1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Copyright (c) 2016 Andreas Färber
6 #include "meson-gxbb.dtsi"
9 compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
17 stdout-path = "serial0:115200n8";
21 compatible = "gpio-leds";
24 label = "vega-s95:blue:on";
25 gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
31 usb_pwr: regulator-usb-pwrs {
32 compatible = "regulator-fixed";
34 regulator-name = "USB_PWR";
36 regulator-min-microvolt = <5000000>;
37 regulator-max-microvolt = <5000000>;
39 gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
43 vddio_boot: regulator-vddio_boot {
44 compatible = "regulator-fixed";
45 regulator-name = "VDDIO_BOOT";
46 regulator-min-microvolt = <1800000>;
47 regulator-max-microvolt = <1800000>;
50 vddao_3v3: regulator-vddao_3v3 {
51 compatible = "regulator-fixed";
52 regulator-name = "VDDAO_3V3";
53 regulator-min-microvolt = <3300000>;
54 regulator-max-microvolt = <3300000>;
57 vddio_ao18: regulator-vddio_ao18 {
58 compatible = "regulator-fixed";
59 regulator-name = "VDDIO_AO18";
60 regulator-min-microvolt = <1800000>;
61 regulator-max-microvolt = <1800000>;
64 vcc_3v3: regulator-vcc_3v3 {
65 compatible = "regulator-fixed";
66 regulator-name = "VCC_3V3";
67 regulator-min-microvolt = <3300000>;
68 regulator-max-microvolt = <3300000>;
71 emmc_pwrseq: emmc-pwrseq {
72 compatible = "mmc-pwrseq-emmc";
73 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
77 compatible = "pwm-clock";
79 clock-frequency = <32768>;
80 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
84 compatible = "hdmi-connector";
88 hdmi_connector_in: endpoint {
89 remote-endpoint = <&hdmi_tx_tmds_out>;
94 sdio_pwrseq: sdio-pwrseq {
95 compatible = "mmc-pwrseq-simple";
96 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
98 clock-names = "ext_clock";
104 pinctrl-0 = <&ao_cec_pins>;
105 pinctrl-names = "default";
106 hdmi-phandle = <&hdmi_tx>;
111 pinctrl-0 = <ð_rgmii_pins>;
112 pinctrl-names = "default";
114 phy-handle = <ð_phy0>;
117 amlogic,tx-delay-ns = <2>;
120 compatible = "snps,dwmac-mdio";
121 #address-cells = <1>;
124 eth_phy0: ethernet-phy@0 {
125 /* Realtek RTL8211F (0x001cc916) */
128 reset-assert-us = <10000>;
129 reset-deassert-us = <80000>;
130 reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
132 interrupt-parent = <&gpio_intc>;
133 /* MAC_INTR on GPIOZ_15 */
134 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
141 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
142 pinctrl-names = "default";
146 hdmi_tx_tmds_out: endpoint {
147 remote-endpoint = <&hdmi_connector_in>;
153 pinctrl-0 = <&remote_input_ao_pins>;
154 pinctrl-names = "default";
159 pinctrl-0 = <&pwm_e_pins>;
160 pinctrl-names = "default";
161 clocks = <&clkc CLKID_FCLK_DIV4>;
162 clock-names = "clkin0";
167 vref-supply = <&vddio_ao18>;
170 /* Wireless SDIO Module */
173 pinctrl-0 = <&sdio_pins>;
174 pinctrl-1 = <&sdio_clk_gate_pins>;
175 pinctrl-names = "default", "clk-gate";
176 #address-cells = <1>;
181 max-frequency = <50000000>;
186 mmc-pwrseq = <&sdio_pwrseq>;
188 vmmc-supply = <&vddao_3v3>;
189 vqmmc-supply = <&vddio_boot>;
193 compatible = "brcm,bcm4329-fmac";
200 pinctrl-0 = <&sdcard_pins>;
201 pinctrl-1 = <&sdcard_clk_gate_pins>;
202 pinctrl-names = "default", "clk-gate";
206 max-frequency = <50000000>;
209 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
211 vmmc-supply = <&vddao_3v3>;
212 vqmmc-supply = <&vcc_3v3>;
218 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
219 pinctrl-1 = <&emmc_clk_gate_pins>;
220 pinctrl-names = "default", "clk-gate";
224 max-frequency = <200000000>;
230 mmc-pwrseq = <&emmc_pwrseq>;
231 vmmc-supply = <&vcc_3v3>;
232 vqmmc-supply = <&vddio_boot>;
235 /* This is connected to the Bluetooth module: */
238 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
239 pinctrl-names = "default";
242 compatible = "brcm,bcm43438-bt";
243 shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
247 /* This UART is brought out to the DB9 connector */
250 pinctrl-0 = <&uart_ao_a_pins>;
251 pinctrl-names = "default";
256 phy-supply = <&usb_pwr>;