2 * Critical Link MityOMAP-L138 SoM
4 * Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com
6 * This file is licensed under the terms of the GNU General Public License
7 * version 2. This program is licensed "as is" without any warranty of
8 * any kind, whether express or implied.
11 #define pr_fmt(fmt) "MityOMAPL138: " fmt
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/console.h>
16 #include <linux/platform_device.h>
17 #include <linux/property.h>
18 #include <linux/mtd/partitions.h>
19 #include <linux/notifier.h>
20 #include <linux/nvmem-consumer.h>
21 #include <linux/nvmem-provider.h>
22 #include <linux/regulator/machine.h>
23 #include <linux/i2c.h>
24 #include <linux/etherdevice.h>
25 #include <linux/spi/spi.h>
26 #include <linux/spi/flash.h>
29 #include <asm/mach-types.h>
30 #include <asm/mach/arch.h>
31 #include <mach/common.h>
32 #include <mach/da8xx.h>
33 #include <linux/platform_data/mtd-davinci.h>
34 #include <linux/platform_data/mtd-davinci-aemif.h>
35 #include <linux/platform_data/ti-aemif.h>
37 #include <linux/platform_data/spi-davinci.h>
39 #define MITYOMAPL138_PHY_ID ""
41 #define FACTORY_CONFIG_MAGIC 0x012C0138
42 #define FACTORY_CONFIG_VERSION 0x00010001
44 /* Data Held in On-Board I2C device */
45 struct factory_config {
55 static struct factory_config factory_config;
57 #ifdef CONFIG_CPU_FREQ
59 const char *part_no; /* part number string of interest */
60 int max_freq; /* khz */
63 static struct part_no_info mityomapl138_pn_info[] = {
94 static void mityomapl138_cpufreq_init(const char *partnum)
98 for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) {
100 * the part number has additional characters beyond what is
101 * stored in the table. This information is not needed for
102 * determining the speed grade, and would require several
103 * more table entries. Only check the first N characters
106 if (!strncmp(partnum, mityomapl138_pn_info[i].part_no,
107 strlen(mityomapl138_pn_info[i].part_no))) {
108 da850_max_speed = mityomapl138_pn_info[i].max_freq;
113 ret = da850_register_cpufreq("pll0_sysclk3");
115 pr_warn("cpufreq registration failed: %d\n", ret);
118 static void mityomapl138_cpufreq_init(const char *partnum) { }
121 static int read_factory_config(struct notifier_block *nb,
122 unsigned long event, void *data)
125 const char *partnum = NULL;
126 struct nvmem_device *nvmem = data;
128 if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0)
131 if (!IS_BUILTIN(CONFIG_NVMEM)) {
132 pr_warn("Factory Config not available without CONFIG_NVMEM\n");
136 ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
138 if (ret != sizeof(struct factory_config)) {
139 pr_warn("Read Factory Config Failed: %d\n", ret);
143 if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
144 pr_warn("Factory Config Magic Wrong (%X)\n",
145 factory_config.magic);
149 if (factory_config.version != FACTORY_CONFIG_VERSION) {
150 pr_warn("Factory Config Version Wrong (%X)\n",
151 factory_config.version);
155 partnum = factory_config.partnum;
156 pr_info("Part Number = %s\n", partnum);
159 /* default maximum speed is valid for all platforms */
160 mityomapl138_cpufreq_init(partnum);
165 static struct notifier_block mityomapl138_nvmem_notifier = {
166 .notifier_call = read_factory_config,
170 * We don't define a cell for factory config as it will be accessed from the
171 * board file using the nvmem notifier chain.
173 static struct nvmem_cell_info mityomapl138_nvmem_cells[] = {
181 static struct nvmem_cell_table mityomapl138_nvmem_cell_table = {
182 .nvmem_name = "1-00500",
183 .cells = mityomapl138_nvmem_cells,
184 .ncells = ARRAY_SIZE(mityomapl138_nvmem_cells),
187 static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
188 .nvmem_name = "1-00500",
189 .cell_name = "macaddr",
190 .dev_id = "davinci_emac.1",
191 .con_id = "mac-address",
194 static const struct property_entry mityomapl138_fd_chip_properties[] = {
195 PROPERTY_ENTRY_U32("pagesize", 8),
196 PROPERTY_ENTRY_BOOL("read-only"),
200 static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
201 .bus_freq = 100, /* kHz */
202 .bus_delay = 0, /* usec */
205 /* TPS65023 voltage regulator support */
207 static struct regulator_consumer_supply tps65023_dcdc1_consumers[] = {
214 static struct regulator_consumer_supply tps65023_dcdc2_consumers[] = {
216 .supply = "usb0_vdda18",
219 .supply = "usb1_vdda18",
222 .supply = "ddr_dvdd18",
225 .supply = "sata_vddr",
230 static struct regulator_consumer_supply tps65023_dcdc3_consumers[] = {
232 .supply = "sata_vdd",
235 .supply = "usb_cvdd",
238 .supply = "pll0_vdda",
241 .supply = "pll1_vdda",
245 /* 1.8V Aux LDO, not used */
246 static struct regulator_consumer_supply tps65023_ldo1_consumers[] = {
248 .supply = "1.8v_aux",
252 /* FPGA VCC Aux (2.5 or 3.3) LDO */
253 static struct regulator_consumer_supply tps65023_ldo2_consumers[] = {
259 static struct regulator_init_data tps65023_regulator_data[] = {
265 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
266 REGULATOR_CHANGE_STATUS,
269 .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers),
270 .consumer_supplies = tps65023_dcdc1_consumers,
277 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
280 .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers),
281 .consumer_supplies = tps65023_dcdc2_consumers,
288 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
291 .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers),
292 .consumer_supplies = tps65023_dcdc3_consumers,
299 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
302 .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers),
303 .consumer_supplies = tps65023_ldo1_consumers,
310 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
311 REGULATOR_CHANGE_STATUS,
314 .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers),
315 .consumer_supplies = tps65023_ldo2_consumers,
319 static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
321 I2C_BOARD_INFO("tps65023", 0x48),
322 .platform_data = &tps65023_regulator_data[0],
325 I2C_BOARD_INFO("24c02", 0x50),
326 .properties = mityomapl138_fd_chip_properties,
330 static int __init pmic_tps65023_init(void)
332 return i2c_register_board_info(1, mityomap_tps65023_info,
333 ARRAY_SIZE(mityomap_tps65023_info));
338 * SPI1_CS0: 8M Flash ST-M25P64-VME6G
340 static struct mtd_partition spi_flash_partitions[] = {
345 .mask_flags = MTD_WRITEABLE,
349 .offset = MTDPART_OFS_APPEND,
351 .mask_flags = MTD_WRITEABLE,
354 .name = "u-boot-env",
355 .offset = MTDPART_OFS_APPEND,
357 .mask_flags = MTD_WRITEABLE,
360 .name = "periph-config",
361 .offset = MTDPART_OFS_APPEND,
363 .mask_flags = MTD_WRITEABLE,
367 .offset = MTDPART_OFS_APPEND,
368 .size = SZ_256K + SZ_64K,
372 .offset = MTDPART_OFS_APPEND,
373 .size = SZ_2M + SZ_1M,
377 .offset = MTDPART_OFS_APPEND,
382 .offset = MTDPART_OFS_APPEND,
383 .size = MTDPART_SIZ_FULL,
387 static struct flash_platform_data mityomapl138_spi_flash_data = {
389 .parts = spi_flash_partitions,
390 .nr_parts = ARRAY_SIZE(spi_flash_partitions),
394 static struct davinci_spi_config spi_eprom_config = {
395 .io_type = SPI_IO_TYPE_DMA,
400 static struct spi_board_info mityomapl138_spi_flash_info[] = {
402 .modalias = "m25p80",
403 .platform_data = &mityomapl138_spi_flash_data,
404 .controller_data = &spi_eprom_config,
406 .max_speed_hz = 30000000,
413 * MityDSP-L138 includes a 256 MByte large-page NAND flash
416 static struct mtd_partition mityomapl138_nandflash_partition[] = {
421 .mask_flags = 0, /* MTD_WRITEABLE, */
425 .offset = MTDPART_OFS_APPEND,
426 .size = MTDPART_SIZ_FULL,
431 static struct davinci_nand_pdata mityomapl138_nandflash_data = {
433 .parts = mityomapl138_nandflash_partition,
434 .nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
435 .ecc_mode = NAND_ECC_HW,
436 .bbt_options = NAND_BBT_USE_FLASH,
437 .options = NAND_BUSWIDTH_16,
438 .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
441 static struct resource mityomapl138_nandflash_resource[] = {
443 .start = DA8XX_AEMIF_CS3_BASE,
444 .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
445 .flags = IORESOURCE_MEM,
448 .start = DA8XX_AEMIF_CTL_BASE,
449 .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
450 .flags = IORESOURCE_MEM,
454 static struct platform_device mityomapl138_aemif_devices[] = {
456 .name = "davinci_nand",
459 .platform_data = &mityomapl138_nandflash_data,
461 .num_resources = ARRAY_SIZE(mityomapl138_nandflash_resource),
462 .resource = mityomapl138_nandflash_resource,
466 static struct resource mityomapl138_aemif_resources[] = {
468 .start = DA8XX_AEMIF_CTL_BASE,
469 .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
470 .flags = IORESOURCE_MEM,
474 static struct aemif_abus_data mityomapl138_aemif_abus_data[] = {
480 static struct aemif_platform_data mityomapl138_aemif_pdata = {
481 .abus_data = mityomapl138_aemif_abus_data,
482 .num_abus_data = ARRAY_SIZE(mityomapl138_aemif_abus_data),
483 .sub_devices = mityomapl138_aemif_devices,
484 .num_sub_devices = ARRAY_SIZE(mityomapl138_aemif_devices),
487 static struct platform_device mityomapl138_aemif_device = {
491 .platform_data = &mityomapl138_aemif_pdata,
493 .resource = mityomapl138_aemif_resources,
494 .num_resources = ARRAY_SIZE(mityomapl138_aemif_resources),
497 static void __init mityomapl138_setup_nand(void)
499 if (platform_device_register(&mityomapl138_aemif_device))
500 pr_warn("%s: Cannot register AEMIF device\n", __func__);
503 static const short mityomap_mii_pins[] = {
504 DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
505 DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
506 DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
507 DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
512 static const short mityomap_rmii_pins[] = {
513 DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
514 DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
515 DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
520 static void __init mityomapl138_config_emac(void)
522 void __iomem *cfg_chip3_base;
525 struct davinci_soc_info *soc_info = &davinci_soc_info;
527 soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */
529 cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
530 val = __raw_readl(cfg_chip3_base);
532 if (soc_info->emac_pdata->rmii_en) {
534 ret = davinci_cfg_reg_list(mityomap_rmii_pins);
535 pr_info("RMII PHY configured\n");
538 ret = davinci_cfg_reg_list(mityomap_mii_pins);
539 pr_info("MII PHY configured\n");
543 pr_warn("mii/rmii mux setup failed: %d\n", ret);
547 /* configure the CFGCHIP3 register for RMII or MII */
548 __raw_writel(val, cfg_chip3_base);
550 soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID;
552 ret = da8xx_register_emac();
554 pr_warn("emac registration failed: %d\n", ret);
557 static void __init mityomapl138_init(void)
561 da850_register_clocks();
563 /* for now, no special EDMA channels are reserved */
564 ret = da850_register_edma(NULL);
566 pr_warn("edma registration failed: %d\n", ret);
568 ret = da8xx_register_watchdog();
570 pr_warn("watchdog registration failed: %d\n", ret);
572 davinci_serial_init(da8xx_serial_device);
574 nvmem_register_notifier(&mityomapl138_nvmem_notifier);
575 nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
576 nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
578 ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
580 pr_warn("i2c0 registration failed: %d\n", ret);
582 ret = pmic_tps65023_init();
584 pr_warn("TPS65023 PMIC init failed: %d\n", ret);
586 mityomapl138_setup_nand();
588 ret = spi_register_board_info(mityomapl138_spi_flash_info,
589 ARRAY_SIZE(mityomapl138_spi_flash_info));
591 pr_warn("spi info registration failed: %d\n", ret);
593 ret = da8xx_register_spi_bus(1,
594 ARRAY_SIZE(mityomapl138_spi_flash_info));
596 pr_warn("spi 1 registration failed: %d\n", ret);
598 mityomapl138_config_emac();
600 ret = da8xx_register_rtc();
602 pr_warn("rtc setup failed: %d\n", ret);
604 ret = da8xx_register_cpuidle();
606 pr_warn("cpuidle registration failed: %d\n", ret);
611 #ifdef CONFIG_SERIAL_8250_CONSOLE
612 static int __init mityomapl138_console_init(void)
614 if (!machine_is_mityomapl138())
617 return add_preferred_console("ttyS", 1, "115200");
619 console_initcall(mityomapl138_console_init);
622 static void __init mityomapl138_map_io(void)
627 MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
628 .atag_offset = 0x100,
629 .map_io = mityomapl138_map_io,
630 .init_irq = da850_init_irq,
631 .init_time = da850_init_time,
632 .init_machine = mityomapl138_init,
633 .init_late = davinci_init_late,
634 .dma_zone_size = SZ_128M,