipi1_sensor_ep>;
1061                         };
1062                 };
1063         };
1064
1065         backlight@36 {
1066                 compatible = "ti,lm36922";
1067                 reg = <0x36>;
1068                 pinctrl-names = "default";
1069                 pinctrl-0 = <&pinctrl_bl>;
1070                 #address-cells = <1>;
1071                 #size-cells = <0>;
1072                 enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
1073                 vled-supply = <&reg_vsys_3v4>;
1074                 ti,ovp-microvolt = <25000000>;
1075
1076                 led_backlight: led@0 {
1077                         reg = <0>;
1078                         label = ":backlight";
1079                         linux,default-trigger = "backlight";
1080                         led-max-microamp = <20000>;
1081                 };
1082         };
1083
1084         touchscreen@38 {
1085                 compatible = "edt,edt-ft5506";
1086                 reg = <0x38>;
1087                 pinctrl-names = "default";
1088                 pinctrl-0 = <&pinctrl_touch>;
1089                 interrupt-parent = <&gpio1>;
1090                 interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
1091                 touchscreen-size-x = <720>;
1092                 touchscreen-size-y = <1440>;
1093                 vcc-supply = <&reg_lcd_1v8>;
1094         };
1095 };
1096
1097 &i2c4 {
1098         clock-frequency = <387000>;
1099         pinctrl-names = "default";
1100         pinctrl-0 = <&pinctrl_i2c4>;
1101         status = "okay";
1102
1103         vcm@c {
1104                 compatible = "dongwoon,dw9714";
1105                 reg = <0x0c>;
1106                 vcc-supply = <&reg_csi_1v8>;
1107         };
1108
1109         bat: fuel-gauge@36 {
1110                 compatible = "maxim,max17055";
1111                 reg = <0x36>;
1112                 interrupt-parent = <&gpio3>;
1113                 interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
1114                 pinctrl-names = "default";
1115                 pinctrl-0 = <&pinctrl_gauge>;
1116                 power-supplies = <&bq25895>;
1117                 maxim,over-heat-temp = <700>;
1118                 maxim,over-volt = <4500>;
1119                 maxim,rsns-microohm = <5000>;
1120         };
1121
1122         bq25895: charger@6a {
1123                 compatible = "ti,bq25895", "ti,bq25890";
1124                 reg = <0x6a>;
1125                 pinctrl-names = "default";
1126                 pinctrl-0 = <&pinctrl_charger_in>;
1127                 interrupt-parent = <&gpio3>;
1128                 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
1129                 phys = <&usb3_phy0>;
1130                 ti,precharge-current = <130000>; /* uA */
1131                 ti,minimum-sys-voltage = <3700000>; /* uV */
1132                 ti,boost-voltage = <5000000>; /* uV */
1133                 ti,boost-max-current = <1500000>; /* uA */
1134                 ti,use-vinmin-threshold = <1>; /* enable VINDPM */
1135                 ti,vinmin-threshold = <3900000>; /* uV */
1136                 monitored-battery = <&bat>;
1137                 power-supplies = <&typec_pd>;
1138         };
1139 };
1140
1141 &lcdif {
1142         status = "okay";
1143 };
1144
1145 &mipi_csi1 {
1146         status = "okay";
1147
1148         ports {
1149                 port@0 {
1150                         reg = <0>;
1151
1152                         mipi1_sensor_ep: endpoint {
1153                                 remote-endpoint = <&camera1_ep>;
1154                                 data-lanes = <1 2>;
1155                         };
1156                 };
1157         };
1158 };
1159
1160 &mipi_dsi {
1161         #address-cells = <1>;
1162         #size-cells = <0>;
1163         status = "okay";
1164
1165         lcd_panel: panel@0 {
1166                 compatible = "mantix,mlaf057we51-x";
1167                 reg = <0>;
1168                 pinctrl-names = "default";
1169                 pinctrl-0 = <&pinctrl_dsirst>;
1170                 avdd-supply = <&reg_lcd_avdd>;
1171                 avee-supply = <&reg_lcd_avee>;
1172                 vddi-supply = <&reg_lcd_1v8>;
1173                 backlight = <&backlight_dsi>;
1174                 reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
1175                 mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
1176
1177                 port {
1178                         panel_in: endpoint {
1179                                 remote-endpoint = <&mipi_dsi_out>;
1180                         };
1181                 };
1182         };
1183
1184         ports {
1185                 port@1 {
1186                         reg = <1>;
1187
1188                         mipi_dsi_out: endpoint {
1189                                 remote-endpoint = <&panel_in>;
1190                         };
1191                 };
1192         };
1193 };
1194
1195 &pgc_gpu {
1196         power-supply = <&buck3_reg>;
1197 };
1198
1199 &pgc_mipi {
1200         power-supply = <&ldo5_reg>;
1201 };
1202
1203 &pgc_vpu {
1204         power-supply = <&buck4_reg>;
1205 };
1206
1207 &pwm1 {
1208         pinctrl-names = "default";
1209         pinctrl-0 = <&pinctrl_haptic>;
1210         status = "okay";
1211 };
1212
1213 &pwm2 {
1214         pinctrl-names = "default";
1215         pinctrl-0 = <&pinctrl_led_b>;
1216         status = "okay";
1217 };
1218
1219 &pwm3 {
1220         pinctrl-names = "default";
1221         pinctrl-0 = <&pinctrl_led_r>;
1222         status = "okay";
1223 };
1224
1225 &pwm4 {
1226         pinctrl-names = "default";
1227         pinctrl-0 = <&pinctrl_led_g>;
1228         status = "okay";
1229 };
1230
1231 &sai2 {
1232         pinctrl-names = "default";
1233         pinctrl-0 = <&pinctrl_sai2>;
1234         assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
1235         assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
1236         assigned-clock-rates = <24576000>;
1237         status = "okay";
1238 };
1239
1240 &sai6 {
1241         pinctrl-names = "default";
1242         pinctrl-0 = <&pinctrl_sai6>;
1243         assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
1244         assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
1245         assigned-clock-rates = <24576000>;
1246         fsl,sai-synchronous-rx;
1247         status = "okay";
1248 };
1249
1250 &snvs_pwrkey {
1251         status = "okay";
1252 };
1253
1254 &snvs_rtc {
1255         status = "disabled";
1256 };
1257
1258 &uart1 { /* console */
1259         pinctrl-names = "default";
1260         pinctrl-0 = <&pinctrl_uart1>;
1261         status = "okay";
1262 };
1263
1264 &uart2 { /* TPS - GPS - DEBUG */
1265         pinctrl-names = "default";
1266         pinctrl-0 = <&pinctrl_uart2>;
1267         status = "okay";
1268
1269         gnss {
1270                 compatible = "globaltop,pa6h";
1271                 vcc-supply = <&reg_gnss>;
1272                 current-speed = <9600>;
1273         };
1274 };
1275
1276 &uart3 { /* SMC */
1277         pinctrl-names = "default";
1278         pinctrl-0 = <&pinctrl_uart3>;
1279         status = "okay";
1280 };
1281
1282 &uart4 { /* BT */
1283         pinctrl-names = "default";
1284         pinctrl-0 = <&pinctrl_uart4>;
1285         uart-has-rtscts;
1286         status = "okay";
1287 };
1288
1289 &usb3_phy0 {
1290         status = "okay";
1291 };
1292
1293 &usb3_phy1 {
1294         vbus-supply = <&reg_hub>;
1295         status = "okay";
1296 };
1297
1298 &usb_dwc3_0 {
1299         #address-cells = <1>;
1300         #size-cells = <0>;
1301         dr_mode = "otg";
1302         usb-role-switch;
1303         status = "okay";
1304
1305         port@0 {
1306                 reg = <0>;
1307
1308                 typec_hs: endpoint {
1309                         remote-endpoint = <&usb_con_hs>;
1310                 };
1311         };
1312
1313         port@1 {
1314                 reg = <1>;
1315
1316                 typec_ss: endpoint {
1317                         remote-endpoint = <&usb_con_ss>;
1318                 };
1319         };
1320 };
1321
1322 &usb_dwc3_1 {
1323         dr_mode = "host";
1324         status = "okay";
1325         #address-cells = <1>;
1326         #size-cells = <0>;
1327
1328         /* Microchip USB2642 */
1329         hub@1 {
1330                 compatible = "usb424,2640";
1331                 reg = <1>;
1332                 #address-cells = <1>;
1333                 #size-cells = <0>;
1334
1335                 mass-storage@1 {
1336                         compatible = "usb424,4041";
1337                         reg = <1>;
1338                 };
1339         };
1340 };
1341
1342 &usdhc1 {
1343         assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
1344         assigned-clock-rates = <400000000>;
1345         pinctrl-names = "default", "state_100mhz", "state_200mhz";
1346         pinctrl-0 = <&pinctrl_usdhc1>;
1347         pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
1348         pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
1349         bus-width = <8>;
1350         vmmc-supply = <&reg_vdd_3v3>;
1351         power-supply = <&reg_vdd_1v8>;
1352         non-removable;
1353         status = "okay";
1354 };
1355
1356 &usdhc2 {
1357         assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
1358         assigned-clock-rates = <200000000>;
1359         pinctrl-names = "default", "state_100mhz", "state_200mhz";
1360         pinctrl-0 = <&pinctrl_usdhc2>;
1361         pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
1362         pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
1363         bus-width = <4>;
1364         vmmc-supply = <&reg_wifi_3v3>;
1365         mmc-pwrseq = <&usdhc2_pwrseq>;
1366         post-power-on-delay-ms = <1000>;
1367         cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
1368         max-frequency = <50000000>;
1369         disable-wp;
1370         cap-sdio-irq;
1371         keep-power-in-suspend;
1372         wakeup-source;
1373         status = "okay";
1374 };
1375
1376 &wdog1 {
1377         pinctrl-names = "default";
1378         pinctrl-0 = <&pinctrl_wdog>;
1379         fsl,ext-reset-output;
1380         status = "okay";
1381 };