2 * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
44 #include "sun8i-h3.dtsi"
45 #include "sunxi-common-regulators.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/input/input.h>
52 compatible = "roofull,beelink-x2", "allwinner,sun8i-h3";
57 ethernet1 = &sdiowifi;
61 compatible = "cec-gpio";
62 cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
63 hdmi-phandle = <&hdmi>;
67 stdout-path = "serial0:115200n8";
71 compatible = "hdmi-connector";
75 hdmi_con_in: endpoint {
76 remote-endpoint = <&hdmi_out_con>;
82 compatible = "gpio-leds";
85 label = "beelink-x2:blue:pwr";
86 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
91 label = "beelink-x2:red:standby";
92 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
97 compatible = "gpio-keys";
101 linux,code = <KEY_POWER>;
102 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
108 compatible = "simple-audio-card";
109 simple-audio-card,name = "On-board SPDIF";
111 simple-audio-card,cpu {
112 sound-dai = <&spdif>;
115 simple-audio-card,codec {
116 sound-dai = <&spdif_out>;
120 spdif_out: spdif-out {
121 #sound-dai-cells = <0>;
122 compatible = "linux,spdif-dit";
125 wifi_pwrseq: wifi_pwrseq {
126 compatible = "mmc-pwrseq-simple";
127 reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
128 clocks = <&rtc CLK_OSC32K_FANOUT>;
129 clock-names = "ext_clock";
146 phy-handle = <&int_mii_phy>;
148 allwinner,leds-active-low;
157 hdmi_out_con: endpoint {
158 remote-endpoint = <&hdmi_con_in>;
163 linux,rc-map-name = "rc-tanix-tx3mini";
164 pinctrl-names = "default";
165 pinctrl-0 = <&r_ir_rx_pin>;
170 vmmc-supply = <®_vcc3v3>;
172 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
177 vmmc-supply = <®_vcc3v3>;
178 vqmmc-supply = <®_vcc3v3>;
179 mmc-pwrseq = <&wifi_pwrseq>;
185 * Explicitly define the sdio device, so that we can add an ethernet
186 * alias for it (which e.g. makes u-boot set a mac-address).
188 sdiowifi: sdio_wifi@1 {
194 pinctrl-names = "default";
195 pinctrl-0 = <&mmc2_8bit_pins>;
196 vmmc-supply = <®_vcc3v3>;
212 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
217 pinctrl-names = "default";
218 pinctrl-0 = <&spdif_tx_pin>;
223 pinctrl-names = "default";
224 pinctrl-0 = <&uart0_pa_pins>;
234 /* USB VBUS is always on except for the OTG port */
236 usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
237 usb0_vbus-supply = <®_usb0_vbus>;