arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Samsung Exynos5433 TM2 board device tree source
   4  *
   5  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
   6  *
   7  * Common device tree source file for Samsung's TM2 and TM2E boards
   8  * which are based on Samsung Exynos5433 SoC.
   9  */
  10
  11 /dts-v1/;
  12 #include "exynos5433.dtsi"
  13 #include <dt-bindings/clock/samsung,s2mps11.h>
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/input/input.h>
  16 #include <dt-bindings/interrupt-controller/irq.h>
  17 #include <dt-bindings/sound/samsung-i2s.h>
  18
  19 / {
  20         aliases {
  21                 gsc0 = &gsc_0;
  22                 gsc1 = &gsc_1;
  23                 gsc2 = &gsc_2;
  24                 mmc0 = &mshc_0;
  25                 mmc2 = &mshc_2;
  26                 pinctrl0 = &pinctrl_alive;
  27                 pinctrl1 = &pinctrl_aud;
  28                 pinctrl2 = &pinctrl_cpif;
  29                 pinctrl3 = &pinctrl_ese;
  30                 pinctrl4 = &pinctrl_finger;
  31                 pinctrl5 = &pinctrl_fsys;
  32                 pinctrl6 = &pinctrl_imem;
  33                 pinctrl7 = &pinctrl_nfc;
  34                 pinctrl8 = &pinctrl_peric;
  35                 pinctrl9 = &pinctrl_touch;
  36                 serial0 = &serial_0;
  37                 serial1 = &serial_1;
  38                 serial2 = &serial_2;
  39                 serial3 = &serial_3;
  40                 spi0 = &spi_0;
  41                 spi1 = &spi_1;
  42                 spi2 = &spi_2;
  43                 spi3 = &spi_3;
  44                 spi4 = &spi_4;
  45         };
  46
  47         chosen {
  48                 stdout-path = &serial_1;
  49         };
  50
  51         memory@20000000 {
  52                 device_type = "memory";
  53                 reg = <0x0 0x20000000 0x0 0xc0000000>;
  54         };
  55
  56         gpio-keys {
  57                 compatible = "gpio-keys";
  58
  59                 power-key {
  60                         gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
  61                         linux,code = <KEY_POWER>;
  62                         label = "power key";
  63                         debounce-interval = <10>;
  64                 };
  65
  66                 volume-up-key {
  67                         gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_VOLUMEUP>;
  69                         label = "volume-up key";
  70                         debounce-interval = <10>;
  71                 };
  72
  73                 volume-down-key {
  74                         gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
  75                         linux,code = <KEY_VOLUMEDOWN>;
  76                         label = "volume-down key";
  77                         debounce-interval = <10>;
  78                 };
  79
  80                 homepage-key {
  81                         gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_MENU>;
  83                         label = "homepage key";
  84                         debounce-interval = <10>;
  85                 };
  86         };
  87
  88         i2c_max98504: i2c-gpio-0 {
  89                 compatible = "i2c-gpio";
  90                 sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
  91                 scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
  92                 i2c-gpio,delay-us = <2>;
  93                 #address-cells = <1>;
  94                 #size-cells = <0>;
  95
  96                 max98504: amplifier@31 {
  97                         compatible = "maxim,max98504";
  98                         reg = <0x31>;
  99
 100                         DIOVDD-supply = <&ldo3_reg>;
 101                         DVDD-supply = <&ldo3_reg>;
 102                         PVDD-supply = <&vph_pwr_regulator>;
 103                 };
 104         };
 105
 106         vph_pwr_regulator: regulator-vph-pwr {
 107                 compatible = "regulator-fixed";
 108                 regulator-name = "VPH_PWR";
 109                 regulator-min-microvolt = <4200000>;
 110                 regulator-max-microvolt = <4200000>;
 111         };
 112
 113         irda_regulator: regulator-irda {
 114                 compatible = "regulator-fixed";
 115                 enable-active-high;
 116                 gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
 117                 regulator-name = "irda_regulator";
 118         };
 119
 120         sound {
 121                 compatible = "samsung,tm2-audio";
 122                 audio-codec = <&wm5110>, <&hdmi>;
 123                 i2s-controller = <&i2s0 0>, <&i2s1 0>;
 124                 audio-amplifier = <&max98504>;
 125                 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
 126                 model = "wm5110";
 127                 audio-routing = /* Headphone */
 128                                 "HP", "HPOUT1L",
 129                                 "HP", "HPOUT1R",
 130
 131                                 /* Speaker */
 132                                 "SPK", "SPKOUT",
 133                                 "SPKOUT", "HPOUT2L",
 134                                 "SPKOUT", "HPOUT2R",
 135
 136                                 /* Receiver */
 137                                 "RCV", "HPOUT3L",
 138                                 "RCV", "HPOUT3R";
 139         };
 140 };
 141
 142 &adc {
 143         vdd-supply = <&ldo3_reg>;
 144         status = "okay";
 145
 146         thermistor-ap {
 147                 compatible = "murata,ncp03wf104";
 148                 pullup-uv = <1800000>;
 149                 pullup-ohm = <100000>;
 150                 pulldown-ohm = <0>;
 151                 io-channels = <&adc 0>;
 152         };
 153
 154         thermistor-battery {
 155                 compatible = "murata,ncp03wf104";
 156                 pullup-uv = <1800000>;
 157                 pullup-ohm = <100000>;
 158                 pulldown-ohm = <0>;
 159                 io-channels = <&adc 1>;
 160                 #thermal-sensor-cells = <0>;
 161         };
 162
 163         thermistor-charger {
 164                 compatible = "murata,ncp03wf104";
 165                 pullup-uv = <1800000>;
 166                 pullup-ohm = <100000>;
 167                 pulldown-ohm = <0>;
 168                 io-channels = <&adc 2>;
 169         };
 170 };
 171
 172 &bus_g2d_400 {
 173         devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
 174         vdd-supply = <&buck4_reg>;
 175         exynos,saturation-ratio = <10>;
 176         status = "okay";
 177 };
 178
 179 &bus_g2d_266 {
 180         devfreq = <&bus_g2d_400>;
 181         status = "okay";
 182 };
 183
 184 &bus_gscl {
 185         devfreq = <&bus_g2d_400>;
 186         status = "okay";
 187 };
 188
 189 &bus_hevc {
 190         devfreq = <&bus_g2d_400>;
 191         status = "okay";
 192 };
 193
 194 &bus_jpeg {
 195         devfreq = <&bus_g2d_400>;
 196         status = "okay";
 197 };
 198
 199 &bus_mfc {
 200         devfreq = <&bus_g2d_400>;
 201         status = "okay";
 202 };
 203
 204 &bus_mscl {
 205         devfreq = <&bus_g2d_400>;
 206         status = "okay";
 207 };
 208
 209 &bus_noc0 {
 210         devfreq = <&bus_g2d_400>;
 211         status = "okay";
 212 };
 213
 214 &bus_noc1 {
 215         devfreq = <&bus_g2d_400>;
 216         status = "okay";
 217 };
 218
 219 &bus_noc2 {
 220         devfreq = <&bus_g2d_400>;
 221         status = "okay";
 222 };
 223
 224 &cmu_aud {
 225         assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 226                 <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
 227                 <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
 228                 <&cmu_top CLK_MOUT_AUD_PLL>,
 229                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 230                 <&cmu_top CLK_MOUT_SCLK_AUDIO0>,
 231                 <&cmu_top CLK_MOUT_SCLK_AUDIO1>,
 232                 <&cmu_top CLK_MOUT_SCLK_SPDIF>,
 233
 234                 <&cmu_aud CLK_DIV_AUD_CA5>,
 235                 <&cmu_aud CLK_DIV_ACLK_AUD>,
 236                 <&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
 237                 <&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
 238                 <&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
 239                 <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
 240                 <&cmu_aud CLK_DIV_SCLK_AUD_UART>,
 241                 <&cmu_top CLK_DIV_SCLK_AUDIO0>,
 242                 <&cmu_top CLK_DIV_SCLK_AUDIO1>,
 243                 <&cmu_top CLK_DIV_SCLK_PCM1>,
 244                 <&cmu_top CLK_DIV_SCLK_I2S1>;
 245
 246         assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
 247                 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 248                 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 249                 <&cmu_top CLK_FOUT_AUD_PLL>,
 250                 <&cmu_top CLK_MOUT_AUD_PLL>,
 251                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 252                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 253                 <&cmu_top CLK_SCLK_AUDIO0>;
 254
 255         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
 256                 <196608001>, <65536001>, <32768001>, <49152001>,
 257                 <2048001>, <24576001>, <196608001>,
 258                 <24576001>, <98304001>, <2048001>, <49152001>;
 259 };
 260
 261 &cmu_fsys {
 262         assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
 263                 <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
 264                 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
 265                 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
 266                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
 267                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
 268                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
 269                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
 270                 <&cmu_top CLK_DIV_SCLK_USBDRD30>,
 271                 <&cmu_top CLK_DIV_SCLK_USBHOST30>;
 272         assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 273                 <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 274                 <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
 275                 <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
 276                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
 277                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
 278                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
 279                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
 280         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
 281                                <66700000>, <66700000>;
 282 };
 283
 284 &cmu_gscl {
 285         assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
 286                           <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
 287         assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
 288                                  <&cmu_top CLK_ACLK_GSCL_333>;
 289 };
 290
 291 &cmu_mfc {
 292         assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
 293         assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
 294 };
 295
 296 &cmu_mif {
 297         assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>;
 298         assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>;
 299         assigned-clock-rates = <0>, <333000000>;
 300 };
 301
 302 &cmu_mscl {
 303         assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
 304                           <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 305                           <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
 306                           <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
 307         assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
 308                                  <&cmu_top CLK_SCLK_JPEG_MSCL>,
 309                                  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 310                                  <&cmu_top CLK_MOUT_BUS_PLL_USER>;
 311 };
 312
 313 &cmu_top {
 314         assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
 315         assigned-clock-rates = <196608001>;
 316 };
 317
 318 &cpu0 {
 319         cpu-supply = <&buck3_reg>;
 320 };
 321
 322 &cpu4 {
 323         cpu-supply = <&buck2_reg>;
 324 };
 325
 326 &decon {
 327         status = "okay";
 328 };
 329
 330 &decon_tv {
 331         status = "okay";
 332
 333         ports {
 334                 #address-cells = <1>;
 335                 #size-cells = <0>;
 336
 337                 port@0 {
 338                         reg = <0>;
 339                         tv_to_hdmi: endpoint {
 340                                 remote-endpoint = <&hdmi_to_tv>;
 341                         };
 342                 };
 343         };
 344 };
 345
 346 &dsi {
 347         status = "okay";
 348         vddcore-supply = <&ldo6_reg>;
 349         vddio-supply = <&ldo7_reg>;
 350         samsung,burst-clock-frequency = <512000000>;
 351         samsung,esc-clock-frequency = <16000000>;
 352         samsung,pll-clock-frequency = <24000000>;
 353         pinctrl-names = "default";
 354         pinctrl-0 = <&te_irq>;
 355 };
 356
 357 &gpu {
 358         mali-supply = <&buck6_reg>;
 359         status = "okay";
 360 };
 361
 362 &hdmi {
 363         hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
 364         status = "okay";
 365         vdd-supply = <&ldo6_reg>;
 366         vdd_osc-supply = <&ldo7_reg>;
 367         vdd_pll-supply = <&ldo6_reg>;
 368
 369         ports {
 370                 #address-cells = <1>;
 371                 #size-cells = <0>;
 372
 373                 port@0 {
 374                         reg = <0>;
 375                         hdmi_to_tv: endpoint {
 376                                 remote-endpoint = <&tv_to_hdmi>;
 377                         };
 378                 };
 379
 380                 port@1 {
 381                         reg = <1>;
 382                         hdmi_to_mhl: endpoint {
 383                                 remote-endpoint = <&mhl_to_hdmi>;
 384                         };
 385                 };
 386         };
 387 };
 388
 389 &hsi2c_0 {
 390         status = "okay";
 391         clock-frequency = <2500000>;
 392
 393         pmic@66 {
 394                 compatible = "samsung,s2mps13-pmic";
 395                 interrupt-parent = <&gpa0>;
 396                 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 397                 reg = <0x66>;
 398                 samsung,s2mps11-wrstbi-ground;
 399                 wakeup-source;
 400
 401                 s2mps13_osc: clocks {
 402                         compatible = "samsung,s2mps13-clk";
 403                         #clock-cells = <1>;
 404                         clock-output-names = "s2mps13_ap", "s2mps13_cp",
 405                                 "s2mps13_bt";
 406                 };
 407
 408                 regulators {
 409                         ldo1_reg: LDO1 {
 410                                 regulator-name = "VDD_ALIVE_0.9V_AP";
 411                                 regulator-min-microvolt = <900000>;
 412                                 regulator-max-microvolt = <900000>;
 413                                 regulator-always-on;
 414                         };
 415
 416                         ldo2_reg: LDO2 {
 417                                 regulator-name = "VDDQ_MMC2_2.8V_AP";
 418                                 regulator-min-microvolt = <2800000>;
 419                                 regulator-max-microvolt = <2800000>;
 420                                 regulator-always-on;
 421                                 regulator-state-mem {
 422                                         regulator-off-in-suspend;
 423                                 };
 424                         };
 425
 426                         ldo3_reg: LDO3 {
 427                                 regulator-name = "VDD1_E_1.8V_AP";
 428                                 regulator-min-microvolt = <1800000>;
 429                                 regulator-max-microvolt = <1800000>;
 430                                 regulator-always-on;
 431                         };
 432
 433                         ldo4_reg: LDO4 {
 434                                 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
 435                                 regulator-min-microvolt = <1300000>;
 436                                 regulator-max-microvolt = <1300000>;
 437                                 regulator-always-on;
 438                                 regulator-state-mem {
 439                                         regulator-off-in-suspend;
 440                                 };
 441                         };
 442
 443                         ldo5_reg: LDO5 {
 444                                 regulator-name = "VDD10_DPLL_1.0V_AP";
 445                                 regulator-min-microvolt = <1000000>;
 446                                 regulator-max-microvolt = <1000000>;
 447                                 regulator-always-on;
 448                                 regulator-state-mem {
 449                                         regulator-off-in-suspend;
 450                                 };
 451                         };
 452
 453                         ldo6_reg: LDO6 {
 454                                 regulator-name = "VDD10_MIPI2L_1.0V_AP";
 455                                 regulator-min-microvolt = <1000000>;
 456                                 regulator-max-microvolt = <1000000>;
 457                                 regulator-state-mem {
 458                                         regulator-off-in-suspend;
 459                                 };
 460                         };
 461
 462                         ldo7_reg: LDO7 {
 463                                 regulator-name = "VDD18_MIPI2L_1.8V_AP";
 464                                 regulator-min-microvolt = <1800000>;
 465                                 regulator-max-microvolt = <1800000>;
 466                                 regulator-always-on;
 467                                 regulator-state-mem {
 468                                         regulator-off-in-suspend;
 469                                 };
 470                         };
 471
 472                         ldo8_reg: LDO8 {
 473                                 regulator-name = "VDD18_LLI_1.8V_AP";
 474                                 regulator-min-microvolt = <1800000>;
 475                                 regulator-max-microvolt = <1800000>;
 476                                 regulator-always-on;
 477                                 regulator-state-mem {
 478                                         regulator-off-in-suspend;
 479                                 };
 480                         };
 481
 482                         ldo9_reg: LDO9 {
 483                                 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
 484                                 regulator-min-microvolt = <1800000>;
 485                                 regulator-max-microvolt = <1800000>;
 486                                 regulator-always-on;
 487                                 regulator-state-mem {
 488                                         regulator-off-in-suspend;
 489                                 };
 490                         };
 491
 492                         ldo10_reg: LDO10 {
 493                                 regulator-name = "VDD33_USB30_3.0V_AP";
 494                                 regulator-min-microvolt = <3000000>;
 495                                 regulator-max-microvolt = <3000000>;
 496                                 regulator-state-mem {
 497                                         regulator-off-in-suspend;
 498                                 };
 499                         };
 500
 501                         ldo11_reg: LDO11 {
 502                                 regulator-name = "VDD_INT_M_1.0V_AP";
 503                                 regulator-min-microvolt = <1000000>;
 504                                 regulator-max-microvolt = <1000000>;
 505                                 regulator-always-on;
 506                                 regulator-state-mem {
 507                                         regulator-off-in-suspend;
 508                                 };
 509                         };
 510
 511                         ldo12_reg: LDO12 {
 512                                 regulator-name = "VDD_KFC_M_1.1V_AP";
 513                                 regulator-min-microvolt = <800000>;
 514                                 regulator-max-microvolt = <1350000>;
 515                                 regulator-always-on;
 516                         };
 517
 518                         ldo13_reg: LDO13 {
 519                                 regulator-name = "VDD_G3D_M_0.95V_AP";
 520                                 regulator-min-microvolt = <950000>;
 521                                 regulator-max-microvolt = <950000>;
 522                                 regulator-always-on;
 523                                 regulator-state-mem {
 524                                         regulator-off-in-suspend;
 525                                 };
 526                         };
 527
 528                         ldo14_reg: LDO14 {
 529                                 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
 530                                 regulator-min-microvolt = <1200000>;
 531                                 regulator-max-microvolt = <1200000>;
 532                                 regulator-always-on;
 533                                 regulator-state-mem {
 534                                         regulator-off-in-suspend;
 535                                 };
 536                         };
 537
 538                         ldo15_reg: LDO15 {
 539                                 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
 540                                 regulator-min-microvolt = <1200000>;
 541                                 regulator-max-microvolt = <1200000>;
 542                                 regulator-always-on;
 543                                 regulator-state-mem {
 544                                         regulator-off-in-suspend;
 545                                 };
 546                         };
 547
 548                         ldo16_reg: LDO16 {
 549                                 regulator-name = "VDDQ_EFUSE";
 550                                 regulator-min-microvolt = <1400000>;
 551                                 regulator-max-microvolt = <3400000>;
 552                                 regulator-always-on;
 553                         };
 554
 555                         ldo17_reg: LDO17 {
 556                                 regulator-name = "V_TFLASH_2.8V_AP";
 557                                 regulator-min-microvolt = <2800000>;
 558                                 regulator-max-microvolt = <2800000>;
 559                         };
 560
 561                         ldo18_reg: LDO18 {
 562                                 regulator-name = "V_CODEC_1.8V_AP";
 563                                 regulator-min-microvolt = <1800000>;
 564                                 regulator-max-microvolt = <1800000>;
 565                         };
 566
 567                         ldo19_reg: LDO19 {
 568                                 regulator-name = "VDDA_1.8V_COMP";
 569                                 regulator-min-microvolt = <1800000>;
 570                                 regulator-max-microvolt = <1800000>;
 571                                 regulator-always-on;
 572                         };
 573
 574                         ldo20_reg: LDO20 {
 575                                 regulator-name = "VCC_2.8V_AP";
 576                                 regulator-min-microvolt = <2800000>;
 577                                 regulator-max-microvolt = <2800000>;
 578                                 regulator-always-on;
 579                         };
 580
 581                         ldo21_reg: LDO21 {
 582                                 regulator-name = "VT_CAM_1.8V";
 583                                 regulator-min-microvolt = <1800000>;
 584                                 regulator-max-microvolt = <1800000>;
 585                         };
 586
 587                         ldo22_reg: LDO22 {
 588                                 regulator-name = "CAM_IO_1.8V_AP";
 589                                 regulator-min-microvolt = <1800000>;
 590                                 regulator-max-microvolt = <1800000>;
 591                         };
 592
 593                         ldo23_reg: LDO23 {
 594                                 regulator-name = "CAM_SEN_CORE_1.05V_AP";
 595                                 regulator-min-microvolt = <1050000>;
 596                                 regulator-max-microvolt = <1050000>;
 597                         };
 598
 599                         ldo24_reg: LDO24 {
 600                                 regulator-name = "VT_CAM_1.2V";
 601                                 regulator-min-microvolt = <1200000>;
 602                                 regulator-max-microvolt = <1200000>;
 603                         };
 604
 605                         ldo25_reg: LDO25 {
 606                                 regulator-name = "UNUSED_LDO25";
 607                                 regulator-min-microvolt = <2800000>;
 608                                 regulator-max-microvolt = <2800000>;
 609                         };
 610
 611                         ldo26_reg: LDO26 {
 612                                 regulator-name = "CAM_AF_2.8V_AP";
 613                                 regulator-min-microvolt = <2800000>;
 614                                 regulator-max-microvolt = <2800000>;
 615                         };
 616
 617                         ldo27_reg: LDO27 {
 618                                 regulator-name = "VCC_3.0V_LCD_AP";
 619                                 regulator-min-microvolt = <3000000>;
 620                                 regulator-max-microvolt = <3000000>;
 621                         };
 622
 623                         ldo28_reg: LDO28 {
 624                                 regulator-name = "VCC_1.8V_LCD_AP";
 625                                 regulator-min-microvolt = <1800000>;
 626                                 regulator-max-microvolt = <1800000>;
 627                         };
 628
 629                         ldo29_reg: LDO29 {
 630                                 regulator-name = "VT_CAM_2.8V";
 631                                 regulator-min-microvolt = <3000000>;
 632                                 regulator-max-microvolt = <3000000>;
 633                         };
 634
 635                         ldo30_reg: LDO30 {
 636                                 regulator-name = "TSP_AVDD_3.3V_AP";
 637                                 regulator-min-microvolt = <3300000>;
 638                                 regulator-max-microvolt = <3300000>;
 639                         };
 640
 641                         ldo31_reg: LDO31 {
 642                                 /*
 643                                  * LDO31 differs from target to target,
 644                                  * its definition is in the .dts
 645                                  */
 646                         };
 647
 648                         ldo32_reg: LDO32 {
 649                                 regulator-name = "VTOUCH_1.8V_AP";
 650                                 regulator-min-microvolt = <1800000>;
 651                                 regulator-max-microvolt = <1800000>;
 652                         };
 653
 654                         ldo33_reg: LDO33 {
 655                                 regulator-name = "VTOUCH_LED_3.3V";
 656                                 regulator-min-microvolt = <2500000>;
 657                                 regulator-max-microvolt = <3300000>;
 658                                 regulator-ramp-delay = <12500>;
 659                         };
 660
 661                         ldo34_reg: LDO34 {
 662                                 regulator-name = "VCC_1.8V_MHL_AP";
 663                                 regulator-min-microvolt = <1000000>;
 664                                 regulator-max-microvolt = <2100000>;
 665                         };
 666
 667                         ldo35_reg: LDO35 {
 668                                 regulator-name = "OIS_VM_2.8V";
 669                                 regulator-min-microvolt = <1800000>;
 670                                 regulator-max-microvolt = <2800000>;
 671                         };
 672
 673                         ldo36_reg: LDO36 {
 674                                 regulator-name = "VSIL_1.0V";
 675                                 regulator-min-microvolt = <1000000>;
 676                                 regulator-max-microvolt = <1000000>;
 677                         };
 678
 679                         ldo37_reg: LDO37 {
 680                                 regulator-name = "VF_1.8V";
 681                                 regulator-min-microvolt = <1800000>;
 682                                 regulator-max-microvolt = <1800000>;
 683                         };
 684
 685                         ldo38_reg: LDO38 {
 686                                 /*
 687                                  * LDO38 differs from target to target,
 688                                  * its definition is in the .dts
 689                                  */
 690                         };
 691
 692                         ldo39_reg: LDO39 {
 693                                 regulator-name = "V_HRM_1.8V";
 694                                 regulator-min-microvolt = <1800000>;
 695                                 regulator-max-microvolt = <1800000>;
 696                         };
 697
 698                         ldo40_reg: LDO40 {
 699                                 regulator-name = "V_HRM_3.3V";
 700                                 regulator-min-microvolt = <3300000>;
 701                                 regulator-max-microvolt = <3300000>;
 702                         };
 703
 704                         buck1_reg: BUCK1 {
 705                                 regulator-name = "VDD_MIF_0.9V_AP";
 706                                 regulator-min-microvolt = <600000>;
 707                                 regulator-max-microvolt = <1500000>;
 708                                 regulator-always-on;
 709                                 regulator-state-mem {
 710                                         regulator-off-in-suspend;
 711                                 };
 712                         };
 713
 714                         buck2_reg: BUCK2 {
 715                                 regulator-name = "VDD_EGL_1.0V_AP";
 716                                 regulator-min-microvolt = <900000>;
 717                                 regulator-max-microvolt = <1300000>;
 718                                 regulator-always-on;
 719                                 regulator-state-mem {
 720                                         regulator-off-in-suspend;
 721                                 };
 722                         };
 723
 724                         buck3_reg: BUCK3 {
 725                                 regulator-name = "VDD_KFC_1.0V_AP";
 726                                 regulator-min-microvolt = <800000>;
 727                                 regulator-max-microvolt = <1200000>;
 728                                 regulator-always-on;
 729                                 regulator-state-mem {
 730                                         regulator-off-in-suspend;
 731                                 };
 732                         };
 733
 734                         buck4_reg: BUCK4 {
 735                                 regulator-name = "VDD_INT_0.95V_AP";
 736                                 regulator-min-microvolt = <600000>;
 737                                 regulator-max-microvolt = <1500000>;
 738                                 regulator-always-on;
 739                                 regulator-state-mem {
 740                                         regulator-off-in-suspend;
 741                                 };
 742                         };
 743
 744                         buck5_reg: BUCK5 {
 745                                 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
 746                                 regulator-min-microvolt = <600000>;
 747                                 regulator-max-microvolt = <1500000>;
 748                                 regulator-always-on;
 749                                 regulator-state-mem {
 750                                         regulator-off-in-suspend;
 751                                 };
 752                         };
 753
 754                         buck6_reg: BUCK6 {
 755                                 regulator-name = "VDD_G3D_0.9V_AP";
 756                                 regulator-min-microvolt = <600000>;
 757                                 regulator-max-microvolt = <1500000>;
 758                                 regulator-always-on;
 759                                 regulator-state-mem {
 760                                         regulator-off-in-suspend;
 761                                 };
 762                         };
 763
 764                         buck7_reg: BUCK7 {
 765                                 regulator-name = "VDD_MEM1_1.2V_AP";
 766                                 regulator-min-microvolt = <1200000>;
 767                                 regulator-max-microvolt = <1200000>;
 768                                 regulator-always-on;
 769                         };
 770
 771                         buck8_reg: BUCK8 {
 772                                 regulator-name = "VDD_LLDO_1.35V_AP";
 773                                 regulator-min-microvolt = <1350000>;
 774                                 regulator-max-microvolt = <3300000>;
 775                                 regulator-always-on;
 776                         };
 777
 778                         buck9_reg: BUCK9 {
 779                                 regulator-name = "VDD_MLDO_2.0V_AP";
 780                                 regulator-min-microvolt = <1350000>;
 781                                 regulator-max-microvolt = <3300000>;
 782                                 regulator-always-on;
 783                         };
 784
 785                         buck10_reg: BUCK10 {
 786                                 regulator-name = "vdd_mem2";
 787                                 regulator-min-microvolt = <550000>;
 788                                 regulator-max-microvolt = <1500000>;
 789                                 regulator-always-on;
 790                         };
 791                 };
 792         };
 793 };
 794
 795 &hsi2c_4 {
 796         status = "okay";
 797
 798         s3fwrn5: nfc@27 {
 799                 compatible = "samsung,s3fwrn5-i2c";
 800                 reg = <0x27>;
 801                 interrupt-parent = <&gpa1>;
 802                 interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 803                 en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>;
 804                 wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
 805         };
 806 };
 807
 808 &hsi2c_5 {
 809         status = "okay";
 810
 811         stmfts: touchscreen@49 {
 812                 compatible = "st,stmfts";
 813                 reg = <0x49>;
 814                 interrupt-parent = <&gpa1>;
 815                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 816                 avdd-supply = <&ldo30_reg>;
 817                 vdd-supply = <&ldo31_reg>;
 818         };
 819 };
 820
 821 &hsi2c_7 {
 822         status = "okay";
 823         clock-frequency = <1000000>;
 824
 825         bridge@39 {
 826                 reg = <0x39>;
 827                 compatible = "sil,sii8620";
 828                 cvcc10-supply = <&ldo36_reg>;
 829                 iovcc18-supply = <&ldo34_reg>;
 830                 interrupt-parent = <&gpf0>;
 831                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 832                 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
 833                 clocks = <&pmu_system_controller 0>;
 834                 clock-names = "xtal";
 835
 836                 ports {
 837                         #address-cells = <1>;
 838                         #size-cells = <0>;
 839
 840                         port@0 {
 841                                 reg = <0>;
 842                                 mhl_to_hdmi: endpoint {
 843                                         remote-endpoint = <&hdmi_to_mhl>;
 844                                 };
 845                         };
 846
 847                         port@1 {
 848                                 reg = <1>;
 849                                 mhl_to_musb_con: endpoint {
 850                                         remote-endpoint = <&musb_con_to_mhl>;
 851                                 };
 852                         };
 853                 };
 854         };
 855 };
 856
 857 &hsi2c_8 {
 858         status = "okay";
 859
 860         pmic@66 {
 861                 compatible = "maxim,max77843";
 862                 interrupt-parent = <&gpa1>;
 863                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 864                 reg = <0x66>;
 865
 866                 muic: extcon {
 867                         compatible = "maxim,max77843-muic";
 868
 869                         musb_con: connector {
 870                                 compatible = "samsung,usb-connector-11pin",
 871                                              "usb-b-connector";
 872                                 label = "micro-USB";
 873                                 type = "micro";
 874
 875                                 ports {
 876                                         #address-cells = <1>;
 877                                         #size-cells = <0>;
 878
 879                                         port@0 {
 880                                                 /*
 881                                                  * TODO: The DTS this is based on does not have
 882                                                  * port@0 which is a required property. The ports
 883                                                  * look incomplete and need fixing.
 884                                                  * Add a disabled port just to satisfy dtschema.
 885                                                  */
 886                                                 reg = <0>;
 887                                                 status = "disabled";
 888                                         };
 889
 890                                         port@3 {
 891                                                 reg = <3>;
 892                                                 musb_con_to_mhl: endpoint {
 893                                                         remote-endpoint = <&mhl_to_musb_con>;
 894                                                 };
 895                                         };
 896                                 };
 897                         };
 898
 899                         ports {
 900                                 port {
 901                                         muic_to_usb: endpoint {
 902                                                 remote-endpoint = <&usb_to_muic>;
 903                                         };
 904                                 };
 905                         };
 906                 };
 907
 908                 regulators {
 909                         compatible = "maxim,max77843-regulator";
 910                         safeout1_reg: SAFEOUT1 {
 911                                 regulator-name = "SAFEOUT1";
 912                                 regulator-min-microvolt = <3300000>;
 913                                 regulator-max-microvolt = <4950000>;
 914                         };
 915
 916                         safeout2_reg: SAFEOUT2 {
 917                                 regulator-name = "SAFEOUT2";
 918                                 regulator-min-microvolt = <3300000>;
 919                                 regulator-max-microvolt = <4950000>;
 920                         };
 921
 922                         charger_reg: CHARGER {
 923                                 regulator-name = "CHARGER";
 924                                 regulator-min-microamp = <100000>;
 925                                 regulator-max-microamp = <3150000>;
 926                         };
 927                 };
 928
 929                 haptic: motor-driver {
 930                         compatible = "maxim,max77843-haptic";
 931                         haptic-supply = <&ldo38_reg>;
 932                         pwms = <&pwm 0 33670 0>;
 933                 };
 934         };
 935 };
 936
 937 &hsi2c_11 {
 938         status = "okay";
 939 };
 940
 941 &i2s0 {
 942         status = "okay";
 943 };
 944
 945 &i2s1 {
 946         assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
 947         assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
 948         status = "okay";
 949 };
 950
 951 &mshc_0 {
 952         status = "okay";
 953         mmc-ddr-1_8v;
 954         mmc-hs200-1_8v;
 955         mmc-hs400-1_8v;
 956         cap-mmc-highspeed;
 957         non-removable;
 958         card-detect-delay = <200>;
 959         samsung,dw-mshc-ciu-div = <3>;
 960         samsung,dw-mshc-sdr-timing = <0 4>;
 961         samsung,dw-mshc-ddr-timing = <0 2>;
 962         samsung,dw-mshc-hs400-timing = <0 3>;
 963         samsung,read-strobe-delay = <90>;
 964         fifo-depth = <0x80>;
 965         pinctrl-names = "default";
 966         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
 967                         &sd0_bus8 &sd0_rdqs>;
 968         bus-width = <8>;
 969         assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
 970         assigned-clock-rates = <800000000>;
 971 };
 972
 973 &mshc_2 {
 974         status = "okay";
 975         cap-sd-highspeed;
 976         disable-wp;
 977         cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
 978         card-detect-delay = <200>;
 979         samsung,dw-mshc-ciu-div = <3>;
 980         samsung,dw-mshc-sdr-timing = <0 4>;
 981         samsung,dw-mshc-ddr-timing = <0 2>;
 982         fifo-depth = <0x80>;
 983         pinctrl-names = "default";
 984         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
 985         bus-width = <4>;
 986 };
 987
 988 &pcie {
 989         status = "okay";
 990         pinctrl-names = "default";
 991         pinctrl-0 = <&pcie_bus &pcie_wlanen>;
 992         vdd10-supply = <&ldo6_reg>;
 993         vdd18-supply = <&ldo7_reg>;
 994         assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
 995                           <&cmu_top CLK_MOUT_SCLK_PCIE_100>;
 996         assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
 997                                  <&cmu_top CLK_MOUT_BUS_PLL_USER>;
 998         assigned-clock-rates = <0>, <100000000>;
 999         interrupt-map-mask = <0 0 0 0>;
1000         interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
1001 };
1002
1003 &pcie_phy {
1004         status = "okay";
1005 };
1006
1007 &ppmu_d0_general {
1008         status = "okay";
1009         events {
1010                 ppmu_event0_d0_general: ppmu-event0-d0-general {
1011                         event-name = "ppmu-event0-d0-general";
1012                 };
1013         };
1014 };
1015
1016 &ppmu_d1_general {
1017         status = "okay";
1018         events {
1019                 ppmu_event0_d1_general: ppmu-event0-d1-general {
1020                        event-name = "ppmu-event0-d1-general";
1021                };
1022         };
1023 };
1024
1025 &pinctrl_alive {
1026         pinctrl-names = "default";
1027         pinctrl-0 = <&initial_alive>;
1028
1029         initial_alive: initial-state {
1030                 PIN_IN(gpa0-0, DOWN, FAST_SR1);
1031                 PIN_IN(gpa0-1, NONE, FAST_SR1);
1032                 PIN_IN(gpa0-2, DOWN, FAST_SR1);
1033                 PIN_IN(gpa0-3, NONE, FAST_SR1);
1034                 PIN_IN(gpa0-4, NONE, FAST_SR1);
1035                 PIN_IN(gpa0-5, DOWN, FAST_SR1);
1036                 PIN_IN(gpa0-6, NONE, FAST_SR1);
1037                 PIN_IN(gpa0-7, NONE, FAST_SR1);
1038
1039                 PIN_IN(gpa1-0, UP, FAST_SR1);
1040                 PIN_IN(gpa1-1, UP, FAST_SR1);
1041                 PIN_IN(gpa1-2, NONE, FAST_SR1);
1042                 PIN_IN(gpa1-3, DOWN, FAST_SR1);
1043                 PIN_IN(gpa1-4, DOWN, FAST_SR1);
1044                 PIN_IN(gpa1-5, NONE, FAST_SR1);
1045                 PIN_IN(gpa1-6, NONE, FAST_SR1);
1046                 PIN_IN(gpa1-7, NONE, FAST_SR1);
1047
1048                 PIN_IN(gpa2-0, NONE, FAST_SR1);
1049                 PIN_IN(gpa2-1, NONE, FAST_SR1);
1050                 PIN_IN(gpa2-2, NONE, FAST_SR1);
1051                 PIN_IN(gpa2-3, DOWN, FAST_SR1);
1052                 PIN_IN(gpa2-4, NONE, FAST_SR1);
1053                 PIN_IN(gpa2-5, DOWN, FAST_SR1);
1054                 PIN_IN(gpa2-6, DOWN, FAST_SR1);
1055                 PIN_IN(gpa2-7, NONE, FAST_SR1);
1056
1057                 PIN_IN(gpa3-0, DOWN, FAST_SR1);
1058                 PIN_IN(gpa3-1, DOWN, FAST_SR1);
1059                 PIN_IN(gpa3-2, NONE, FAST_SR1);
1060                 PIN_IN(gpa3-3, DOWN, FAST_SR1);
1061                 PIN_IN(gpa3-4, NONE, FAST_SR1);
1062                 PIN_IN(gpa3-5, DOWN, FAST_SR1);
1063                 PIN_IN(gpa3-6, DOWN, FAST_SR1);
1064                 PIN_IN(gpa3-7, DOWN, FAST_SR1);
1065
1066                 PIN_IN(gpf1-0, NONE, FAST_SR1);
1067                 PIN_IN(gpf1-1, NONE, FAST_SR1);
1068                 PIN_IN(gpf1-2, DOWN, FAST_SR1);
1069                 PIN_IN(gpf1-4, UP, FAST_SR1);
1070                 PIN_OT(gpf1-5, NONE, FAST_SR1);
1071                 PIN_IN(gpf1-6, DOWN, FAST_SR1);
1072                 PIN_IN(gpf1-7, DOWN, FAST_SR1);
1073
1074                 PIN_IN(gpf2-0, DOWN, FAST_SR1);
1075                 PIN_IN(gpf2-1, DOWN, FAST_SR1);
1076                 PIN_IN(gpf2-2, DOWN, FAST_SR1);
1077                 PIN_IN(gpf2-3, DOWN, FAST_SR1);
1078
1079                 PIN_IN(gpf3-0, DOWN, FAST_SR1);
1080                 PIN_IN(gpf3-1, DOWN, FAST_SR1);
1081                 PIN_IN(gpf3-2, NONE, FAST_SR1);
1082                 PIN_IN(gpf3-3, DOWN, FAST_SR1);
1083
1084                 PIN_IN(gpf4-0, DOWN, FAST_SR1);
1085                 PIN_IN(gpf4-1, DOWN, FAST_SR1);
1086                 PIN_IN(gpf4-2, DOWN, FAST_SR1);
1087                 PIN_IN(gpf4-3, DOWN, FAST_SR1);
1088                 PIN_IN(gpf4-4, DOWN, FAST_SR1);
1089                 PIN_IN(gpf4-5, DOWN, FAST_SR1);
1090                 PIN_IN(gpf4-6, DOWN, FAST_SR1);
1091                 PIN_IN(gpf4-7, DOWN, FAST_SR1);
1092
1093                 PIN_IN(gpf5-0, DOWN, FAST_SR1);
1094                 PIN_IN(gpf5-1, DOWN, FAST_SR1);
1095                 PIN_IN(gpf5-2, DOWN, FAST_SR1);
1096                 PIN_IN(gpf5-3, DOWN, FAST_SR1);
1097                 PIN_OT(gpf5-4, NONE, FAST_SR1);
1098                 PIN_IN(gpf5-5, DOWN, FAST_SR1);
1099                 PIN_IN(gpf5-6, DOWN, FAST_SR1);
1100                 PIN_IN(gpf5-7, DOWN, FAST_SR1);
1101         };
1102
1103         te_irq: te-irq-pins {
1104                 samsung,pins = "gpf1-3";
1105                 samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
1106         };
1107 };
1108
1109 &pinctrl_cpif {
1110         pinctrl-names = "default";
1111         pinctrl-0 = <&initial_cpif>;
1112
1113         initial_cpif: initial-state {
1114                 PIN_IN(gpv6-0, DOWN, FAST_SR1);
1115                 PIN_IN(gpv6-1, DOWN, FAST_SR1);
1116         };
1117 };
1118
1119 &pinctrl_ese {
1120         pinctrl-names = "default";
1121         pinctrl-0 = <&initial_ese>;
1122
1123         pcie_wlanen: pcie-wlanen-pins {
1124                 samsung,pins = "gpj2-0";
1125                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
1126                 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
1127                 samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
1128         };
1129
1130         initial_ese: initial-state {
1131                 PIN_IN(gpj2-1, DOWN, FAST_SR1);
1132                 PIN_IN(gpj2-2, DOWN, FAST_SR1);
1133         };
1134 };
1135
1136 &pinctrl_fsys {
1137         pinctrl-names = "default";
1138         pinctrl-0 = <&initial_fsys>;
1139
1140         initial_fsys: initial-state {
1141                 PIN_IN(gpr3-0, NONE, FAST_SR1);
1142                 PIN_IN(gpr3-1, DOWN, FAST_SR1);
1143                 PIN_IN(gpr3-2, DOWN, FAST_SR1);
1144                 PIN_IN(gpr3-3, DOWN, FAST_SR1);
1145                 PIN_IN(gpr3-7, NONE, FAST_SR1);
1146         };
1147 };
1148
1149 &pinctrl_imem {
1150         pinctrl-names = "default";
1151         pinctrl-0 = <&initial_imem>;
1152
1153         initial_imem: initial-state {
1154                 PIN_IN(gpf0-0, UP, FAST_SR1);
1155                 PIN_IN(gpf0-1, UP, FAST_SR1);
1156                 PIN_IN(gpf0-2, DOWN, FAST_SR1);
1157                 PIN_IN(gpf0-3, UP, FAST_SR1);
1158                 PIN_IN(gpf0-4, DOWN, FAST_SR1);
1159                 PIN_IN(gpf0-5, NONE, FAST_SR1);
1160                 PIN_IN(gpf0-6, DOWN, FAST_SR1);
1161                 PIN_IN(gpf0-7, UP, FAST_SR1);
1162         };
1163 };
1164
1165 &pinctrl_nfc {
1166         pinctrl-names = "default";
1167         pinctrl-0 = <&initial_nfc>;
1168
1169         initial_nfc: initial-state {
1170                 PIN_IN(gpj0-2, DOWN, FAST_SR1);
1171         };
1172 };
1173
1174 &pinctrl_peric {
1175         pinctrl-names = "default";
1176         pinctrl-0 = <&initial_peric>;
1177
1178         initial_peric: initial-state {
1179                 PIN_IN(gpv7-0, DOWN, FAST_SR1);
1180                 PIN_IN(gpv7-1, DOWN, FAST_SR1);
1181                 PIN_IN(gpv7-2, NONE, FAST_SR1);
1182                 PIN_IN(gpv7-3, DOWN, FAST_SR1);
1183                 PIN_IN(gpv7-4, DOWN, FAST_SR1);
1184                 PIN_IN(gpv7-5, DOWN, FAST_SR1);
1185
1186                 PIN_IN(gpb0-4, DOWN, FAST_SR1);
1187
1188                 PIN_IN(gpc0-2, DOWN, FAST_SR1);
1189                 PIN_IN(gpc0-5, DOWN, FAST_SR1);
1190                 PIN_IN(gpc0-7, DOWN, FAST_SR1);
1191
1192                 PIN_IN(gpc1-1, DOWN, FAST_SR1);
1193
1194                 PIN_IN(gpc3-4, NONE, FAST_SR1);
1195                 PIN_IN(gpc3-5, NONE, FAST_SR1);
1196                 PIN_IN(gpc3-6, NONE, FAST_SR1);
1197                 PIN_IN(gpc3-7, NONE, FAST_SR1);
1198
1199                 PIN_OT(gpg0-0, NONE, FAST_SR1);
1200                 PIN_F2(gpg0-1, DOWN, FAST_SR1);
1201
1202                 PIN_IN(gpd2-5, DOWN, FAST_SR1);
1203
1204                 PIN_IN(gpd4-0, NONE, FAST_SR1);
1205                 PIN_IN(gpd4-1, DOWN, FAST_SR1);
1206                 PIN_IN(gpd4-2, DOWN, FAST_SR1);
1207                 PIN_IN(gpd4-3, DOWN, FAST_SR1);
1208                 PIN_IN(gpd4-4, DOWN, FAST_SR1);
1209
1210                 PIN_IN(gpd6-3, DOWN, FAST_SR1);
1211
1212                 PIN_IN(gpd8-1, UP, FAST_SR1);
1213
1214                 PIN_IN(gpg1-0, DOWN, FAST_SR1);
1215                 PIN_IN(gpg1-1, DOWN, FAST_SR1);
1216                 PIN_IN(gpg1-2, DOWN, FAST_SR1);
1217                 PIN_IN(gpg1-3, DOWN, FAST_SR1);
1218                 PIN_IN(gpg1-4, DOWN, FAST_SR1);
1219
1220                 PIN_IN(gpg2-0, DOWN, FAST_SR1);
1221                 PIN_IN(gpg2-1, DOWN, FAST_SR1);
1222
1223                 PIN_IN(gpg3-0, DOWN, FAST_SR1);
1224                 PIN_IN(gpg3-1, DOWN, FAST_SR1);
1225                 PIN_IN(gpg3-5, DOWN, FAST_SR1);
1226         };
1227 };
1228
1229 &pinctrl_touch {
1230         pinctrl-names = "default";
1231         pinctrl-0 = <&initial_touch>;
1232
1233         initial_touch: initial-state {
1234                 PIN_IN(gpj1-2, DOWN, FAST_SR1);
1235         };
1236 };
1237
1238 &pwm {
1239         pinctrl-0 = <&pwm0_out>;
1240         pinctrl-names = "default";
1241         status = "okay";
1242 };
1243
1244 &mic {
1245         status = "okay";
1246 };
1247
1248 &pmu_system_controller {
1249         assigned-clocks = <&pmu_system_controller 0>;
1250         assigned-clock-parents = <&xxti>;
1251 };
1252
1253 &serial_1 {
1254         status = "okay";
1255 };
1256
1257 &serial_3 {
1258         status = "okay";
1259
1260         bluetooth {
1261                 compatible = "brcm,bcm43438-bt";
1262                 max-speed = <3000000>;
1263                 shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
1264                 device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>;
1265                 host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>;
1266                 clocks = <&s2mps13_osc S2MPS11_CLK_BT>;
1267                 clock-names = "extclk";
1268         };
1269 };
1270
1271 &spi_1 {
1272         cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
1273         status = "okay";
1274
1275         wm5110: audio-codec@0 {
1276                 compatible = "wlf,wm5110";
1277                 reg = <0x0>;
1278                 spi-max-frequency = <20000000>;
1279                 interrupt-parent = <&gpa0>;
1280                 interrupts = <4 IRQ_TYPE_NONE>;
1281                 clocks = <&pmu_system_controller 0>,
1282                         <&s2mps13_osc S2MPS11_CLK_BT>;
1283                 clock-names = "mclk1", "mclk2";
1284
1285                 gpio-controller;
1286                 #gpio-cells = <2>;
1287                 interrupt-controller;
1288                 #interrupt-cells = <2>;
1289
1290                 wlf,micd-detect-debounce = <300>;
1291                 wlf,micd-bias-start-time = <0x1>;
1292                 wlf,micd-rate = <0x7>;
1293                 wlf,micd-dbtime = <0x2>;
1294                 wlf,micd-force-micbias;
1295                 wlf,micd-configs = <0x0 1 0>;
1296                 wlf,hpdet-channel = <1>;
1297                 wlf,gpsw = <0x1>;
1298                 wlf,inmode = <2 0 2 0>;
1299
1300                 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
1301                 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1302
1303                 /* core supplies */
1304                 AVDD-supply = <&ldo18_reg>;
1305                 DBVDD1-supply = <&ldo18_reg>;
1306                 CPVDD-supply = <&ldo18_reg>;
1307                 DBVDD2-supply = <&ldo18_reg>;
1308                 DBVDD3-supply = <&ldo18_reg>;
1309                 SPKVDDL-supply = <&vph_pwr_regulator>;
1310                 SPKVDDR-supply = <&vph_pwr_regulator>;
1311
1312                 controller-data {
1313                         samsung,spi-feedback-delay = <0>;
1314                 };
1315         };
1316 };
1317
1318 &spi_3 {
1319         status = "okay";
1320         no-cs-readback;
1321
1322         irled@0 {
1323                 compatible = "ir-spi-led";
1324                 reg = <0x0>;
1325                 spi-max-frequency = <5000000>;
1326                 power-supply = <&irda_regulator>;
1327                 duty-cycle = /bits/ 8 <60>;
1328                 led-active-low;
1329
1330                 controller-data {
1331                         samsung,spi-feedback-delay = <0>;
1332                 };
1333         };
1334 };
1335
1336 &timer {
1337         clock-frequency = <24000000>;
1338 };
1339
1340 &tmu_atlas0 {
1341         vtmu-supply = <&ldo3_reg>;
1342         status = "okay";
1343 };
1344
1345 &tmu_apollo {
1346         vtmu-supply = <&ldo3_reg>;
1347         status = "okay";
1348 };
1349
1350 &tmu_g3d {
1351         vtmu-supply = <&ldo3_reg>;
1352         status = "okay";
1353 };
1354
1355 &usbdrd30 {
1356         vdd33-supply = <&ldo10_reg>;
1357         vdd10-supply = <&ldo6_reg>;
1358         status = "okay";
1359 };
1360
1361 &usbdrd_dwc3 {
1362         dr_mode = "otg";
1363 };
1364
1365 &usbdrd30_phy {
1366         vbus-supply = <&safeout1_reg>;
1367         status = "okay";
1368
1369         port {
1370                 usb_to_muic: endpoint {
1371                         remote-endpoint = <&muic_to_usb>;
1372                 };
1373         };
1374 };
1375
1376 &xxti {
1377         clock-frequency = <24000000>;
1378 };