1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree Include file for Freescale Layerscape-2080A family SoC.
5 * Copyright 2016 Freescale Semiconductor, Inc.
8 * Abhimanyu Saini <abhimanyu.saini@nxp.com>
12 #include <dt-bindings/thermal/thermal.h>
13 #include <dt-bindings/interrupt-controller/arm-gic.h>
16 compatible = "fsl,ls2080a";
17 interrupt-parent = <&gic>;
35 device_type = "memory";
36 reg = <0x00000000 0x80000000 0 0x80000000>;
37 /* DRAM space - 1, size : 2 GB DRAM */
41 compatible = "fixed-clock";
43 clock-frequency = <100000000>;
44 clock-output-names = "sysclk";
47 gic: interrupt-controller@6000000 {
48 compatible = "arm,gic-v3";
49 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
50 <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
51 <0x0 0x0c0c0000 0 0x2000>, /* GICC */
52 <0x0 0x0c0d0000 0 0x1000>, /* GICH */
53 <0x0 0x0c0e0000 0 0x20000>; /* GICV */
54 #interrupt-cells = <3>;
59 interrupts = <1 9 0x4>;
61 its: gic-its@6020000 {
62 compatible = "arm,gic-v3-its";
64 reg = <0x0 0x6020000 0 0x20000>;
68 rstcr: syscon@1e60000 {
69 compatible = "fsl,ls2080a-rstcr", "syscon";
70 reg = <0x0 0x1e60000 0x0 0x4>;
74 compatible ="syscon-reboot";
81 cpu_thermal: cpu-thermal {
82 polling-delay-passive = <1000>;
83 polling-delay = <5000>;
85 thermal-sensors = <&tmu 4>;
88 cpu_alert: cpu-alert {
89 temperature = <75000>;
94 temperature = <85000>;
104 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
105 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
106 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
107 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
108 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
109 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
110 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
111 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
118 compatible = "arm,armv8-timer";
119 interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
120 <1 14 4>, /* Physical Non-Secure PPI, active-low */
121 <1 11 4>, /* Virtual PPI, active-low */
122 <1 10 4>; /* Hypervisor PPI, active-low */
127 compatible = "arm,armv8-pmuv3";
128 interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
132 compatible = "arm,psci-0.2";
137 compatible = "simple-bus";
138 #address-cells = <2>;
141 dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
143 clockgen: clocking@1300000 {
144 compatible = "fsl,ls2080a-clockgen";
145 reg = <0 0x1300000 0 0xa0000>;
151 compatible = "fsl,ls2080a-dcfg", "syscon";
152 reg = <0x0 0x1e00000 0x0 0x10000>;
157 compatible = "fsl,qoriq-tmu";
158 reg = <0x0 0x1f80000 0x0 0x10000>;
159 interrupts = <0 23 0x4>;
160 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
161 fsl,tmu-calibration = <0x00000000 0x00000026
162 0x00000001 0x0000002d
163 0x00000002 0x00000032
164 0x00000003 0x00000039
165 0x00000004 0x0000003f
166 0x00000005 0x00000046
167 0x00000006 0x0000004d
168 0x00000007 0x00000054
169 0x00000008 0x0000005a
170 0x00000009 0x00000061
171 0x0000000a 0x0000006a
172 0x0000000b 0x00000071
174 0x00010000 0x00000025
175 0x00010001 0x0000002c
176 0x00010002 0x00000035
177 0x00010003 0x0000003d
178 0x00010004 0x00000045
179 0x00010005 0x0000004e
180 0x00010006 0x00000057
181 0x00010007 0x00000061
182 0x00010008 0x0000006b
183 0x00010009 0x00000076
185 0x00020000 0x00000029
186 0x00020001 0x00000033
187 0x00020002 0x0000003d
188 0x00020003 0x00000049
189 0x00020004 0x00000056
190 0x00020005 0x00000061
191 0x00020006 0x0000006d
193 0x00030000 0x00000021
194 0x00030001 0x0000002a
195 0x00030002 0x0000003c
196 0x00030003 0x0000004e>;
198 #thermal-sensor-cells = <1>;
201 serial0: serial@21c0500 {
202 compatible = "fsl,ns16550", "ns16550a";
203 reg = <0x0 0x21c0500 0x0 0x100>;
204 clocks = <&clockgen 4 3>;
205 interrupts = <0 32 0x4>; /* Level high type */
208 serial1: serial@21c0600 {
209 compatible = "fsl,ns16550", "ns16550a";
210 reg = <0x0 0x21c0600 0x0 0x100>;
211 clocks = <&clockgen 4 3>;
212 interrupts = <0 32 0x4>; /* Level high type */
215 serial2: serial@21d0500 {
216 compatible = "fsl,ns16550", "ns16550a";
217 reg = <0x0 0x21d0500 0x0 0x100>;
218 clocks = <&clockgen 4 3>;
219 interrupts = <0 33 0x4>; /* Level high type */
222 serial3: serial@21d0600 {
223 compatible = "fsl,ns16550", "ns16550a";
224 reg = <0x0 0x21d0600 0x0 0x100>;
225 clocks = <&clockgen 4 3>;
226 interrupts = <0 33 0x4>; /* Level high type */
229 cluster1_core0_watchdog: wdt@c000000 {
230 compatible = "arm,sp805", "arm,primecell";
231 reg = <0x0 0xc000000 0x0 0x1000>;
232 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
233 clock-names = "wdog_clk", "apb_pclk";
236 cluster1_core1_watchdog: wdt@c010000 {
237 compatible = "arm,sp805", "arm,primecell";
238 reg = <0x0 0xc010000 0x0 0x1000>;
239 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
240 clock-names = "wdog_clk", "apb_pclk";
243 cluster2_core0_watchdog: wdt@c100000 {
244 compatible = "arm,sp805", "arm,primecell";
245 reg = <0x0 0xc100000 0x0 0x1000>;
246 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
247 clock-names = "wdog_clk", "apb_pclk";
250 cluster2_core1_watchdog: wdt@c110000 {
251 compatible = "arm,sp805", "arm,primecell";
252 reg = <0x0 0xc110000 0x0 0x1000>;
253 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
254 clock-names = "wdog_clk", "apb_pclk";
257 cluster3_core0_watchdog: wdt@c200000 {
258 compatible = "arm,sp805", "arm,primecell";
259 reg = <0x0 0xc200000 0x0 0x1000>;
260 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
261 clock-names = "wdog_clk", "apb_pclk";
264 cluster3_core1_watchdog: wdt@c210000 {
265 compatible = "arm,sp805", "arm,primecell";
266 reg = <0x0 0xc210000 0x0 0x1000>;
267 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
268 clock-names = "wdog_clk", "apb_pclk";
271 cluster4_core0_watchdog: wdt@c300000 {
272 compatible = "arm,sp805", "arm,primecell";
273 reg = <0x0 0xc300000 0x0 0x1000>;
274 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
275 clock-names = "wdog_clk", "apb_pclk";
278 cluster4_core1_watchdog: wdt@c310000 {
279 compatible = "arm,sp805", "arm,primecell";
280 reg = <0x0 0xc310000 0x0 0x1000>;
281 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
282 clock-names = "wdog_clk", "apb_pclk";
285 crypto: crypto@8000000 {
286 compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
288 #address-cells = <1>;
290 ranges = <0x0 0x00 0x8000000 0x100000>;
291 reg = <0x00 0x8000000 0x0 0x100000>;
292 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
296 compatible = "fsl,sec-v5.0-job-ring",
297 "fsl,sec-v4.0-job-ring";
298 reg = <0x10000 0x10000>;
299 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
303 compatible = "fsl,sec-v5.0-job-ring",
304 "fsl,sec-v4.0-job-ring";
305 reg = <0x20000 0x10000>;
306 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
310 compatible = "fsl,sec-v5.0-job-ring",
311 "fsl,sec-v4.0-job-ring";
312 reg = <0x30000 0x10000>;
313 interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
317 compatible = "fsl,sec-v5.0-job-ring",
318 "fsl,sec-v4.0-job-ring";
319 reg = <0x40000 0x10000>;
320 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
325 compatible = "fsl,dpaa2-console";
326 reg = <0x00000000 0x08340020 0 0x2>;
330 compatible = "fsl,dpaa2-ptp";
331 reg = <0x0 0x8b95000 0x0 0x100>;
332 clocks = <&clockgen 4 1>;
337 fsl_mc: fsl-mc@80c000000 {
338 compatible = "fsl,qoriq-mc";
339 reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
340 <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
342 iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */
344 #address-cells = <3>;
348 * Region type 0x0 - MC portals
349 * Region type 0x1 - QBMAN portals
351 ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
352 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
355 * Define the maximum number of MACs present on the SoC.
358 #address-cells = <1>;
362 compatible = "fsl,qoriq-mc-dpmac";
367 compatible = "fsl,qoriq-mc-dpmac";
372 compatible = "fsl,qoriq-mc-dpmac";
377 compatible = "fsl,qoriq-mc-dpmac";
382 compatible = "fsl,qoriq-mc-dpmac";
387 compatible = "fsl,qoriq-mc-dpmac";
392 compatible = "fsl,qoriq-mc-dpmac";
397 compatible = "fsl,qoriq-mc-dpmac";
402 compatible = "fsl,qoriq-mc-dpmac";
407 compatible = "fsl,qoriq-mc-dpmac";
412 compatible = "fsl,qoriq-mc-dpmac";
417 compatible = "fsl,qoriq-mc-dpmac";
422 compatible = "fsl,qoriq-mc-dpmac";
427 compatible = "fsl,qoriq-mc-dpmac";
432 compatible = "fsl,qoriq-mc-dpmac";
437 compatible = "fsl,qoriq-mc-dpmac";
443 smmu: iommu@5000000 {
444 compatible = "arm,mmu-500";
445 reg = <0 0x5000000 0 0x800000>;
446 #global-interrupts = <12>;
448 stream-match-mask = <0x7C00>;
450 interrupts = <0 13 4>, /* global secure fault */
451 <0 14 4>, /* combined secure interrupt */
452 <0 15 4>, /* global non-secure fault */
453 <0 16 4>, /* combined non-secure interrupt */
454 /* performance counter interrupts 0-7 */
455 <0 211 4>, <0 212 4>,
456 <0 213 4>, <0 214 4>,
457 <0 215 4>, <0 216 4>,
458 <0 217 4>, <0 218 4>,
459 /* per context interrupt, 64 interrupts */
460 <0 146 4>, <0 147 4>,
461 <0 148 4>, <0 149 4>,
462 <0 150 4>, <0 151 4>,
463 <0 152 4>, <0 153 4>,
464 <0 154 4>, <0 155 4>,
465 <0 156 4>, <0 157 4>,
466 <0 158 4>, <0 159 4>,
467 <0 160 4>, <0 161 4>,
468 <0 162 4>, <0 163 4>,
469 <0 164 4>, <0 165 4>,
470 <0 166 4>, <0 167 4>,
471 <0 168 4>, <0 169 4>,
472 <0 170 4>, <0 171 4>,
473 <0 172 4>, <0 173 4>,
474 <0 174 4>, <0 175 4>,
475 <0 176 4>, <0 177 4>,
476 <0 178 4>, <0 179 4>,
477 <0 180 4>, <0 181 4>,
478 <0 182 4>, <0 183 4>,
479 <0 184 4>, <0 185 4>,
480 <0 186 4>, <0 187 4>,
481 <0 188 4>, <0 189 4>,
482 <0 190 4>, <0 191 4>,
483 <0 192 4>, <0 193 4>,
484 <0 194 4>, <0 195 4>,
485 <0 196 4>, <0 197 4>,
486 <0 198 4>, <0 199 4>,
487 <0 200 4>, <0 201 4>,
488 <0 202 4>, <0 203 4>,
489 <0 204 4>, <0 205 4>,
490 <0 206 4>, <0 207 4>,
491 <0 208 4>, <0 209 4>;
496 compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
497 #address-cells = <1>;
499 reg = <0x0 0x2100000 0x0 0x10000>;
500 interrupts = <0 26 0x4>; /* Level high type */
501 clocks = <&clockgen 4 3>;
502 clock-names = "dspi";
503 spi-num-chipselects = <5>;
506 esdhc: esdhc@2140000 {
508 compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
509 reg = <0x0 0x2140000 0x0 0x10000>;
510 interrupts = <0 28 0x4>; /* Level high type */
511 clocks = <&clockgen 4 1>;
512 voltage-ranges = <1800 1800 3300 3300>;
518 gpio0: gpio@2300000 {
519 compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
520 reg = <0x0 0x2300000 0x0 0x10000>;
521 interrupts = <0 36 0x4>; /* Level high type */
525 interrupt-controller;
526 #interrupt-cells = <2>;
529 gpio1: gpio@2310000 {
530 compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
531 reg = <0x0 0x2310000 0x0 0x10000>;
532 interrupts = <0 36 0x4>; /* Level high type */
536 interrupt-controller;
537 #interrupt-cells = <2>;
540 gpio2: gpio@2320000 {
541 compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
542 reg = <0x0 0x2320000 0x0 0x10000>;
543 interrupts = <0 37 0x4>; /* Level high type */
547 interrupt-controller;
548 #interrupt-cells = <2>;
551 gpio3: gpio@2330000 {
552 compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
553 reg = <0x0 0x2330000 0x0 0x10000>;
554 interrupts = <0 37 0x4>; /* Level high type */
558 interrupt-controller;
559 #interrupt-cells = <2>;
564 compatible = "fsl,vf610-i2c";
565 #address-cells = <1>;
567 reg = <0x0 0x2000000 0x0 0x10000>;
568 interrupts = <0 34 0x4>; /* Level high type */
570 clocks = <&clockgen 4 3>;
575 compatible = "fsl,vf610-i2c";
576 #address-cells = <1>;
578 reg = <0x0 0x2010000 0x0 0x10000>;
579 interrupts = <0 34 0x4>; /* Level high type */
581 clocks = <&clockgen 4 3>;
586 compatible = "fsl,vf610-i2c";
587 #address-cells = <1>;
589 reg = <0x0 0x2020000 0x0 0x10000>;
590 interrupts = <0 35 0x4>; /* Level high type */
592 clocks = <&clockgen 4 3>;
597 compatible = "fsl,vf610-i2c";
598 #address-cells = <1>;
600 reg = <0x0 0x2030000 0x0 0x10000>;
601 interrupts = <0 35 0x4>; /* Level high type */
603 clocks = <&clockgen 4 3>;
607 compatible = "fsl,ifc", "simple-bus";
608 reg = <0x0 0x2240000 0x0 0x20000>;
609 interrupts = <0 21 0x4>; /* Level high type */
611 #address-cells = <2>;
614 ranges = <0 0 0x5 0x80000000 0x08000000
615 2 0 0x5 0x30000000 0x00010000
616 3 0 0x5 0x20000000 0x00010000>;
621 compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
622 #address-cells = <1>;
624 reg = <0x0 0x20c0000 0x0 0x10000>,
625 <0x0 0x20000000 0x0 0x10000000>;
626 reg-names = "QuadSPI", "QuadSPI-memory";
627 interrupts = <0 25 0x4>; /* Level high type */
628 clocks = <&clockgen 4 3>, <&clockgen 4 3>;
629 clock-names = "qspi_en", "qspi";
632 pcie1: pcie@3400000 {
633 compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
634 reg-names = "regs", "config";
635 interrupts = <0 108 0x4>; /* Level high type */
636 interrupt-names = "intr";
637 #address-cells = <3>;
642 bus-range = <0x0 0xff>;
644 #interrupt-cells = <1>;
645 interrupt-map-mask = <0 0 0 7>;
646 interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
647 <0000 0 0 2 &gic 0 0 0 110 4>,
648 <0000 0 0 3 &gic 0 0 0 111 4>,
649 <0000 0 0 4 &gic 0 0 0 112 4>;
653 pcie2: pcie@3500000 {
654 compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
655 reg-names = "regs", "config";
656 interrupts = <0 113 0x4>; /* Level high type */
657 interrupt-names = "intr";
658 #address-cells = <3>;
663 bus-range = <0x0 0xff>;
665 #interrupt-cells = <1>;
666 interrupt-map-mask = <0 0 0 7>;
667 interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
668 <0000 0 0 2 &gic 0 0 0 115 4>,
669 <0000 0 0 3 &gic 0 0 0 116 4>,
670 <0000 0 0 4 &gic 0 0 0 117 4>;
674 pcie3: pcie@3600000 {
675 compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
676 reg-names = "regs", "config";
677 interrupts = <0 118 0x4>; /* Level high type */
678 interrupt-names = "intr";
679 #address-cells = <3>;
683 num-viewport = <256>;
684 bus-range = <0x0 0xff>;
686 #interrupt-cells = <1>;
687 interrupt-map-mask = <0 0 0 7>;
688 interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
689 <0000 0 0 2 &gic 0 0 0 120 4>,
690 <0000 0 0 3 &gic 0 0 0 121 4>,
691 <0000 0 0 4 &gic 0 0 0 122 4>;
695 pcie4: pcie@3700000 {
696 compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
697 reg-names = "regs", "config";
698 interrupts = <0 123 0x4>; /* Level high type */
699 interrupt-names = "intr";
700 #address-cells = <3>;
705 bus-range = <0x0 0xff>;
707 #interrupt-cells = <1>;
708 interrupt-map-mask = <0 0 0 7>;
709 interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
710 <0000 0 0 2 &gic 0 0 0 125 4>,
711 <0000 0 0 3 &gic 0 0 0 126 4>,
712 <0000 0 0 4 &gic 0 0 0 127 4>;
716 sata0: sata@3200000 {
718 compatible = "fsl,ls2080a-ahci";
719 reg = <0x0 0x3200000 0x0 0x10000>;
720 interrupts = <0 133 0x4>; /* Level high type */
721 clocks = <&clockgen 4 3>;
725 sata1: sata@3210000 {
727 compatible = "fsl,ls2080a-ahci";
728 reg = <0x0 0x3210000 0x0 0x10000>;
729 interrupts = <0 136 0x4>; /* Level high type */
730 clocks = <&clockgen 4 3>;
736 compatible = "snps,dwc3";
737 reg = <0x0 0x3100000 0x0 0x10000>;
738 interrupts = <0 80 0x4>; /* Level high type */
740 snps,quirk-frame-length-adjustment = <0x20>;
741 snps,dis_rxdet_inp3_quirk;
742 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
747 compatible = "snps,dwc3";
748 reg = <0x0 0x3110000 0x0 0x10000>;
749 interrupts = <0 81 0x4>; /* Level high type */
751 snps,quirk-frame-length-adjustment = <0x20>;
752 snps,dis_rxdet_inp3_quirk;
753 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
757 compatible = "arm,ccn-504";
758 reg = <0x0 0x04000000 0x0 0x01000000>;
759 interrupts = <0 12 4>;
763 ddr1: memory-controller@1080000 {
764 compatible = "fsl,qoriq-memory-controller";
765 reg = <0x0 0x1080000 0x0 0x1000>;
766 interrupts = <0 17 0x4>;
770 ddr2: memory-controller@1090000 {
771 compatible = "fsl,qoriq-memory-controller";
772 reg = <0x0 0x1090000 0x0 0x1000>;
773 interrupts = <0 18 0x4>;
779 compatible = "linaro,optee-tz";