2 * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
44 #include "sun7i-a20.dtsi"
45 #include "sunxi-common-regulators.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/interrupt-controller/irq.h>
52 compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
61 stdout-path = "serial0:115200n8";
65 compatible = "hdmi-connector";
69 hdmi_con_in: endpoint {
70 remote-endpoint = <&hdmi_out_con>;
76 compatible = "gpio-leds";
77 pinctrl-names = "default";
78 pinctrl-0 = <&led_pins_lamobo_r1>;
81 label = "lamobo_r1:green:usr";
82 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
86 reg_gmac_3v3: gmac-3v3 {
87 compatible = "regulator-fixed";
88 pinctrl-names = "default";
89 pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
90 regulator-name = "gmac-3v3";
91 regulator-min-microvolt = <3300000>;
92 regulator-max-microvolt = <3300000>;
93 startup-delay-us = <100000>;
95 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
100 target-supply = <®_ahci_5v>;
109 cpu-supply = <®_dcdc2>;
125 pinctrl-names = "default";
126 pinctrl-0 = <&gmac_pins_rgmii_a>;
128 phy-supply = <®_gmac_3v3>;
137 compatible = "snps,dwmac-mdio";
138 #address-cells = <1>;
141 switch: ethernet-switch@1e {
142 compatible = "brcm,bcm53125";
144 #address-cells = <1>;
148 #address-cells = <1>;
180 phy-mode = "rgmii-txid";
196 hdmi_out_con: endpoint {
197 remote-endpoint = <&hdmi_con_in>;
202 pinctrl-names = "default";
203 pinctrl-0 = <&i2c0_pins_a>;
208 interrupt-parent = <&nmi_intc>;
209 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
214 pinctrl-names = "default";
215 pinctrl-0 = <&i2c2_pins_a>;
220 pinctrl-names = "default";
221 pinctrl-0 = <&ir0_rx_pins_a>;
226 pinctrl-names = "default";
227 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
228 vmmc-supply = <®_vcc3v3>;
230 cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
243 usb0_id_detect_pin: usb0_id_detect_pin@0 {
245 function = "gpio_in";
249 mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
251 function = "gpio_in";
255 gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
257 function = "gpio_out";
260 led_pins_lamobo_r1: led_pins@0 {
262 function = "gpio_out";
266 #include "axp209.dtsi"
272 &battery_power_supply {
277 gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
283 regulator-min-microvolt = <1000000>;
284 regulator-max-microvolt = <1400000>;
285 regulator-name = "vdd-cpu";
290 regulator-min-microvolt = <1000000>;
291 regulator-max-microvolt = <1400000>;
292 regulator-name = "vdd-int-dll";
296 regulator-name = "vdd-rtc";
301 regulator-min-microvolt = <3000000>;
302 regulator-max-microvolt = <3000000>;
303 regulator-name = "avcc";
311 gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
316 pinctrl-names = "default";
317 pinctrl-0 = <&spi0_pins_a>,
324 pinctrl-names = "default";
325 pinctrl-0 = <&uart0_pins_a>;
330 pinctrl-names = "default";
331 pinctrl-0 = <&uart3_pins_b>;
336 pinctrl-names = "default";
337 pinctrl-0 = <&uart7_pins_a>;
351 pinctrl-names = "default";
352 pinctrl-0 = <&usb0_id_detect_pin>;
353 usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
354 usb0_vbus_power-supply = <&usb_power_supply>;
355 usb0_vbus-supply = <®_usb0_vbus>;
356 usb2_vbus-supply = <®_usb2_vbus>;