1 // SPDX-License-Identifier: GPL-2.0
3 // Copyright (c) 2003-2005 Simtec Electronics
4 // Ben Dooks <ben@simtec.co.uk>
6 // https://www.handhelds.org/projects/h1940.html
8 #include <linux/kernel.h>
9 #include <linux/types.h>
10 #include <linux/interrupt.h>
11 #include <linux/list.h>
12 #include <linux/memblock.h>
13 #include <linux/timer.h>
14 #include <linux/init.h>
15 #include <linux/device.h>
16 #include <linux/serial_core.h>
17 #include <linux/serial_s3c.h>
18 #include <linux/platform_device.h>
20 #include <linux/gpio.h>
21 #include <linux/gpio/machine.h>
22 #include <linux/input.h>
23 #include <linux/gpio_keys.h>
24 #include <linux/pwm.h>
25 #include <linux/pwm_backlight.h>
26 #include <linux/i2c.h>
27 #include <linux/leds.h>
28 #include <linux/pda_power.h>
29 #include <linux/s3c_adc_battery.h>
30 #include <linux/delay.h>
32 #include <video/platform_lcd.h>
34 #include <linux/mmc/host.h>
35 #include <linux/export.h>
38 #include <asm/mach-types.h>
39 #include <asm/mach/arch.h>
40 #include <asm/mach/map.h>
41 #include <asm/mach/irq.h>
43 #include <linux/platform_data/i2c-s3c2410.h>
44 #include <linux/platform_data/mmc-s3cmci.h>
45 #include <linux/platform_data/touchscreen-s3c2410.h>
46 #include <linux/platform_data/usb-s3c2410_udc.h>
48 #include <sound/uda1380.h>
50 #include <linux/platform_data/fb-s3c2410.h>
52 #include "hardware-s3c24xx.h"
53 #include "regs-clock.h"
54 #include "regs-gpio.h"
55 #include "gpio-samsung.h"
65 #define H1940_LATCH ((void __force __iomem *)0xF8000000)
67 #define H1940_PA_LATCH S3C2410_CS2
69 #define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END))
71 #define S3C24XX_PLL_MDIV_SHIFT (12)
72 #define S3C24XX_PLL_PDIV_SHIFT (4)
73 #define S3C24XX_PLL_SDIV_SHIFT (0)
75 static struct map_desc h1940_iodesc[] __initdata = {
77 .virtual = (unsigned long)H1940_LATCH,
78 .pfn = __phys_to_pfn(H1940_PA_LATCH),
84 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
85 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
86 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
88 static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
107 .uart_flags = UPF_CONS_FLOW,
114 /* Board control latch control */
116 static unsigned int latch_state;
118 static void h1940_latch_control(unsigned int clear, unsigned int set)
122 local_irq_save(flags);
124 latch_state &= ~clear;
127 __raw_writel(latch_state, H1940_LATCH);
129 local_irq_restore(flags);
132 static inline int h1940_gpiolib_to_latch(int offset)
134 return 1 << (offset + 16);
137 static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
138 unsigned offset, int value)
140 int latch_bit = h1940_gpiolib_to_latch(offset);
142 h1940_latch_control(value ? 0 : latch_bit,
143 value ? latch_bit : 0);
146 static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
147 unsigned offset, int value)
149 h1940_gpiolib_latch_set(chip, offset, value);
153 static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
156 return (latch_state >> (offset + 16)) & 1;
159 static struct gpio_chip h1940_latch_gpiochip = {
160 .base = H1940_LATCH_GPIO(0),
161 .owner = THIS_MODULE,
162 .label = "H1940_LATCH",
164 .direction_output = h1940_gpiolib_latch_output,
165 .set = h1940_gpiolib_latch_set,
166 .get = h1940_gpiolib_latch_get,
169 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
170 .vbus_pin = S3C2410_GPG(5),
171 .vbus_pin_inverted = 1,
172 .pullup_pin = H1940_LATCH_USB_DP,
175 static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
178 .oversampling_shift = 2,
179 .cfg_gpio = s3c24xx_ts_cfg_gpio,
185 static struct s3c2410fb_display h1940_lcd __initdata = {
186 .lcdcon5= S3C2410_LCDCON5_FRM565 | \
187 S3C2410_LCDCON5_INVVLINE | \
188 S3C2410_LCDCON5_HWSWP,
190 .type = S3C2410_LCDCON1_TFT,
205 static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
206 .displays = &h1940_lcd,
208 .default_display = 0,
211 .gpccon = 0xaa940659,
212 .gpccon_mask = 0xffffc0f0,
213 .gpccon_reg = S3C2410_GPCCON,
215 .gpcup_mask = 0xffffffff,
216 .gpcup_reg = S3C2410_GPCUP,
217 .gpdcon = 0xaa84aaa0,
218 .gpdcon_mask = 0xffffffff,
219 .gpdcon_reg = S3C2410_GPDCON,
221 .gpdup_mask = 0xffffffff,
222 .gpdup_reg = S3C2410_GPDUP,
225 static int power_supply_init(struct device *dev)
227 return gpio_request(S3C2410_GPF(2), "cable plugged");
230 static int h1940_is_ac_online(void)
232 return !gpio_get_value(S3C2410_GPF(2));
235 static void power_supply_exit(struct device *dev)
237 gpio_free(S3C2410_GPF(2));
240 static char *h1940_supplicants[] = {
245 static struct pda_power_pdata power_supply_info = {
246 .init = power_supply_init,
247 .is_ac_online = h1940_is_ac_online,
248 .exit = power_supply_exit,
249 .supplied_to = h1940_supplicants,
250 .num_supplicants = ARRAY_SIZE(h1940_supplicants),
253 static struct resource power_supply_resources[] = {
254 [0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
255 | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
258 static struct platform_device power_supply = {
265 .resource = power_supply_resources,
266 .num_resources = ARRAY_SIZE(power_supply_resources),
269 static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
270 { .volt = 4070, .cur = 162, .level = 100},
271 { .volt = 4040, .cur = 165, .level = 95},
272 { .volt = 4016, .cur = 164, .level = 90},
273 { .volt = 3996, .cur = 166, .level = 85},
274 { .volt = 3971, .cur = 168, .level = 80},
275 { .volt = 3951, .cur = 168, .level = 75},
276 { .volt = 3931, .cur = 170, .level = 70},
277 { .volt = 3903, .cur = 172, .level = 65},
278 { .volt = 3886, .cur = 172, .level = 60},
279 { .volt = 3858, .cur = 176, .level = 55},
280 { .volt = 3842, .cur = 176, .level = 50},
281 { .volt = 3818, .cur = 176, .level = 45},
282 { .volt = 3789, .cur = 180, .level = 40},
283 { .volt = 3769, .cur = 180, .level = 35},
284 { .volt = 3749, .cur = 184, .level = 30},
285 { .volt = 3732, .cur = 184, .level = 25},
286 { .volt = 3716, .cur = 184, .level = 20},
287 { .volt = 3708, .cur = 184, .level = 15},
288 { .volt = 3716, .cur = 96, .level = 10},
289 { .volt = 3700, .cur = 96, .level = 5},
290 { .volt = 3684, .cur = 96, .level = 0},
293 static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
294 { .volt = 4130, .cur = 0, .level = 100},
295 { .volt = 3982, .cur = 0, .level = 50},
296 { .volt = 3854, .cur = 0, .level = 10},
297 { .volt = 3841, .cur = 0, .level = 0},
300 static int h1940_bat_init(void)
304 ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable");
307 gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0);
313 static void h1940_bat_exit(void)
315 gpio_free(H1940_LATCH_SM803_ENABLE);
318 static void h1940_enable_charger(void)
320 gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
323 static void h1940_disable_charger(void)
325 gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
328 static struct s3c_adc_bat_pdata h1940_bat_cfg = {
329 .init = h1940_bat_init,
330 .exit = h1940_bat_exit,
331 .enable_charger = h1940_enable_charger,
332 .disable_charger = h1940_disable_charger,
333 .gpio_charge_finished = S3C2410_GPF(3),
335 .lut_noac = bat_lut_noac,
336 .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
337 .lut_acin = bat_lut_acin,
338 .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
340 .current_channel = 1,
342 .current_mult = 1893,
343 .internal_impedance = 200,
344 .backup_volt_channel = 3,
345 /* TODO Check backup volt multiplier */
346 .backup_volt_mult = 4056,
347 .backup_volt_min = 0,
348 .backup_volt_max = 4149288
351 static struct platform_device h1940_battery = {
352 .name = "s3c-adc-battery",
355 .parent = &s3c_device_adc.dev,
356 .platform_data = &h1940_bat_cfg,
360 static DEFINE_SPINLOCK(h1940_blink_spin);
362 int h1940_led_blink_set(struct gpio_desc *desc, int state,
363 unsigned long *delay_on, unsigned long *delay_off)
365 int blink_gpio, check_gpio1, check_gpio2;
366 int gpio = desc ? desc_to_gpio(desc) : -EINVAL;
369 case H1940_LATCH_LED_GREEN:
370 blink_gpio = S3C2410_GPA(7);
371 check_gpio1 = S3C2410_GPA(1);
372 check_gpio2 = S3C2410_GPA(3);
374 case H1940_LATCH_LED_RED:
375 blink_gpio = S3C2410_GPA(1);
376 check_gpio1 = S3C2410_GPA(7);
377 check_gpio2 = S3C2410_GPA(3);
380 blink_gpio = S3C2410_GPA(3);
381 check_gpio1 = S3C2410_GPA(1);
382 check_gpio2 = S3C2410_GPA(7);
386 if (delay_on && delay_off && !*delay_on && !*delay_off)
387 *delay_on = *delay_off = 500;
389 spin_lock(&h1940_blink_spin);
392 case GPIO_LED_NO_BLINK_LOW:
393 case GPIO_LED_NO_BLINK_HIGH:
394 if (!gpio_get_value(check_gpio1) &&
395 !gpio_get_value(check_gpio2))
396 gpio_set_value(H1940_LATCH_LED_FLASH, 0);
397 gpio_set_value(blink_gpio, 0);
398 if (gpio_is_valid(gpio))
399 gpio_set_value(gpio, state);
402 if (gpio_is_valid(gpio))
403 gpio_set_value(gpio, 0);
404 gpio_set_value(H1940_LATCH_LED_FLASH, 1);
405 gpio_set_value(blink_gpio, 1);
409 spin_unlock(&h1940_blink_spin);
413 EXPORT_SYMBOL(h1940_led_blink_set);
415 static struct gpio_led h1940_leds_desc[] = {
418 .default_trigger = "main-battery-full",
419 .gpio = H1940_LATCH_LED_GREEN,
420 .retain_state_suspended = 1,
425 = "main-battery-charging-blink-full-solid",
426 .gpio = H1940_LATCH_LED_RED,
427 .retain_state_suspended = 1,
431 static struct gpio_led_platform_data h1940_leds_pdata = {
432 .num_leds = ARRAY_SIZE(h1940_leds_desc),
433 .leds = h1940_leds_desc,
434 .gpio_blink_set = h1940_led_blink_set,
437 static struct platform_device h1940_device_leds = {
441 .platform_data = &h1940_leds_pdata,
445 static struct platform_device h1940_device_bluetooth = {
450 static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
452 s3c24xx_mci_def_set_power(power_mode, vdd);
454 switch (power_mode) {
456 gpio_set_value(H1940_LATCH_SD_POWER, 0);
460 gpio_set_value(H1940_LATCH_SD_POWER, 1);
467 static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
468 .set_power = h1940_set_mmc_power,
469 .ocr_avail = MMC_VDD_32_33,
472 static struct gpiod_lookup_table h1940_mmc_gpio_table = {
473 .dev_id = "s3c2410-sdi",
475 /* Card detect S3C2410_GPF(5) */
476 GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
477 /* Write protect S3C2410_GPH(8) */
478 GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
480 GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
481 GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
482 GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
483 GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
484 GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
485 GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
490 static struct gpiod_lookup_table h1940_audio_gpio_table = {
491 .dev_id = "h1940-audio",
493 GPIO_LOOKUP("H1940_LATCH",
494 H1940_LATCH_AUDIO_POWER - H1940_LATCH_GPIO(0),
495 "speaker-power", GPIO_ACTIVE_HIGH),
496 GPIO_LOOKUP("GPIOG", 4, "hp", GPIO_ACTIVE_HIGH),
501 static struct platform_device h1940_audio = {
502 .name = "h1940-audio",
506 static struct pwm_lookup h1940_pwm_lookup[] = {
507 PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
508 PWM_POLARITY_NORMAL),
511 static int h1940_backlight_init(struct device *dev)
513 gpio_request(S3C2410_GPB(0), "Backlight");
515 gpio_direction_output(S3C2410_GPB(0), 0);
516 s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
517 s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
518 gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
523 static int h1940_backlight_notify(struct device *dev, int brightness)
526 gpio_direction_output(S3C2410_GPB(0), 1);
527 gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
529 gpio_direction_output(S3C2410_GPB(0), 0);
530 s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
531 s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
532 gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
537 static void h1940_backlight_exit(struct device *dev)
539 gpio_direction_output(S3C2410_GPB(0), 1);
540 gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
544 static struct platform_pwm_backlight_data backlight_data = {
545 .max_brightness = 100,
546 .dft_brightness = 50,
547 .init = h1940_backlight_init,
548 .notify = h1940_backlight_notify,
549 .exit = h1940_backlight_exit,
552 static struct platform_device h1940_backlight = {
553 .name = "pwm-backlight",
555 .parent = &samsung_device_pwm.dev,
556 .platform_data = &backlight_data,
561 static void h1940_lcd_power_set(struct plat_lcd_data *pd,
564 int value, retries = 100;
567 gpio_set_value(S3C2410_GPC(0), 0);
570 value = gpio_get_value(S3C2410_GPC(6));
571 } while (value && retries--);
573 gpio_set_value(H1940_LATCH_LCD_P2, 0);
574 gpio_set_value(H1940_LATCH_LCD_P3, 0);
575 gpio_set_value(H1940_LATCH_LCD_P4, 0);
577 gpio_direction_output(S3C2410_GPC(1), 0);
578 gpio_direction_output(S3C2410_GPC(4), 0);
580 gpio_set_value(H1940_LATCH_LCD_P1, 0);
581 gpio_set_value(H1940_LATCH_LCD_P0, 0);
583 gpio_set_value(S3C2410_GPC(5), 0);
586 gpio_set_value(H1940_LATCH_LCD_P0, 1);
587 gpio_set_value(H1940_LATCH_LCD_P1, 1);
589 gpio_direction_input(S3C2410_GPC(1));
590 gpio_direction_input(S3C2410_GPC(4));
592 s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
593 s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
595 gpio_set_value(S3C2410_GPC(5), 1);
596 gpio_set_value(S3C2410_GPC(0), 1);
598 gpio_set_value(H1940_LATCH_LCD_P3, 1);
599 gpio_set_value(H1940_LATCH_LCD_P2, 1);
600 gpio_set_value(H1940_LATCH_LCD_P4, 1);
604 static struct plat_lcd_data h1940_lcd_power_data = {
605 .set_power = h1940_lcd_power_set,
608 static struct platform_device h1940_lcd_powerdev = {
609 .name = "platform-lcd",
610 .dev.parent = &s3c_device_lcd.dev,
611 .dev.platform_data = &h1940_lcd_power_data,
614 static struct uda1380_platform_data uda1380_info = {
615 .gpio_power = H1940_LATCH_UDA_POWER,
616 .gpio_reset = S3C2410_GPA(12),
617 .dac_clk = UDA1380_DAC_CLK_SYSCLK,
620 static struct i2c_board_info h1940_i2c_devices[] = {
622 I2C_BOARD_INFO("uda1380", 0x1a),
623 .platform_data = &uda1380_info,
627 #define DECLARE_BUTTON(p, k, n, w) \
636 static struct gpio_keys_button h1940_buttons[] = {
637 DECLARE_BUTTON(S3C2410_GPF(0), KEY_POWER, "Power", 1),
638 DECLARE_BUTTON(S3C2410_GPF(6), KEY_ENTER, "Select", 1),
639 DECLARE_BUTTON(S3C2410_GPF(7), KEY_RECORD, "Record", 0),
640 DECLARE_BUTTON(S3C2410_GPG(0), KEY_F11, "Calendar", 0),
641 DECLARE_BUTTON(S3C2410_GPG(2), KEY_F12, "Contacts", 0),
642 DECLARE_BUTTON(S3C2410_GPG(3), KEY_MAIL, "Mail", 0),
643 DECLARE_BUTTON(S3C2410_GPG(6), KEY_LEFT, "Left_arrow", 0),
644 DECLARE_BUTTON(S3C2410_GPG(7), KEY_HOMEPAGE, "Home", 0),
645 DECLARE_BUTTON(S3C2410_GPG(8), KEY_RIGHT, "Right_arrow", 0),
646 DECLARE_BUTTON(S3C2410_GPG(9), KEY_UP, "Up_arrow", 0),
647 DECLARE_BUTTON(S3C2410_GPG(10), KEY_DOWN, "Down_arrow", 0),
650 static struct gpio_keys_platform_data h1940_buttons_data = {
651 .buttons = h1940_buttons,
652 .nbuttons = ARRAY_SIZE(h1940_buttons),
655 static struct platform_device h1940_dev_buttons = {
659 .platform_data = &h1940_buttons_data,
663 static struct platform_device *h1940_devices[] __initdata = {
670 &s3c_device_usbgadget,
672 &h1940_device_bluetooth,
685 static void __init h1940_map_io(void)
687 s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
688 s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
689 s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
693 #ifdef CONFIG_PM_H1940
694 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
698 /* Add latch gpio chip, set latch initial value */
699 h1940_latch_control(0, 0);
700 WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL));
703 static void __init h1940_init_time(void)
705 s3c2410_init_clocks(12000000);
706 s3c24xx_timer_init();
709 /* H1940 and RX3715 need to reserve this for suspend */
710 static void __init h1940_reserve(void)
712 memblock_reserve(0x30003000, 0x1000);
713 memblock_reserve(0x30081000, 0x1000);
716 static void __init h1940_init(void)
720 s3c24xx_fb_set_platdata(&h1940_fb_info);
721 gpiod_add_lookup_table(&h1940_mmc_gpio_table);
722 gpiod_add_lookup_table(&h1940_audio_gpio_table);
723 /* Configure the I2S pins (GPE0...GPE4) in correct mode */
724 s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
726 s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
727 s3c24xx_udc_set_platdata(&h1940_udc_cfg);
728 s3c24xx_ts_set_platdata(&h1940_ts_cfg);
729 s3c_i2c0_set_platdata(NULL);
731 /* Turn off suspend on both USB ports, and switch the
732 * selectable USB port to USB device mode. */
734 s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
735 S3C2410_MISCCR_USBSUSPND0 |
736 S3C2410_MISCCR_USBSUSPND1, 0x0);
738 tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT)
739 | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
740 | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
741 writel(tmp, S3C2410_UPLLCON);
743 gpio_request(S3C2410_GPC(0), "LCD power");
744 gpio_request(S3C2410_GPC(1), "LCD power");
745 gpio_request(S3C2410_GPC(4), "LCD power");
746 gpio_request(S3C2410_GPC(5), "LCD power");
747 gpio_request(S3C2410_GPC(6), "LCD power");
748 gpio_request(H1940_LATCH_LCD_P0, "LCD power");
749 gpio_request(H1940_LATCH_LCD_P1, "LCD power");
750 gpio_request(H1940_LATCH_LCD_P2, "LCD power");
751 gpio_request(H1940_LATCH_LCD_P3, "LCD power");
752 gpio_request(H1940_LATCH_LCD_P4, "LCD power");
753 gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
754 gpio_direction_output(S3C2410_GPC(0), 0);
755 gpio_direction_output(S3C2410_GPC(1), 0);
756 gpio_direction_output(S3C2410_GPC(4), 0);
757 gpio_direction_output(S3C2410_GPC(5), 0);
758 gpio_direction_input(S3C2410_GPC(6));
759 gpio_direction_output(H1940_LATCH_LCD_P0, 0);
760 gpio_direction_output(H1940_LATCH_LCD_P1, 0);
761 gpio_direction_output(H1940_LATCH_LCD_P2, 0);
762 gpio_direction_output(H1940_LATCH_LCD_P3, 0);
763 gpio_direction_output(H1940_LATCH_LCD_P4, 0);
764 gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
766 gpio_request(H1940_LATCH_SD_POWER, "SD power");
767 gpio_direction_output(H1940_LATCH_SD_POWER, 0);
769 pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
770 platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
772 gpio_request(S3C2410_GPA(1), "Red LED blink");
773 gpio_request(S3C2410_GPA(3), "Blue LED blink");
774 gpio_request(S3C2410_GPA(7), "Green LED blink");
775 gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
776 gpio_direction_output(S3C2410_GPA(1), 0);
777 gpio_direction_output(S3C2410_GPA(3), 0);
778 gpio_direction_output(S3C2410_GPA(7), 0);
779 gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
781 i2c_register_board_info(0, h1940_i2c_devices,
782 ARRAY_SIZE(h1940_i2c_devices));
785 MACHINE_START(H1940, "IPAQ-H1940")
786 /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
787 .atag_offset = 0x100,
788 .map_io = h1940_map_io,
789 .reserve = h1940_reserve,
790 .init_irq = s3c2410_init_irq,
791 .init_machine = h1940_init,
792 .init_time = h1940_init_time,