1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree Include file for NXP Layerscape-1012A family SoC.
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2019-2020 NXP
10 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include <dt-bindings/thermal/thermal.h>
15 compatible = "fsl,ls1012a";
16 interrupt-parent = <&gic>;
36 compatible = "arm,cortex-a53";
38 clocks = <&clockgen QORIQ_CLK_CMUX 0>;
40 cpu-idle-states = <&CPU_PH20>;
46 * PSCI node is not added default, U-boot will add missing
47 * parts if it determines to use PSCI.
49 entry-method = "psci";
52 compatible = "arm,idle-state";
53 idle-state-name = "PH20";
54 arm,psci-suspend-param = <0x0>;
55 entry-latency-us = <1000>;
56 exit-latency-us = <1000>;
57 min-residency-us = <3000>;
62 compatible = "fixed-clock";
64 clock-frequency = <125000000>;
65 clock-output-names = "sysclk";
69 compatible = "fixed-clock";
71 clock-frequency = <100000000>;
72 clock-output-names = "coreclk";
76 compatible = "arm,armv8-timer";
77 interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
78 <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
79 <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
80 <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
84 compatible = "arm,armv8-pmuv3";
85 interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
88 gic: interrupt-controller@1400000 {
89 compatible = "arm,gic-400";
90 #interrupt-cells = <3>;
92 reg = <0x0 0x1401000 0 0x1000>, /* GICD */
93 <0x0 0x1402000 0 0x2000>, /* GICC */
94 <0x0 0x1404000 0 0x2000>, /* GICH */
95 <0x0 0x1406000 0 0x2000>; /* GICV */
96 interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
100 compatible = "syscon-reboot";
107 cpu_thermal: cpu-thermal {
108 polling-delay-passive = <1000>;
109 polling-delay = <5000>;
110 thermal-sensors = <&tmu 0>;
113 cpu_alert: cpu-alert {
114 temperature = <85000>;
120 temperature = <95000>;
130 <&cpu0 THERMAL_NO_LIMIT
138 compatible = "simple-bus";
139 #address-cells = <2>;
144 compatible = "fsl,ls1021a-qspi";
145 #address-cells = <1>;
147 reg = <0x0 0x1550000 0x0 0x10000>,
148 <0x0 0x40000000 0x0 0x10000000>;
149 reg-names = "QuadSPI", "QuadSPI-memory";
150 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
151 clock-names = "qspi_en", "qspi";
152 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
153 QORIQ_CLK_PLL_DIV(1)>,
154 <&clockgen QORIQ_CLK_PLATFORM_PLL
155 QORIQ_CLK_PLL_DIV(1)>;
159 esdhc0: esdhc@1560000 {
160 compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
161 reg = <0x0 0x1560000 0x0 0x10000>;
162 interrupts = <0 62 0x4>;
163 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
164 QORIQ_CLK_PLL_DIV(1)>;
165 voltage-ranges = <1800 1800 3300 3300>;
173 compatible = "fsl,ls1012a-scfg", "syscon";
174 reg = <0x0 0x1570000 0x0 0x10000>;
178 esdhc1: esdhc@1580000 {
179 compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
180 reg = <0x0 0x1580000 0x0 0x10000>;
181 interrupts = <0 65 0x4>;
182 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
183 QORIQ_CLK_PLL_DIV(1)>;
184 voltage-ranges = <1800 1800 3300 3300>;
192 crypto: crypto@1700000 {
193 compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
196 #address-cells = <1>;
198 ranges = <0x0 0x00 0x1700000 0x100000>;
199 reg = <0x00 0x1700000 0x0 0x100000>;
200 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
204 compatible = "fsl,sec-v5.4-job-ring",
205 "fsl,sec-v5.0-job-ring",
206 "fsl,sec-v4.0-job-ring";
207 reg = <0x10000 0x10000>;
208 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
212 compatible = "fsl,sec-v5.4-job-ring",
213 "fsl,sec-v5.0-job-ring",
214 "fsl,sec-v4.0-job-ring";
215 reg = <0x20000 0x10000>;
216 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
220 compatible = "fsl,sec-v5.4-job-ring",
221 "fsl,sec-v5.0-job-ring",
222 "fsl,sec-v4.0-job-ring";
223 reg = <0x30000 0x10000>;
224 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
228 compatible = "fsl,sec-v5.4-job-ring",
229 "fsl,sec-v5.0-job-ring",
230 "fsl,sec-v4.0-job-ring";
231 reg = <0x40000 0x10000>;
232 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
236 compatible = "fsl,sec-v5.4-rtic",
239 #address-cells = <1>;
241 reg = <0x60000 0x100>, <0x60e00 0x18>;
242 ranges = <0x0 0x60100 0x500>;
245 compatible = "fsl,sec-v5.4-rtic-memory",
246 "fsl,sec-v5.0-rtic-memory",
247 "fsl,sec-v4.0-rtic-memory";
248 reg = <0x00 0x20>, <0x100 0x100>;
252 compatible = "fsl,sec-v5.4-rtic-memory",
253 "fsl,sec-v5.0-rtic-memory",
254 "fsl,sec-v4.0-rtic-memory";
255 reg = <0x20 0x20>, <0x200 0x100>;
259 compatible = "fsl,sec-v5.4-rtic-memory",
260 "fsl,sec-v5.0-rtic-memory",
261 "fsl,sec-v4.0-rtic-memory";
262 reg = <0x40 0x20>, <0x300 0x100>;
266 compatible = "fsl,sec-v5.4-rtic-memory",
267 "fsl,sec-v5.0-rtic-memory",
268 "fsl,sec-v4.0-rtic-memory";
269 reg = <0x60 0x20>, <0x400 0x100>;
275 compatible = "fsl,ls1021a-sfp";
276 reg = <0x0 0x1e80000 0x0 0x10000>;
277 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
278 QORIQ_CLK_PLL_DIV(4)>;
282 sec_mon: sec_mon@1e90000 {
283 compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
285 reg = <0x0 0x1e90000 0x0 0x10000>;
286 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
287 <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
291 compatible = "fsl,ls1012a-dcfg",
293 reg = <0x0 0x1ee0000 0x0 0x10000>;
297 clockgen: clocking@1ee1000 {
298 compatible = "fsl,ls1012a-clockgen";
299 reg = <0x0 0x1ee1000 0x0 0x1000>;
301 clocks = <&sysclk &coreclk>;
302 clock-names = "sysclk", "coreclk";
306 compatible = "fsl,qoriq-tmu";
307 reg = <0x0 0x1f00000 0x0 0x10000>;
308 interrupts = <0 33 0x4>;
309 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
310 fsl,tmu-calibration = <0x00000000 0x00000025
311 0x00000001 0x0000002c
312 0x00000002 0x00000032
313 0x00000003 0x00000039
314 0x00000004 0x0000003f
315 0x00000005 0x00000046
316 0x00000006 0x0000004c
317 0x00000007 0x00000053
318 0x00000008 0x00000059
319 0x00000009 0x0000005f
320 0x0000000a 0x00000066
321 0x0000000b 0x0000006c
323 0x00010000 0x00000026
324 0x00010001 0x0000002d
325 0x00010002 0x00000035
326 0x00010003 0x0000003d
327 0x00010004 0x00000045
328 0x00010005 0x0000004d
329 0x00010006 0x00000055
330 0x00010007 0x0000005d
331 0x00010008 0x00000065
332 0x00010009 0x0000006d
334 0x00020000 0x00000026
335 0x00020001 0x00000030
336 0x00020002 0x0000003a
337 0x00020003 0x00000044
338 0x00020004 0x0000004e
339 0x00020005 0x00000059
340 0x00020006 0x00000063
342 0x00030000 0x00000014
343 0x00030001 0x00000021
344 0x00030002 0x0000002e
345 0x00030003 0x0000003a
346 0x00030004 0x00000047
347 0x00030005 0x00000053
348 0x00030006 0x00000060>;
350 #thermal-sensor-cells = <1>;
354 compatible = "fsl,vf610-i2c";
355 #address-cells = <1>;
357 reg = <0x0 0x2180000 0x0 0x10000>;
358 interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
359 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
360 QORIQ_CLK_PLL_DIV(4)>;
365 compatible = "fsl,vf610-i2c";
366 #address-cells = <1>;
368 reg = <0x0 0x2190000 0x0 0x10000>;
369 interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
370 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
371 QORIQ_CLK_PLL_DIV(4)>;
376 compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
377 #address-cells = <1>;
379 reg = <0x0 0x2100000 0x0 0x10000>;
380 interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
381 clock-names = "dspi";
382 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
383 QORIQ_CLK_PLL_DIV(1)>;
384 spi-num-chipselects = <5>;
389 duart0: serial@21c0500 {
390 compatible = "fsl,ns16550", "ns16550a";
391 reg = <0x00 0x21c0500 0x0 0x100>;
392 interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
393 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
394 QORIQ_CLK_PLL_DIV(1)>;
398 duart1: serial@21c0600 {
399 compatible = "fsl,ns16550", "ns16550a";
400 reg = <0x00 0x21c0600 0x0 0x100>;
401 interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
402 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
403 QORIQ_CLK_PLL_DIV(1)>;
407 gpio0: gpio@2300000 {
408 compatible = "fsl,qoriq-gpio";
409 reg = <0x0 0x2300000 0x0 0x10000>;
410 interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
413 interrupt-controller;
414 #interrupt-cells = <2>;
417 gpio1: gpio@2310000 {
418 compatible = "fsl,qoriq-gpio";
419 reg = <0x0 0x2310000 0x0 0x10000>;
420 interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
423 interrupt-controller;
424 #interrupt-cells = <2>;
427 wdog0: watchdog@2ad0000 {
428 compatible = "fsl,ls1012a-wdt",
430 reg = <0x0 0x2ad0000 0x0 0x10000>;
431 interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
432 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
437 #sound-dai-cells = <0>;
438 compatible = "fsl,vf610-sai";
439 reg = <0x0 0x2b50000 0x0 0x10000>;
440 interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
441 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
442 QORIQ_CLK_PLL_DIV(4)>,
443 <&clockgen QORIQ_CLK_PLATFORM_PLL
444 QORIQ_CLK_PLL_DIV(4)>,
445 <&clockgen QORIQ_CLK_PLATFORM_PLL
446 QORIQ_CLK_PLL_DIV(4)>,
447 <&clockgen QORIQ_CLK_PLATFORM_PLL
448 QORIQ_CLK_PLL_DIV(4)>;
449 clock-names = "bus", "mclk1", "mclk2", "mclk3";
450 dma-names = "tx", "rx";
451 dmas = <&edma0 1 47>,
457 #sound-dai-cells = <0>;
458 compatible = "fsl,vf610-sai";
459 reg = <0x0 0x2b60000 0x0 0x10000>;
460 interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
461 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
462 QORIQ_CLK_PLL_DIV(4)>,
463 <&clockgen QORIQ_CLK_PLATFORM_PLL
464 QORIQ_CLK_PLL_DIV(4)>,
465 <&clockgen QORIQ_CLK_PLATFORM_PLL
466 QORIQ_CLK_PLL_DIV(4)>,
467 <&clockgen QORIQ_CLK_PLATFORM_PLL
468 QORIQ_CLK_PLL_DIV(4)>;
469 clock-names = "bus", "mclk1", "mclk2", "mclk3";
470 dma-names = "tx", "rx";
471 dmas = <&edma0 1 45>,
476 edma0: dma-controller@2c00000 {
478 compatible = "fsl,vf610-edma";
479 reg = <0x0 0x2c00000 0x0 0x10000>,
480 <0x0 0x2c10000 0x0 0x10000>,
481 <0x0 0x2c20000 0x0 0x10000>;
482 interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
483 <0 103 IRQ_TYPE_LEVEL_HIGH>;
484 interrupt-names = "edma-tx", "edma-err";
487 clock-names = "dmamux0", "dmamux1";
488 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
489 QORIQ_CLK_PLL_DIV(4)>,
490 <&clockgen QORIQ_CLK_PLATFORM_PLL
491 QORIQ_CLK_PLL_DIV(4)>;
495 compatible = "snps,dwc3";
496 reg = <0x0 0x2f00000 0x0 0x10000>;
497 interrupts = <0 60 0x4>;
499 snps,quirk-frame-length-adjustment = <0x20>;
500 snps,dis_rxdet_inp3_quirk;
501 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
505 compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
506 reg = <0x0 0x3200000 0x0 0x10000>,
507 <0x0 0x20140520 0x0 0x4>;
508 reg-names = "ahci", "sata-ecc";
509 interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
510 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
511 QORIQ_CLK_PLL_DIV(1)>;
517 compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
518 reg = <0x0 0x8600000 0x0 0x1000>;
519 interrupts = <0 139 0x4>;
524 msi: msi-controller1@1572000 {
525 compatible = "fsl,ls1012a-msi";
526 reg = <0x0 0x1572000 0x0 0x8>;
528 interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
531 pcie1: pcie@3400000 {
532 compatible = "fsl,ls1012a-pcie";
533 reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
534 <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
535 reg-names = "regs", "config";
536 interrupts = <0 118 0x4>, /* controller interrupt */
537 <0 117 0x4>; /* PME interrupt */
538 interrupt-names = "aer", "pme";
539 #address-cells = <3>;
543 bus-range = <0x0 0xff>;
544 ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
545 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
547 #interrupt-cells = <1>;
548 interrupt-map-mask = <0 0 0 7>;
549 interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>,
550 <0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
551 <0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
552 <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
556 rcpm: power-controller@1ee2140 {
557 compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
558 reg = <0x0 0x1ee2140 0x0 0x4>;
559 #fsl,rcpm-wakeup-cells = <1>;
562 ftm_alarm0: timer@29d0000 {
563 compatible = "fsl,ls1012a-ftm-alarm";
564 reg = <0x0 0x29d0000 0x0 0x10000>;
565 fsl,rcpm-wakeup = <&rcpm 0x20000>;
566 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
573 compatible = "linaro,optee-tz";