1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * arch/arm/mach-iop32x/iq80321.c
5 * Board support code for the Intel IQ80321 platform.
7 * Author: Rory Bolt <rorybolt@pacbell.net>
8 * Copyright (C) 2002 Rory Bolt
9 * Copyright (C) 2004 Intel Corp.
13 #include <linux/init.h>
14 #include <linux/kernel.h>
15 #include <linux/pci.h>
16 #include <linux/string.h>
17 #include <linux/serial_core.h>
18 #include <linux/serial_8250.h>
19 #include <linux/mtd/physmap.h>
20 #include <linux/platform_device.h>
22 #include <linux/gpio/machine.h>
24 #include <asm/mach/arch.h>
25 #include <asm/mach/map.h>
26 #include <asm/mach/pci.h>
27 #include <asm/mach/time.h>
28 #include <asm/mach-types.h>
30 #include <asm/pgtable.h>
34 #include "gpio-iop32x.h"
37 * IQ80321 timer tick configuration.
39 static void __init iq80321_timer_init(void)
41 /* 33.333 MHz crystal. */
42 iop_init_time(200000000);
49 static struct map_desc iq80321_io_desc[] __initdata = {
50 { /* on-board devices */
51 .virtual = IQ80321_UART,
52 .pfn = __phys_to_pfn(IQ80321_UART),
58 void __init iq80321_map_io(void)
61 iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
69 iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
73 if ((slot == 2 || slot == 6) && pin == 1) {
75 irq = IRQ_IOP32X_XINT2;
76 } else if ((slot == 2 || slot == 6) && pin == 2) {
78 irq = IRQ_IOP32X_XINT3;
79 } else if ((slot == 2 || slot == 6) && pin == 3) {
81 irq = IRQ_IOP32X_XINT0;
82 } else if ((slot == 2 || slot == 6) && pin == 4) {
84 irq = IRQ_IOP32X_XINT1;
85 } else if (slot == 4 || slot == 8) {
87 irq = IRQ_IOP32X_XINT0;
89 printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
90 "device PCI:%d:%d:%d\n", dev->bus->number,
91 PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
98 static struct hw_pci iq80321_pci __initdata = {
101 .setup = iop3xx_pci_setup,
102 .preinit = iop3xx_pci_preinit_cond,
103 .map_irq = iq80321_pci_map_irq,
106 static int __init iq80321_pci_init(void)
108 if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
109 machine_is_iq80321())
110 pci_common_init(&iq80321_pci);
115 subsys_initcall(iq80321_pci_init);
119 * IQ80321 machine initialisation.
121 static struct physmap_flash_data iq80321_flash_data = {
125 static struct resource iq80321_flash_resource = {
128 .flags = IORESOURCE_MEM,
131 static struct platform_device iq80321_flash_device = {
132 .name = "physmap-flash",
135 .platform_data = &iq80321_flash_data,
138 .resource = &iq80321_flash_resource,
141 static struct plat_serial8250_port iq80321_serial_port[] = {
143 .mapbase = IQ80321_UART,
144 .membase = (char *)IQ80321_UART,
145 .irq = IRQ_IOP32X_XINT1,
146 .flags = UPF_SKIP_TEST,
154 static struct resource iq80321_uart_resource = {
155 .start = IQ80321_UART,
156 .end = IQ80321_UART + 7,
157 .flags = IORESOURCE_MEM,
160 static struct platform_device iq80321_serial_device = {
161 .name = "serial8250",
162 .id = PLAT8250_DEV_PLATFORM,
164 .platform_data = iq80321_serial_port,
167 .resource = &iq80321_uart_resource,
170 static void __init iq80321_init_machine(void)
172 register_iop32x_gpio();
173 gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
174 gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
175 platform_device_register(&iop3xx_i2c0_device);
176 platform_device_register(&iop3xx_i2c1_device);
177 platform_device_register(&iq80321_flash_device);
178 platform_device_register(&iq80321_serial_device);
179 platform_device_register(&iop3xx_dma_0_channel);
180 platform_device_register(&iop3xx_dma_1_channel);
181 platform_device_register(&iop3xx_aau_channel);
184 MACHINE_START(IQ80321, "Intel IQ80321")
185 /* Maintainer: Intel Corp. */
186 .atag_offset = 0x100,
187 .map_io = iq80321_map_io,
188 .init_irq = iop32x_init_irq,
189 .init_time = iq80321_timer_init,
190 .init_machine = iq80321_init_machine,
191 .restart = iop3xx_restart,