arch/arm/boot/dts/tegra30-cardhu.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include <dt-bindings/input/input.h>
   3 #include "tegra30.dtsi"
   4
   5 /**
   6  * This file contains common DT entry for all fab version of Cardhu.
   7  * There is multiple fab version of Cardhu starting from A01 to A07.
   8  * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
   9  * A02 will have different sets of GPIOs for fixed regulator compare to
  10  * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
  11  * compatible with fab version A04. Based on Cardhu fab version, the
  12  * related dts file need to be chosen like for Cardhu fab version A02,
  13  * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
  14  * tegra30-cardhu-a04.dts.
  15  * The identification of board is done in two ways, by looking the sticker
  16  * on PCB and by reading board id eeprom.
  17  * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
  18  * number is the fab version like here it is 002 and hence fab version A02.
  19  * The (downstream internal) U-Boot of Cardhu display the board-id as
  20  * follows:
  21  * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
  22  * In this Fab version is 02 i.e. A02.
  23  * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
  24  * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
  25  * wide.
  26  */
  27
  28 / {
  29         model = "NVIDIA Tegra30 Cardhu evaluation board";
  30         compatible = "nvidia,cardhu", "nvidia,tegra30";
  31
  32         aliases {
  33                 rtc0 = "/i2c@7000d000/tps65911@2d";
  34                 rtc1 = "/rtc@7000e000";
  35                 serial0 = &uarta;
  36                 serial1 = &uartc;
  37         };
  38
  39         chosen {
  40                 stdout-path = "serial0:115200n8";
  41         };
  42
  43         memory@80000000 {
  44                 reg = <0x80000000 0x40000000>;
  45         };
  46
  47         pcie@3000 {
  48                 status = "okay";
  49
  50                 /* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
  51                 avdd-pexb-supply = <&ldo1_reg>;
  52                 vdd-pexb-supply = <&ldo1_reg>;
  53                 avdd-pex-pll-supply = <&ldo1_reg>;
  54                 hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
  55                 vddio-pex-ctl-supply = <&sys_3v3_reg>;
  56                 avdd-plle-supply = <&ldo2_reg>;
  57
  58                 pci@1,0 {
  59                         nvidia,num-lanes = <4>;
  60                 };
  61
  62                 pci@2,0 {
  63                         nvidia,num-lanes = <1>;
  64                 };
  65
  66                 pci@3,0 {
  67                         status = "okay";
  68                         nvidia,num-lanes = <1>;
  69                 };
  70         };
  71
  72         host1x@50000000 {
  73                 dc@54200000 {
  74                         rgb {
  75                                 status = "okay";
  76
  77                                 nvidia,panel = <&panel>;
  78                         };
  79                 };
  80         };
  81
  82         pinmux@70000868 {
  83                 pinctrl-names = "default";
  84                 pinctrl-0 = <&state_default>;
  85
  86                 state_default: pinmux {
  87                         sdmmc1_clk_pz0 {
  88                                 nvidia,pins = "sdmmc1_clk_pz0";
  89                                 nvidia,function = "sdmmc1";
  90                                 nvidia,pull = <TEGRA_PIN_PULL_NONE>;
  91                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
  92                         };
  93                         sdmmc1_cmd_pz1 {
  94                                 nvidia,pins =   "sdmmc1_cmd_pz1",
  95                                                 "sdmmc1_dat0_py7",
  96                                                 "sdmmc1_dat1_py6",
  97                                                 "sdmmc1_dat2_py5",
  98                                                 "sdmmc1_dat3_py4";
  99                                 nvidia,function = "sdmmc1";
 100                                 nvidia,pull = <TEGRA_PIN_PULL_UP>;
 101                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 102                         };
 103                         sdmmc3_clk_pa6 {
 104                                 nvidia,pins = "sdmmc3_clk_pa6";
 105                                 nvidia,function = "sdmmc3";
 106                                 nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 107                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 108                         };
 109                         sdmmc3_cmd_pa7 {
 110                                 nvidia,pins =   "sdmmc3_cmd_pa7",
 111                                                 "sdmmc3_dat0_pb7",
 112                                                 "sdmmc3_dat1_pb6",
 113                                                 "sdmmc3_dat2_pb5",
 114                                                 "sdmmc3_dat3_pb4";
 115                                 nvidia,function = "sdmmc3";
 116                                 nvidia,pull = <TEGRA_PIN_PULL_UP>;
 117                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 118                         };
 119                         sdmmc4_clk_pcc4 {
 120                                 nvidia,pins =   "sdmmc4_clk_pcc4",
 121                                                 "sdmmc4_rst_n_pcc3";
 122                                 nvidia,function = "sdmmc4";
 123                                 nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 124                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 125                         };
 126                         sdmmc4_dat0_paa0 {
 127                                 nvidia,pins =   "sdmmc4_dat0_paa0",
 128                                                 "sdmmc4_dat1_paa1",
 129                                                 "sdmmc4_dat2_paa2",
 130                                                 "sdmmc4_dat3_paa3",
 131                                                 "sdmmc4_dat4_paa4",
 132                                                 "sdmmc4_dat5_paa5",
 133                                                 "sdmmc4_dat6_paa6",
 134                                                 "sdmmc4_dat7_paa7";
 135                                 nvidia,function = "sdmmc4";
 136                                 nvidia,pull = <TEGRA_PIN_PULL_UP>;
 137                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 138                         };
 139                         dap2_fs_pa2 {
 140                                 nvidia,pins =   "dap2_fs_pa2",
 141                                                 "dap2_sclk_pa3",
 142                                                 "dap2_din_pa4",
 143                                                 "dap2_dout_pa5";
 144                                 nvidia,function = "i2s1";
 145                                 nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 146                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 147                         };
 148                         sdio3 {
 149                                 nvidia,pins = "drive_sdio3";
 150                                 nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
 151                                 nvidia,schmitt = <TEGRA_PIN_DISABLE>;
 152                                 nvidia,pull-down-strength = <46>;
 153                                 nvidia,pull-up-strength = <42>;
 154                                 nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
 155                                 nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
 156                         };
 157                         uart3_txd_pw6 {
 158                                 nvidia,pins =   "uart3_txd_pw6",
 159                                                 "uart3_cts_n_pa1",
 160                                                 "uart3_rts_n_pc0",
 161                                                 "uart3_rxd_pw7";
 162                                 nvidia,function = "uartc";
 163                                 nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 164                                 nvidia,tristate = <TEGRA_PIN_DISABLE>;
 165                         };
 166                 };
 167         };
 168
 169         serial@70006000 {
 170                 status = "okay";
 171         };
 172
 173         serial@70006200 {
 174                 compatible = "nvidia,tegra30-hsuart";
 175                 status = "okay";
 176         };
 177
 178         pwm@7000a000 {
 179                 status = "okay";
 180         };
 181
 182         panelddc: i2c@7000c000 {
 183                 status = "okay";
 184                 clock-frequency = <100000>;
 185         };
 186
 187         i2c@7000c400 {
 188                 status = "okay";
 189                 clock-frequency = <100000>;
 190         };
 191
 192         i2c@7000c500 {
 193                 status = "okay";
 194                 clock-frequency = <100000>;
 195
 196                 /* ALS and Proximity sensor */
 197                 isl29028@44 {
 198                         compatible = "isil,isl29028";
 199                         reg = <0x44>;
 200                         interrupt-parent = <&gpio>;
 201                         interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
 202                 };
 203
 204                 i2cmux@70 {
 205                         compatible = "nxp,pca9546";
 206                         #address-cells = <1>;
 207                         #size-cells = <0>;
 208                         reg = <0x70>;
 209                         reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
 210                 };
 211         };
 212
 213         i2c@7000c700 {
 214                 status = "okay";
 215                 clock-frequency = <100000>;
 216         };
 217
 218         i2c@7000d000 {
 219                 status = "okay";
 220                 clock-frequency = <100000>;
 221
 222                 wm8903: wm8903@1a {
 223                         compatible = "wlf,wm8903";
 224                         reg = <0x1a>;
 225                         interrupt-parent = <&gpio>;
 226                         interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 227
 228                         gpio-controller;
 229                         #gpio-cells = <2>;
 230
 231                         micdet-cfg = <0>;
 232                         micdet-delay = <100>;
 233                         gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
 234                 };
 235
 236                 pmic: tps65911@2d {
 237                         compatible = "ti,tps65911";
 238                         reg = <0x2d>;
 239
 240                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 241                         #interrupt-cells = <2>;
 242                         interrupt-controller;
 243
 244                         ti,system-power-controller;
 245
 246                         #gpio-cells = <2>;
 247                         gpio-controller;
 248
 249                         vcc1-supply = <&vdd_ac_bat_reg>;
 250                         vcc2-supply = <&vdd_ac_bat_reg>;
 251                         vcc3-supply = <&vio_reg>;
 252                         vcc4-supply = <&vdd_5v0_reg>;
 253                         vcc5-supply = <&vdd_ac_bat_reg>;
 254                         vcc6-supply = <&vdd2_reg>;
 255                         vcc7-supply = <&vdd_ac_bat_reg>;
 256                         vccio-supply = <&vdd_ac_bat_reg>;
 257
 258                         regulators {
 259                                 vdd1_reg: vdd1 {
 260                                         regulator-name = "vddio_ddr_1v2";
 261                                         regulator-min-microvolt = <1200000>;
 262                                         regulator-max-microvolt = <1200000>;
 263                                         regulator-always-on;
 264                                 };
 265
 266                                 vdd2_reg: vdd2 {
 267                                         regulator-name = "vdd_1v5_gen";
 268                                         regulator-min-microvolt = <1500000>;
 269                                         regulator-max-microvolt = <1500000>;
 270                                         regulator-always-on;
 271                                 };
 272
 273                                 vddctrl_reg: vddctrl {
 274                                         regulator-name = "vdd_cpu,vdd_sys";
 275                                         regulator-min-microvolt = <1000000>;
 276                                         regulator-max-microvolt = <1000000>;
 277                                         regulator-always-on;
 278                                 };
 279
 280                                 vio_reg: vio {
 281                                         regulator-name = "vdd_1v8_gen";
 282                                         regulator-min-microvolt = <1800000>;
 283                                         regulator-max-microvolt = <1800000>;
 284                                         regulator-always-on;
 285                                 };
 286
 287                                 ldo1_reg: ldo1 {
 288                                         regulator-name = "vdd_pexa,vdd_pexb";
 289                                         regulator-min-microvolt = <1050000>;
 290                                         regulator-max-microvolt = <1050000>;
 291                                 };
 292
 293                                 ldo2_reg: ldo2 {
 294                                         regulator-name = "vdd_sata,avdd_plle";
 295                                         regulator-min-microvolt = <1050000>;
 296                                         regulator-max-microvolt = <1050000>;
 297                                 };
 298
 299                                 /* LDO3 is not connected to anything */
 300
 301                                 ldo4_reg: ldo4 {
 302                                         regulator-name = "vdd_rtc";
 303                                         regulator-min-microvolt = <1200000>;
 304                                         regulator-max-microvolt = <1200000>;
 305                                         regulator-always-on;
 306                                 };
 307
 308                                 ldo5_reg: ldo5 {
 309                                         regulator-name = "vddio_sdmmc,avdd_vdac";
 310                                         regulator-min-microvolt = <3300000>;
 311                                         regulator-max-microvolt = <3300000>;
 312                                         regulator-always-on;
 313                                 };
 314
 315                                 ldo6_reg: ldo6 {
 316                                         regulator-name = "avdd_dsi_csi,pwrdet_mipi";
 317                                         regulator-min-microvolt = <1200000>;
 318                                         regulator-max-microvolt = <1200000>;
 319                                 };
 320
 321                                 ldo7_reg: ldo7 {
 322                                         regulator-name = "vdd_pllm,x,u,a_p_c_s";
 323                                         regulator-min-microvolt = <1200000>;
 324                                         regulator-max-microvolt = <1200000>;
 325                                         regulator-always-on;
 326                                 };
 327
 328                                 ldo8_reg: ldo8 {
 329                                         regulator-name = "vdd_ddr_hs";
 330                                         regulator-min-microvolt = <1000000>;
 331                                         regulator-max-microvolt = <1000000>;
 332                                         regulator-always-on;
 333                                 };
 334                         };
 335                 };
 336
 337                 temperature-sensor@4c {
 338                         compatible = "onnn,nct1008";
 339                         reg = <0x4c>;
 340                         vcc-supply = <&sys_3v3_reg>;
 341                         interrupt-parent = <&gpio>;
 342                         interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
 343                 };
 344
 345                 tps62361@60 {
 346                         compatible = "ti,tps62361";
 347                         reg = <0x60>;
 348
 349                         regulator-name = "tps62361-vout";
 350                         regulator-min-microvolt = <500000>;
 351                         regulator-max-microvolt = <1500000>;
 352                         regulator-boot-on;
 353                         regulator-always-on;
 354                         ti,vsel0-state-high;
 355                         ti,vsel1-state-high;
 356                 };
 357         };
 358
 359         spi@7000da00 {
 360                 status = "okay";
 361                 spi-max-frequency = <25000000>;
 362                 spi-flash@1 {
 363                         compatible = "winbond,w25q32";
 364                         reg = <1>;
 365                         spi-max-frequency = <20000000>;
 366                 };
 367         };
 368
 369         pmc@7000e400 {
 370                 status = "okay";
 371                 nvidia,invert-interrupt;
 372                 nvidia,suspend-mode = <1>;
 373                 nvidia,cpu-pwr-good-time = <2000>;
 374                 nvidia,cpu-pwr-off-time = <200>;
 375                 nvidia,core-pwr-good-time = <3845 3845>;
 376                 nvidia,core-pwr-off-time = <0>;
 377                 nvidia,core-power-req-active-high;
 378                 nvidia,sys-clock-req-active-high;
 379         };
 380
 381         ahub@70080000 {
 382                 i2s@70080400 {
 383                         status = "okay";
 384                 };
 385         };
 386
 387         sdhci@78000000 {
 388                 status = "okay";
 389                 cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 390                 wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
 391                 power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
 392                 bus-width = <4>;
 393         };
 394
 395         sdhci@78000600 {
 396                 status = "okay";
 397                 bus-width = <8>;
 398                 non-removable;
 399         };
 400
 401         usb@7d008000 {
 402                 status = "okay";
 403         };
 404
 405         usb-phy@7d008000 {
 406                 vbus-supply = <&usb3_vbus_reg>;
 407                 status = "okay";
 408         };
 409
 410         backlight: backlight {
 411                 compatible = "pwm-backlight";
 412
 413                 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 414                 power-supply = <&vdd_bl_reg>;
 415                 pwms = <&pwm 0 5000000>;
 416
 417                 brightness-levels = <0 4 8 16 32 64 128 255>;
 418                 default-brightness-level = <6>;
 419         };
 420
 421         clocks {
 422                 compatible = "simple-bus";
 423                 #address-cells = <1>;
 424                 #size-cells = <0>;
 425
 426                 clk32k_in: clock@0 {
 427                         compatible = "fixed-clock";
 428                         reg = <0>;
 429                         #clock-cells = <0>;
 430                         clock-frequency = <32768>;
 431                 };
 432         };
 433
 434         panel: panel {
 435                 compatible = "chunghwa,claa101wb01", "simple-panel";
 436                 ddc-i2c-bus = <&panelddc>;
 437
 438                 power-supply = <&vdd_pnl1_reg>;
 439                 enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
 440
 441                 backlight = <&backlight>;
 442         };
 443
 444         regulators {
 445                 compatible = "simple-bus";
 446                 #address-cells = <1>;
 447                 #size-cells = <0>;
 448
 449                 vdd_ac_bat_reg: regulator@0 {
 450                         compatible = "regulator-fixed";
 451                         reg = <0>;
 452                         regulator-name = "vdd_ac_bat";
 453                         regulator-min-microvolt = <5000000>;
 454                         regulator-max-microvolt = <5000000>;
 455                         regulator-always-on;
 456                 };
 457
 458                 cam_1v8_reg: regulator@1 {
 459                         compatible = "regulator-fixed";
 460                         reg = <1>;
 461                         regulator-name = "cam_1v8";
 462                         regulator-min-microvolt = <1800000>;
 463                         regulator-max-microvolt = <1800000>;
 464                         enable-active-high;
 465                         gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
 466                         vin-supply = <&vio_reg>;
 467                 };
 468
 469                 cp_5v_reg: regulator@2 {
 470                         compatible = "regulator-fixed";
 471                         reg = <2>;
 472                         regulator-name = "cp_5v";
 473                         regulator-min-microvolt = <5000000>;
 474                         regulator-max-microvolt = <5000000>;
 475                         regulator-boot-on;
 476                         regulator-always-on;
 477                         enable-active-high;
 478                         gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 479                 };
 480
 481                 emmc_3v3_reg: regulator@3 {
 482                         compatible = "regulator-fixed";
 483                         reg = <3>;
 484                         regulator-name = "emmc_3v3";
 485                         regulator-min-microvolt = <3300000>;
 486                         regulator-max-microvolt = <3300000>;
 487                         regulator-always-on;
 488                         regulator-boot-on;
 489                         enable-active-high;
 490                         gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
 491                         vin-supply = <&sys_3v3_reg>;
 492                 };
 493
 494                 modem_3v3_reg: regulator@4 {
 495                         compatible = "regulator-fixed";
 496                         reg = <4>;
 497                         regulator-name = "modem_3v3";
 498                         regulator-min-microvolt = <3300000>;
 499                         regulator-max-microvolt = <3300000>;
 500                         enable-active-high;
 501                         gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
 502                 };
 503
 504                 pex_hvdd_3v3_reg: regulator@5 {
 505                         compatible = "regulator-fixed";
 506                         reg = <5>;
 507                         regulator-name = "pex_hvdd_3v3";
 508                         regulator-min-microvolt = <3300000>;
 509                         regulator-max-microvolt = <3300000>;
 510                         enable-active-high;
 511                         gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
 512                         vin-supply = <&sys_3v3_reg>;
 513                 };
 514
 515                 vdd_cam1_ldo_reg: regulator@6 {
 516                         compatible = "regulator-fixed";
 517                         reg = <6>;
 518                         regulator-name = "vdd_cam1_ldo";
 519                         regulator-min-microvolt = <2800000>;
 520                         regulator-max-microvolt = <2800000>;
 521                         enable-active-high;
 522                         gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
 523                         vin-supply = <&sys_3v3_reg>;
 524                 };
 525
 526                 vdd_cam2_ldo_reg: regulator@7 {
 527                         compatible = "regulator-fixed";
 528                         reg = <7>;
 529                         regulator-name = "vdd_cam2_ldo";
 530                         regulator-min-microvolt = <2800000>;
 531                         regulator-max-microvolt = <2800000>;
 532                         enable-active-high;
 533                         gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 534                         vin-supply = <&sys_3v3_reg>;
 535                 };
 536
 537                 vdd_cam3_ldo_reg: regulator@8 {
 538                         compatible = "regulator-fixed";
 539                         reg = <8>;
 540                         regulator-name = "vdd_cam3_ldo";
 541                         regulator-min-microvolt = <3300000>;
 542                         regulator-max-microvolt = <3300000>;
 543                         enable-active-high;
 544                         gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
 545                         vin-supply = <&sys_3v3_reg>;
 546                 };
 547
 548                 vdd_com_reg: regulator@9 {
 549                         compatible = "regulator-fixed";
 550                         reg = <9>;
 551                         regulator-name = "vdd_com";
 552                         regulator-min-microvolt = <3300000>;
 553                         regulator-max-microvolt = <3300000>;
 554                         regulator-always-on;
 555                         regulator-boot-on;
 556                         enable-active-high;
 557                         gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
 558                         vin-supply = <&sys_3v3_reg>;
 559                 };
 560
 561                 vdd_fuse_3v3_reg: regulator@10 {
 562                         compatible = "regulator-fixed";
 563                         reg = <10>;
 564                         regulator-name = "vdd_fuse_3v3";
 565                         regulator-min-microvolt = <3300000>;
 566                         regulator-max-microvolt = <3300000>;
 567                         enable-active-high;
 568                         gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
 569                         vin-supply = <&sys_3v3_reg>;
 570                 };
 571
 572                 vdd_pnl1_reg: regulator@11 {
 573                         compatible = "regulator-fixed";
 574                         reg = <11>;
 575                         regulator-name = "vdd_pnl1";
 576                         regulator-min-microvolt = <3300000>;
 577                         regulator-max-microvolt = <3300000>;
 578                         regulator-always-on;
 579                         regulator-boot-on;
 580                         enable-active-high;
 581                         gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
 582                         vin-supply = <&sys_3v3_reg>;
 583                 };
 584
 585                 vdd_vid_reg: regulator@12 {
 586                         compatible = "regulator-fixed";
 587                         reg = <12>;
 588                         regulator-name = "vddio_vid";
 589                         regulator-min-microvolt = <5000000>;
 590                         regulator-max-microvolt = <5000000>;
 591                         enable-active-high;
 592                         gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
 593                         gpio-open-drain;
 594                         vin-supply = <&vdd_5v0_reg>;
 595                 };
 596         };
 597
 598         sound {
 599                 compatible = "nvidia,tegra-audio-wm8903-cardhu",
 600                              "nvidia,tegra-audio-wm8903";
 601                 nvidia,model = "NVIDIA Tegra Cardhu";
 602
 603                 nvidia,audio-routing =
 604                         "Headphone Jack", "HPOUTR",
 605                         "Headphone Jack", "HPOUTL",
 606                         "Int Spk", "ROP",
 607                         "Int Spk", "RON",
 608                         "Int Spk", "LOP",
 609                         "Int Spk", "LON",
 610                         "Mic Jack", "MICBIAS",
 611                         "IN1L", "Mic Jack";
 612
 613                 nvidia,i2s-controller = <&tegra_i2s1>;
 614                 nvidia,audio-codec = <&wm8903>;
 615
 616                 nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 617                 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
 618                         GPIO_ACTIVE_HIGH>;
 619
 620                 clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 621                          <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
 622                          <&tegra_car TEGRA30_CLK_EXTERN1>;
 623                 clock-names = "pll_a", "pll_a_out0", "mclk";
 624         };
 625
 626         gpio-keys {
 627                 compatible = "gpio-keys";
 628
 629                 power {
 630                         label = "Power";
 631                         interrupt-parent = <&pmic>;
 632                         interrupts = <2 0>;
 633                         linux,code = <KEY_POWER>;
 634                         debounce-interval = <100>;
 635                         wakeup-source;
 636                 };
 637
 638                 volume-down {
 639                         label = "Volume Down";
 640                         gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
 641                         linux,code = <KEY_VOLUMEDOWN>;
 642                         debounce-interval = <10>;
 643                 };
 644
 645                 volume-up {
 646                         label = "Volume Up";
 647                         gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
 648                         linux,code = <KEY_VOLUMEUP>;
 649                         debounce-interval = <10>;
 650                 };
 651         };
 652 };