arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2019~2020, 2022 NXP
   4  */
   5
   6 /delete-node/ &enet1_lpcg;
   7 /delete-node/ &fec2;
   8
   9 / {
  10         conn_enet0_root_clk: clock-conn-enet0-root {
  11                 compatible = "fixed-clock";
  12                 #clock-cells = <0>;
  13                 clock-frequency = <250000000>;
  14                 clock-output-names = "conn_enet0_root_clk";
  15         };
  16 };
  17
  18 &conn_subsys {
  19         eqos: ethernet@5b050000 {
  20                 compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
  21                 reg = <0x5b050000 0x10000>;
  22                 interrupt-parent = <&gic>;
  23                 interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
  24                              <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
  25                 interrupt-names = "eth_wake_irq", "macirq";
  26                 clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
  27                          <&eqos_lpcg IMX_LPCG_CLK_6>,
  28                          <&eqos_lpcg IMX_LPCG_CLK_0>,
  29                          <&eqos_lpcg IMX_LPCG_CLK_5>,
  30                          <&eqos_lpcg IMX_LPCG_CLK_2>;
  31                 clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
  32                 assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
  33                 assigned-clock-rates = <125000000>;
  34                 power-domains = <&pd IMX_SC_R_ENET_1>;
  35                 status = "disabled";
  36         };
  37
  38         usbotg2: usb@5b0e0000 {
  39                 compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
  40                 reg = <0x5b0e0000 0x200>;
  41                 interrupt-parent = <&gic>;
  42                 interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
  43                 fsl,usbphy = <&usbphy2>;
  44                 fsl,usbmisc = <&usbmisc2 0>;
  45                 /*
  46                  * usbotg1 and usbotg2 share one clcok.
  47                  * scu firmware disables the access to the clock and keeps
  48                  * it always on in case other core (M4) uses one of these.
  49                  */
  50                 clocks = <&clk_dummy>;
  51                 ahb-burst-config = <0x0>;
  52                 tx-burst-size-dword = <0x10>;
  53                 rx-burst-size-dword = <0x10>;
  54                 power-domains = <&pd IMX_SC_R_USB_1>;
  55                 status = "disabled";
  56
  57                 clk_dummy: clock-dummy {
  58                         compatible = "fixed-clock";
  59                         #clock-cells = <0>;
  60                         clock-frequency = <0>;
  61                         clock-output-names = "clk_dummy";
  62                 };
  63         };
  64
  65         usbmisc2: usbmisc@5b0e0200 {
  66                 #index-cells = <1>;
  67                 compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
  68                 reg = <0x5b0e0200 0x200>;
  69         };
  70
  71         usbphy2: usbphy@5b110000 {
  72                 compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
  73                 reg = <0x5b110000 0x1000>;
  74                 clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
  75                 power-domains = <&pd IMX_SC_R_USB_1_PHY>;
  76                 status = "disabled";
  77         };
  78
  79         eqos_lpcg: clock-controller@5b240000 {
  80                 compatible = "fsl,imx8qxp-lpcg";
  81                 reg = <0x5b240000 0x10000>;
  82                 #clock-cells = <1>;
  83                 clocks = <&conn_enet0_root_clk>,
  84                          <&conn_axi_clk>,
  85                          <&conn_axi_clk>,
  86                          <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
  87                          <&conn_ipg_clk>;
  88                 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>,
  89                                 <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
  90                                 <IMX_LPCG_CLK_6>;
  91                 clock-output-names = "eqos_ptp",
  92                                      "eqos_mem_clk",
  93                                      "eqos_aclk",
  94                                      "eqos_clk",
  95                                      "eqos_csr_clk";
  96                 power-domains = <&pd IMX_SC_R_ENET_1>;
  97         };
  98
  99         usb2_2_lpcg: clock-controller@5b280000 {
 100                 compatible = "fsl,imx8qxp-lpcg";
 101                 reg = <0x5b280000 0x10000>;
 102                 #clock-cells = <1>;
 103                 clock-indices = <IMX_LPCG_CLK_7>;
 104                 clocks = <&conn_ipg_clk>;
 105                 clock-output-names = "usboh3_2_phy_ipg_clk";
 106                 power-domains = <&pd IMX_SC_R_USB_1_PHY>;
 107         };
 108
 109 };
 110
 111 &enet0_lpcg {
 112         clocks = <&conn_enet0_root_clk>,
 113                  <&conn_enet0_root_clk>,
 114                  <&conn_axi_clk>,
 115                  <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
 116                  <&conn_ipg_clk>,
 117                  <&conn_ipg_clk>;
 118 };
 119
 120 &fec1 {
 121         compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec";
 122         interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 123                      <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 124                      <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
 125                      <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 126         assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
 127         assigned-clock-rates = <125000000>;
 128 };
 129
 130 &usdhc1 {
 131         compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
 132         interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 133 };
 134
 135 &usdhc2 {
 136         compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
 137         interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 138 };
 139
 140 &usdhc3 {
 141         compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
 142         interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 143 };
 144
 145 &usbotg1 {
 146         interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 147         /*
 148          * usbotg1 and usbotg2 share one clock
 149          * scfw disable clock access and keep it always on
 150          * in case other core (M4) use one of these.
 151          */
 152         clocks = <&clk_dummy>;
 153 };