arch/arm/boot/dts/vfxxx.dtsi

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License
  11  *     version 2 as published by the Free Software Foundation.
  12  *
  13  *     This file is distributed in the hope that it will be useful,
  14  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  *     GNU General Public License for more details.
  17  *
  18  * Or, alternatively,
  19  *
  20  *  b) Permission is hereby granted, free of charge, to any person
  21  *     obtaining a copy of this software and associated documentation
  22  *     files (the "Software"), to deal in the Software without
  23  *     restriction, including without limitation the rights to use,
  24  *     copy, modify, merge, publish, distribute, sublicense, and/or
  25  *     sell copies of the Software, and to permit persons to whom the
  26  *     Software is furnished to do so, subject to the following
  27  *     conditions:
  28  *
  29  *     The above copyright notice and this permission notice shall be
  30  *     included in all copies or substantial portions of the Software.
  31  *
  32  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  33  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  34  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  35  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  36  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  37  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  38  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  39  *     OTHER DEALINGS IN THE SOFTWARE.
  40  */
  41
  42 #include "vf610-pinfunc.h"
  43 #include <dt-bindings/clock/vf610-clock.h>
  44 #include <dt-bindings/interrupt-controller/irq.h>
  45 #include <dt-bindings/gpio/gpio.h>
  46
  47 / {
  48         aliases {
  49                 can0 = &can0;
  50                 can1 = &can1;
  51                 ethernet0 = &fec0;
  52                 ethernet1 = &fec1;
  53                 serial0 = &uart0;
  54                 serial1 = &uart1;
  55                 serial2 = &uart2;
  56                 serial3 = &uart3;
  57                 serial4 = &uart4;
  58                 serial5 = &uart5;
  59                 gpio0 = &gpio0;
  60                 gpio1 = &gpio1;
  61                 gpio2 = &gpio2;
  62                 gpio3 = &gpio3;
  63                 gpio4 = &gpio4;
  64                 usbphy0 = &usbphy0;
  65                 usbphy1 = &usbphy1;
  66         };
  67
  68         fxosc: fxosc {
  69                 compatible = "fixed-clock";
  70                 #clock-cells = <0>;
  71                 clock-frequency = <24000000>;
  72         };
  73
  74         sxosc: sxosc {
  75                 compatible = "fixed-clock";
  76                 #clock-cells = <0>;
  77                 clock-frequency = <32768>;
  78         };
  79
  80         reboot: syscon-reboot {
  81                 compatible = "syscon-reboot";
  82                 regmap = <&src>;
  83                 offset = <0x0>;
  84                 mask = <0x1000>;
  85         };
  86
  87         tempsensor: iio-hwmon {
  88                 compatible = "iio-hwmon";
  89                 io-channels = <&adc0 16>, <&adc1 16>;
  90         };
  91
  92         soc {
  93                 #address-cells = <1>;
  94                 #size-cells = <1>;
  95                 compatible = "simple-bus";
  96                 interrupt-parent = <&mscm_ir>;
  97                 ranges;
  98
  99                 aips0: aips-bus@40000000 {
 100                         compatible = "fsl,aips-bus", "simple-bus";
 101                         #address-cells = <1>;
 102                         #size-cells = <1>;
 103                         reg = <0x40000000 0x00070000>;
 104                         ranges;
 105
 106                         mscm_cpucfg: cpucfg@40001000 {
 107                                 compatible = "fsl,vf610-mscm-cpucfg", "syscon";
 108                                 reg = <0x40001000 0x800>;
 109                         };
 110
 111                         mscm_ir: interrupt-controller@40001800 {
 112                                 compatible = "fsl,vf610-mscm-ir";
 113                                 reg = <0x40001800 0x400>;
 114                                 fsl,cpucfg = <&mscm_cpucfg>;
 115                                 interrupt-controller;
 116                                 #interrupt-cells = <2>;
 117                         };
 118
 119                         edma0: dma-controller@40018000 {
 120                                 #dma-cells = <2>;
 121                                 compatible = "fsl,vf610-edma";
 122                                 reg = <0x40018000 0x2000>,
 123                                         <0x40024000 0x1000>,
 124                                         <0x40025000 0x1000>;
 125                                 dma-channels = <32>;
 126                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
 127                                                 <9 IRQ_TYPE_LEVEL_HIGH>;
 128                                 interrupt-names = "edma-tx", "edma-err";
 129                                 clock-names = "dmamux0", "dmamux1";
 130                                 clocks = <&clks VF610_CLK_DMAMUX0>,
 131                                         <&clks VF610_CLK_DMAMUX1>;
 132                                 status = "disabled";
 133                         };
 134
 135                         can0: flexcan@40020000 {
 136                                 compatible = "fsl,vf610-flexcan";
 137                                 reg = <0x40020000 0x4000>;
 138                                 interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
 139                                 clocks = <&clks VF610_CLK_FLEXCAN0>,
 140                                          <&clks VF610_CLK_FLEXCAN0>;
 141                                 clock-names = "ipg", "per";
 142                                 status = "disabled";
 143                         };
 144
 145                         uart0: serial@40027000 {
 146                                 compatible = "fsl,vf610-lpuart";
 147                                 reg = <0x40027000 0x1000>;
 148                                 interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
 149                                 clocks = <&clks VF610_CLK_UART0>;
 150                                 clock-names = "ipg";
 151                                 dmas = <&edma0 0 2>,
 152                                         <&edma0 0 3>;
 153                                 dma-names = "rx","tx";
 154                                 status = "disabled";
 155                         };
 156
 157                         uart1: serial@40028000 {
 158                                 compatible = "fsl,vf610-lpuart";
 159                                 reg = <0x40028000 0x1000>;
 160                                 interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
 161                                 clocks = <&clks VF610_CLK_UART1>;
 162                                 clock-names = "ipg";
 163                                 dmas = <&edma0 0 4>,
 164                                         <&edma0 0 5>;
 165                                 dma-names = "rx","tx";
 166                                 status = "disabled";
 167                         };
 168
 169                         uart2: serial@40029000 {
 170                                 compatible = "fsl,vf610-lpuart";
 171                                 reg = <0x40029000 0x1000>;
 172                                 interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
 173                                 clocks = <&clks VF610_CLK_UART2>;
 174                                 clock-names = "ipg";
 175                                 dmas = <&edma0 0 6>,
 176                                         <&edma0 0 7>;
 177                                 dma-names = "rx","tx";
 178                                 status = "disabled";
 179                         };
 180
 181                         uart3: serial@4002a000 {
 182                                 compatible = "fsl,vf610-lpuart";
 183                                 reg = <0x4002a000 0x1000>;
 184                                 interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
 185                                 clocks = <&clks VF610_CLK_UART3>;
 186                                 clock-names = "ipg";
 187                                 dmas = <&edma0 0 8>,
 188                                         <&edma0 0 9>;
 189                                 dma-names = "rx","tx";
 190                                 status = "disabled";
 191                         };
 192
 193                         dspi0: dspi0@4002c000 {
 194                                 #address-cells = <1>;
 195                                 #size-cells = <0>;
 196                                 compatible = "fsl,vf610-dspi";
 197                                 reg = <0x4002c000 0x1000>;
 198                                 interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
 199                                 clocks = <&clks VF610_CLK_DSPI0>;
 200                                 clock-names = "dspi";
 201                                 spi-num-chipselects = <6>;
 202                                 dmas = <&edma1 1 12>,
 203                                         <&edma1 1 13>;
 204                                 dma-names = "rx", "tx";
 205                                 status = "disabled";
 206                         };
 207
 208                         dspi1: dspi1@4002d000 {
 209                                 #address-cells = <1>;
 210                                 #size-cells = <0>;
 211                                 compatible = "fsl,vf610-dspi";
 212                                 reg = <0x4002d000 0x1000>;
 213                                 interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
 214                                 clocks = <&clks VF610_CLK_DSPI1>;
 215                                 clock-names = "dspi";
 216                                 spi-num-chipselects = <4>;
 217                                 dmas = <&edma1 1 14>,
 218                                         <&edma1 1 15>;
 219                                 dma-names = "rx", "tx";
 220                                 status = "disabled";
 221                         };
 222
 223                         sai0: sai@4002f000 {
 224                                 compatible = "fsl,vf610-sai";
 225                                 reg = <0x4002f000 0x1000>;
 226                                 interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
 227                                 clocks = <&clks VF610_CLK_SAI0>,
 228                                         <&clks VF610_CLK_SAI0_DIV>,
 229                                         <&clks 0>, <&clks 0>;
 230                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 231                                 dma-names = "tx", "rx";
 232                                 dmas = <&edma0 0 17>,
 233                                         <&edma0 0 16>;
 234                                 status = "disabled";
 235                         };
 236
 237                         sai1: sai@40030000 {
 238                                 compatible = "fsl,vf610-sai";
 239                                 reg = <0x40030000 0x1000>;
 240                                 interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
 241                                 clocks = <&clks VF610_CLK_SAI1>,
 242                                         <&clks VF610_CLK_SAI1_DIV>,
 243                                         <&clks 0>, <&clks 0>;
 244                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 245                                 dma-names = "tx", "rx";
 246                                 dmas = <&edma0 0 19>,
 247                                         <&edma0 0 18>;
 248                                 status = "disabled";
 249                         };
 250
 251                         sai2: sai@40031000 {
 252                                 compatible = "fsl,vf610-sai";
 253                                 reg = <0x40031000 0x1000>;
 254                                 interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
 255                                 clocks = <&clks VF610_CLK_SAI2>,
 256                                         <&clks VF610_CLK_SAI2_DIV>,
 257                                         <&clks 0>, <&clks 0>;
 258                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 259                                 dma-names = "tx", "rx";
 260                                 dmas = <&edma0 0 21>,
 261                                         <&edma0 0 20>;
 262                                 status = "disabled";
 263                         };
 264
 265                         sai3: sai@40032000 {
 266                                 compatible = "fsl,vf610-sai";
 267                                 reg = <0x40032000 0x1000>;
 268                                 interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
 269                                 clocks = <&clks VF610_CLK_SAI3>,
 270                                         <&clks VF610_CLK_SAI3_DIV>,
 271                                         <&clks 0>, <&clks 0>;
 272                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 273                                 dma-names = "tx", "rx";
 274                                 dmas = <&edma0 1 9>,
 275                                         <&edma0 1 8>;
 276                                 status = "disabled";
 277                         };
 278
 279                         pit: pit@40037000 {
 280                                 compatible = "fsl,vf610-pit";
 281                                 reg = <0x40037000 0x1000>;
 282                                 interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 283                                 clocks = <&clks VF610_CLK_PIT>;
 284                                 clock-names = "pit";
 285                         };
 286
 287                         pwm0: pwm@40038000 {
 288                                 compatible = "fsl,vf610-ftm-pwm";
 289                                 #pwm-cells = <3>;
 290                                 reg = <0x40038000 0x1000>;
 291                                 clock-names = "ftm_sys", "ftm_ext",
 292                                               "ftm_fix", "ftm_cnt_clk_en";
 293                                 clocks = <&clks VF610_CLK_FTM0>,
 294                                         <&clks VF610_CLK_FTM0_EXT_SEL>,
 295                                         <&clks VF610_CLK_FTM0_FIX_SEL>,
 296                                         <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
 297                                 status = "disabled";
 298                         };
 299
 300                         pwm1: pwm@40039000 {
 301                                 compatible = "fsl,vf610-ftm-pwm";
 302                                 #pwm-cells = <3>;
 303                                 reg = <0x40039000 0x1000>;
 304                                 clock-names = "ftm_sys", "ftm_ext",
 305                                               "ftm_fix", "ftm_cnt_clk_en";
 306                                 clocks = <&clks VF610_CLK_FTM1>,
 307                                         <&clks VF610_CLK_FTM1_EXT_SEL>,
 308                                         <&clks VF610_CLK_FTM1_FIX_SEL>,
 309                                         <&clks VF610_CLK_FTM1_EXT_FIX_EN>;
 310                                 status = "disabled";
 311                         };
 312
 313                         adc0: adc@4003b000 {
 314                                 compatible = "fsl,vf610-adc";
 315                                 reg = <0x4003b000 0x1000>;
 316                                 interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
 317                                 clocks = <&clks VF610_CLK_ADC0>;
 318                                 clock-names = "adc";
 319                                 #io-channel-cells = <1>;
 320                                 status = "disabled";
 321                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 322                                                         <20000000>;
 323                         };
 324
 325                         tcon0: timing-controller@4003d000 {
 326                                 compatible = "fsl,vf610-tcon";
 327                                 reg = <0x4003d000 0x1000>;
 328                                 clocks = <&clks VF610_CLK_TCON0>;
 329                                 clock-names = "ipg";
 330                                 status = "disabled";
 331                         };
 332
 333                         wdoga5: wdog@4003e000 {
 334                                 compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 335                                 reg = <0x4003e000 0x1000>;
 336                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 337                                 clocks = <&clks VF610_CLK_WDT>;
 338                                 clock-names = "wdog";
 339                                 status = "disabled";
 340                         };
 341
 342                         qspi0: quadspi@40044000 {
 343                                 #address-cells = <1>;
 344                                 #size-cells = <0>;
 345                                 compatible = "fsl,vf610-qspi";
 346                                 reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
 347                                 reg-names = "QuadSPI", "QuadSPI-memory";
 348                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 349                                 clocks = <&clks VF610_CLK_QSPI0_EN>,
 350                                         <&clks VF610_CLK_QSPI0>;
 351                                 clock-names = "qspi_en", "qspi";
 352                                 status = "disabled";
 353                         };
 354
 355                         iomuxc: iomuxc@40048000 {
 356                                 compatible = "fsl,vf610-iomuxc";
 357                                 reg = <0x40048000 0x1000>;
 358                         };
 359
 360                         gpio0: gpio@40049000 {
 361                                 compatible = "fsl,vf610-gpio";
 362                                 reg = <0x40049000 0x1000 0x400ff000 0x40>;
 363                                 gpio-controller;
 364                                 #gpio-cells = <2>;
 365                                 interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 366                                 interrupt-controller;
 367                                 #interrupt-cells = <2>;
 368                                 gpio-ranges = <&iomuxc 0 0 32>;
 369                         };
 370
 371                         gpio1: gpio@4004a000 {
 372                                 compatible = "fsl,vf610-gpio";
 373                                 reg = <0x4004a000 0x1000 0x400ff040 0x40>;
 374                                 gpio-controller;
 375                                 #gpio-cells = <2>;
 376                                 interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
 377                                 interrupt-controller;
 378                                 #interrupt-cells = <2>;
 379                                 gpio-ranges = <&iomuxc 0 32 32>;
 380                         };
 381
 382                         gpio2: gpio@4004b000 {
 383                                 compatible = "fsl,vf610-gpio";
 384                                 reg = <0x4004b000 0x1000 0x400ff080 0x40>;
 385                                 gpio-controller;
 386                                 #gpio-cells = <2>;
 387                                 interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
 388                                 interrupt-controller;
 389                                 #interrupt-cells = <2>;
 390                                 gpio-ranges = <&iomuxc 0 64 32>;
 391                         };
 392
 393                         gpio3: gpio@4004c000 {
 394                                 compatible = "fsl,vf610-gpio";
 395                                 reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
 396                                 gpio-controller;
 397                                 #gpio-cells = <2>;
 398                                 interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
 399                                 interrupt-controller;
 400                                 #interrupt-cells = <2>;
 401                                 gpio-ranges = <&iomuxc 0 96 32>;
 402                         };
 403
 404                         gpio4: gpio@4004d000 {
 405                                 compatible = "fsl,vf610-gpio";
 406                                 reg = <0x4004d000 0x1000 0x400ff100 0x40>;
 407                                 gpio-controller;
 408                                 #gpio-cells = <2>;
 409                                 interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
 410                                 interrupt-controller;
 411                                 #interrupt-cells = <2>;
 412                                 gpio-ranges = <&iomuxc 0 128 7>;
 413                         };
 414
 415                         anatop: anatop@40050000 {
 416                                 compatible = "fsl,vf610-anatop", "syscon";
 417                                 reg = <0x40050000 0x400>;
 418                         };
 419
 420                         usbphy0: usbphy@40050800 {
 421                                 compatible = "fsl,vf610-usbphy";
 422                                 reg = <0x40050800 0x400>;
 423                                 interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
 424                                 clocks = <&clks VF610_CLK_USBPHY0>;
 425                                 fsl,anatop = <&anatop>;
 426                                 status = "disabled";
 427                         };
 428
 429                         usbphy1: usbphy@40050c00 {
 430                                 compatible = "fsl,vf610-usbphy";
 431                                 reg = <0x40050c00 0x400>;
 432                                 interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
 433                                 clocks = <&clks VF610_CLK_USBPHY1>;
 434                                 fsl,anatop = <&anatop>;
 435                                 status = "disabled";
 436                         };
 437
 438                         dcu0: dcu@40058000 {
 439                                 compatible = "fsl,vf610-dcu";
 440                                 reg = <0x40058000 0x1200>;
 441                                 interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
 442                                 clocks = <&clks VF610_CLK_DCU0>,
 443                                         <&clks VF610_CLK_DCU0_DIV>;
 444                                 clock-names = "dcu", "pix";
 445                                 fsl,tcon = <&tcon0>;
 446                                 status = "disabled";
 447                         };
 448
 449                         i2c0: i2c@40066000 {
 450                                 #address-cells = <1>;
 451                                 #size-cells = <0>;
 452                                 compatible = "fsl,vf610-i2c";
 453                                 reg = <0x40066000 0x1000>;
 454                                 interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
 455                                 clocks = <&clks VF610_CLK_I2C0>;
 456                                 clock-names = "ipg";
 457                                 dmas = <&edma0 0 50>,
 458                                         <&edma0 0 51>;
 459                                 dma-names = "rx","tx";
 460                                 status = "disabled";
 461                         };
 462
 463                         i2c1: i2c@40067000 {
 464                                 #address-cells = <1>;
 465                                 #size-cells = <0>;
 466                                 compatible = "fsl,vf610-i2c";
 467                                 reg = <0x40067000 0x1000>;
 468                                 interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
 469                                 clocks = <&clks VF610_CLK_I2C1>;
 470                                 clock-names = "ipg";
 471                                 dmas = <&edma0 0 52>,
 472                                         <&edma0 0 53>;
 473                                 dma-names = "rx","tx";
 474                                 status = "disabled";
 475                         };
 476
 477                         clks: ccm@4006b000 {
 478                                 compatible = "fsl,vf610-ccm";
 479                                 reg = <0x4006b000 0x1000>;
 480                                 clocks = <&sxosc>, <&fxosc>;
 481                                 clock-names = "sxosc", "fxosc";
 482                                 #clock-cells = <1>;
 483                         };
 484
 485                         usbdev0: usb@40034000 {
 486                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 487                                 reg = <0x40034000 0x800>;
 488                                 interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
 489                                 clocks = <&clks VF610_CLK_USBC0>;
 490                                 fsl,usbphy = <&usbphy0>;
 491                                 fsl,usbmisc = <&usbmisc0 0>;
 492                                 dr_mode = "peripheral";
 493                                 status = "disabled";
 494                         };
 495
 496                         usbmisc0: usb@40034800 {
 497                                 #index-cells = <1>;
 498                                 compatible = "fsl,vf610-usbmisc";
 499                                 reg = <0x40034800 0x200>;
 500                                 clocks = <&clks VF610_CLK_USBC0>;
 501                                 status = "disabled";
 502                         };
 503
 504                         src: src@4006e000 {
 505                                 compatible = "fsl,vf610-src", "syscon";
 506                                 reg = <0x4006e000 0x1000>;
 507                                 interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
 508                         };
 509                 };
 510
 511                 aips1: aips-bus@40080000 {
 512                         compatible = "fsl,aips-bus", "simple-bus";
 513                         #address-cells = <1>;
 514                         #size-cells = <1>;
 515                         reg = <0x40080000 0x0007f000>;
 516                         ranges;
 517
 518                         edma1: dma-controller@40098000 {
 519                                 #dma-cells = <2>;
 520                                 compatible = "fsl,vf610-edma";
 521                                 reg = <0x40098000 0x2000>,
 522                                         <0x400a1000 0x1000>,
 523                                         <0x400a2000 0x1000>;
 524                                 dma-channels = <32>;
 525                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
 526                                                 <11 IRQ_TYPE_LEVEL_HIGH>;
 527                                 interrupt-names = "edma-tx", "edma-err";
 528                                 clock-names = "dmamux0", "dmamux1";
 529                                 clocks = <&clks VF610_CLK_DMAMUX2>,
 530                                         <&clks VF610_CLK_DMAMUX3>;
 531                                 status = "disabled";
 532                         };
 533
 534                         ocotp: ocotp@400a5000 {
 535                                 compatible = "fsl,vf610-ocotp", "syscon";
 536                                 reg = <0x400a5000 0x1000>;
 537                                 clocks = <&clks VF610_CLK_OCOTP>;
 538                         };
 539
 540                         snvs0: snvs@400a7000 {
 541                             compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 542                                 reg = <0x400a7000 0x2000>;
 543
 544                                 snvsrtc: snvs-rtc-lp {
 545                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 546                                         regmap = <&snvs0>;
 547                                         offset = <0x34>;
 548                                         interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 549                                         clocks = <&clks VF610_CLK_SNVS>;
 550                                         clock-names = "snvs-rtc";
 551                                 };
 552                         };
 553
 554                         uart4: serial@400a9000 {
 555                                 compatible = "fsl,vf610-lpuart";
 556                                 reg = <0x400a9000 0x1000>;
 557                                 interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
 558                                 clocks = <&clks VF610_CLK_UART4>;
 559                                 clock-names = "ipg";
 560                                 status = "disabled";
 561                         };
 562
 563                         uart5: serial@400aa000 {
 564                                 compatible = "fsl,vf610-lpuart";
 565                                 reg = <0x400aa000 0x1000>;
 566                                 interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
 567                                 clocks = <&clks VF610_CLK_UART5>;
 568                                 clock-names = "ipg";
 569                                 status = "disabled";
 570                         };
 571
 572                         dspi2: dspi2@400ac000 {
 573                                 #address-cells = <1>;
 574                                 #size-cells = <0>;
 575                                 compatible = "fsl,vf610-dspi";
 576                                 reg = <0x400ac000 0x1000>;
 577                                 interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
 578                                 clocks = <&clks VF610_CLK_DSPI2>;
 579                                 clock-names = "dspi";
 580                                 spi-num-chipselects = <2>;
 581                                 dmas = <&edma1 0 10>,
 582                                         <&edma1 0 11>;
 583                                 dma-names = "rx", "tx";
 584                                 status = "disabled";
 585                         };
 586
 587                         dspi3: dspi3@400ad000 {
 588                                 #address-cells = <1>;
 589                                 #size-cells = <0>;
 590                                 compatible = "fsl,vf610-dspi";
 591                                 reg = <0x400ad000 0x1000>;
 592                                 interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
 593                                 clocks = <&clks VF610_CLK_DSPI3>;
 594                                 clock-names = "dspi";
 595                                 spi-num-chipselects = <2>;
 596                                 dmas = <&edma1 0 12>,
 597                                         <&edma1 0 13>;
 598                                 dma-names = "rx", "tx";
 599                                 status = "disabled";
 600                         };
 601
 602                         adc1: adc@400bb000 {
 603                                 compatible = "fsl,vf610-adc";
 604                                 reg = <0x400bb000 0x1000>;
 605                                 interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 606                                 clocks = <&clks VF610_CLK_ADC1>;
 607                                 clock-names = "adc";
 608                                 #io-channel-cells = <1>;
 609                                 status = "disabled";
 610                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 611                                                         <20000000>;
 612                         };
 613
 614                         esdhc0: esdhc@400b1000 {
 615                                 compatible = "fsl,imx53-esdhc";
 616                                 reg = <0x400b1000 0x1000>;
 617                                 interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 618                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 619                                         <&clks VF610_CLK_PLATFORM_BUS>,
 620                                         <&clks VF610_CLK_ESDHC0>;
 621                                 clock-names = "ipg", "ahb", "per";
 622                                 status = "disabled";
 623                         };
 624
 625                         esdhc1: esdhc@400b2000 {
 626                                 compatible = "fsl,imx53-esdhc";
 627                                 reg = <0x400b2000 0x1000>;
 628                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 629                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 630                                         <&clks VF610_CLK_PLATFORM_BUS>,
 631                                         <&clks VF610_CLK_ESDHC1>;
 632                                 clock-names = "ipg", "ahb", "per";
 633                                 status = "disabled";
 634                         };
 635
 636                         usbh1: usb@400b4000 {
 637                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 638                                 reg = <0x400b4000 0x800>;
 639                                 interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
 640                                 clocks = <&clks VF610_CLK_USBC1>;
 641                                 fsl,usbphy = <&usbphy1>;
 642                                 fsl,usbmisc = <&usbmisc1 0>;
 643                                 dr_mode = "host";
 644                                 status = "disabled";
 645                         };
 646
 647                         usbmisc1: usb@400b4800 {
 648                                 #index-cells = <1>;
 649                                 compatible = "fsl,vf610-usbmisc";
 650                                 reg = <0x400b4800 0x200>;
 651                                 clocks = <&clks VF610_CLK_USBC1>;
 652                                 status = "disabled";
 653                         };
 654
 655                         ftm: ftm@400b8000 {
 656                                 compatible = "fsl,ftm-timer";
 657                                 reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
 658                                 interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 659                                 clock-names = "ftm-evt", "ftm-src",
 660                                         "ftm-evt-counter-en", "ftm-src-counter-en";
 661                                 clocks = <&clks VF610_CLK_FTM2>,
 662                                         <&clks VF610_CLK_FTM3>,
 663                                         <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
 664                                         <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
 665                                 status = "disabled";
 666                         };
 667
 668                         qspi1: quadspi@400c4000 {
 669                                 #address-cells = <1>;
 670                                 #size-cells = <0>;
 671                                 compatible = "fsl,vf610-qspi";
 672                                 reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
 673                                 reg-names = "QuadSPI", "QuadSPI-memory";
 674                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 675                                 clocks = <&clks VF610_CLK_QSPI1_EN>,
 676                                         <&clks VF610_CLK_QSPI1>;
 677                                 clock-names = "qspi_en", "qspi";
 678                                 status = "disabled";
 679                         };
 680
 681                         dac0: dac@400cc000 {
 682                                 compatible = "fsl,vf610-dac";
 683                                 reg = <0x400cc000 1000>;
 684                                 interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
 685                                 clock-names = "dac";
 686                                 clocks = <&clks VF610_CLK_DAC0>;
 687                                 status = "disabled";
 688                         };
 689
 690                         dac1: dac@400cd000 {
 691                                 compatible = "fsl,vf610-dac";
 692                                 reg = <0x400cd000 1000>;
 693                                 interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
 694                                 clock-names = "dac";
 695                                 clocks = <&clks VF610_CLK_DAC1>;
 696                                 status = "disabled";
 697                         };
 698
 699                         fec0: ethernet@400d0000 {
 700                                 compatible = "fsl,mvf600-fec";
 701                                 reg = <0x400d0000 0x1000>;
 702                                 interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
 703                                 clocks = <&clks VF610_CLK_ENET0>,
 704                                         <&clks VF610_CLK_ENET0>,
 705                                         <&clks VF610_CLK_ENET>;
 706                                 clock-names = "ipg", "ahb", "ptp";
 707                                 status = "disabled";
 708                         };
 709
 710                         fec1: ethernet@400d1000 {
 711                                 compatible = "fsl,mvf600-fec";
 712                                 reg = <0x400d1000 0x1000>;
 713                                 interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
 714                                 clocks = <&clks VF610_CLK_ENET1>,
 715                                         <&clks VF610_CLK_ENET1>,
 716                                         <&clks VF610_CLK_ENET>;
 717                                 clock-names = "ipg", "ahb", "ptp";
 718                                 status = "disabled";
 719                         };
 720
 721                         can1: flexcan@400d4000 {
 722                                 compatible = "fsl,vf610-flexcan";
 723                                 reg = <0x400d4000 0x4000>;
 724                                 interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
 725                                 clocks = <&clks VF610_CLK_FLEXCAN1>,
 726                                          <&clks VF610_CLK_FLEXCAN1>;
 727                                 clock-names = "ipg", "per";
 728                                 status = "disabled";
 729                         };
 730
 731                         nfc: nand@400e0000 {
 732                                 #address-cells = <1>;
 733                                 #size-cells = <0>;
 734                                 compatible = "fsl,vf610-nfc";
 735                                 reg = <0x400e0000 0x4000>;
 736                                 interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
 737                                 clocks = <&clks VF610_CLK_NFC>;
 738                                 clock-names = "nfc";
 739                                 status = "disabled";
 740                         };
 741
 742                         i2c2: i2c@400e6000 {
 743                                 #address-cells = <1>;
 744                                 #size-cells = <0>;
 745                                 compatible = "fsl,vf610-i2c";
 746                                 reg = <0x400e6000 0x1000>;
 747                                 interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
 748                                 clocks = <&clks VF610_CLK_I2C2>;
 749                                 clock-names = "ipg";
 750                                 dmas = <&edma0 1 36>,
 751                                         <&edma0 1 37>;
 752                                 dma-names = "rx","tx";
 753                                 status = "disabled";
 754                         };
 755
 756                         i2c3: i2c@400e7000 {
 757                                 #address-cells = <1>;
 758                                 #size-cells = <0>;
 759                                 compatible = "fsl,vf610-i2c";
 760                                 reg = <0x400e7000 0x1000>;
 761                                 interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
 762                                 clocks = <&clks VF610_CLK_I2C3>;
 763                                 clock-names = "ipg";
 764                                 dmas = <&edma0 1 38>,
 765                                         <&edma0 1 39>;
 766                                 dma-names = "rx","tx";
 767                                 status = "disabled";
 768                         };
 769                 };
 770         };
 771 };