GNU Linux-libre 6.1.90-gnu
[releases.git] / arch / arm64 / boot / dts / altera / socfpga_stratix10_socdk.dts
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright Altera Corporation (C) 2015. All rights reserved.
4  */
5
6 #include "socfpga_stratix10.dtsi"
7
8 / {
9         model = "SoCFPGA Stratix 10 SoCDK";
10         compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10";
11
12         aliases {
13                 serial0 = &uart0;
14                 ethernet0 = &gmac0;
15                 ethernet1 = &gmac1;
16                 ethernet2 = &gmac2;
17         };
18
19         chosen {
20                 stdout-path = "serial0:115200n8";
21         };
22
23         leds {
24                 compatible = "gpio-leds";
25                 hps0 {
26                         label = "hps_led0";
27                         gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
28                 };
29
30                 hps1 {
31                         label = "hps_led1";
32                         gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
33                 };
34
35                 hps2 {
36                         label = "hps_led2";
37                         gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
38                 };
39         };
40
41         memory {
42                 device_type = "memory";
43                 /* We expect the bootloader to fill in the reg */
44                 reg = <0 0 0 0>;
45         };
46
47         ref_033v: regulator-v-ref {
48                 compatible = "regulator-fixed";
49                 regulator-name = "0.33V";
50                 regulator-min-microvolt = <330000>;
51                 regulator-max-microvolt = <330000>;
52         };
53
54         soc {
55                 eccmgr {
56                         sdmmca-ecc@ff8c8c00 {
57                                 compatible = "altr,socfpga-s10-sdmmc-ecc",
58                                              "altr,socfpga-sdmmc-ecc";
59                                 reg = <0xff8c8c00 0x100>;
60                                 altr,ecc-parent = <&mmc>;
61                                 interrupts = <14 4>,
62                                              <15 4>;
63                         };
64                 };
65         };
66 };
67
68 &gpio1 {
69         status = "okay";
70 };
71
72 &gmac0 {
73         status = "okay";
74         phy-mode = "rgmii";
75         phy-handle = <&phy0>;
76
77         max-frame-size = <9000>;
78
79         mdio0 {
80                 #address-cells = <1>;
81                 #size-cells = <0>;
82                 compatible = "snps,dwmac-mdio";
83                 phy0: ethernet-phy@0 {
84                         reg = <4>;
85
86                         txd0-skew-ps = <0>; /* -420ps */
87                         txd1-skew-ps = <0>; /* -420ps */
88                         txd2-skew-ps = <0>; /* -420ps */
89                         txd3-skew-ps = <0>; /* -420ps */
90                         rxd0-skew-ps = <420>; /* 0ps */
91                         rxd1-skew-ps = <420>; /* 0ps */
92                         rxd2-skew-ps = <420>; /* 0ps */
93                         rxd3-skew-ps = <420>; /* 0ps */
94                         txen-skew-ps = <0>; /* -420ps */
95                         txc-skew-ps = <900>; /* 0ps */
96                         rxdv-skew-ps = <420>; /* 0ps */
97                         rxc-skew-ps = <1680>; /* 780ps */
98                 };
99         };
100 };
101
102 &mmc {
103         status = "okay";
104         cap-sd-highspeed;
105         cap-mmc-highspeed;
106         broken-cd;
107         bus-width = <4>;
108 };
109
110 &osc1 {
111         clock-frequency = <25000000>;
112 };
113
114 &uart0 {
115         status = "okay";
116 };
117
118 &usb0 {
119         status = "okay";
120         disable-over-current;
121 };
122
123 &watchdog0 {
124         status = "okay";
125 };
126
127 &i2c1 {
128         status = "okay";
129         clock-frequency = <100000>;
130         i2c-sda-falling-time-ns = <890>;  /* hcnt */
131         i2c-scl-falling-time-ns = <890>;  /* lcnt */
132
133         adc@14 {
134                 compatible = "lltc,ltc2497";
135                 reg = <0x14>;
136                 vref-supply = <&ref_033v>;
137         };
138
139         temp@4c {
140                 compatible = "maxim,max1619";
141                 reg = <0x4c>;
142         };
143
144         eeprom@51 {
145                 compatible = "atmel,24c32";
146                 reg = <0x51>;
147                 pagesize = <32>;
148         };
149
150         rtc@68 {
151                 compatible = "dallas,ds1339";
152                 reg = <0x68>;
153         };
154 };
155
156 &qspi {
157         status = "okay";
158         flash@0 {
159                 #address-cells = <1>;
160                 #size-cells = <1>;
161                 compatible = "micron,mt25qu02g", "jedec,spi-nor";
162                 reg = <0>;
163                 spi-max-frequency = <100000000>;
164
165                 m25p,fast-read;
166                 cdns,page-size = <256>;
167                 cdns,block-size = <16>;
168                 cdns,read-delay = <1>;
169                 cdns,tshsl-ns = <50>;
170                 cdns,tsd2d-ns = <50>;
171                 cdns,tchsh-ns = <4>;
172                 cdns,tslch-ns = <4>;
173
174                 partitions {
175                         compatible = "fixed-partitions";
176                         #address-cells = <1>;
177                         #size-cells = <1>;
178
179                         qspi_boot: partition@0 {
180                                 label = "Boot and fpga data";
181                                 reg = <0x0 0x03FE0000>;
182                         };
183
184                         qspi_rootfs: partition@3FE0000 {
185                                 label = "Root Filesystem - JFFS2";
186                                 reg = <0x03FE0000 0x0C020000>;
187                         };
188                 };
189         };
190 };