Linux 6.7-rc7
[linux-modified.git] / arch / arm64 / boot / dts / freescale / imx8mn-beacon-baseboard.dtsi
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2 /*
3  * Copyright 2020 Compass Electronics Group, LLC
4  */
5
6 / {
7         dmic_codec: dmic-codec {
8                 compatible = "dmic-codec";
9                 num-channels = <1>;
10                 #sound-dai-cells = <0>;
11         };
12
13         leds {
14                 compatible = "gpio-leds";
15
16                 led-0 {
17                         label = "gen_led0";
18                         gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
19                         default-state = "off";
20                 };
21
22                 led-1 {
23                         label = "gen_led1";
24                         gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
25                         default-state = "off";
26                 };
27
28                 led-2 {
29                         label = "gen_led2";
30                         gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
31                         default-state = "off";
32                 };
33
34                 led-3 {
35                         pinctrl-names = "default";
36                         pinctrl-0 = <&pinctrl_led3>;
37                         label = "heartbeat";
38                         gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
39                         linux,default-trigger = "heartbeat";
40                 };
41         };
42
43         reg_audio: regulator-audio {
44                 compatible = "regulator-fixed";
45                 regulator-name = "3v3_aud";
46                 regulator-min-microvolt = <3300000>;
47                 regulator-max-microvolt = <3300000>;
48                 gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
49                 enable-active-high;
50         };
51
52         reg_camera: regulator-camera {
53                 compatible = "regulator-fixed";
54                 regulator-name = "mipi_pwr";
55                 regulator-min-microvolt = <2800000>;
56                 regulator-max-microvolt = <2800000>;
57                 gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
58                 enable-active-high;
59                 startup-delay-us = <100000>;
60                 regulator-always-on;
61         };
62
63         reg_usdhc2_vmmc: regulator-usdhc2 {
64                 compatible = "regulator-fixed";
65                 regulator-name = "vsd_3v3";
66                 regulator-min-microvolt = <3300000>;
67                 regulator-max-microvolt = <3300000>;
68                 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
69                 enable-active-high;
70         };
71
72         reg_usb_otg_vbus: regulator-usb {
73                 compatible = "regulator-fixed";
74                 pinctrl-names = "default";
75                 pinctrl-0 = <&pinctrl_reg_usb_otg>;
76                 regulator-name = "usb_otg_vbus";
77                 regulator-min-microvolt = <5000000>;
78                 regulator-max-microvolt = <5000000>;
79                 gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
80                 enable-active-high;
81         };
82
83         sound-dmic {
84                 compatible = "simple-audio-card";
85                 simple-audio-card,name = "dmic";
86                 simple-audio-card,format = "pdm";
87                 simple-audio-card,bitclock-master = <&dailink_master>;
88                 simple-audio-card,frame-master = <&dailink_master>;
89
90                 dailink_master: simple-audio-card,cpu {
91                         sound-dai = <&micfil>;
92                 };
93
94                 simple-audio-card,codec {
95                         sound-dai = <&dmic_codec>;
96                 };
97         };
98
99         sound-wm8962 {
100                 compatible = "simple-audio-card";
101                 simple-audio-card,name = "wm8962";
102                 simple-audio-card,format = "i2s";
103                 simple-audio-card,widgets = "Headphone", "Headphones",
104                                             "Microphone", "Headset Mic",
105                                             "Speaker", "Speaker";
106                 simple-audio-card,routing = "Headphones", "HPOUTL",
107                                             "Headphones", "HPOUTR",
108                                             "Speaker", "SPKOUTL",
109                                             "Speaker", "SPKOUTR",
110                                             "Headset Mic", "MICBIAS",
111                                             "IN3R", "Headset Mic";
112
113                 simple-audio-card,cpu {
114                         sound-dai = <&sai3>;
115                 };
116
117                 simple-audio-card,codec {
118                         sound-dai = <&wm8962>;
119                         clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
120                         frame-master;
121                         bitclock-master;
122                 };
123         };
124 };
125
126 &ecspi2 {
127         pinctrl-names = "default";
128         pinctrl-0 = <&pinctrl_espi2>;
129         cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
130         status = "okay";
131
132         eeprom@0 {
133                 compatible = "microchip,at25160bn", "atmel,at25";
134                 reg = <0>;
135                 spi-max-frequency = <5000000>;
136                 spi-cpha;
137                 spi-cpol;
138                 pagesize = <32>;
139                 size = <2048>;
140                 address-width = <16>;
141         };
142 };
143
144 &i2c2 {
145         clock-frequency = <384000>;
146         pinctrl-names = "default";
147         pinctrl-0 = <&pinctrl_i2c2>;
148         status = "okay";
149
150         camera@10 {
151                 compatible = "ovti,ov5640";
152                 pinctrl-names = "default";
153                 pinctrl-0 = <&pinctrl_ov5640>;
154                 reg = <0x10>;
155                 clocks = <&clk IMX8MN_CLK_CLKO1>;
156                 clock-names = "xclk";
157                 assigned-clocks = <&clk IMX8MN_CLK_CLKO1>;
158                 assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
159                 assigned-clock-rates = <24000000>;
160                 AVDD-supply = <&reg_camera>;  /* 2.8v */
161                 powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
162                 reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
163
164                 port {
165                         /* MIPI CSI-2 bus endpoint */
166                         ov5640_to_mipi_csi2: endpoint {
167                                 remote-endpoint = <&mipi_csi_in>;
168                                 clock-lanes = <0>;
169                                 data-lanes = <1 2>;
170                         };
171                 };
172         };
173 };
174 &i2c4 {
175         clock-frequency = <400000>;
176         pinctrl-names = "default";
177         pinctrl-0 = <&pinctrl_i2c4>;
178         status = "okay";
179
180         pca6416_0: gpio@20 {
181                 compatible = "nxp,pcal6416";
182                 reg = <0x20>;
183                 pinctrl-names = "default";
184                 pinctrl-0 = <&pinctrl_pcal6414>;
185                 gpio-controller;
186                 #gpio-cells = <2>;
187                 interrupt-parent = <&gpio4>;
188                 interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
189         };
190
191         pca6416_1: gpio@21 {
192                 compatible = "nxp,pcal6416";
193                 reg = <0x21>;
194                 gpio-controller;
195                 #gpio-cells = <2>;
196                 interrupt-parent = <&gpio4>;
197                 interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
198         };
199
200         wm8962: audio-codec@1a {
201                 compatible = "wlf,wm8962";
202                 reg = <0x1a>;
203                 clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
204                 DCVDD-supply = <&reg_audio>;
205                 DBVDD-supply = <&reg_audio>;
206                 AVDD-supply = <&reg_audio>;
207                 CPVDD-supply = <&reg_audio>;
208                 MICVDD-supply = <&reg_audio>;
209                 PLLVDD-supply = <&reg_audio>;
210                 SPKVDD1-supply = <&reg_audio>;
211                 SPKVDD2-supply = <&reg_audio>;
212                 gpio-cfg = <
213                         0x0000 /* 0:Default */
214                         0x0000 /* 1:Default */
215                         0x0000 /* 2:FN_DMICCLK */
216                         0x0000 /* 3:Default */
217                         0x0000 /* 4:FN_DMICCDAT */
218                         0x0000 /* 5:Default */
219                 >;
220                 #sound-dai-cells = <0>;
221         };
222 };
223
224 &isi {
225         status = "okay";
226 };
227
228 &easrc {
229         fsl,asrc-rate = <48000>;
230         status = "okay";
231 };
232
233 &mipi_csi {
234         status = "okay";
235
236         ports {
237                 port@0 {
238                         mipi_csi_in: endpoint {
239                                 remote-endpoint = <&ov5640_to_mipi_csi2>;
240                                 data-lanes = <1 2>;
241                         };
242                 };
243         };
244 };
245
246 &micfil {
247         pinctrl-names = "default";
248         pinctrl-0 = <&pinctrl_pdm>;
249         assigned-clocks = <&clk IMX8MN_CLK_PDM>;
250         assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
251         assigned-clock-rates = <49152000>;
252         status = "okay";
253 };
254
255 &sai3 {
256         pinctrl-names = "default";
257         pinctrl-0 = <&pinctrl_sai3>;
258         assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
259         assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
260         assigned-clock-rates = <24576000>;
261         fsl,sai-mclk-direction-output;
262         status = "okay";
263 };
264
265 &snvs_pwrkey {
266         status = "okay";
267 };
268
269 &uart2 { /* console */
270         pinctrl-names = "default";
271         pinctrl-0 = <&pinctrl_uart2>;
272         status = "okay";
273 };
274
275 &uart3 {
276         pinctrl-names = "default";
277         pinctrl-0 = <&pinctrl_uart3>;
278         assigned-clocks = <&clk IMX8MN_CLK_UART3>;
279         assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
280         uart-has-rtscts;
281         status = "okay";
282 };
283
284 &usbotg1 {
285         vbus-supply = <&reg_usb_otg_vbus>;
286         disable-over-current;
287         dr_mode = "otg";
288         status = "okay";
289 };
290
291 &usdhc2 {
292         pinctrl-names = "default", "state_100mhz", "state_200mhz";
293         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
294         pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
295         pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
296         bus-width = <4>;
297         vmmc-supply = <&reg_usdhc2_vmmc>;
298         status = "okay";
299 };
300
301 &iomuxc {
302         pinctrl_espi2: espi2grp {
303                 fsl,pins = <
304                         MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK            0x82
305                         MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI            0x82
306                         MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO            0x82
307                         MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13              0x41
308                 >;
309         };
310
311         pinctrl_i2c2: i2c2grp {
312                 fsl,pins = <
313                         MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL          0x400001c3
314                         MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA          0x400001c3
315                 >;
316         };
317
318         pinctrl_i2c4: i2c4grp {
319                 fsl,pins = <
320                         MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL          0x400001c3
321                         MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA          0x400001c3
322                 >;
323         };
324
325         pinctrl_led3: led3grp {
326                 fsl,pins = <
327                         MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28       0x41
328                 >;
329         };
330
331         pinctrl_ov5640: ov5640grp {
332                 fsl,pins = <
333                         MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7               0x19
334                         MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6               0x19
335                         MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1      0x59
336                 >;
337         };
338
339         pinctrl_pcal6414: pcal6414-gpiogrp {
340                 fsl,pins = <
341                         MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27               0x19
342                 >;
343         };
344
345         pinctrl_pdm: pdmgrp {
346                 fsl,pins = <
347                         MX8MN_IOMUXC_SAI5_RXC_PDM_CLK   0xd6
348                         MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0  0xd6
349                 >;
350         };
351
352         pinctrl_reg_usb_otg: reg-otggrp {
353                 fsl,pins = <
354                         MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
355                 >;
356         };
357
358         pinctrl_sai3: sai3grp {
359                 fsl,pins = <
360                         MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
361                         MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
362                         MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
363                         MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
364                         MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0     0xd6
365                 >;
366         };
367
368         pinctrl_uart2: uart2grp {
369                 fsl,pins = <
370                         MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
371                         MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
372                 >;
373         };
374
375         pinctrl_uart3: uart3grp {
376                 fsl,pins = <
377                         MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX   0x40
378                         MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX   0x40
379                         MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B        0x40
380                         MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40
381                 >;
382         };
383
384         pinctrl_usdhc2_gpio: usdhc2gpiogrp {
385                 fsl,pins = <
386                         MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B       0x41
387                         MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x41
388                 >;
389         };
390
391         pinctrl_usdhc2: usdhc2grp {
392                 fsl,pins = <
393                         MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
394                         MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
395                         MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d0
396                         MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d0
397                         MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d0
398                         MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d0
399                         MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
400                 >;
401         };
402
403         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
404                 fsl,pins = <
405                         MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
406                         MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
407                         MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d4
408                         MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d4
409                         MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d4
410                         MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d4
411                         MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
412                 >;
413         };
414
415         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
416                 fsl,pins = <
417                         MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
418                         MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
419                         MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d6
420                         MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d6
421                         MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d6
422                         MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d6
423                         MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
424                 >;
425         };
426 };