arch/arm64/boot/dts/freescale/imx8mm.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright 2019 NXP
   4  */
   5
   6 #include <dt-bindings/clock/imx8mm-clock.h>
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/input/input.h>
   9 #include <dt-bindings/interrupt-controller/arm-gic.h>
  10 #include <dt-bindings/power/imx8mm-power.h>
  11 #include <dt-bindings/reset/imx8mq-reset.h>
  12 #include <dt-bindings/thermal/thermal.h>
  13
  14 #include "imx8mm-pinfunc.h"
  15
  16 / {
  17         interrupt-parent = <&gic>;
  18         #address-cells = <2>;
  19         #size-cells = <2>;
  20
  21         aliases {
  22                 ethernet0 = &fec1;
  23                 gpio0 = &gpio1;
  24                 gpio1 = &gpio2;
  25                 gpio2 = &gpio3;
  26                 gpio3 = &gpio4;
  27                 gpio4 = &gpio5;
  28                 i2c0 = &i2c1;
  29                 i2c1 = &i2c2;
  30                 i2c2 = &i2c3;
  31                 i2c3 = &i2c4;
  32                 mmc0 = &usdhc1;
  33                 mmc1 = &usdhc2;
  34                 mmc2 = &usdhc3;
  35                 serial0 = &uart1;
  36                 serial1 = &uart2;
  37                 serial2 = &uart3;
  38                 serial3 = &uart4;
  39                 spi0 = &ecspi1;
  40                 spi1 = &ecspi2;
  41                 spi2 = &ecspi3;
  42         };
  43
  44         cpus {
  45                 #address-cells = <1>;
  46                 #size-cells = <0>;
  47
  48                 idle-states {
  49                         entry-method = "psci";
  50
  51                         cpu_pd_wait: cpu-pd-wait {
  52                                 compatible = "arm,idle-state";
  53                                 arm,psci-suspend-param = <0x0010033>;
  54                                 local-timer-stop;
  55                                 entry-latency-us = <1000>;
  56                                 exit-latency-us = <700>;
  57                                 min-residency-us = <2700>;
  58                         };
  59                 };
  60
  61                 A53_0: cpu@0 {
  62                         device_type = "cpu";
  63                         compatible = "arm,cortex-a53";
  64                         reg = <0x0>;
  65                         clock-latency = <61036>; /* two CLK32 periods */
  66                         clocks = <&clk IMX8MM_CLK_ARM>;
  67                         enable-method = "psci";
  68                         i-cache-size = <0x8000>;
  69                         i-cache-line-size = <64>;
  70                         i-cache-sets = <256>;
  71                         d-cache-size = <0x8000>;
  72                         d-cache-line-size = <64>;
  73                         d-cache-sets = <128>;
  74                         next-level-cache = <&A53_L2>;
  75                         operating-points-v2 = <&a53_opp_table>;
  76                         nvmem-cells = <&cpu_speed_grade>;
  77                         nvmem-cell-names = "speed_grade";
  78                         cpu-idle-states = <&cpu_pd_wait>;
  79                         #cooling-cells = <2>;
  80                 };
  81
  82                 A53_1: cpu@1 {
  83                         device_type = "cpu";
  84                         compatible = "arm,cortex-a53";
  85                         reg = <0x1>;
  86                         clock-latency = <61036>; /* two CLK32 periods */
  87                         clocks = <&clk IMX8MM_CLK_ARM>;
  88                         enable-method = "psci";
  89                         i-cache-size = <0x8000>;
  90                         i-cache-line-size = <64>;
  91                         i-cache-sets = <256>;
  92                         d-cache-size = <0x8000>;
  93                         d-cache-line-size = <64>;
  94                         d-cache-sets = <128>;
  95                         next-level-cache = <&A53_L2>;
  96                         operating-points-v2 = <&a53_opp_table>;
  97                         cpu-idle-states = <&cpu_pd_wait>;
  98                         #cooling-cells = <2>;
  99                 };
 100
 101                 A53_2: cpu@2 {
 102                         device_type = "cpu";
 103                         compatible = "arm,cortex-a53";
 104                         reg = <0x2>;
 105                         clock-latency = <61036>; /* two CLK32 periods */
 106                         clocks = <&clk IMX8MM_CLK_ARM>;
 107                         enable-method = "psci";
 108                         i-cache-size = <0x8000>;
 109                         i-cache-line-size = <64>;
 110                         i-cache-sets = <256>;
 111                         d-cache-size = <0x8000>;
 112                         d-cache-line-size = <64>;
 113                         d-cache-sets = <128>;
 114                         next-level-cache = <&A53_L2>;
 115                         operating-points-v2 = <&a53_opp_table>;
 116                         cpu-idle-states = <&cpu_pd_wait>;
 117                         #cooling-cells = <2>;
 118                 };
 119
 120                 A53_3: cpu@3 {
 121                         device_type = "cpu";
 122                         compatible = "arm,cortex-a53";
 123                         reg = <0x3>;
 124                         clock-latency = <61036>; /* two CLK32 periods */
 125                         clocks = <&clk IMX8MM_CLK_ARM>;
 126                         enable-method = "psci";
 127                         i-cache-size = <0x8000>;
 128                         i-cache-line-size = <64>;
 129                         i-cache-sets = <256>;
 130                         d-cache-size = <0x8000>;
 131                         d-cache-line-size = <64>;
 132                         d-cache-sets = <128>;
 133                         next-level-cache = <&A53_L2>;
 134                         operating-points-v2 = <&a53_opp_table>;
 135                         cpu-idle-states = <&cpu_pd_wait>;
 136                         #cooling-cells = <2>;
 137                 };
 138
 139                 A53_L2: l2-cache0 {
 140                         compatible = "cache";
 141                         cache-level = <2>;
 142                         cache-unified;
 143                         cache-size = <0x80000>;
 144                         cache-line-size = <64>;
 145                         cache-sets = <512>;
 146                 };
 147         };
 148
 149         a53_opp_table: opp-table {
 150                 compatible = "operating-points-v2";
 151                 opp-shared;
 152
 153                 opp-1200000000 {
 154                         opp-hz = /bits/ 64 <1200000000>;
 155                         opp-microvolt = <850000>;
 156                         opp-supported-hw = <0xe>, <0x7>;
 157                         clock-latency-ns = <150000>;
 158                         opp-suspend;
 159                 };
 160
 161                 opp-1600000000 {
 162                         opp-hz = /bits/ 64 <1600000000>;
 163                         opp-microvolt = <950000>;
 164                         opp-supported-hw = <0xc>, <0x7>;
 165                         clock-latency-ns = <150000>;
 166                         opp-suspend;
 167                 };
 168
 169                 opp-1800000000 {
 170                         opp-hz = /bits/ 64 <1800000000>;
 171                         opp-microvolt = <1000000>;
 172                         opp-supported-hw = <0x8>, <0x3>;
 173                         clock-latency-ns = <150000>;
 174                         opp-suspend;
 175                 };
 176         };
 177
 178         osc_32k: clock-osc-32k {
 179                 compatible = "fixed-clock";
 180                 #clock-cells = <0>;
 181                 clock-frequency = <32768>;
 182                 clock-output-names = "osc_32k";
 183         };
 184
 185         osc_24m: clock-osc-24m {
 186                 compatible = "fixed-clock";
 187                 #clock-cells = <0>;
 188                 clock-frequency = <24000000>;
 189                 clock-output-names = "osc_24m";
 190         };
 191
 192         clk_ext1: clock-ext1 {
 193                 compatible = "fixed-clock";
 194                 #clock-cells = <0>;
 195                 clock-frequency = <133000000>;
 196                 clock-output-names = "clk_ext1";
 197         };
 198
 199         clk_ext2: clock-ext2 {
 200                 compatible = "fixed-clock";
 201                 #clock-cells = <0>;
 202                 clock-frequency = <133000000>;
 203                 clock-output-names = "clk_ext2";
 204         };
 205
 206         clk_ext3: clock-ext3 {
 207                 compatible = "fixed-clock";
 208                 #clock-cells = <0>;
 209                 clock-frequency = <133000000>;
 210                 clock-output-names = "clk_ext3";
 211         };
 212
 213         clk_ext4: clock-ext4 {
 214                 compatible = "fixed-clock";
 215                 #clock-cells = <0>;
 216                 clock-frequency = <133000000>;
 217                 clock-output-names = "clk_ext4";
 218         };
 219
 220         psci {
 221                 compatible = "arm,psci-1.0";
 222                 method = "smc";
 223         };
 224
 225         pmu {
 226                 compatible = "arm,cortex-a53-pmu";
 227                 interrupts = <GIC_PPI 7
 228                              (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 229         };
 230
 231         timer {
 232                 compatible = "arm,armv8-timer";
 233                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
 234                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
 235                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
 236                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
 237                 clock-frequency = <8000000>;
 238                 arm,no-tick-in-suspend;
 239         };
 240
 241         thermal-zones {
 242                 cpu-thermal {
 243                         polling-delay-passive = <250>;
 244                         polling-delay = <2000>;
 245                         thermal-sensors = <&tmu>;
 246                         trips {
 247                                 cpu_alert0: trip0 {
 248                                         temperature = <85000>;
 249                                         hysteresis = <2000>;
 250                                         type = "passive";
 251                                 };
 252
 253                                 cpu_crit0: trip1 {
 254                                         temperature = <95000>;
 255                                         hysteresis = <2000>;
 256                                         type = "critical";
 257                                 };
 258                         };
 259
 260                         cooling-maps {
 261                                 map0 {
 262                                         trip = <&cpu_alert0>;
 263                                         cooling-device =
 264                                                 <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 265                                                 <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 266                                                 <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 267                                                 <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 268                                 };
 269                         };
 270                 };
 271         };
 272
 273         usbphynop1: usbphynop1 {
 274                 #phy-cells = <0>;
 275                 compatible = "usb-nop-xceiv";
 276                 clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 277                 assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 278                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 279                 clock-names = "main_clk";
 280                 power-domains = <&pgc_otg1>;
 281         };
 282
 283         usbphynop2: usbphynop2 {
 284                 #phy-cells = <0>;
 285                 compatible = "usb-nop-xceiv";
 286                 clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 287                 assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 288                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 289                 clock-names = "main_clk";
 290                 power-domains = <&pgc_otg2>;
 291         };
 292
 293         soc: soc@0 {
 294                 compatible = "fsl,imx8mm-soc", "simple-bus";
 295                 #address-cells = <1>;
 296                 #size-cells = <1>;
 297                 ranges = <0x0 0x0 0x0 0x3e000000>;
 298                 dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
 299                 nvmem-cells = <&imx8mm_uid>;
 300                 nvmem-cell-names = "soc_unique_id";
 301
 302                 aips1: bus@30000000 {
 303                         compatible = "fsl,aips-bus", "simple-bus";
 304                         reg = <0x30000000 0x400000>;
 305                         #address-cells = <1>;
 306                         #size-cells = <1>;
 307                         ranges = <0x30000000 0x30000000 0x400000>;
 308
 309                         spba2: spba-bus@30000000 {
 310                                 compatible = "fsl,spba-bus", "simple-bus";
 311                                 #address-cells = <1>;
 312                                 #size-cells = <1>;
 313                                 reg = <0x30000000 0x100000>;
 314                                 ranges;
 315
 316                                 sai1: sai@30010000 {
 317                                         #sound-dai-cells = <0>;
 318                                         compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 319                                         reg = <0x30010000 0x10000>;
 320                                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 321                                         clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
 322                                                  <&clk IMX8MM_CLK_SAI1_ROOT>,
 323                                                  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 324                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 325                                         dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
 326                                         dma-names = "rx", "tx";
 327                                         status = "disabled";
 328                                 };
 329
 330                                 sai2: sai@30020000 {
 331                                         #sound-dai-cells = <0>;
 332                                         compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 333                                         reg = <0x30020000 0x10000>;
 334                                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 335                                         clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
 336                                                 <&clk IMX8MM_CLK_SAI2_ROOT>,
 337                                                 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 338                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 339                                         dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
 340                                         dma-names = "rx", "tx";
 341                                         status = "disabled";
 342                                 };
 343
 344                                 sai3: sai@30030000 {
 345                                         #sound-dai-cells = <0>;
 346                                         compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 347                                         reg = <0x30030000 0x10000>;
 348                                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 349                                         clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
 350                                                  <&clk IMX8MM_CLK_SAI3_ROOT>,
 351                                                  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 352                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 353                                         dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
 354                                         dma-names = "rx", "tx";
 355                                         status = "disabled";
 356                                 };
 357
 358                                 sai5: sai@30050000 {
 359                                         #sound-dai-cells = <0>;
 360                                         compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 361                                         reg = <0x30050000 0x10000>;
 362                                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 363                                         clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
 364                                                  <&clk IMX8MM_CLK_SAI5_ROOT>,
 365                                                  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 366                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 367                                         dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
 368                                         dma-names = "rx", "tx";
 369                                         status = "disabled";
 370                                 };
 371
 372                                 sai6: sai@30060000 {
 373                                         #sound-dai-cells = <0>;
 374                                         compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
 375                                         reg = <0x30060000 0x10000>;
 376                                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 377                                         clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
 378                                                  <&clk IMX8MM_CLK_SAI6_ROOT>,
 379                                                  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 380                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 381                                         dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
 382                                         dma-names = "rx", "tx";
 383                                         status = "disabled";
 384                                 };
 385
 386                                 micfil: audio-controller@30080000 {
 387                                         compatible = "fsl,imx8mm-micfil";
 388                                         reg = <0x30080000 0x10000>;
 389                                         interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
 390                                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 391                                                      <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
 392                                                      <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 393                                         clocks = <&clk IMX8MM_CLK_PDM_IPG>,
 394                                                  <&clk IMX8MM_CLK_PDM_ROOT>,
 395                                                  <&clk IMX8MM_AUDIO_PLL1_OUT>,
 396                                                  <&clk IMX8MM_AUDIO_PLL2_OUT>,
 397                                                  <&clk IMX8MM_CLK_EXT3>;
 398                                         clock-names = "ipg_clk", "ipg_clk_app",
 399                                                       "pll8k", "pll11k", "clkext3";
 400                                         dmas = <&sdma2 24 25 0x80000000>;
 401                                         dma-names = "rx";
 402                                         #sound-dai-cells = <0>;
 403                                         status = "disabled";
 404                                 };
 405
 406                                 spdif1: spdif@30090000 {
 407                                         compatible = "fsl,imx35-spdif";
 408                                         reg = <0x30090000 0x10000>;
 409                                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 410                                         clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
 411                                                  <&clk IMX8MM_CLK_24M>, /* rxtx0 */
 412                                                  <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
 413                                                  <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
 414                                                  <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
 415                                                  <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
 416                                                  <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
 417                                                  <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
 418                                                  <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
 419                                                  <&clk IMX8MM_CLK_DUMMY>; /* spba */
 420                                         clock-names = "core", "rxtx0",
 421                                                       "rxtx1", "rxtx2",
 422                                                       "rxtx3", "rxtx4",
 423                                                       "rxtx5", "rxtx6",
 424                                                       "rxtx7", "spba";
 425                                         dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
 426                                         dma-names = "rx", "tx";
 427                                         status = "disabled";
 428                                 };
 429                         };
 430
 431                         gpio1: gpio@30200000 {
 432                                 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 433                                 reg = <0x30200000 0x10000>;
 434                                 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
 435                                              <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 436                                 clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
 437                                 gpio-controller;
 438                                 #gpio-cells = <2>;
 439                                 interrupt-controller;
 440                                 #interrupt-cells = <2>;
 441                                 gpio-ranges = <&iomuxc 0 10 30>;
 442                         };
 443
 444                         gpio2: gpio@30210000 {
 445                                 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 446                                 reg = <0x30210000 0x10000>;
 447                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 448                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 449                                 clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
 450                                 gpio-controller;
 451                                 #gpio-cells = <2>;
 452                                 interrupt-controller;
 453                                 #interrupt-cells = <2>;
 454                                 gpio-ranges = <&iomuxc 0 40 21>;
 455                         };
 456
 457                         gpio3: gpio@30220000 {
 458                                 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 459                                 reg = <0x30220000 0x10000>;
 460                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 461                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 462                                 clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
 463                                 gpio-controller;
 464                                 #gpio-cells = <2>;
 465                                 interrupt-controller;
 466                                 #interrupt-cells = <2>;
 467                                 gpio-ranges = <&iomuxc 0 61 26>;
 468                         };
 469
 470                         gpio4: gpio@30230000 {
 471                                 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 472                                 reg = <0x30230000 0x10000>;
 473                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 474                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 475                                 clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
 476                                 gpio-controller;
 477                                 #gpio-cells = <2>;
 478                                 interrupt-controller;
 479                                 #interrupt-cells = <2>;
 480                                 gpio-ranges = <&iomuxc 0 87 32>;
 481                         };
 482
 483                         gpio5: gpio@30240000 {
 484                                 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 485                                 reg = <0x30240000 0x10000>;
 486                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 487                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 488                                 clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
 489                                 gpio-controller;
 490                                 #gpio-cells = <2>;
 491                                 interrupt-controller;
 492                                 #interrupt-cells = <2>;
 493                                 gpio-ranges = <&iomuxc 0 119 30>;
 494                         };
 495
 496                         tmu: tmu@30260000 {
 497                                 compatible = "fsl,imx8mm-tmu";
 498                                 reg = <0x30260000 0x10000>;
 499                                 clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
 500                                 nvmem-cells = <&tmu_calib>;
 501                                 nvmem-cell-names = "calib";
 502                                 #thermal-sensor-cells = <0>;
 503                         };
 504
 505                         wdog1: watchdog@30280000 {
 506                                 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
 507                                 reg = <0x30280000 0x10000>;
 508                                 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 509                                 clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
 510                                 status = "disabled";
 511                         };
 512
 513                         wdog2: watchdog@30290000 {
 514                                 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
 515                                 reg = <0x30290000 0x10000>;
 516                                 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 517                                 clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
 518                                 status = "disabled";
 519                         };
 520
 521                         wdog3: watchdog@302a0000 {
 522                                 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
 523                                 reg = <0x302a0000 0x10000>;
 524                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 525                                 clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
 526                                 status = "disabled";
 527                         };
 528
 529                         sdma2: dma-controller@302c0000 {
 530                                 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 531                                 reg = <0x302c0000 0x10000>;
 532                                 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 533                                 clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
 534                                          <&clk IMX8MM_CLK_SDMA2_ROOT>;
 535                                 clock-names = "ipg", "ahb";
 536                                 #dma-cells = <3>;
 537                                 fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
 538                         };
 539
 540                         sdma3: dma-controller@302b0000 {
 541                                 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 542                                 reg = <0x302b0000 0x10000>;
 543                                 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 544                                 clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
 545                                  <&clk IMX8MM_CLK_SDMA3_ROOT>;
 546                                 clock-names = "ipg", "ahb";
 547                                 #dma-cells = <3>;
 548                                 fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
 549                         };
 550
 551                         iomuxc: pinctrl@30330000 {
 552                                 compatible = "fsl,imx8mm-iomuxc";
 553                                 reg = <0x30330000 0x10000>;
 554                         };
 555
 556                         gpr: syscon@30340000 {
 557                                 compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
 558                                 reg = <0x30340000 0x10000>;
 559                         };
 560
 561                         ocotp: efuse@30350000 {
 562                                 compatible = "fsl,imx8mm-ocotp", "syscon";
 563                                 reg = <0x30350000 0x10000>;
 564                                 clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
 565                                 /* For nvmem subnodes */
 566                                 #address-cells = <1>;
 567                                 #size-cells = <1>;
 568
 569                                 /*
 570                                  * The register address below maps to the MX8M
 571                                  * Fusemap Description Table entries this way.
 572                                  * Assuming
 573                                  *   reg = <ADDR SIZE>;
 574                                  * then
 575                                  *   Fuse Address = (ADDR * 4) + 0x400
 576                                  * Note that if SIZE is greater than 4, then
 577                                  * each subsequent fuse is located at offset
 578                                  * +0x10 in Fusemap Description Table (e.g.
 579                                  * reg = <0x4 0x8> describes fuses 0x410 and
 580                                  * 0x420).
 581                                  */
 582                                 imx8mm_uid: unique-id@4 { /* 0x410-0x420 */
 583                                         reg = <0x4 0x8>;
 584                                 };
 585
 586                                 cpu_speed_grade: speed-grade@10 { /* 0x440 */
 587                                         reg = <0x10 4>;
 588                                 };
 589
 590                                 tmu_calib: calib@3c { /* 0x4f0 */
 591                                         reg = <0x3c 4>;
 592                                 };
 593
 594                                 fec_mac_address: mac-address@90 { /* 0x640 */
 595                                         reg = <0x90 6>;
 596                                 };
 597                         };
 598
 599                         anatop: clock-controller@30360000 {
 600                                 compatible = "fsl,imx8mm-anatop";
 601                                 reg = <0x30360000 0x10000>;
 602                                 #clock-cells = <1>;
 603                         };
 604
 605                         snvs: snvs@30370000 {
 606                                 compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
 607                                 reg = <0x30370000 0x10000>;
 608
 609                                 snvs_rtc: snvs-rtc-lp {
 610                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 611                                         regmap = <&snvs>;
 612                                         offset = <0x34>;
 613                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 614                                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 615                                         clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
 616                                         clock-names = "snvs-rtc";
 617                                 };
 618
 619                                 snvs_pwrkey: snvs-powerkey {
 620                                         compatible = "fsl,sec-v4.0-pwrkey";
 621                                         regmap = <&snvs>;
 622                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 623                                         clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
 624                                         clock-names = "snvs-pwrkey";
 625                                         linux,keycode = <KEY_POWER>;
 626                                         wakeup-source;
 627                                         status = "disabled";
 628                                 };
 629
 630                                 snvs_lpgpr: snvs-lpgpr {
 631                                         compatible = "fsl,imx8mm-snvs-lpgpr",
 632                                                      "fsl,imx7d-snvs-lpgpr";
 633                                 };
 634                         };
 635
 636                         clk: clock-controller@30380000 {
 637                                 compatible = "fsl,imx8mm-ccm";
 638                                 reg = <0x30380000 0x10000>;
 639                                 #clock-cells = <1>;
 640                                 clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 641                                          <&clk_ext3>, <&clk_ext4>;
 642                                 clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
 643                                               "clk_ext3", "clk_ext4";
 644                                 assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
 645                                                 <&clk IMX8MM_CLK_A53_CORE>,
 646                                                 <&clk IMX8MM_CLK_NOC>,
 647                                                 <&clk IMX8MM_CLK_AUDIO_AHB>,
 648                                                 <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 649                                                 <&clk IMX8MM_SYS_PLL3>,
 650                                                 <&clk IMX8MM_VIDEO_PLL1>,
 651                                                 <&clk IMX8MM_AUDIO_PLL1>;
 652                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
 653                                                          <&clk IMX8MM_ARM_PLL_OUT>,
 654                                                          <&clk IMX8MM_SYS_PLL3_OUT>,
 655                                                          <&clk IMX8MM_SYS_PLL1_800M>;
 656                                 assigned-clock-rates = <0>, <0>, <0>,
 657                                                         <400000000>,
 658                                                         <400000000>,
 659                                                         <750000000>,
 660                                                         <594000000>,
 661                                                         <393216000>;
 662                         };
 663
 664                         src: reset-controller@30390000 {
 665                                 compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
 666                                 reg = <0x30390000 0x10000>;
 667                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 668                                 #reset-cells = <1>;
 669                         };
 670
 671                         gpc: gpc@303a0000 {
 672                                 compatible = "fsl,imx8mm-gpc";
 673                                 reg = <0x303a0000 0x10000>;
 674                                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 675                                 interrupt-parent = <&gic>;
 676                                 interrupt-controller;
 677                                 #interrupt-cells = <3>;
 678
 679                                 pgc {
 680                                         #address-cells = <1>;
 681                                         #size-cells = <0>;
 682
 683                                         pgc_hsiomix: power-domain@0 {
 684                                                 #power-domain-cells = <0>;
 685                                                 reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
 686                                                 clocks = <&clk IMX8MM_CLK_USB_BUS>;
 687                                                 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 688                                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 689                                         };
 690
 691                                         pgc_pcie: power-domain@1 {
 692                                                 #power-domain-cells = <0>;
 693                                                 reg = <IMX8MM_POWER_DOMAIN_PCIE>;
 694                                                 power-domains = <&pgc_hsiomix>;
 695                                                 clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
 696                                         };
 697
 698                                         pgc_otg1: power-domain@2 {
 699                                                 #power-domain-cells = <0>;
 700                                                 reg = <IMX8MM_POWER_DOMAIN_OTG1>;
 701                                         };
 702
 703                                         pgc_otg2: power-domain@3 {
 704                                                 #power-domain-cells = <0>;
 705                                                 reg = <IMX8MM_POWER_DOMAIN_OTG2>;
 706                                         };
 707
 708                                         pgc_gpumix: power-domain@4 {
 709                                                 #power-domain-cells = <0>;
 710                                                 reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
 711                                                 clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
 712                                                          <&clk IMX8MM_CLK_GPU_AHB>;
 713                                                 assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
 714                                                                   <&clk IMX8MM_CLK_GPU_AHB>;
 715                                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
 716                                                                          <&clk IMX8MM_SYS_PLL1_800M>;
 717                                                 assigned-clock-rates = <800000000>, <400000000>;
 718                                         };
 719
 720                                         pgc_gpu: power-domain@5 {
 721                                                 #power-domain-cells = <0>;
 722                                                 reg = <IMX8MM_POWER_DOMAIN_GPU>;
 723                                                 clocks = <&clk IMX8MM_CLK_GPU_AHB>,
 724                                                          <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
 725                                                          <&clk IMX8MM_CLK_GPU2D_ROOT>,
 726                                                          <&clk IMX8MM_CLK_GPU3D_ROOT>;
 727                                                 resets = <&src IMX8MQ_RESET_GPU_RESET>;
 728                                                 power-domains = <&pgc_gpumix>;
 729                                         };
 730
 731                                         pgc_vpumix: power-domain@6 {
 732                                                 #power-domain-cells = <0>;
 733                                                 reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
 734                                                 clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
 735                                                 assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
 736                                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
 737                                         };
 738
 739                                         pgc_vpu_g1: power-domain@7 {
 740                                                 #power-domain-cells = <0>;
 741                                                 reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
 742                                         };
 743
 744                                         pgc_vpu_g2: power-domain@8 {
 745                                                 #power-domain-cells = <0>;
 746                                                 reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
 747                                         };
 748
 749                                         pgc_vpu_h1: power-domain@9 {
 750                                                 #power-domain-cells = <0>;
 751                                                 reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
 752                                         };
 753
 754                                         pgc_dispmix: power-domain@10 {
 755                                                 #power-domain-cells = <0>;
 756                                                 reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
 757                                                 clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
 758                                                          <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
 759                                                 assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
 760                                                                   <&clk IMX8MM_CLK_DISP_APB>;
 761                                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
 762                                                                          <&clk IMX8MM_SYS_PLL1_800M>;
 763                                                 assigned-clock-rates = <500000000>, <200000000>;
 764                                         };
 765
 766                                         pgc_mipi: power-domain@11 {
 767                                                 #power-domain-cells = <0>;
 768                                                 reg = <IMX8MM_POWER_DOMAIN_MIPI>;
 769                                         };
 770                                 };
 771                         };
 772                 };
 773
 774                 aips2: bus@30400000 {
 775                         compatible = "fsl,aips-bus", "simple-bus";
 776                         reg = <0x30400000 0x400000>;
 777                         #address-cells = <1>;
 778                         #size-cells = <1>;
 779                         ranges = <0x30400000 0x30400000 0x400000>;
 780
 781                         pwm1: pwm@30660000 {
 782                                 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
 783                                 reg = <0x30660000 0x10000>;
 784                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 785                                 clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
 786                                         <&clk IMX8MM_CLK_PWM1_ROOT>;
 787                                 clock-names = "ipg", "per";
 788                                 #pwm-cells = <3>;
 789                                 status = "disabled";
 790                         };
 791
 792                         pwm2: pwm@30670000 {
 793                                 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
 794                                 reg = <0x30670000 0x10000>;
 795                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 796                                 clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
 797                                          <&clk IMX8MM_CLK_PWM2_ROOT>;
 798                                 clock-names = "ipg", "per";
 799                                 #pwm-cells = <3>;
 800                                 status = "disabled";
 801                         };
 802
 803                         pwm3: pwm@30680000 {
 804                                 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
 805                                 reg = <0x30680000 0x10000>;
 806                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 807                                 clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
 808                                          <&clk IMX8MM_CLK_PWM3_ROOT>;
 809                                 clock-names = "ipg", "per";
 810                                 #pwm-cells = <3>;
 811                                 status = "disabled";
 812                         };
 813
 814                         pwm4: pwm@30690000 {
 815                                 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
 816                                 reg = <0x30690000 0x10000>;
 817                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 818                                 clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
 819                                          <&clk IMX8MM_CLK_PWM4_ROOT>;
 820                                 clock-names = "ipg", "per";
 821                                 #pwm-cells = <3>;
 822                                 status = "disabled";
 823                         };
 824
 825                         system_counter: timer@306a0000 {
 826                                 compatible = "nxp,sysctr-timer";
 827                                 reg = <0x306a0000 0x20000>;
 828                                 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 829                                 clocks = <&osc_24m>;
 830                                 clock-names = "per";
 831                         };
 832                 };
 833
 834                 aips3: bus@30800000 {
 835                         compatible = "fsl,aips-bus", "simple-bus";
 836                         reg = <0x30800000 0x400000>;
 837                         #address-cells = <1>;
 838                         #size-cells = <1>;
 839                         ranges = <0x30800000 0x30800000 0x400000>,
 840                                  <0x8000000 0x8000000 0x10000000>;
 841
 842                         spba1: spba-bus@30800000 {
 843                                 compatible = "fsl,spba-bus", "simple-bus";
 844                                 #address-cells = <1>;
 845                                 #size-cells = <1>;
 846                                 reg = <0x30800000 0x100000>;
 847                                 ranges;
 848
 849                                 ecspi1: spi@30820000 {
 850                                         compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
 851                                         #address-cells = <1>;
 852                                         #size-cells = <0>;
 853                                         reg = <0x30820000 0x10000>;
 854                                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 855                                         clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
 856                                                  <&clk IMX8MM_CLK_ECSPI1_ROOT>;
 857                                         clock-names = "ipg", "per";
 858                                         dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
 859                                         dma-names = "rx", "tx";
 860                                         status = "disabled";
 861                                 };
 862
 863                                 ecspi2: spi@30830000 {
 864                                         compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
 865                                         #address-cells = <1>;
 866                                         #size-cells = <0>;
 867                                         reg = <0x30830000 0x10000>;
 868                                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 869                                         clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
 870                                                  <&clk IMX8MM_CLK_ECSPI2_ROOT>;
 871                                         clock-names = "ipg", "per";
 872                                         dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
 873                                         dma-names = "rx", "tx";
 874                                         status = "disabled";
 875                                 };
 876
 877                                 ecspi3: spi@30840000 {
 878                                         compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
 879                                         #address-cells = <1>;
 880                                         #size-cells = <0>;
 881                                         reg = <0x30840000 0x10000>;
 882                                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 883                                         clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
 884                                                  <&clk IMX8MM_CLK_ECSPI3_ROOT>;
 885                                         clock-names = "ipg", "per";
 886                                         dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
 887                                         dma-names = "rx", "tx";
 888                                         status = "disabled";
 889                                 };
 890
 891                                 uart1: serial@30860000 {
 892                                         compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
 893                                         reg = <0x30860000 0x10000>;
 894                                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 895                                         clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
 896                                                  <&clk IMX8MM_CLK_UART1_ROOT>;
 897                                         clock-names = "ipg", "per";
 898                                         dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
 899                                         dma-names = "rx", "tx";
 900                                         status = "disabled";
 901                                 };
 902
 903                                 uart3: serial@30880000 {
 904                                         compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
 905                                         reg = <0x30880000 0x10000>;
 906                                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 907                                         clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
 908                                                  <&clk IMX8MM_CLK_UART3_ROOT>;
 909                                         clock-names = "ipg", "per";
 910                                         dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
 911                                         dma-names = "rx", "tx";
 912                                         status = "disabled";
 913                                 };
 914
 915                                 uart2: serial@30890000 {
 916                                         compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
 917                                         reg = <0x30890000 0x10000>;
 918                                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 919                                         clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
 920                                                  <&clk IMX8MM_CLK_UART2_ROOT>;
 921                                         clock-names = "ipg", "per";
 922                                         status = "disabled";
 923                                 };
 924                         };
 925
 926                         crypto: crypto@30900000 {
 927                                 compatible = "fsl,sec-v4.0";
 928                                 #address-cells = <1>;
 929                                 #size-cells = <1>;
 930                                 reg = <0x30900000 0x40000>;
 931                                 ranges = <0 0x30900000 0x40000>;
 932                                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 933                                 clocks = <&clk IMX8MM_CLK_AHB>,
 934                                          <&clk IMX8MM_CLK_IPG_ROOT>;
 935                                 clock-names = "aclk", "ipg";
 936
 937                                 sec_jr0: jr@1000 {
 938                                         compatible = "fsl,sec-v4.0-job-ring";
 939                                         reg = <0x1000 0x1000>;
 940                                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 941                                         status = "disabled";
 942                                 };
 943
 944                                 sec_jr1: jr@2000 {
 945                                         compatible = "fsl,sec-v4.0-job-ring";
 946                                         reg = <0x2000 0x1000>;
 947                                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 948                                 };
 949
 950                                 sec_jr2: jr@3000 {
 951                                         compatible = "fsl,sec-v4.0-job-ring";
 952                                         reg = <0x3000 0x1000>;
 953                                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 954                                 };
 955                         };
 956
 957                         i2c1: i2c@30a20000 {
 958                                 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 959                                 #address-cells = <1>;
 960                                 #size-cells = <0>;
 961                                 reg = <0x30a20000 0x10000>;
 962                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 963                                 clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
 964                                 status = "disabled";
 965                         };
 966
 967                         i2c2: i2c@30a30000 {
 968                                 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 969                                 #address-cells = <1>;
 970                                 #size-cells = <0>;
 971                                 reg = <0x30a30000 0x10000>;
 972                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 973                                 clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
 974                                 status = "disabled";
 975                         };
 976
 977                         i2c3: i2c@30a40000 {
 978                                 #address-cells = <1>;
 979                                 #size-cells = <0>;
 980                                 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 981                                 reg = <0x30a40000 0x10000>;
 982                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 983                                 clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
 984                                 status = "disabled";
 985                         };
 986
 987                         i2c4: i2c@30a50000 {
 988                                 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 989                                 #address-cells = <1>;
 990                                 #size-cells = <0>;
 991                                 reg = <0x30a50000 0x10000>;
 992                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 993                                 clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
 994                                 status = "disabled";
 995                         };
 996
 997                         uart4: serial@30a60000 {
 998                                 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
 999                                 reg = <0x30a60000 0x10000>;
1000                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1001                                 clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
1002                                          <&clk IMX8MM_CLK_UART4_ROOT>;
1003                                 clock-names = "ipg", "per";
1004                                 dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
1005                                 dma-names = "rx", "tx";
1006                                 status = "disabled";
1007                         };
1008
1009                         mu: mailbox@30aa0000 {
1010                                 compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
1011                                 reg = <0x30aa0000 0x10000>;
1012                                 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
1013                                 clocks = <&clk IMX8MM_CLK_MU_ROOT>;
1014                                 #mbox-cells = <2>;
1015                         };
1016
1017                         usdhc1: mmc@30b40000 {
1018                                 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
1019                                 reg = <0x30b40000 0x10000>;
1020                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
1021                                 clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1022                                          <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1023                                          <&clk IMX8MM_CLK_USDHC1_ROOT>;
1024                                 clock-names = "ipg", "ahb", "per";
1025                                 fsl,tuning-start-tap = <20>;
1026                                 fsl,tuning-step = <2>;
1027                                 bus-width = <4>;
1028                                 status = "disabled";
1029                         };
1030
1031                         usdhc2: mmc@30b50000 {
1032                                 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
1033                                 reg = <0x30b50000 0x10000>;
1034                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1035                                 clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1036                                          <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1037                                          <&clk IMX8MM_CLK_USDHC2_ROOT>;
1038                                 clock-names = "ipg", "ahb", "per";
1039                                 fsl,tuning-start-tap = <20>;
1040                                 fsl,tuning-step = <2>;
1041                                 bus-width = <4>;
1042                                 status = "disabled";
1043                         };
1044
1045                         usdhc3: mmc@30b60000 {
1046                                 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
1047                                 reg = <0x30b60000 0x10000>;
1048                                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
1049                                 clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1050                                          <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1051                                          <&clk IMX8MM_CLK_USDHC3_ROOT>;
1052                                 clock-names = "ipg", "ahb", "per";
1053                                 fsl,tuning-start-tap = <20>;
1054                                 fsl,tuning-step = <2>;
1055                                 bus-width = <4>;
1056                                 status = "disabled";
1057                         };
1058
1059                         flexspi: spi@30bb0000 {
1060                                 #address-cells = <1>;
1061                                 #size-cells = <0>;
1062                                 compatible = "nxp,imx8mm-fspi";
1063                                 reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
1064                                 reg-names = "fspi_base", "fspi_mmap";
1065                                 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1066                                 clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
1067                                          <&clk IMX8MM_CLK_QSPI_ROOT>;
1068                                 clock-names = "fspi_en", "fspi";
1069                                 status = "disabled";
1070                         };
1071
1072                         sdma1: dma-controller@30bd0000 {
1073                                 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
1074                                 reg = <0x30bd0000 0x10000>;
1075                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1076                                 clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
1077                                          <&clk IMX8MM_CLK_AHB>;
1078                                 clock-names = "ipg", "ahb";
1079                                 #dma-cells = <3>;
1080                                 fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
1081                         };
1082
1083                         fec1: ethernet@30be0000 {
1084                                 compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
1085                                 reg = <0x30be0000 0x10000>;
1086                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1087                                              <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1088                                              <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1089                                              <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1090                                 clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
1091                                          <&clk IMX8MM_CLK_ENET1_ROOT>,
1092                                          <&clk IMX8MM_CLK_ENET_TIMER>,
1093                                          <&clk IMX8MM_CLK_ENET_REF>,
1094                                          <&clk IMX8MM_CLK_ENET_PHY_REF>;
1095                                 clock-names = "ipg", "ahb", "ptp",
1096                                               "enet_clk_ref", "enet_out";
1097                                 assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
1098                                                   <&clk IMX8MM_CLK_ENET_TIMER>,
1099                                                   <&clk IMX8MM_CLK_ENET_REF>,
1100                                                   <&clk IMX8MM_CLK_ENET_PHY_REF>;
1101                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
1102                                                          <&clk IMX8MM_SYS_PLL2_100M>,
1103                                                          <&clk IMX8MM_SYS_PLL2_125M>,
1104                                                          <&clk IMX8MM_SYS_PLL2_50M>;
1105                                 assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
1106                                 fsl,num-tx-queues = <3>;
1107                                 fsl,num-rx-queues = <3>;
1108                                 nvmem-cells = <&fec_mac_address>;
1109                                 nvmem-cell-names = "mac-address";
1110                                 fsl,stop-mode = <&gpr 0x10 3>;
1111                                 status = "disabled";
1112                         };
1113
1114                 };
1115
1116                 aips4: bus@32c00000 {
1117                         compatible = "fsl,aips-bus", "simple-bus";
1118                         reg = <0x32c00000 0x400000>;
1119                         #address-cells = <1>;
1120                         #size-cells = <1>;
1121                         ranges = <0x32c00000 0x32c00000 0x400000>;
1122
1123                         lcdif: lcdif@32e00000 {
1124                                 compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif";
1125                                 reg = <0x32e00000 0x10000>;
1126                                 clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
1127                                          <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1128                                          <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
1129                                 clock-names = "pix", "axi", "disp_axi";
1130                                 assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
1131                                                   <&clk IMX8MM_CLK_DISP_AXI>,
1132                                                   <&clk IMX8MM_CLK_DISP_APB>;
1133                                 assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
1134                                                          <&clk IMX8MM_SYS_PLL2_1000M>,
1135                                                          <&clk IMX8MM_SYS_PLL1_800M>;
1136                                 assigned-clock-rates = <594000000>, <500000000>, <200000000>;
1137                                 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1138                                 power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
1139                                 status = "disabled";
1140
1141                                 port {
1142                                         lcdif_to_dsim: endpoint {
1143                                                 remote-endpoint = <&dsim_from_lcdif>;
1144                                         };
1145                                 };
1146                         };
1147
1148                         mipi_dsi: dsi@32e10000 {
1149                                 compatible = "fsl,imx8mm-mipi-dsim";
1150                                 reg = <0x32e10000 0x400>;
1151                                 clocks = <&clk IMX8MM_CLK_DSI_CORE>,
1152                                          <&clk IMX8MM_CLK_DSI_PHY_REF>;
1153                                 clock-names = "bus_clk", "sclk_mipi";
1154                                 assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
1155                                                   <&clk IMX8MM_CLK_DSI_PHY_REF>;
1156                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
1157                                                          <&clk IMX8MM_CLK_24M>;
1158                                 assigned-clock-rates = <266000000>, <24000000>;
1159                                 samsung,pll-clock-frequency = <24000000>;
1160                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1161                                 power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
1162                                 status = "disabled";
1163
1164                                 ports {
1165                                         #address-cells = <1>;
1166                                         #size-cells = <0>;
1167
1168                                         port@0 {
1169                                                 reg = <0>;
1170
1171                                                 dsim_from_lcdif: endpoint {
1172                                                         remote-endpoint = <&lcdif_to_dsim>;
1173                                                 };
1174                                         };
1175                                 };
1176                         };
1177
1178                         csi: csi@32e20000 {
1179                                 compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
1180                                 reg = <0x32e20000 0x1000>;
1181                                 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
1182                                 clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
1183                                 clock-names = "mclk";
1184                                 power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
1185                                 status = "disabled";
1186
1187                                 port {
1188                                         csi_in: endpoint {
1189                                                 remote-endpoint = <&imx8mm_mipi_csi_out>;
1190                                         };
1191                                 };
1192                         };
1193
1194                         disp_blk_ctrl: blk-ctrl@32e28000 {
1195                                 compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
1196                                 reg = <0x32e28000 0x100>;
1197                                 power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
1198                                                 <&pgc_dispmix>, <&pgc_mipi>,
1199                                                 <&pgc_mipi>;
1200                                 power-domain-names = "bus", "csi-bridge",
1201                                                      "lcdif", "mipi-dsi",
1202                                                      "mipi-csi";
1203                                 clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
1204                                          <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1205                                          <&clk IMX8MM_CLK_CSI1_ROOT>,
1206                                          <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
1207                                          <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1208                                          <&clk IMX8MM_CLK_DISP_ROOT>,
1209                                          <&clk IMX8MM_CLK_DSI_CORE>,
1210                                          <&clk IMX8MM_CLK_DSI_PHY_REF>,
1211                                          <&clk IMX8MM_CLK_CSI1_CORE>,
1212                                          <&clk IMX8MM_CLK_CSI1_PHY_REF>;
1213                                 clock-names = "csi-bridge-axi","csi-bridge-apb",
1214                                               "csi-bridge-core", "lcdif-axi",
1215                                               "lcdif-apb", "lcdif-pix",
1216                                               "dsi-pclk", "dsi-ref",
1217                                               "csi-aclk", "csi-pclk";
1218                                 #power-domain-cells = <1>;
1219                         };
1220
1221                         mipi_csi: mipi-csi@32e30000 {
1222                                 compatible = "fsl,imx8mm-mipi-csi2";
1223                                 reg = <0x32e30000 0x1000>;
1224                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1225                                 assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
1226                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>;
1227
1228                                 clock-frequency = <333000000>;
1229                                 clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1230                                          <&clk IMX8MM_CLK_CSI1_ROOT>,
1231                                          <&clk IMX8MM_CLK_CSI1_PHY_REF>,
1232                                          <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
1233                                 clock-names = "pclk", "wrap", "phy", "axi";
1234                                 power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
1235                                 status = "disabled";
1236
1237                                 ports {
1238                                         #address-cells = <1>;
1239                                         #size-cells = <0>;
1240
1241                                         port@0 {
1242                                                 reg = <0>;
1243                                         };
1244
1245                                         port@1 {
1246                                                 reg = <1>;
1247
1248                                                 imx8mm_mipi_csi_out: endpoint {
1249                                                         remote-endpoint = <&csi_in>;
1250                                                 };
1251                                         };
1252                                 };
1253                         };
1254
1255                         usbotg1: usb@32e40000 {
1256                                 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
1257                                 reg = <0x32e40000 0x200>;
1258                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1259                                 clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
1260                                 clock-names = "usb1_ctrl_root_clk";
1261                                 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
1262                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
1263                                 phys = <&usbphynop1>;
1264                                 fsl,usbmisc = <&usbmisc1 0>;
1265                                 power-domains = <&pgc_hsiomix>;
1266                                 status = "disabled";
1267                         };
1268
1269                         usbmisc1: usbmisc@32e40200 {
1270                                 compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
1271                                              "fsl,imx6q-usbmisc";
1272                                 #index-cells = <1>;
1273                                 reg = <0x32e40200 0x200>;
1274                         };
1275
1276                         usbotg2: usb@32e50000 {
1277                                 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
1278                                 reg = <0x32e50000 0x200>;
1279                                 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1280                                 clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
1281                                 clock-names = "usb1_ctrl_root_clk";
1282                                 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
1283                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
1284                                 phys = <&usbphynop2>;
1285                                 fsl,usbmisc = <&usbmisc2 0>;
1286                                 power-domains = <&pgc_hsiomix>;
1287                                 status = "disabled";
1288                         };
1289
1290                         usbmisc2: usbmisc@32e50200 {
1291                                 compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
1292                                              "fsl,imx6q-usbmisc";
1293                                 #index-cells = <1>;
1294                                 reg = <0x32e50200 0x200>;
1295                         };
1296
1297                         pcie_phy: pcie-phy@32f00000 {
1298                                 compatible = "fsl,imx8mm-pcie-phy";
1299                                 reg = <0x32f00000 0x10000>;
1300                                 clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
1301                                 clock-names = "ref";
1302                                 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
1303                                 assigned-clock-rates = <100000000>;
1304                                 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
1305                                 resets = <&src IMX8MQ_RESET_PCIEPHY>;
1306                                 reset-names = "pciephy";
1307                                 #phy-cells = <0>;
1308                                 status = "disabled";
1309                         };
1310                 };
1311
1312                 dma_apbh: dma-controller@33000000 {
1313                         compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
1314                         reg = <0x33000000 0x2000>;
1315                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1316                                      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1317                                      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1318                                      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1319                         #dma-cells = <1>;
1320                         dma-channels = <4>;
1321                         clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1322                 };
1323
1324                 gpmi: nand-controller@33002000 {
1325                         compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
1326                         #address-cells = <1>;
1327                         #size-cells = <0>;
1328                         reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
1329                         reg-names = "gpmi-nand", "bch";
1330                         interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1331                         interrupt-names = "bch";
1332                         clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
1333                                  <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1334                         clock-names = "gpmi_io", "gpmi_bch_apb";
1335                         dmas = <&dma_apbh 0>;
1336                         dma-names = "rx-tx";
1337                         status = "disabled";
1338                 };
1339
1340                 pcie0: pcie@33800000 {
1341                         compatible = "fsl,imx8mm-pcie";
1342                         reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
1343                         reg-names = "dbi", "config";
1344                         #address-cells = <3>;
1345                         #size-cells = <2>;
1346                         device_type = "pci";
1347                         bus-range = <0x00 0xff>;
1348                         ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
1349                                  <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
1350                         num-lanes = <1>;
1351                         num-viewport = <4>;
1352                         interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1353                         interrupt-names = "msi";
1354                         #interrupt-cells = <1>;
1355                         interrupt-map-mask = <0 0 0 0x7>;
1356                         interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1357                                         <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
1358                                         <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1359                                         <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1360                         fsl,max-link-speed = <2>;
1361                         linux,pci-domain = <0>;
1362                         clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
1363                                  <&clk IMX8MM_CLK_PCIE1_PHY>,
1364                                  <&clk IMX8MM_CLK_PCIE1_AUX>;
1365                         clock-names = "pcie", "pcie_bus", "pcie_aux";
1366                         power-domains = <&pgc_pcie>;
1367                         resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
1368                                  <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
1369                         reset-names = "apps", "turnoff";
1370                         phys = <&pcie_phy>;
1371                         phy-names = "pcie-phy";
1372                         status = "disabled";
1373                 };
1374
1375                 pcie0_ep: pcie-ep@33800000 {
1376                         compatible = "fsl,imx8mm-pcie-ep";
1377                         reg = <0x33800000 0x400000>,
1378                               <0x18000000 0x8000000>;
1379                         reg-names = "dbi", "addr_space";
1380                         num-lanes = <1>;
1381                         interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
1382                         interrupt-names = "dma";
1383                         fsl,max-link-speed = <2>;
1384                         clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
1385                                  <&clk IMX8MM_CLK_PCIE1_PHY>,
1386                                  <&clk IMX8MM_CLK_PCIE1_AUX>;
1387                         clock-names = "pcie", "pcie_bus", "pcie_aux";
1388                         power-domains = <&pgc_pcie>;
1389                         resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
1390                                  <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
1391                         reset-names = "apps", "turnoff";
1392                         phys = <&pcie_phy>;
1393                         phy-names = "pcie-phy";
1394                         num-ib-windows = <4>;
1395                         num-ob-windows = <4>;
1396                         status = "disabled";
1397                 };
1398
1399                 gpu_3d: gpu@38000000 {
1400                         compatible = "vivante,gc";
1401                         reg = <0x38000000 0x8000>;
1402                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
1403                         clocks = <&clk IMX8MM_CLK_GPU_AHB>,
1404                                  <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
1405                                  <&clk IMX8MM_CLK_GPU3D_ROOT>,
1406                                  <&clk IMX8MM_CLK_GPU3D_ROOT>;
1407                         clock-names = "reg", "bus", "core", "shader";
1408                         assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
1409                                           <&clk IMX8MM_GPU_PLL_OUT>;
1410                         assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
1411                         assigned-clock-rates = <0>, <1000000000>;
1412                         power-domains = <&pgc_gpu>;
1413                 };
1414
1415                 gpu_2d: gpu@38008000 {
1416                         compatible = "vivante,gc";
1417                         reg = <0x38008000 0x8000>;
1418                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
1419                         clocks = <&clk IMX8MM_CLK_GPU_AHB>,
1420                                  <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
1421                                  <&clk IMX8MM_CLK_GPU2D_ROOT>;
1422                         clock-names = "reg", "bus", "core";
1423                         assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
1424                                           <&clk IMX8MM_GPU_PLL_OUT>;
1425                         assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
1426                         assigned-clock-rates = <0>, <1000000000>;
1427                         power-domains = <&pgc_gpu>;
1428                 };
1429
1430                 vpu_g1: video-codec@38300000 {
1431                         compatible = "nxp,imx8mm-vpu-g1";
1432                         reg = <0x38300000 0x10000>;
1433                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1434                         clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
1435                         power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
1436                 };
1437
1438                 vpu_g2: video-codec@38310000 {
1439                         compatible = "nxp,imx8mq-vpu-g2";
1440                         reg = <0x38310000 0x10000>;
1441                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1442                         clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
1443                         power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
1444                 };
1445
1446                 vpu_blk_ctrl: blk-ctrl@38330000 {
1447                         compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
1448                         reg = <0x38330000 0x100>;
1449                         power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
1450                                         <&pgc_vpu_g2>, <&pgc_vpu_h1>;
1451                         power-domain-names = "bus", "g1", "g2", "h1";
1452                         clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
1453                                  <&clk IMX8MM_CLK_VPU_G2_ROOT>,
1454                                  <&clk IMX8MM_CLK_VPU_H1_ROOT>;
1455                         clock-names = "g1", "g2", "h1";
1456                         assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
1457                                           <&clk IMX8MM_CLK_VPU_G2>;
1458                         assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
1459                                                  <&clk IMX8MM_VPU_PLL_OUT>;
1460                         assigned-clock-rates = <600000000>,
1461                                                <600000000>;
1462                         #power-domain-cells = <1>;
1463                 };
1464
1465                 gic: interrupt-controller@38800000 {
1466                         compatible = "arm,gic-v3";
1467                         reg = <0x38800000 0x10000>, /* GIC Dist */
1468                               <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
1469                         #interrupt-cells = <3>;
1470                         interrupt-controller;
1471                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1472                 };
1473
1474                 ddrc: memory-controller@3d400000 {
1475                         compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
1476                         reg = <0x3d400000 0x400000>;
1477                         clock-names = "core", "pll", "alt", "apb";
1478                         clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
1479                                  <&clk IMX8MM_DRAM_PLL>,
1480                                  <&clk IMX8MM_CLK_DRAM_ALT>,
1481                                  <&clk IMX8MM_CLK_DRAM_APB>;
1482                 };
1483
1484                 ddr-pmu@3d800000 {
1485                         compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
1486                         reg = <0x3d800000 0x400000>;
1487                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1488                 };
1489         };
1490 };