1 # SPDX-License-Identifier: GPL-2.0-only
3 bool "SA11x0 Implementations"
4 depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5)
5 depends on !(ARCH_MOXART || ARCH_GEMINI)
7 depends on CPU_LITTLE_ENDIAN
9 select ARCH_NO_SG_CHAIN
18 select NEED_MACH_MEMORY_H
20 Support for StrongARM 11x0 based boards.
26 select ARM_SA1110_CPUFREQ
28 select LEDS_GPIO_REGISTER
30 select REGULATOR_FIXED_VOLTAGE
32 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
33 Microprocessor Development Board (also known as the Assabet).
35 config ASSABET_NEPONSET
36 bool "Include support for Neponset"
37 depends on SA1100_ASSABET
40 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
41 Microprocessor Development Board (Assabet) with the SA-1111
42 Development Board (Nepon).
46 depends on UNUSED_BOARD_FILES
47 select ARM_SA1110_CPUFREQ
48 select LEDS_GPIO_REGISTER
50 The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
51 More information is available at:
52 <http://www.intrinsyc.com/products/cerfboard/>.
54 Say Y if configuring for an Intrinsyc CerfBoard.
58 prompt "Cerf Flash available"
59 depends on SA1100_CERF
60 default SA1100_CERF_FLASH_8MB
62 config SA1100_CERF_FLASH_8MB
65 config SA1100_CERF_FLASH_16MB
68 config SA1100_CERF_FLASH_32MB
74 bool "Sharp Zaurus SL5500"
75 # FIXME: select ARM_SA11x0_CPUFREQ
80 Say Y here to support the Sharp Zaurus SL5500 PDAs.
83 bool "Compaq iPAQ H3100"
84 depends on UNUSED_BOARD_FILES
85 select ARM_SA1110_CPUFREQ
89 Say Y here if you intend to run this kernel on the Compaq iPAQ
90 H3100 handheld computer.
93 bool "Compaq iPAQ H3600/H3700"
94 select ARM_SA1110_CPUFREQ
98 Say Y here if you intend to run this kernel on the Compaq iPAQ
99 H3600 and H3700 handheld computers.
102 bool "HP Labs BadgePAD 4"
103 depends on UNUSED_BOARD_FILES
104 select ARM_SA1100_CPUFREQ
107 Say Y here if you want to build a kernel for the HP Laboratories
110 config SA1100_JORNADA720
111 bool "HP Jornada 720"
112 depends on UNUSED_BOARD_FILES
113 # FIXME: select ARM_SA11x0_CPUFREQ
116 Say Y here if you want to build a kernel for the HP Jornada 720
117 handheld computer. See
118 <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#>
120 config SA1100_JORNADA720_SSP
121 bool "HP Jornada 720 Extended SSP driver"
122 depends on SA1100_JORNADA720
125 Say Y here if you have a HP Jornada 7xx handheld computer and you
126 want to access devices connected to the MCU. Those include the
127 keyboard, touchscreen, backlight and battery. This driver also activates
128 the generic SSP which it extends.
130 config SA1100_HACKKIT
131 bool "HackKit Core CPU Board"
132 depends on UNUSED_BOARD_FILES
133 select ARM_SA1100_CPUFREQ
135 Say Y here to support the HackKit Core CPU Board
136 <http://hackkit.eletztrick.de>;
140 depends on UNUSED_BOARD_FILES
141 select ARM_SA1100_CPUFREQ
143 Say Y here if you are using the Linux Advanced Radio Terminal
144 (also known as the LART). See <http://www.lartmaker.nl/> for
145 information on the LART.
147 config SA1100_NANOENGINE
149 depends on UNUSED_BOARD_FILES
150 select ARM_SA1110_CPUFREQ
152 select PCI_NANOENGINE
154 Say Y here if you are using the Bright Star Engineering nanoEngine.
155 See <http://www.brightstareng.com/arm/nanoeng.htm> for information
156 on the BSE nanoEngine.
160 depends on UNUSED_BOARD_FILES
161 select ARM_SA1100_CPUFREQ
163 Say Y here if you are using version 1 of the Portable Linux
164 Embedded Board (also known as PLEB).
165 See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/>
166 for more information.
168 config SA1100_SHANNON
170 depends on UNUSED_BOARD_FILES
171 select ARM_SA1100_CPUFREQ
173 select REGULATOR_FIXED_VOLTAGE
175 The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
176 limited edition webphone produced by Philips. The Shannon is a SA1100
177 platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
178 and a telco interface.
182 depends on UNUSED_BOARD_FILES
183 select ARM_SA1110_CPUFREQ
185 The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
186 are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
187 FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
188 PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
189 like CL4 in additional it has a PCMCIA-Slot. For more information
190 visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
193 tristate "Generic PIO SSP"
194 depends on UNUSED_BOARD_FILES
196 Say Y here to enable support for the generic PIO SSP driver.
197 This isn't for audio support, but for attached sensors and
198 other devices, eg for BadgePAD 4 sensor support.