arch/arm64/boot/dts/freescale/imx8mm-phg.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright 2022 Fabio Estevam <festevam@denx.de>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "imx8mm-tqma8mqml.dtsi"
   9
  10 / {
  11         model = "Cloos i.MX8MM PHG board";
  12         compatible = "cloos,imx8mm-phg", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
  13
  14         aliases {
  15                 mmc0 = &usdhc3;
  16                 mmc1 = &usdhc2;
  17         };
  18
  19         chosen {
  20                 stdout-path = &uart2;
  21         };
  22
  23         beeper {
  24                 compatible = "gpio-beeper";
  25                 pinctrl-0 = <&pinctrl_beeper>;
  26                 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
  27         };
  28
  29         leds {
  30                 compatible = "gpio-leds";
  31                 pinctrl-names = "default";
  32                 pinctrl-0 = <&pinctrl_gpio_led>;
  33
  34                 led-0 {
  35                         label = "status1";
  36                         gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
  37                 };
  38
  39                 led-1 {
  40                         label = "status2";
  41                         gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
  42                 };
  43
  44                 led-2 {
  45                         label = "status3";
  46                         gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
  47                 };
  48
  49                 led-3 {
  50                         label = "run";
  51                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
  52                 };
  53
  54                 led-4 {
  55                         label = "powerled";
  56                         gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
  57                 };
  58         };
  59
  60         reg_usb_otg_vbus: regulator-usb-otg-vbus {
  61                 compatible = "regulator-fixed";
  62                 pinctrl-names = "default";
  63                 pinctrl-0 = <&pinctrl_otg_vbus_ctrl>;
  64                 regulator-name = "usb_otg_vbus";
  65                 regulator-min-microvolt = <5000000>;
  66                 regulator-max-microvolt = <5000000>;
  67                 gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
  68                 enable-active-high;
  69         };
  70
  71         reg_usdhc2_vmmc: regulator-vmmc {
  72                 compatible = "regulator-fixed";
  73                 pinctrl-names = "default";
  74                 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
  75                 regulator-name = "VSD_3V3";
  76                 regulator-min-microvolt = <3300000>;
  77                 regulator-max-microvolt = <3300000>;
  78                 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
  79                 enable-active-high;
  80                 startup-delay-us = <100>;
  81                 off-on-delay-us = <12000>;
  82         };
  83
  84         panel {
  85                 compatible = "panel-lvds";
  86                 width-mm = <170>;
  87                 height-mm = <28>;
  88                 data-mapping = "jeida-18";
  89
  90                 panel-timing {
  91                         clock-frequency = <49500000>;
  92                         hactive = <800>;
  93                         hback-porch = <48>;
  94                         hfront-porch = <312>;
  95                         hsync-len = <40>;
  96                         vactive = <600>;
  97                         vback-porch = <19>;
  98                         vfront-porch = <61>;
  99                         vsync-len = <20>;
 100                         hsync-active = <0>;
 101                         vsync-active = <0>;
 102                         de-active = <1>;
 103                         pixelclk-active = <1>;
 104                 };
 105
 106                 port {
 107                         panel_out_bridge: endpoint {
 108                                 remote-endpoint = <&bridge_out_panel>;
 109                         };
 110                 };
 111         };
 112 };
 113
 114 /* QSPI is not populated on the SoM */
 115 &flexspi {
 116         status = "disabled";
 117 };
 118
 119 &ecspi1 {
 120         pinctrl-names = "default";
 121         pinctrl-0 = <&pinctrl_ecspi1>;
 122         cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 123         status = "okay";
 124 };
 125
 126 &fec1 {
 127         pinctrl-names = "default";
 128         pinctrl-0 = <&pinctrl_fec1>;
 129         phy-mode = "rgmii-id";
 130         phy-handle = <&ethphy0>;
 131         fsl,magic-packet;
 132         status = "okay";
 133
 134         mdio {
 135                 #address-cells = <1>;
 136                 #size-cells = <0>;
 137
 138                 ethphy0: ethernet-phy@0 {
 139                         reg = <0>;
 140                         compatible = "ethernet-phy-ieee802.3-c22";
 141                 };
 142         };
 143 };
 144
 145 &i2c2 {
 146         clock-frequency = <100000>;
 147         pinctrl-names = "default";
 148         pinctrl-0 = <&pinctrl_i2c2>;
 149         status = "okay";
 150
 151         bridge@2c {
 152                 compatible = "ti,sn65dsi83";
 153                 reg = <0x2c>;
 154                 enable-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 155                 pinctrl-names = "default";
 156                 pinctrl-0 = <&pinctrl_dsi_bridge>;
 157
 158                 ports {
 159                         #address-cells = <1>;
 160                         #size-cells = <0>;
 161
 162                         port@0 {
 163                                 reg = <0>;
 164
 165                                 bridge_in_dsi: endpoint {
 166                                         remote-endpoint = <&dsi_out_bridge>;
 167                                         data-lanes = <1 2 3 4>;
 168                                 };
 169                         };
 170
 171                         port@2 {
 172                                 reg = <2>;
 173
 174                                 bridge_out_panel: endpoint {
 175                                         remote-endpoint = <&panel_out_bridge>;
 176                                 };
 177                         };
 178                 };
 179         };
 180 };
 181
 182 &lcdif {
 183         status = "okay";
 184 };
 185
 186 &mipi_dsi {
 187         samsung,esc-clock-frequency = <10000000>;
 188         status = "okay";
 189
 190         ports {
 191                 port@1 {
 192                         reg = <1>;
 193
 194                         dsi_out_bridge: endpoint {
 195                                 data-lanes = <1 2>;
 196                                 lane-polarities = <1 0 0 0 0>;
 197                                 remote-endpoint = <&bridge_in_dsi>;
 198                         };
 199                 };
 200         };
 201 };
 202
 203
 204 &uart2 {
 205         pinctrl-names = "default";
 206         pinctrl-0 = <&pinctrl_uart2>;
 207         status = "okay";
 208 };
 209
 210 &usbphynop1 {
 211         power-domains = <&pgc_otg1>;
 212 };
 213
 214 &usbphynop2 {
 215         power-domains = <&pgc_otg2>;
 216 };
 217
 218 &usbotg1 {
 219         dr_mode = "host";
 220         vbus-supply = <&reg_usb_otg_vbus>;
 221         status = "okay";
 222 };
 223
 224 &usbotg2 {
 225         dr_mode = "host";
 226         status = "okay";
 227 };
 228
 229 &usdhc2 {
 230         assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
 231         assigned-clock-rates = <400000000>;
 232         assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
 233         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 234         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 235         pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 236         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 237         bus-width = <4>;
 238         cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 239         disable-wp;
 240         no-mmc;
 241         no-sdio;
 242         sd-uhs-sdr104;
 243         sd-uhs-ddr50;
 244         vmmc-supply = <&reg_usdhc2_vmmc>;
 245         status = "okay";
 246 };
 247
 248 &iomuxc {
 249         pinctrl_beeper: beepergrp {
 250                 fsl,pins = <
 251                         MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0               0x19
 252                 >;
 253         };
 254
 255         pinctrl_dsi_bridge: dsibridgeggrp {
 256                 fsl,pins = <
 257                         MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3                0x19
 258                 >;
 259         };
 260
 261         pinctrl_ecspi1: ecspi1grp {
 262                 fsl,pins = <
 263                         MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO            0x82
 264                         MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI            0x82
 265                         MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK            0x82
 266                         MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9               0x19
 267                 >;
 268         };
 269
 270         pinctrl_fec1: fec1grp {
 271                 fsl,pins = <
 272                         MX8MM_IOMUXC_ENET_MDC_ENET1_MDC         0x40000002
 273                         MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO               0x40000002
 274                         MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3           0x14
 275                         MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2           0x14
 276                         MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1           0x14
 277                         MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0           0x14
 278                         MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3           0x90
 279                         MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2           0x90
 280                         MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1           0x90
 281                         MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0           0x90
 282                         MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC           0x14
 283                         MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC           0x90
 284                         MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x90
 285                         MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x14
 286                         MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                0x10
 287                 >;
 288         };
 289
 290         pinctrl_gpio_led: gpioledgrp {
 291                 fsl,pins = <
 292                         MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10              0x19
 293                         MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3               0x19
 294                         MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6               0x19
 295                         MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7               0x19
 296                         MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1               0x19
 297                 >;
 298         };
 299
 300         pinctrl_i2c2: i2c2grp {
 301                 fsl,pins = <
 302                         MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL          0x400001c3
 303                         MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA          0x400001c3
 304                 >;
 305         };
 306
 307         pinctrl_otg_vbus_ctrl: otgvbusctrlgrp {
 308                 fsl,pins = <
 309                         MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                0x119
 310                 >;
 311         };
 312
 313         pinctrl_uart2: uart2grp {
 314                 fsl,pins = <
 315                         MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX             0x140
 316                         MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX             0x140
 317                 >;
 318         };
 319
 320         pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
 321                 fsl,pins = <
 322                         MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12                0x1c4
 323                 >;
 324         };
 325
 326         pinctrl_usdhc2: usdhc2grp {
 327                 fsl,pins = <
 328                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x190
 329                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d0
 330                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0             0x1d0
 331                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1             0x1d0
 332                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2             0x1d0
 333                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3             0x1d0
 334                 >;
 335         };
 336
 337         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 338                 fsl,pins = <
 339                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x194
 340                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d4
 341                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0             0x1d4
 342                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1             0x1d4
 343                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2             0x1d4
 344                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3             0x1d4
 345                 >;
 346         };
 347
 348         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 349                 fsl,pins = <
 350                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x196
 351                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d6
 352                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0             0x1d6
 353                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1             0x1d6
 354                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2             0x1d6
 355                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3             0x1d6
 356                 >;
 357         };
 358 };