arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for NXP LS1028A RDB Board.
   4  *
   5  * Copyright 2018-2021 NXP
   6  *
   7  * Harninder Rai <harninder.rai@nxp.com>
   8  *
   9  */
  10
  11 /dts-v1/;
  12 #include "fsl-ls1028a.dtsi"
  13
  14 / {
  15         model = "LS1028A RDB Board";
  16         compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
  17
  18         aliases {
  19                 crypto = &crypto;
  20                 serial0 = &duart0;
  21                 serial1 = &duart1;
  22                 mmc0 = &esdhc;
  23                 mmc1 = &esdhc1;
  24                 rtc1 = &ftm_alarm1;
  25                 spi0 = &fspi;
  26                 ethernet0 = &enetc_port0;
  27                 ethernet1 = &enetc_port2;
  28                 ethernet2 = &mscc_felix_port0;
  29                 ethernet3 = &mscc_felix_port1;
  30                 ethernet4 = &mscc_felix_port2;
  31                 ethernet5 = &mscc_felix_port3;
  32                 ethernet6 = &mscc_felix_port4;
  33                 ethernet7 = &mscc_felix_port5;
  34                 ethernet8 = &enetc_port3;
  35         };
  36
  37         chosen {
  38                 stdout-path = "serial0:115200n8";
  39         };
  40
  41         memory@80000000 {
  42                 device_type = "memory";
  43                 reg = <0x0 0x80000000 0x1 0x0000000>;
  44         };
  45
  46         sys_mclk: clock-mclk {
  47                 compatible = "fixed-clock";
  48                 #clock-cells = <0>;
  49                 clock-frequency = <25000000>;
  50         };
  51
  52         reg_1p8v: regulator-1p8v {
  53                 compatible = "regulator-fixed";
  54                 regulator-name = "1P8V";
  55                 regulator-min-microvolt = <1800000>;
  56                 regulator-max-microvolt = <1800000>;
  57                 regulator-always-on;
  58         };
  59
  60         sb_3v3: regulator-sb3v3 {
  61                 compatible = "regulator-fixed";
  62                 regulator-name = "3v3_vbus";
  63                 regulator-min-microvolt = <3300000>;
  64                 regulator-max-microvolt = <3300000>;
  65                 regulator-boot-on;
  66                 regulator-always-on;
  67         };
  68
  69         sound {
  70                 compatible = "simple-audio-card";
  71                 simple-audio-card,format = "i2s";
  72                 simple-audio-card,widgets =
  73                         "Microphone", "Microphone Jack",
  74                         "Headphone", "Headphone Jack",
  75                         "Speaker", "Speaker Ext",
  76                         "Line", "Line In Jack";
  77                 simple-audio-card,routing =
  78                         "MIC_IN", "Microphone Jack",
  79                         "Microphone Jack", "Mic Bias",
  80                         "LINE_IN", "Line In Jack",
  81                         "Headphone Jack", "HP_OUT",
  82                         "Speaker Ext", "LINE_OUT";
  83
  84                 simple-audio-card,cpu {
  85                         sound-dai = <&sai4>;
  86                         frame-master;
  87                         bitclock-master;
  88                 };
  89
  90                 simple-audio-card,codec {
  91                         sound-dai = <&sgtl5000>;
  92                         frame-master;
  93                         bitclock-master;
  94                         system-clock-frequency = <25000000>;
  95                 };
  96         };
  97 };
  98
  99 &can0 {
 100         status = "okay";
 101
 102         can-transceiver {
 103                 max-bitrate = <5000000>;
 104         };
 105 };
 106
 107 &can1 {
 108         status = "okay";
 109
 110         can-transceiver {
 111                 max-bitrate = <5000000>;
 112         };
 113 };
 114
 115 &duart0 {
 116         status = "okay";
 117 };
 118
 119 &duart1 {
 120         status = "okay";
 121 };
 122
 123 &enetc_mdio_pf3 {
 124         sgmii_phy0: ethernet-phy@2 {
 125                 reg = <0x2>;
 126         };
 127
 128         /* VSC8514 QSGMII quad PHY */
 129         qsgmii_phy0: ethernet-phy@10 {
 130                 reg = <0x10>;
 131         };
 132
 133         qsgmii_phy1: ethernet-phy@11 {
 134                 reg = <0x11>;
 135         };
 136
 137         qsgmii_phy2: ethernet-phy@12 {
 138                 reg = <0x12>;
 139         };
 140
 141         qsgmii_phy3: ethernet-phy@13 {
 142                 reg = <0x13>;
 143         };
 144 };
 145
 146 &enetc_port0 {
 147         phy-handle = <&sgmii_phy0>;
 148         phy-mode = "sgmii";
 149         managed = "in-band-status";
 150         status = "okay";
 151 };
 152
 153 &enetc_port2 {
 154         status = "okay";
 155 };
 156
 157 &enetc_port3 {
 158         status = "okay";
 159 };
 160
 161 &esdhc {
 162         sd-uhs-sdr104;
 163         sd-uhs-sdr50;
 164         sd-uhs-sdr25;
 165         sd-uhs-sdr12;
 166         status = "okay";
 167 };
 168
 169 &esdhc1 {
 170         mmc-hs200-1_8v;
 171         mmc-hs400-1_8v;
 172         bus-width = <8>;
 173         status = "okay";
 174 };
 175
 176 &fspi {
 177         status = "okay";
 178
 179         mt35xu02g0: flash@0 {
 180                 compatible = "jedec,spi-nor";
 181                 #address-cells = <1>;
 182                 #size-cells = <1>;
 183                 spi-max-frequency = <50000000>;
 184                 /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
 185                 spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
 186                 spi-tx-bus-width = <1>; /* 1 SPI Tx line */
 187                 reg = <0>;
 188         };
 189 };
 190
 191 &ftm_alarm1 {
 192         status = "okay";
 193 };
 194
 195 &i2c0 {
 196         status = "okay";
 197
 198         i2c-mux@77 {
 199                 compatible = "nxp,pca9847";
 200                 reg = <0x77>;
 201                 #address-cells = <1>;
 202                 #size-cells = <0>;
 203
 204                 i2c@1 {
 205                         #address-cells = <1>;
 206                         #size-cells = <0>;
 207                         reg = <0x1>;
 208
 209                         sgtl5000: audio-codec@a {
 210                                 #sound-dai-cells = <0>;
 211                                 compatible = "fsl,sgtl5000";
 212                                 reg = <0xa>;
 213                                 VDDA-supply = <&reg_1p8v>;
 214                                 VDDIO-supply = <&reg_1p8v>;
 215                                 clocks = <&sys_mclk>;
 216                                 sclk-strength = <3>;
 217                         };
 218                 };
 219
 220                 i2c@2 {
 221                         #address-cells = <1>;
 222                         #size-cells = <0>;
 223                         reg = <0x02>;
 224
 225                         current-monitor@40 {
 226                                 compatible = "ti,ina220";
 227                                 reg = <0x40>;
 228                                 shunt-resistor = <500>;
 229                         };
 230                 };
 231
 232                 i2c@3 {
 233                         #address-cells = <1>;
 234                         #size-cells = <0>;
 235                         reg = <0x3>;
 236
 237                         temperature-sensor@4c {
 238                                 compatible = "nxp,sa56004";
 239                                 reg = <0x4c>;
 240                                 vcc-supply = <&sb_3v3>;
 241                         };
 242
 243                         rtc@51 {
 244                                 compatible = "nxp,pcf2129";
 245                                 reg = <0x51>;
 246                         };
 247                 };
 248         };
 249 };
 250
 251 &mscc_felix {
 252         status = "okay";
 253 };
 254
 255 &mscc_felix_port0 {
 256         label = "swp0";
 257         managed = "in-band-status";
 258         phy-handle = <&qsgmii_phy0>;
 259         phy-mode = "qsgmii";
 260         status = "okay";
 261 };
 262
 263 &mscc_felix_port1 {
 264         label = "swp1";
 265         managed = "in-band-status";
 266         phy-handle = <&qsgmii_phy1>;
 267         phy-mode = "qsgmii";
 268         status = "okay";
 269 };
 270
 271 &mscc_felix_port2 {
 272         label = "swp2";
 273         managed = "in-band-status";
 274         phy-handle = <&qsgmii_phy2>;
 275         phy-mode = "qsgmii";
 276         status = "okay";
 277 };
 278
 279 &mscc_felix_port3 {
 280         label = "swp3";
 281         managed = "in-band-status";
 282         phy-handle = <&qsgmii_phy3>;
 283         phy-mode = "qsgmii";
 284         status = "okay";
 285 };
 286
 287 &mscc_felix_port4 {
 288         status = "okay";
 289 };
 290
 291 &mscc_felix_port5 {
 292         status = "okay";
 293 };
 294
 295 &optee {
 296         status = "okay";
 297 };
 298
 299 &pwm0 {
 300         status = "okay";
 301 };
 302
 303 &sai4 {
 304         status = "okay";
 305 };
 306
 307 &sata {
 308         status = "okay";
 309 };
 310
 311 &usb0 {
 312         dr_mode = "host";
 313         status = "okay";
 314 };
 315
 316 &usb1 {
 317         status = "okay";
 318 };