1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Copyright (c) 2016 Endless Computers, Inc.
4 * Author: Carlo Caione <carlo@endlessm.com>
9 #include <dt-bindings/input/input.h>
11 #include "meson-gxl-s905d.dtsi"
12 #include "meson-gx-p23x-q20x.dtsi"
15 compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl";
16 model = "Amlogic Meson GXL (S905D) P230 Development Board";
19 compatible = "adc-keys";
20 io-channels = <&saradc 0>;
21 io-channel-names = "buttons";
22 keyup-threshold-microvolt = <1710000>;
26 linux,code = <KEY_VENDOR>;
27 press-threshold-microvolt = <10000>;
32 compatible = "gpio-keys-polled";
33 poll-interval = <100>;
37 linux,code = <KEY_POWER>;
38 gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
43 compatible = "hdmi-connector";
47 hdmi_connector_in: endpoint {
48 remote-endpoint = <&hdmi_tx_tmds_out>;
56 pinctrl-0 = <&ao_cec_pins>;
57 pinctrl-names = "default";
58 hdmi-phandle = <&hdmi_tx>;
61 /* P230 has exclusive choice between internal or external PHY */
63 pinctrl-0 = <ð_pins>;
64 pinctrl-names = "default";
66 /* Select external PHY by default */
67 phy-handle = <&external_phy>;
69 amlogic,tx-delay-ns = <2>;
71 /* External PHY is in RGMII */
76 external_phy: ethernet-phy@0 {
77 /* Realtek RTL8211F (0x001cc916) */
81 /* External PHY reset is shared with internal PHY Led signal */
82 reset-assert-us = <10000>;
83 reset-deassert-us = <80000>;
84 reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
86 interrupt-parent = <&gpio_intc>;
87 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
94 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
95 pinctrl-names = "default";
99 hdmi_tx_tmds_out: endpoint {
100 remote-endpoint = <&hdmi_connector_in>;
107 compatible = "brcm,bcm4329-fmac";