1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include "imx8mn-evk.dtsi"
7 #include <dt-bindings/interrupt-controller/irq.h>
10 model = "NXP i.MX8MNano DDR3L EVK board";
11 compatible = "fsl,imx8mn-ddr3l-evk", "fsl,imx8mn";
15 cpu-supply = <&buck1>;
19 cpu-supply = <&buck1>;
23 cpu-supply = <&buck1>;
27 cpu-supply = <&buck1>;
32 compatible = "nxp,pca9450b";
34 pinctrl-names = "default";
35 pinctrl-0 = <&pinctrl_pmic>;
36 interrupt-parent = <&gpio1>;
37 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
41 regulator-name = "VDD_SOC_0V9";
42 regulator-min-microvolt = <850000>;
43 regulator-max-microvolt = <950000>;
46 regulator-ramp-delay = <3125>;
50 regulator-name = "VDD_3V3";
51 regulator-min-microvolt = <3300000>;
52 regulator-max-microvolt = <3300000>;
58 regulator-name = "VDD_1V8";
59 regulator-min-microvolt = <1800000>;
60 regulator-max-microvolt = <1800000>;
66 regulator-name = "NVCC_DRAM_1V35";
67 regulator-min-microvolt = <1350000>;
68 regulator-max-microvolt = <1350000>;
74 regulator-name = "NVCC_SNVS_1V8";
75 regulator-min-microvolt = <1800000>;
76 regulator-max-microvolt = <1800000>;
82 regulator-name = "VDD_SNVS_0V8";
83 regulator-min-microvolt = <800000>;
84 regulator-max-microvolt = <800000>;
90 regulator-name = "VDDA_1V8";
91 regulator-min-microvolt = <1800000>;
92 regulator-max-microvolt = <1800000>;
98 regulator-name = "VDD_PHY_1V2";
99 regulator-min-microvolt = <1200000>;
100 regulator-max-microvolt = <1200000>;
106 regulator-name = "NVCC_SD2";
107 regulator-min-microvolt = <1800000>;
108 regulator-max-microvolt = <3300000>;