arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
   4  */
   5
   6 #include "sun50i-h6-pine-h64.dts"
   7
   8 / {
   9         model = "Pine H64 model B";
  10         compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
  11
  12         /delete-node/ reg_gmac_3v3;
  13
  14         wifi_pwrseq: wifi_pwrseq {
  15                 compatible = "mmc-pwrseq-simple";
  16                 reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
  17                 post-power-on-delay-ms = <200>;
  18         };
  19 };
  20
  21 &hdmi_connector {
  22         /delete-property/ ddc-en-gpios;
  23 };
  24
  25 &emac {
  26         phy-supply = <&reg_aldo2>;
  27 };
  28
  29 &mmc1 {
  30         vmmc-supply = <&reg_cldo3>;
  31         vqmmc-supply = <&reg_aldo1>;
  32         mmc-pwrseq = <&wifi_pwrseq>;
  33         bus-width = <4>;
  34         non-removable;
  35         status = "okay";
  36 };
  37
  38 &uart1 {
  39         pinctrl-names = "default";
  40         pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
  41         uart-has-rtscts;
  42         status = "okay";
  43
  44         bluetooth {
  45                 compatible = "realtek,rtl8723bs-bt";
  46                 device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
  47                 host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
  48                 enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
  49                 max-speed = <1500000>;
  50         };
  51 };