1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Author: Christian Hewitt <christianshewitt@gmail.com>
8 #include "meson-gxl-s905d.dtsi"
9 #include "meson-gx-p23x-q20x.dtsi"
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
14 compatible = "osmc,vero4k-plus", "amlogic,s905d", "amlogic,meson-gxl";
15 model = "OSMC Vero 4K Plus";
18 compatible = "gpio-keys-polled";
23 linux,code = <KEY_POWER>;
24 gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
29 compatible = "gpio-leds";
32 color = <LED_COLOR_ID_RED>;
33 function = LED_FUNCTION_POWER;
34 gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_LOW>;
35 default-state = "off";
42 pinctrl-0 = <ð_pins>;
43 pinctrl-names = "default";
45 phy-mode = "rgmii-txid";
46 phy-handle = <&external_phy>;
48 amlogic,tx-delay-ns = <0>;
52 external_phy: ethernet-phy@0 {
53 /* Realtek RTL8211F (0x001cc916) */
54 pinctrl-0 = <ð_phy_irq_pin>;
55 pinctrl-names = "default";
60 reset-assert-us = <10000>;
61 reset-deassert-us = <80000>;
62 reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
64 interrupt-parent = <&gpio_intc>;
65 interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
70 /* Ensure the phy irq pin is properly configured as input */
71 eth_phy_irq_pin: eth-phy-irq {
74 function = "gpio_periphs";
84 compatible = "brcm,bcm4329-fmac";
90 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
91 pinctrl-names = "default";
95 compatible = "brcm,bcm43438-bt";
96 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
97 max-speed = <2000000>;
108 /* HDMI_5V also supplies the USB VBUS */
109 phy-supply = <&hdmi_5v>;
113 /* HDMI_5V also supplies the USB VBUS */
114 phy-supply = <&hdmi_5v>;