arch/arm64/boot/dts/amlogic/meson-gx.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2016 Andreas Färber
   4  *
   5  * Copyright (c) 2016 BayLibre, SAS.
   6  * Author: Neil Armstrong <narmstrong@baylibre.com>
   7  *
   8  * Copyright (c) 2016 Endless Computers, Inc.
   9  * Author: Carlo Caione <carlo@endlessm.com>
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include <dt-bindings/interrupt-controller/arm-gic.h>
  15 #include <dt-bindings/power/meson-gxbb-power.h>
  16 #include <dt-bindings/thermal/thermal.h>
  17
  18 / {
  19         interrupt-parent = <&gic>;
  20         #address-cells = <2>;
  21         #size-cells = <2>;
  22
  23         aliases {
  24                 mmc0 = &sd_emmc_b; /* SD card */
  25                 mmc1 = &sd_emmc_c; /* eMMC */
  26                 mmc2 = &sd_emmc_a; /* SDIO */
  27         };
  28
  29         reserved-memory {
  30                 #address-cells = <2>;
  31                 #size-cells = <2>;
  32                 ranges;
  33
  34                 /* 16 MiB reserved for Hardware ROM Firmware */
  35                 hwrom_reserved: hwrom@0 {
  36                         reg = <0x0 0x0 0x0 0x1000000>;
  37                         no-map;
  38                 };
  39
  40                 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
  41                 secmon_reserved: secmon@10000000 {
  42                         reg = <0x0 0x10000000 0x0 0x200000>;
  43                         no-map;
  44                 };
  45
  46                 /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
  47                 secmon_reserved_alt: secmon@5000000 {
  48                         reg = <0x0 0x05000000 0x0 0x300000>;
  49                         no-map;
  50                 };
  51
  52                 /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
  53                 secmon_reserved_bl32: secmon@5300000 {
  54                         reg = <0x0 0x05300000 0x0 0x2000000>;
  55                         no-map;
  56                 };
  57
  58                 linux,cma {
  59                         compatible = "shared-dma-pool";
  60                         reusable;
  61                         size = <0x0 0x10000000>;
  62                         alignment = <0x0 0x400000>;
  63                         linux,cma-default;
  64                 };
  65         };
  66
  67         chosen {
  68                 #address-cells = <2>;
  69                 #size-cells = <2>;
  70                 ranges;
  71
  72                 simplefb_cvbs: framebuffer-cvbs {
  73                         compatible = "amlogic,simple-framebuffer",
  74                                      "simple-framebuffer";
  75                         amlogic,pipeline = "vpu-cvbs";
  76                         power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
  77                         status = "disabled";
  78                 };
  79
  80                 simplefb_hdmi: framebuffer-hdmi {
  81                         compatible = "amlogic,simple-framebuffer",
  82                                      "simple-framebuffer";
  83                         amlogic,pipeline = "vpu-hdmi";
  84                         power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
  85                         status = "disabled";
  86                 };
  87         };
  88
  89         cpus {
  90                 #address-cells = <0x2>;
  91                 #size-cells = <0x0>;
  92
  93                 cpu0: cpu@0 {
  94                         device_type = "cpu";
  95                         compatible = "arm,cortex-a53";
  96                         reg = <0x0 0x0>;
  97                         enable-method = "psci";
  98                         next-level-cache = <&l2>;
  99                         clocks = <&scpi_dvfs 0>;
 100                         #cooling-cells = <2>;
 101                 };
 102
 103                 cpu1: cpu@1 {
 104                         device_type = "cpu";
 105                         compatible = "arm,cortex-a53";
 106                         reg = <0x0 0x1>;
 107                         enable-method = "psci";
 108                         next-level-cache = <&l2>;
 109                         clocks = <&scpi_dvfs 0>;
 110                         #cooling-cells = <2>;
 111                 };
 112
 113                 cpu2: cpu@2 {
 114                         device_type = "cpu";
 115                         compatible = "arm,cortex-a53";
 116                         reg = <0x0 0x2>;
 117                         enable-method = "psci";
 118                         next-level-cache = <&l2>;
 119                         clocks = <&scpi_dvfs 0>;
 120                         #cooling-cells = <2>;
 121                 };
 122
 123                 cpu3: cpu@3 {
 124                         device_type = "cpu";
 125                         compatible = "arm,cortex-a53";
 126                         reg = <0x0 0x3>;
 127                         enable-method = "psci";
 128                         next-level-cache = <&l2>;
 129                         clocks = <&scpi_dvfs 0>;
 130                         #cooling-cells = <2>;
 131                 };
 132
 133                 l2: l2-cache0 {
 134                         compatible = "cache";
 135                 };
 136         };
 137
 138         thermal-zones {
 139                 cpu-thermal {
 140                         polling-delay-passive = <250>; /* milliseconds */
 141                         polling-delay = <1000>; /* milliseconds */
 142
 143                         thermal-sensors = <&scpi_sensors 0>;
 144
 145                         trips {
 146                                 cpu_passive: cpu-passive {
 147                                         temperature = <80000>; /* millicelsius */
 148                                         hysteresis = <2000>; /* millicelsius */
 149                                         type = "passive";
 150                                 };
 151
 152                                 cpu_hot: cpu-hot {
 153                                         temperature = <90000>; /* millicelsius */
 154                                         hysteresis = <2000>; /* millicelsius */
 155                                         type = "hot";
 156                                 };
 157
 158                                 cpu_critical: cpu-critical {
 159                                         temperature = <110000>; /* millicelsius */
 160                                         hysteresis = <2000>; /* millicelsius */
 161                                         type = "critical";
 162                                 };
 163                         };
 164
 165                         cpu_cooling_maps: cooling-maps {
 166                                 map0 {
 167                                         trip = <&cpu_passive>;
 168                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 169                                                          <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 170                                                          <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 171                                                          <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 172                                 };
 173
 174                                 map1 {
 175                                         trip = <&cpu_hot>;
 176                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 177                                                          <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 178                                                          <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 179                                                          <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 180                                 };
 181                         };
 182                 };
 183         };
 184
 185         arm-pmu {
 186                 compatible = "arm,cortex-a53-pmu";
 187                 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 188                              <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 189                              <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 190                              <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 191                 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 192         };
 193
 194         psci {
 195                 compatible = "arm,psci-0.2";
 196                 method = "smc";
 197         };
 198
 199         timer {
 200                 compatible = "arm,armv8-timer";
 201                 interrupts = <GIC_PPI 13
 202                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 203                              <GIC_PPI 14
 204                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 205                              <GIC_PPI 11
 206                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 207                              <GIC_PPI 10
 208                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
 209         };
 210
 211         xtal: xtal-clk {
 212                 compatible = "fixed-clock";
 213                 clock-frequency = <24000000>;
 214                 clock-output-names = "xtal";
 215                 #clock-cells = <0>;
 216         };
 217
 218         firmware {
 219                 sm: secure-monitor {
 220                         compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
 221                 };
 222         };
 223
 224         efuse: efuse {
 225                 compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
 226                 #address-cells = <1>;
 227                 #size-cells = <1>;
 228                 read-only;
 229                 secure-monitor = <&sm>;
 230
 231                 sn: sn@14 {
 232                         reg = <0x14 0x10>;
 233                 };
 234
 235                 eth_mac: eth-mac@34 {
 236                         reg = <0x34 0x10>;
 237                 };
 238
 239                 bid: bid@46 {
 240                         reg = <0x46 0x30>;
 241                 };
 242         };
 243
 244         scpi {
 245                 compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
 246                 mboxes = <&mailbox 1 &mailbox 2>;
 247                 shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
 248
 249                 scpi_clocks: clocks {
 250                         compatible = "arm,scpi-clocks";
 251
 252                         scpi_dvfs: clocks-0 {
 253                                 compatible = "arm,scpi-dvfs-clocks";
 254                                 #clock-cells = <1>;
 255                                 clock-indices = <0>;
 256                                 clock-output-names = "vcpu";
 257                         };
 258                 };
 259
 260                 scpi_sensors: sensors {
 261                         compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 262                         #thermal-sensor-cells = <1>;
 263                 };
 264         };
 265
 266         soc {
 267                 compatible = "simple-bus";
 268                 #address-cells = <2>;
 269                 #size-cells = <2>;
 270                 ranges;
 271
 272                 cbus: bus@c1100000 {
 273                         compatible = "simple-bus";
 274                         reg = <0x0 0xc1100000 0x0 0x100000>;
 275                         #address-cells = <2>;
 276                         #size-cells = <2>;
 277                         ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
 278
 279                         gpio_intc: interrupt-controller@9880 {
 280                                 compatible = "amlogic,meson-gpio-intc";
 281                                 reg = <0x0 0x9880 0x0 0x10>;
 282                                 interrupt-controller;
 283                                 #interrupt-cells = <2>;
 284                                 amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 285                                 status = "disabled";
 286                         };
 287
 288                         reset: reset-controller@4404 {
 289                                 compatible = "amlogic,meson-gxbb-reset";
 290                                 reg = <0x0 0x04404 0x0 0x9c>;
 291                                 #reset-cells = <1>;
 292                         };
 293
 294                         aiu: audio-controller@5400 {
 295                                 compatible = "amlogic,aiu";
 296                                 #sound-dai-cells = <2>;
 297                                 sound-name-prefix = "AIU";
 298                                 reg = <0x0 0x5400 0x0 0x2ac>;
 299                                 interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
 300                                              <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
 301                                 interrupt-names = "i2s", "spdif";
 302                                 status = "disabled";
 303                         };
 304
 305                         uart_A: serial@84c0 {
 306                                 compatible = "amlogic,meson-gx-uart";
 307                                 reg = <0x0 0x84c0 0x0 0x18>;
 308                                 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 309                                 status = "disabled";
 310                                 fifo-size = <128>;
 311                         };
 312
 313                         uart_B: serial@84dc {
 314                                 compatible = "amlogic,meson-gx-uart";
 315                                 reg = <0x0 0x84dc 0x0 0x18>;
 316                                 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 317                                 status = "disabled";
 318                         };
 319
 320                         i2c_A: i2c@8500 {
 321                                 compatible = "amlogic,meson-gxbb-i2c";
 322                                 reg = <0x0 0x08500 0x0 0x20>;
 323                                 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
 324                                 #address-cells = <1>;
 325                                 #size-cells = <0>;
 326                                 status = "disabled";
 327                         };
 328
 329                         pwm_ab: pwm@8550 {
 330                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 331                                 reg = <0x0 0x08550 0x0 0x10>;
 332                                 #pwm-cells = <3>;
 333                                 status = "disabled";
 334                         };
 335
 336                         pwm_cd: pwm@8650 {
 337                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 338                                 reg = <0x0 0x08650 0x0 0x10>;
 339                                 #pwm-cells = <3>;
 340                                 status = "disabled";
 341                         };
 342
 343                         saradc: adc@8680 {
 344                                 compatible = "amlogic,meson-saradc";
 345                                 reg = <0x0 0x8680 0x0 0x34>;
 346                                 #io-channel-cells = <1>;
 347                                 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
 348                                 status = "disabled";
 349                         };
 350
 351                         pwm_ef: pwm@86c0 {
 352                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 353                                 reg = <0x0 0x086c0 0x0 0x10>;
 354                                 #pwm-cells = <3>;
 355                                 status = "disabled";
 356                         };
 357
 358                         uart_C: serial@8700 {
 359                                 compatible = "amlogic,meson-gx-uart";
 360                                 reg = <0x0 0x8700 0x0 0x18>;
 361                                 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 362                                 status = "disabled";
 363                         };
 364
 365                         clock-measure@8758 {
 366                                 compatible = "amlogic,meson-gx-clk-measure";
 367                                 reg = <0x0 0x8758 0x0 0x10>;
 368                         };
 369
 370                         i2c_B: i2c@87c0 {
 371                                 compatible = "amlogic,meson-gxbb-i2c";
 372                                 reg = <0x0 0x087c0 0x0 0x20>;
 373                                 interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
 374                                 #address-cells = <1>;
 375                                 #size-cells = <0>;
 376                                 status = "disabled";
 377                         };
 378
 379                         i2c_C: i2c@87e0 {
 380                                 compatible = "amlogic,meson-gxbb-i2c";
 381                                 reg = <0x0 0x087e0 0x0 0x20>;
 382                                 interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
 383                                 #address-cells = <1>;
 384                                 #size-cells = <0>;
 385                                 status = "disabled";
 386                         };
 387
 388                         spicc: spi@8d80 {
 389                                 compatible = "amlogic,meson-gx-spicc";
 390                                 reg = <0x0 0x08d80 0x0 0x80>;
 391                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 392                                 #address-cells = <1>;
 393                                 #size-cells = <0>;
 394                                 status = "disabled";
 395                         };
 396
 397                         spifc: spi@8c80 {
 398                                 compatible = "amlogic,meson-gxbb-spifc";
 399                                 reg = <0x0 0x08c80 0x0 0x80>;
 400                                 #address-cells = <1>;
 401                                 #size-cells = <0>;
 402                                 status = "disabled";
 403                         };
 404
 405                         watchdog@98d0 {
 406                                 compatible = "amlogic,meson-gxbb-wdt";
 407                                 reg = <0x0 0x098d0 0x0 0x10>;
 408                                 clocks = <&xtal>;
 409                         };
 410                 };
 411
 412                 gic: interrupt-controller@c4301000 {
 413                         compatible = "arm,gic-400";
 414                         reg = <0x0 0xc4301000 0 0x1000>,
 415                               <0x0 0xc4302000 0 0x2000>,
 416                               <0x0 0xc4304000 0 0x2000>,
 417                               <0x0 0xc4306000 0 0x2000>;
 418                         interrupt-controller;
 419                         interrupts = <GIC_PPI 9
 420                                 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 421                         #interrupt-cells = <3>;
 422                         #address-cells = <0>;
 423                 };
 424
 425                 sram: sram@c8000000 {
 426                         compatible = "mmio-sram";
 427                         reg = <0x0 0xc8000000 0x0 0x14000>;
 428
 429                         #address-cells = <1>;
 430                         #size-cells = <1>;
 431                         ranges = <0 0x0 0xc8000000 0x14000>;
 432
 433                         cpu_scp_lpri: scp-sram@0 {
 434                                 compatible = "amlogic,meson-gxbb-scp-shmem";
 435                                 reg = <0x13000 0x400>;
 436                         };
 437
 438                         cpu_scp_hpri: scp-sram@200 {
 439                                 compatible = "amlogic,meson-gxbb-scp-shmem";
 440                                 reg = <0x13400 0x400>;
 441                         };
 442                 };
 443
 444                 aobus: bus@c8100000 {
 445                         compatible = "simple-bus";
 446                         reg = <0x0 0xc8100000 0x0 0x100000>;
 447                         #address-cells = <2>;
 448                         #size-cells = <2>;
 449                         ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
 450
 451                         sysctrl_AO: sys-ctrl@0 {
 452                                 compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
 453                                 reg = <0x0 0x0 0x0 0x100>;
 454
 455                                 clkc_AO: clock-controller {
 456                                         compatible = "amlogic,meson-gx-aoclkc";
 457                                         #clock-cells = <1>;
 458                                         #reset-cells = <1>;
 459                                 };
 460                         };
 461
 462                         cec_AO: cec@100 {
 463                                 compatible = "amlogic,meson-gx-ao-cec";
 464                                 reg = <0x0 0x00100 0x0 0x14>;
 465                                 interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
 466                                 status = "disabled";
 467                         };
 468
 469                         sec_AO: ao-secure@140 {
 470                                 compatible = "amlogic,meson-gx-ao-secure", "syscon";
 471                                 reg = <0x0 0x140 0x0 0x140>;
 472                                 amlogic,has-chip-id;
 473                         };
 474
 475                         uart_AO: serial@4c0 {
 476                                 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 477                                 reg = <0x0 0x004c0 0x0 0x18>;
 478                                 interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 479                                 status = "disabled";
 480                         };
 481
 482                         uart_AO_B: serial@4e0 {
 483                                 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 484                                 reg = <0x0 0x004e0 0x0 0x18>;
 485                                 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 486                                 status = "disabled";
 487                         };
 488
 489                         i2c_AO: i2c@500 {
 490                                 compatible = "amlogic,meson-gxbb-i2c";
 491                                 reg = <0x0 0x500 0x0 0x20>;
 492                                 interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
 493                                 #address-cells = <1>;
 494                                 #size-cells = <0>;
 495                                 status = "disabled";
 496                         };
 497
 498                         pwm_AO_ab: pwm@550 {
 499                                 compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
 500                                 reg = <0x0 0x00550 0x0 0x10>;
 501                                 #pwm-cells = <3>;
 502                                 status = "disabled";
 503                         };
 504
 505                         ir: ir@580 {
 506                                 compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
 507                                 reg = <0x0 0x00580 0x0 0x40>;
 508                                 interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
 509                                 status = "disabled";
 510                         };
 511                 };
 512
 513                 vdec: video-codec@c8820000 {
 514                         compatible = "amlogic,gx-vdec";
 515                         reg = <0x0 0xc8820000 0x0 0x10000>,
 516                               <0x0 0xc110a580 0x0 0xe4>;
 517                         reg-names = "dos", "esparser";
 518
 519                         interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
 520                                      <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
 521                         interrupt-names = "vdec", "esparser";
 522
 523                         amlogic,ao-sysctrl = <&sysctrl_AO>;
 524                         amlogic,canvas = <&canvas>;
 525                 };
 526
 527                 periphs: bus@c8834000 {
 528                         compatible = "simple-bus";
 529                         reg = <0x0 0xc8834000 0x0 0x2000>;
 530                         #address-cells = <2>;
 531                         #size-cells = <2>;
 532                         ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 533
 534                         hwrng: rng@0 {
 535                                 compatible = "amlogic,meson-rng";
 536                                 reg = <0x0 0x0 0x0 0x4>;
 537                         };
 538                 };
 539
 540                 dmcbus: bus@c8838000 {
 541                         compatible = "simple-bus";
 542                         reg = <0x0 0xc8838000 0x0 0x400>;
 543                         #address-cells = <2>;
 544                         #size-cells = <2>;
 545                         ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
 546
 547                         canvas: video-lut@48 {
 548                                 compatible = "amlogic,canvas";
 549                                 reg = <0x0 0x48 0x0 0x14>;
 550                         };
 551                 };
 552
 553                 hiubus: bus@c883c000 {
 554                         compatible = "simple-bus";
 555                         reg = <0x0 0xc883c000 0x0 0x2000>;
 556                         #address-cells = <2>;
 557                         #size-cells = <2>;
 558                         ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
 559
 560                         sysctrl: system-controller@0 {
 561                                 compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
 562                                 reg = <0 0 0 0x400>;
 563
 564                                 pwrc: power-controller {
 565                                         compatible = "amlogic,meson-gxbb-pwrc";
 566                                         #power-domain-cells = <1>;
 567                                         amlogic,ao-sysctrl = <&sysctrl_AO>;
 568                                 };
 569                         };
 570
 571                         mailbox: mailbox@404 {
 572                                 compatible = "amlogic,meson-gxbb-mhu";
 573                                 reg = <0 0x404 0 0x4c>;
 574                                 interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
 575                                              <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
 576                                              <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
 577                                 #mbox-cells = <1>;
 578                         };
 579                 };
 580
 581                 ethmac: ethernet@c9410000 {
 582                         compatible = "amlogic,meson-gxbb-dwmac",
 583                                      "snps,dwmac-3.70a",
 584                                      "snps,dwmac";
 585                         reg = <0x0 0xc9410000 0x0 0x10000>,
 586                               <0x0 0xc8834540 0x0 0x4>;
 587                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 588                         interrupt-names = "macirq";
 589                         rx-fifo-depth = <4096>;
 590                         tx-fifo-depth = <2048>;
 591                         power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
 592                         status = "disabled";
 593                 };
 594
 595                 apb: apb@d0000000 {
 596                         compatible = "simple-bus";
 597                         reg = <0x0 0xd0000000 0x0 0x200000>;
 598                         #address-cells = <2>;
 599                         #size-cells = <2>;
 600                         ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
 601
 602                         sd_emmc_a: mmc@70000 {
 603                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 604                                 reg = <0x0 0x70000 0x0 0x800>;
 605                                 interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 606                                 status = "disabled";
 607                         };
 608
 609                         sd_emmc_b: mmc@72000 {
 610                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 611                                 reg = <0x0 0x72000 0x0 0x800>;
 612                                 interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 613                                 status = "disabled";
 614                         };
 615
 616                         sd_emmc_c: mmc@74000 {
 617                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 618                                 reg = <0x0 0x74000 0x0 0x800>;
 619                                 interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 620                                 status = "disabled";
 621                         };
 622                 };
 623
 624                 vpu: vpu@d0100000 {
 625                         compatible = "amlogic,meson-gx-vpu";
 626                         reg = <0x0 0xd0100000 0x0 0x100000>,
 627                               <0x0 0xc883c000 0x0 0x1000>;
 628                         reg-names = "vpu", "hhi";
 629                         interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
 630                         #address-cells = <1>;
 631                         #size-cells = <0>;
 632                         amlogic,canvas = <&canvas>;
 633
 634                         /* CVBS VDAC output port */
 635                         cvbs_vdac_port: port@0 {
 636                                 reg = <0>;
 637                         };
 638
 639                         /* HDMI-TX output port */
 640                         hdmi_tx_port: port@1 {
 641                                 reg = <1>;
 642
 643                                 hdmi_tx_out: endpoint {
 644                                         remote-endpoint = <&hdmi_tx_in>;
 645                                 };
 646                         };
 647                 };
 648
 649                 hdmi_tx: hdmi-tx@c883a000 {
 650                         compatible = "amlogic,meson-gx-dw-hdmi";
 651                         reg = <0x0 0xc883a000 0x0 0x1c>;
 652                         interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 653                         #address-cells = <1>;
 654                         #size-cells = <0>;
 655                         #sound-dai-cells = <0>;
 656                         sound-name-prefix = "HDMITX";
 657                         status = "disabled";
 658
 659                         /* VPU VENC Input */
 660                         hdmi_tx_venc_port: port@0 {
 661                                 reg = <0>;
 662
 663                                 hdmi_tx_in: endpoint {
 664                                         remote-endpoint = <&hdmi_tx_out>;
 665                                 };
 666                         };
 667
 668                         /* TMDS Output */
 669                         hdmi_tx_tmds_port: port@1 {
 670                                 reg = <1>;
 671                         };
 672                 };
 673         };
 674 };