2 * arch/arm/mach-pxa/raumfeld.c
4 * Support for the following Raumfeld devices:
10 * See http://www.raumfeld.com for details.
12 * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
19 #include <linux/init.h>
20 #include <linux/kernel.h>
21 #include <linux/property.h>
22 #include <linux/platform_device.h>
23 #include <linux/interrupt.h>
24 #include <linux/gpio.h>
25 #include <linux/gpio/machine.h>
26 #include <linux/smsc911x.h>
27 #include <linux/input.h>
28 #include <linux/gpio_keys.h>
29 #include <linux/leds.h>
30 #include <linux/w1-gpio.h>
31 #include <linux/sched.h>
32 #include <linux/pwm.h>
33 #include <linux/pwm_backlight.h>
34 #include <linux/i2c.h>
35 #include <linux/platform_data/i2c-pxa.h>
36 #include <linux/spi/spi.h>
37 #include <linux/spi/spi_gpio.h>
38 #include <linux/lis3lv02d.h>
39 #include <linux/pda_power.h>
40 #include <linux/power_supply.h>
41 #include <linux/regulator/max8660.h>
42 #include <linux/regulator/machine.h>
43 #include <linux/regulator/fixed.h>
44 #include <linux/regulator/consumer.h>
45 #include <linux/delay.h>
47 #include <asm/system_info.h>
49 #include <asm/mach-types.h>
50 #include <asm/mach/arch.h>
53 #include <linux/platform_data/usb-ohci-pxa27x.h>
54 #include <linux/platform_data/video-pxafb.h>
55 #include <linux/platform_data/mmc-pxamci.h>
56 #include <linux/platform_data/mtd-nand-pxa3xx.h>
61 /* common GPIO definitions */
64 #define GPIO_ON_OFF (14)
65 #define GPIO_VOLENC_A (19)
66 #define GPIO_VOLENC_B (20)
67 #define GPIO_CHARGE_DONE (23)
68 #define GPIO_CHARGE_IND (27)
69 #define GPIO_TOUCH_IRQ (32)
70 #define GPIO_ETH_IRQ (40)
71 #define GPIO_SPI_MISO (98)
72 #define GPIO_ACCEL_IRQ (104)
73 #define GPIO_RESCUE_BOOT (115)
74 #define GPIO_DOCK_DETECT (116)
75 #define GPIO_KEY1 (117)
76 #define GPIO_KEY2 (118)
77 #define GPIO_KEY3 (119)
78 #define GPIO_CHARGE_USB_OK (112)
79 #define GPIO_CHARGE_DC_OK (101)
80 #define GPIO_CHARGE_USB_SUSP (102)
83 #define GPIO_SHUTDOWN_SUPPLY (16)
84 #define GPIO_SHUTDOWN_BATT (18)
85 #define GPIO_CHRG_PEN2 (31)
86 #define GPIO_TFT_VA_EN (33)
87 #define GPIO_SPDIF_CS (34)
88 #define GPIO_LED2 (35)
89 #define GPIO_LED1 (36)
90 #define GPIO_SPDIF_RESET (38)
91 #define GPIO_SPI_CLK (95)
92 #define GPIO_MCLK_DAC_CS (96)
93 #define GPIO_SPI_MOSI (97)
94 #define GPIO_W1_PULLUP_ENABLE (105)
95 #define GPIO_DISPLAY_ENABLE (106)
96 #define GPIO_MCLK_RESET (111)
97 #define GPIO_W2W_RESET (113)
98 #define GPIO_W2W_PDN (114)
99 #define GPIO_CODEC_RESET (120)
100 #define GPIO_AUDIO_VA_ENABLE (124)
101 #define GPIO_ACCEL_CS (125)
102 #define GPIO_ONE_WIRE (126)
105 * GPIO configurations
107 static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
124 GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
125 GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
128 GPIO34_GPIO, /* SPDIF_CS */
129 GPIO96_GPIO, /* MCLK_CS */
130 GPIO125_GPIO, /* ACCEL_CS */
141 GPIO126_GPIO | MFP_LPM_FLOAT,
142 GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
145 GPIO101_GPIO | MFP_PULL_HIGH,
147 GPIO112_GPIO | MFP_PULL_HIGH,
153 GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
180 static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
197 GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
198 GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
201 GPIO34_GPIO, /* SPDIF_CS */
202 GPIO96_GPIO, /* MCLK_CS */
203 GPIO125_GPIO, /* ACCEL_CS */
215 GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */
225 /* SSP2 for S/PDIF */
232 GPIO35_GPIO | MFP_LPM_PULL_LOW,
233 GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
236 static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
253 GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
254 GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
257 GPIO34_GPIO, /* SPDIF_CS */
258 GPIO96_GPIO, /* MCLK_CS */
259 GPIO125_GPIO, /* ACCEL_CS */
271 GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */
282 GPIO35_GPIO | MFP_LPM_PULL_LOW,
283 GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
287 * SMSC LAN9220 Ethernet
290 static struct resource smc91x_resources[] = {
292 .start = PXA3xx_CS2_PHYS,
293 .end = PXA3xx_CS2_PHYS + 0xfffff,
294 .flags = IORESOURCE_MEM,
297 .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
298 .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
299 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
303 static struct smsc911x_platform_config raumfeld_smsc911x_config = {
304 .phy_interface = PHY_INTERFACE_MODE_MII,
305 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
306 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
307 .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
310 static struct platform_device smc91x_device = {
313 .num_resources = ARRAY_SIZE(smc91x_resources),
314 .resource = smc91x_resources,
316 .platform_data = &raumfeld_smsc911x_config,
324 static struct mtd_partition raumfeld_nand_partitions[] = {
326 .name = "Bootloader",
329 .mask_flags = MTD_WRITEABLE, /* force read-only */
332 .name = "BootloaderEnvironment",
337 .name = "BootloaderSplashScreen",
344 .size = MTDPART_SIZ_FULL,
348 static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
350 .parts = raumfeld_nand_partitions,
351 .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions),
358 static struct pxaohci_platform_data raumfeld_ohci_info = {
359 .port_mode = PMM_GLOBAL_MODE,
360 .flags = ENABLE_PORT1,
364 * Rotary encoder input device
367 static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
368 .dev_id = "rotary-encoder.0",
370 GPIO_LOOKUP_IDX("gpio-0",
371 GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW),
372 GPIO_LOOKUP_IDX("gpio-0",
373 GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH),
378 static const struct property_entry raumfeld_rotary_properties[] __initconst = {
379 PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
380 PROPERTY_ENTRY_U32("linux,axis", REL_X),
381 PROPERTY_ENTRY_U32("rotary-encoder,relative_axis", 1),
385 static struct platform_device rotary_encoder_device = {
386 .name = "rotary-encoder",
394 static struct gpio_keys_button gpio_keys_button[] = {
401 .debounce_interval = 5, /* ms */
410 .debounce_interval = 5, /* ms */
419 .debounce_interval = 5, /* ms */
425 .gpio = GPIO_RESCUE_BOOT,
428 .debounce_interval = 5, /* ms */
429 .desc = "rescue boot button",
434 .gpio = GPIO_DOCK_DETECT,
437 .debounce_interval = 5, /* ms */
438 .desc = "dock detect",
446 .debounce_interval = 5, /* ms */
447 .desc = "on_off button",
451 static struct gpio_keys_platform_data gpio_keys_platform_data = {
452 .buttons = gpio_keys_button,
453 .nbuttons = ARRAY_SIZE(gpio_keys_button),
457 static struct platform_device raumfeld_gpio_keys_device = {
461 .platform_data = &gpio_keys_platform_data,
469 static struct gpio_led raumfeld_leds[] = {
471 .name = "raumfeld:1",
474 .default_state = LEDS_GPIO_DEFSTATE_ON,
477 .name = "raumfeld:2",
480 .default_state = LEDS_GPIO_DEFSTATE_OFF,
484 static struct gpio_led_platform_data raumfeld_led_platform_data = {
485 .leds = raumfeld_leds,
486 .num_leds = ARRAY_SIZE(raumfeld_leds),
489 static struct platform_device raumfeld_led_device = {
493 .platform_data = &raumfeld_led_platform_data,
498 * One-wire (W1 bus) support
501 static void w1_enable_external_pullup(int enable)
503 gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
507 static struct gpiod_lookup_table raumfeld_w1_gpiod_table = {
510 GPIO_LOOKUP_IDX("gpio-pxa", GPIO_ONE_WIRE, NULL, 0,
511 GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
515 static struct w1_gpio_platform_data w1_gpio_platform_data = {
516 .enable_external_pullup = w1_enable_external_pullup,
519 static struct platform_device raumfeld_w1_gpio_device = {
522 .platform_data = &w1_gpio_platform_data
526 static void __init raumfeld_w1_init(void)
528 int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
529 "W1 external pullup enable");
532 pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n");
534 gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
536 gpiod_add_lookup_table(&raumfeld_w1_gpiod_table);
537 platform_device_register(&raumfeld_w1_gpio_device);
544 static struct pwm_lookup raumfeld_pwm_lookup[] = {
545 PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
546 PWM_POLARITY_NORMAL),
549 /* PWM controlled backlight */
550 static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
551 .max_brightness = 100,
552 .dft_brightness = 100,
556 static struct platform_device raumfeld_pwm_backlight_device = {
557 .name = "pwm-backlight",
559 .parent = &pxa27x_device_pwm0.dev,
560 .platform_data = &raumfeld_pwm_backlight_data,
564 /* LT3593 controlled backlight */
565 static struct gpio_led raumfeld_lt3593_led = {
567 .gpio = mfp_to_gpio(MFP_PIN_GPIO17),
568 .default_state = LEDS_GPIO_DEFSTATE_ON,
571 static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
572 .leds = &raumfeld_lt3593_led,
576 static struct platform_device raumfeld_lt3593_device = {
577 .name = "leds-lt3593",
580 .platform_data = &raumfeld_lt3593_platform_data,
584 static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
598 static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
599 .modes = &sharp_lq043t3dx02_mode,
601 .video_mem_size = 0x400000,
602 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
603 #ifdef CONFIG_PXA3XX_GCU
604 .acceleration_enabled = 1,
608 static void __init raumfeld_lcd_init(void)
612 ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
614 pr_warn("Unable to request GPIO_TFT_VA_EN\n");
616 gpio_direction_output(GPIO_TFT_VA_EN, 1);
620 ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
622 pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n");
624 gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
626 /* Hardware revision 2 has the backlight regulator controlled
627 * by an LT3593, earlier and later devices use PWM for that. */
628 if ((system_rev & 0xff) == 2) {
629 platform_device_register(&raumfeld_lt3593_device);
631 mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
632 pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
633 pwm_add_table(raumfeld_pwm_lookup,
634 ARRAY_SIZE(raumfeld_pwm_lookup));
635 platform_device_register(&raumfeld_pwm_backlight_device);
638 pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
639 platform_device_register(&pxa3xx_device_gcu);
646 static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
650 static struct platform_device raumfeld_spi_device = {
654 .platform_data = &raumfeld_spi_platform_data,
658 static struct gpiod_lookup_table raumfeld_spi_gpiod_table = {
659 .dev_id = "spi_gpio",
661 GPIO_LOOKUP("gpio-0", GPIO_SPI_CLK,
662 "sck", GPIO_ACTIVE_HIGH),
663 GPIO_LOOKUP("gpio-0", GPIO_SPI_MOSI,
664 "mosi", GPIO_ACTIVE_HIGH),
665 GPIO_LOOKUP("gpio-0", GPIO_SPI_MISO,
666 "miso", GPIO_ACTIVE_HIGH),
667 GPIO_LOOKUP_IDX("gpio-0", GPIO_SPDIF_CS,
668 "cs", 0, GPIO_ACTIVE_HIGH),
669 GPIO_LOOKUP_IDX("gpio-0", GPIO_ACCEL_CS,
670 "cs", 1, GPIO_ACTIVE_HIGH),
671 GPIO_LOOKUP_IDX("gpio-0", GPIO_MCLK_DAC_CS,
672 "cs", 2, GPIO_ACTIVE_HIGH),
677 static struct lis3lv02d_platform_data lis3_pdata = {
678 .click_flags = LIS3_CLICK_SINGLE_X |
679 LIS3_CLICK_SINGLE_Y |
681 .irq_cfg = LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
682 .wakeup_flags = LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
683 LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
684 LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
686 .click_thresh_x = 10,
687 .click_thresh_y = 10,
688 .click_thresh_z = 10,
693 .modalias = "ak4104-codec", \
694 .max_speed_hz = 10000, \
701 .modalias = "lis3lv02d_spi", \
702 .max_speed_hz = 1000000, \
705 .platform_data = &lis3_pdata, \
706 .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \
709 #define SPI_DAC7512 \
711 .modalias = "dac7512", \
712 .max_speed_hz = 1000000, \
717 static struct spi_board_info connector_spi_devices[] __initdata = {
722 static struct spi_board_info speaker_spi_devices[] __initdata = {
726 static struct spi_board_info controller_spi_devices[] __initdata = {
731 * MMC for Marvell Libertas 8688 via SDIO
734 static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
736 gpio_set_value(GPIO_W2W_RESET, 1);
737 gpio_set_value(GPIO_W2W_PDN, 1);
742 static void raumfeld_mci_exit(struct device *dev, void *data)
744 gpio_set_value(GPIO_W2W_RESET, 0);
745 gpio_set_value(GPIO_W2W_PDN, 0);
748 static struct pxamci_platform_data raumfeld_mci_platform_data = {
749 .init = raumfeld_mci_init,
750 .exit = raumfeld_mci_exit,
751 .detect_delay_ms = 200,
752 .gpio_card_detect = -1,
758 * External power / charge logic
761 static int power_supply_init(struct device *dev)
766 static void power_supply_exit(struct device *dev)
770 static int raumfeld_is_ac_online(void)
772 return !gpio_get_value(GPIO_CHARGE_DC_OK);
775 static int raumfeld_is_usb_online(void)
780 static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
782 static void raumfeld_power_signal_charged(void)
784 struct power_supply *psy =
785 power_supply_get_by_name(raumfeld_power_supplicants[0]);
788 power_supply_set_battery_charged(psy);
789 power_supply_put(psy);
793 static int raumfeld_power_resume(void)
795 /* check if GPIO_CHARGE_DONE went low while we were sleeping */
796 if (!gpio_get_value(GPIO_CHARGE_DONE))
797 raumfeld_power_signal_charged();
802 static struct pda_power_pdata power_supply_info = {
803 .init = power_supply_init,
804 .is_ac_online = raumfeld_is_ac_online,
805 .is_usb_online = raumfeld_is_usb_online,
806 .exit = power_supply_exit,
807 .supplied_to = raumfeld_power_supplicants,
808 .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants),
809 .resume = raumfeld_power_resume,
812 static struct resource power_supply_resources[] = {
815 .flags = IORESOURCE_IRQ |
816 IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
817 .start = GPIO_CHARGE_DC_OK,
818 .end = GPIO_CHARGE_DC_OK,
822 static irqreturn_t charge_done_irq(int irq, void *dev_id)
824 raumfeld_power_signal_charged();
828 static struct platform_device raumfeld_power_supply = {
832 .platform_data = &power_supply_info,
834 .resource = power_supply_resources,
835 .num_resources = ARRAY_SIZE(power_supply_resources),
838 static void __init raumfeld_power_init(void)
842 /* Set PEN2 high to enable maximum charge current */
843 ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
845 pr_warn("Unable to request GPIO_CHRG_PEN2\n");
847 gpio_direction_output(GPIO_CHRG_PEN2, 1);
849 ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
851 pr_warn("Unable to request GPIO_CHARGE_DC_OK\n");
853 ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
855 pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n");
857 gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
859 power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
860 power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
862 ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
863 &charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
864 "charge_done", NULL);
867 printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
870 platform_device_register(&raumfeld_power_supply);
873 /* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
875 static struct regulator_consumer_supply audio_va_consumer_supply =
876 REGULATOR_SUPPLY("va", "0-0048");
878 static struct regulator_init_data audio_va_initdata = {
879 .consumer_supplies = &audio_va_consumer_supply,
880 .num_consumer_supplies = 1,
882 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
886 static struct fixed_voltage_config audio_va_config = {
887 .supply_name = "audio_va",
888 .microvolts = 5000000,
889 .gpio = GPIO_AUDIO_VA_ENABLE,
891 .enabled_at_boot = 0,
892 .init_data = &audio_va_initdata,
895 static struct platform_device audio_va_device = {
896 .name = "reg-fixed-voltage",
899 .platform_data = &audio_va_config,
903 /* Dummy supplies for Codec's VD/VLC */
905 static struct regulator_consumer_supply audio_dummy_supplies[] = {
906 REGULATOR_SUPPLY("vd", "0-0048"),
907 REGULATOR_SUPPLY("vlc", "0-0048"),
910 static struct regulator_init_data audio_dummy_initdata = {
911 .consumer_supplies = audio_dummy_supplies,
912 .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
914 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
918 static struct fixed_voltage_config audio_dummy_config = {
919 .supply_name = "audio_vd",
920 .microvolts = 3300000,
922 .init_data = &audio_dummy_initdata,
925 static struct platform_device audio_supply_dummy_device = {
926 .name = "reg-fixed-voltage",
929 .platform_data = &audio_dummy_config,
933 static struct platform_device *audio_regulator_devices[] = {
935 &audio_supply_dummy_device,
939 * Regulator support via MAX8660
942 static struct regulator_consumer_supply vcc_mmc_supply =
943 REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
945 static struct regulator_init_data vcc_mmc_init_data = {
949 .valid_modes_mask = REGULATOR_MODE_NORMAL,
950 .valid_ops_mask = REGULATOR_CHANGE_STATUS |
951 REGULATOR_CHANGE_VOLTAGE |
952 REGULATOR_CHANGE_MODE,
954 .consumer_supplies = &vcc_mmc_supply,
955 .num_consumer_supplies = 1,
958 static struct max8660_subdev_data max8660_v6_subdev_data = {
961 .platform_data = &vcc_mmc_init_data,
964 static struct max8660_platform_data max8660_pdata = {
965 .subdevs = &max8660_v6_subdev_data,
973 static struct i2c_board_info raumfeld_pwri2c_board_info = {
976 .platform_data = &max8660_pdata,
979 static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
984 static struct gpiod_lookup_table raumfeld_controller_gpios_table = {
987 GPIO_LOOKUP("gpio-pxa",
988 GPIO_TOUCH_IRQ, "attn", GPIO_ACTIVE_HIGH),
993 static const struct resource raumfeld_controller_resources[] __initconst = {
995 .start = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
996 .end = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
997 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
1001 static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
1004 .resources = raumfeld_controller_resources,
1005 .num_resources = ARRAY_SIZE(raumfeld_controller_resources),
1008 static struct platform_device *raumfeld_common_devices[] = {
1009 &raumfeld_gpio_keys_device,
1010 &raumfeld_led_device,
1011 &raumfeld_spi_device,
1014 static void __init raumfeld_audio_init(void)
1018 ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
1020 pr_warn("unable to request GPIO_CODEC_RESET\n");
1022 gpio_direction_output(GPIO_CODEC_RESET, 1);
1024 ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
1026 pr_warn("unable to request GPIO_SPDIF_RESET\n");
1028 gpio_direction_output(GPIO_SPDIF_RESET, 1);
1030 ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
1032 pr_warn("unable to request GPIO_MCLK_RESET\n");
1034 gpio_direction_output(GPIO_MCLK_RESET, 1);
1036 platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
1039 static void __init raumfeld_common_init(void)
1043 /* The on/off button polarity has changed after revision 1 */
1044 if ((system_rev & 0xff) > 1) {
1047 for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
1048 if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
1049 gpio_keys_button[i].active_low = 1;
1052 enable_irq_wake(IRQ_WAKEUP0);
1054 pxa3xx_set_nand_info(&raumfeld_nand_info);
1055 pxa3xx_set_i2c_power_info(NULL);
1056 pxa_set_ohci_info(&raumfeld_ohci_info);
1057 pxa_set_mci_info(&raumfeld_mci_platform_data);
1058 pxa_set_i2c_info(NULL);
1059 pxa_set_ffuart_info(NULL);
1061 ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
1063 pr_warn("Unable to request GPIO_W2W_RESET\n");
1065 gpio_direction_output(GPIO_W2W_RESET, 0);
1067 ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
1069 pr_warn("Unable to request GPIO_W2W_PDN\n");
1071 gpio_direction_output(GPIO_W2W_PDN, 0);
1073 /* this can be used to switch off the device */
1074 ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
1076 pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
1078 gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
1080 gpiod_add_lookup_table(&raumfeld_spi_gpiod_table);
1081 platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
1082 i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
1085 static void __init __maybe_unused raumfeld_controller_init(void)
1089 pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
1091 gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
1092 device_add_properties(&rotary_encoder_device.dev,
1093 raumfeld_rotary_properties);
1094 platform_device_register(&rotary_encoder_device);
1096 spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
1098 gpiod_add_lookup_table(&raumfeld_controller_gpios_table);
1099 i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
1101 ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
1103 pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n");
1105 gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
1107 raumfeld_common_init();
1108 raumfeld_power_init();
1109 raumfeld_lcd_init();
1113 static void __init __maybe_unused raumfeld_connector_init(void)
1115 pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
1116 spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
1117 i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
1119 platform_device_register(&smc91x_device);
1121 raumfeld_audio_init();
1122 raumfeld_common_init();
1125 static void __init __maybe_unused raumfeld_speaker_init(void)
1127 pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
1128 spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
1129 i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
1131 platform_device_register(&smc91x_device);
1133 gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
1134 device_add_properties(&rotary_encoder_device.dev,
1135 raumfeld_rotary_properties);
1136 platform_device_register(&rotary_encoder_device);
1138 raumfeld_audio_init();
1139 raumfeld_common_init();
1142 /* physical memory regions */
1143 #define RAUMFELD_SDRAM_BASE 0xa0000000 /* SDRAM region */
1145 #ifdef CONFIG_MACH_RAUMFELD_RC
1146 MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
1147 .atag_offset = 0x100,
1148 .init_machine = raumfeld_controller_init,
1149 .map_io = pxa3xx_map_io,
1150 .nr_irqs = PXA_NR_IRQS,
1151 .init_irq = pxa3xx_init_irq,
1152 .handle_irq = pxa3xx_handle_irq,
1153 .init_time = pxa_timer_init,
1154 .restart = pxa_restart,
1158 #ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
1159 MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
1160 .atag_offset = 0x100,
1161 .init_machine = raumfeld_connector_init,
1162 .map_io = pxa3xx_map_io,
1163 .nr_irqs = PXA_NR_IRQS,
1164 .init_irq = pxa3xx_init_irq,
1165 .handle_irq = pxa3xx_handle_irq,
1166 .init_time = pxa_timer_init,
1167 .restart = pxa_restart,
1171 #ifdef CONFIG_MACH_RAUMFELD_SPEAKER
1172 MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
1173 .atag_offset = 0x100,
1174 .init_machine = raumfeld_speaker_init,
1175 .map_io = pxa3xx_map_io,
1176 .nr_irqs = PXA_NR_IRQS,
1177 .init_irq = pxa3xx_init_irq,
1178 .handle_irq = pxa3xx_handle_irq,
1179 .init_time = pxa_timer_init,
1180 .restart = pxa_restart,