arch/arm/boot/dts/sun4i-a10.dtsi

   1 /*
   2  * Copyright 2012 Stefan Roese
   3  * Stefan Roese <sr@denx.de>
   4  *
   5  * This file is dual-licensed: you can use it either under the terms
   6  * of the GPL or the X11 license, at your option. Note that this dual
   7  * licensing only applies to this file, and not this project as a
   8  * whole.
   9  *
  10  *  a) This library is free software; you can redistribute it and/or
  11  *     modify it under the terms of the GNU General Public License as
  12  *     published by the Free Software Foundation; either version 2 of the
  13  *     License, or (at your option) any later version.
  14  *
  15  *     This library is distributed in the hope that it will be useful,
  16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *     GNU General Public License for more details.
  19  *
  20  * Or, alternatively,
  21  *
  22  *  b) Permission is hereby granted, free of charge, to any person
  23  *     obtaining a copy of this software and associated documentation
  24  *     files (the "Software"), to deal in the Software without
  25  *     restriction, including without limitation the rights to use,
  26  *     copy, modify, merge, publish, distribute, sublicense, and/or
  27  *     sell copies of the Software, and to permit persons to whom the
  28  *     Software is furnished to do so, subject to the following
  29  *     conditions:
  30  *
  31  *     The above copyright notice and this permission notice shall be
  32  *     included in all copies or substantial portions of the Software.
  33  *
  34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  41  *     OTHER DEALINGS IN THE SOFTWARE.
  42  */
  43
  44 #include <dt-bindings/thermal/thermal.h>
  45 #include <dt-bindings/dma/sun4i-a10.h>
  46 #include <dt-bindings/clock/sun4i-a10-ccu.h>
  47 #include <dt-bindings/reset/sun4i-a10-ccu.h>
  48
  49 / {
  50         #address-cells = <1>;
  51         #size-cells = <1>;
  52         interrupt-parent = <&intc>;
  53
  54         aliases {
  55                 ethernet0 = &emac;
  56         };
  57
  58         chosen {
  59                 #address-cells = <1>;
  60                 #size-cells = <1>;
  61                 ranges;
  62
  63                 framebuffer-lcd0-hdmi {
  64                         compatible = "allwinner,simple-framebuffer",
  65                                      "simple-framebuffer";
  66                         allwinner,pipeline = "de_be0-lcd0-hdmi";
  67                         clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
  68                                  <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
  69                                  <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
  70                         status = "disabled";
  71                 };
  72
  73                 framebuffer-fe0-lcd0-hdmi {
  74                         compatible = "allwinner,simple-framebuffer",
  75                                      "simple-framebuffer";
  76                         allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
  77                         clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
  78                                  <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
  79                                  <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
  80                                  <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
  81                                  <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
  82                         status = "disabled";
  83                 };
  84
  85                 framebuffer-fe0-lcd0 {
  86                         compatible = "allwinner,simple-framebuffer",
  87                                      "simple-framebuffer";
  88                         allwinner,pipeline = "de_fe0-de_be0-lcd0";
  89                         clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
  90                                  <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
  91                                  <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
  92                                  <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
  93                         status = "disabled";
  94                 };
  95
  96                 framebuffer-fe0-lcd0-tve0 {
  97                         compatible = "allwinner,simple-framebuffer",
  98                                      "simple-framebuffer";
  99                         allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
 100                         clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
 101                                  <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
 102                                  <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
 103                                  <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
 104                                  <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
 105                         status = "disabled";
 106                 };
 107         };
 108
 109         cpus {
 110                 #address-cells = <1>;
 111                 #size-cells = <0>;
 112                 cpu0: cpu@0 {
 113                         device_type = "cpu";
 114                         compatible = "arm,cortex-a8";
 115                         reg = <0x0>;
 116                         clocks = <&ccu CLK_CPU>;
 117                         clock-latency = <244144>; /* 8 32k periods */
 118                         operating-points = <
 119                                 /* kHz    uV */
 120                                 1008000 1400000
 121                                 912000  1350000
 122                                 864000  1300000
 123                                 624000  1250000
 124                                 >;
 125                         #cooling-cells = <2>;
 126                 };
 127         };
 128
 129         thermal-zones {
 130                 cpu-thermal {
 131                         /* milliseconds */
 132                         polling-delay-passive = <250>;
 133                         polling-delay = <1000>;
 134                         thermal-sensors = <&rtp>;
 135
 136                         cooling-maps {
 137                                 map0 {
 138                                         trip = <&cpu_alert0>;
 139                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 140                                 };
 141                         };
 142
 143                         trips {
 144                                 cpu_alert0: cpu-alert0 {
 145                                         /* milliCelsius */
 146                                         temperature = <85000>;
 147                                         hysteresis = <2000>;
 148                                         type = "passive";
 149                                 };
 150
 151                                 cpu_crit: cpu-crit {
 152                                         /* milliCelsius */
 153                                         temperature = <100000>;
 154                                         hysteresis = <2000>;
 155                                         type = "critical";
 156                                 };
 157                         };
 158                 };
 159         };
 160
 161         clocks {
 162                 #address-cells = <1>;
 163                 #size-cells = <1>;
 164                 ranges;
 165
 166                 osc24M: clk-24M {
 167                         #clock-cells = <0>;
 168                         compatible = "fixed-clock";
 169                         clock-frequency = <24000000>;
 170                         clock-output-names = "osc24M";
 171                 };
 172
 173                 osc32k: clk-32k {
 174                         #clock-cells = <0>;
 175                         compatible = "fixed-clock";
 176                         clock-frequency = <32768>;
 177                         clock-output-names = "osc32k";
 178                 };
 179         };
 180
 181         de: display-engine {
 182                 compatible = "allwinner,sun4i-a10-display-engine";
 183                 allwinner,pipelines = <&fe0>, <&fe1>;
 184                 status = "disabled";
 185         };
 186
 187         soc {
 188                 compatible = "simple-bus";
 189                 #address-cells = <1>;
 190                 #size-cells = <1>;
 191                 ranges;
 192
 193                 system-control@1c00000 {
 194                         compatible = "allwinner,sun4i-a10-system-control";
 195                         reg = <0x01c00000 0x30>;
 196                         #address-cells = <1>;
 197                         #size-cells = <1>;
 198                         ranges;
 199
 200                         sram_a: sram@0 {
 201                                 compatible = "mmio-sram";
 202                                 reg = <0x00000000 0xc000>;
 203                                 #address-cells = <1>;
 204                                 #size-cells = <1>;
 205                                 ranges = <0 0x00000000 0xc000>;
 206
 207                                 emac_sram: sram-section@8000 {
 208                                         compatible = "allwinner,sun4i-a10-sram-a3-a4";
 209                                         reg = <0x8000 0x4000>;
 210                                         status = "disabled";
 211                                 };
 212                         };
 213
 214                         sram_d: sram@10000 {
 215                                 compatible = "mmio-sram";
 216                                 reg = <0x00010000 0x1000>;
 217                                 #address-cells = <1>;
 218                                 #size-cells = <1>;
 219                                 ranges = <0 0x00010000 0x1000>;
 220
 221                                 otg_sram: sram-section@0 {
 222                                         compatible = "allwinner,sun4i-a10-sram-d";
 223                                         reg = <0x0000 0x1000>;
 224                                         status = "disabled";
 225                                 };
 226                         };
 227                 };
 228
 229                 dma: dma-controller@1c02000 {
 230                         compatible = "allwinner,sun4i-a10-dma";
 231                         reg = <0x01c02000 0x1000>;
 232                         interrupts = <27>;
 233                         clocks = <&ccu CLK_AHB_DMA>;
 234                         #dma-cells = <2>;
 235                 };
 236
 237                 nfc: nand@1c03000 {
 238                         compatible = "allwinner,sun4i-a10-nand";
 239                         reg = <0x01c03000 0x1000>;
 240                         interrupts = <37>;
 241                         clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
 242                         clock-names = "ahb", "mod";
 243                         dmas = <&dma SUN4I_DMA_DEDICATED 3>;
 244                         dma-names = "rxtx";
 245                         status = "disabled";
 246                         #address-cells = <1>;
 247                         #size-cells = <0>;
 248                 };
 249
 250                 spi0: spi@1c05000 {
 251                         compatible = "allwinner,sun4i-a10-spi";
 252                         reg = <0x01c05000 0x1000>;
 253                         interrupts = <10>;
 254                         clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
 255                         clock-names = "ahb", "mod";
 256                         dmas = <&dma SUN4I_DMA_DEDICATED 27>,
 257                                <&dma SUN4I_DMA_DEDICATED 26>;
 258                         dma-names = "rx", "tx";
 259                         status = "disabled";
 260                         #address-cells = <1>;
 261                         #size-cells = <0>;
 262                 };
 263
 264                 spi1: spi@1c06000 {
 265                         compatible = "allwinner,sun4i-a10-spi";
 266                         reg = <0x01c06000 0x1000>;
 267                         interrupts = <11>;
 268                         clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
 269                         clock-names = "ahb", "mod";
 270                         dmas = <&dma SUN4I_DMA_DEDICATED 9>,
 271                                <&dma SUN4I_DMA_DEDICATED 8>;
 272                         dma-names = "rx", "tx";
 273                         pinctrl-names = "default";
 274                         pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
 275                         status = "disabled";
 276                         #address-cells = <1>;
 277                         #size-cells = <0>;
 278                 };
 279
 280                 emac: ethernet@1c0b000 {
 281                         compatible = "allwinner,sun4i-a10-emac";
 282                         reg = <0x01c0b000 0x1000>;
 283                         interrupts = <55>;
 284                         clocks = <&ccu CLK_AHB_EMAC>;
 285                         allwinner,sram = <&emac_sram 1>;
 286                         pinctrl-names = "default";
 287                         pinctrl-0 = <&emac_pins>;
 288                         status = "disabled";
 289                 };
 290
 291                 mdio: mdio@1c0b080 {
 292                         compatible = "allwinner,sun4i-a10-mdio";
 293                         reg = <0x01c0b080 0x14>;
 294                         status = "disabled";
 295                         #address-cells = <1>;
 296                         #size-cells = <0>;
 297                 };
 298
 299                 tcon0: lcd-controller@1c0c000 {
 300                         compatible = "allwinner,sun4i-a10-tcon";
 301                         reg = <0x01c0c000 0x1000>;
 302                         interrupts = <44>;
 303                         resets = <&ccu RST_TCON0>;
 304                         reset-names = "lcd";
 305                         clocks = <&ccu CLK_AHB_LCD0>,
 306                                  <&ccu CLK_TCON0_CH0>,
 307                                  <&ccu CLK_TCON0_CH1>;
 308                         clock-names = "ahb",
 309                                       "tcon-ch0",
 310                                       "tcon-ch1";
 311                         clock-output-names = "tcon0-pixel-clock";
 312                         dmas = <&dma SUN4I_DMA_DEDICATED 14>;
 313
 314                         ports {
 315                                 #address-cells = <1>;
 316                                 #size-cells = <0>;
 317
 318                                 tcon0_in: port@0 {
 319                                         #address-cells = <1>;
 320                                         #size-cells = <0>;
 321                                         reg = <0>;
 322
 323                                         tcon0_in_be0: endpoint@0 {
 324                                                 reg = <0>;
 325                                                 remote-endpoint = <&be0_out_tcon0>;
 326                                         };
 327
 328                                         tcon0_in_be1: endpoint@1 {
 329                                                 reg = <1>;
 330                                                 remote-endpoint = <&be1_out_tcon0>;
 331                                         };
 332                                 };
 333
 334                                 tcon0_out: port@1 {
 335                                         #address-cells = <1>;
 336                                         #size-cells = <0>;
 337                                         reg = <1>;
 338
 339                                         tcon0_out_hdmi: endpoint@1 {
 340                                                 reg = <1>;
 341                                                 remote-endpoint = <&hdmi_in_tcon0>;
 342                                                 allwinner,tcon-channel = <1>;
 343                                         };
 344                                 };
 345                         };
 346                 };
 347
 348                 tcon1: lcd-controller@1c0d000 {
 349                         compatible = "allwinner,sun4i-a10-tcon";
 350                         reg = <0x01c0d000 0x1000>;
 351                         interrupts = <45>;
 352                         resets = <&ccu RST_TCON1>;
 353                         reset-names = "lcd";
 354                         clocks = <&ccu CLK_AHB_LCD1>,
 355                                  <&ccu CLK_TCON1_CH0>,
 356                                  <&ccu CLK_TCON1_CH1>;
 357                         clock-names = "ahb",
 358                                       "tcon-ch0",
 359                                       "tcon-ch1";
 360                         clock-output-names = "tcon1-pixel-clock";
 361                         dmas = <&dma SUN4I_DMA_DEDICATED 15>;
 362
 363                         ports {
 364                                 #address-cells = <1>;
 365                                 #size-cells = <0>;
 366
 367                                 tcon1_in: port@0 {
 368                                         #address-cells = <1>;
 369                                         #size-cells = <0>;
 370                                         reg = <0>;
 371
 372                                         tcon1_in_be0: endpoint@0 {
 373                                                 reg = <0>;
 374                                                 remote-endpoint = <&be0_out_tcon1>;
 375                                         };
 376
 377                                         tcon1_in_be1: endpoint@1 {
 378                                                 reg = <1>;
 379                                                 remote-endpoint = <&be1_out_tcon1>;
 380                                         };
 381                                 };
 382
 383                                 tcon1_out: port@1 {
 384                                         #address-cells = <1>;
 385                                         #size-cells = <0>;
 386                                         reg = <1>;
 387
 388                                         tcon1_out_hdmi: endpoint@1 {
 389                                                 reg = <1>;
 390                                                 remote-endpoint = <&hdmi_in_tcon1>;
 391                                                 allwinner,tcon-channel = <1>;
 392                                         };
 393                                 };
 394                         };
 395                 };
 396
 397                 mmc0: mmc@1c0f000 {
 398                         compatible = "allwinner,sun4i-a10-mmc";
 399                         reg = <0x01c0f000 0x1000>;
 400                         clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
 401                         clock-names = "ahb", "mmc";
 402                         interrupts = <32>;
 403                         pinctrl-names = "default";
 404                         pinctrl-0 = <&mmc0_pins>;
 405                         status = "disabled";
 406                         #address-cells = <1>;
 407                         #size-cells = <0>;
 408                 };
 409
 410                 mmc1: mmc@1c10000 {
 411                         compatible = "allwinner,sun4i-a10-mmc";
 412                         reg = <0x01c10000 0x1000>;
 413                         clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
 414                         clock-names = "ahb", "mmc";
 415                         interrupts = <33>;
 416                         status = "disabled";
 417                         #address-cells = <1>;
 418                         #size-cells = <0>;
 419                 };
 420
 421                 mmc2: mmc@1c11000 {
 422                         compatible = "allwinner,sun4i-a10-mmc";
 423                         reg = <0x01c11000 0x1000>;
 424                         clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
 425                         clock-names = "ahb", "mmc";
 426                         interrupts = <34>;
 427                         status = "disabled";
 428                         #address-cells = <1>;
 429                         #size-cells = <0>;
 430                 };
 431
 432                 mmc3: mmc@1c12000 {
 433                         compatible = "allwinner,sun4i-a10-mmc";
 434                         reg = <0x01c12000 0x1000>;
 435                         clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
 436                         clock-names = "ahb", "mmc";
 437                         interrupts = <35>;
 438                         status = "disabled";
 439                         #address-cells = <1>;
 440                         #size-cells = <0>;
 441                 };
 442
 443                 usb_otg: usb@1c13000 {
 444                         compatible = "allwinner,sun4i-a10-musb";
 445                         reg = <0x01c13000 0x0400>;
 446                         clocks = <&ccu CLK_AHB_OTG>;
 447                         interrupts = <38>;
 448                         interrupt-names = "mc";
 449                         phys = <&usbphy 0>;
 450                         phy-names = "usb";
 451                         extcon = <&usbphy 0>;
 452                         allwinner,sram = <&otg_sram 1>;
 453                         status = "disabled";
 454                 };
 455
 456                 usbphy: phy@1c13400 {
 457                         #phy-cells = <1>;
 458                         compatible = "allwinner,sun4i-a10-usb-phy";
 459                         reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
 460                         reg-names = "phy_ctrl", "pmu1", "pmu2";
 461                         clocks = <&ccu CLK_USB_PHY>;
 462                         clock-names = "usb_phy";
 463                         resets = <&ccu RST_USB_PHY0>,
 464                                  <&ccu RST_USB_PHY1>,
 465                                  <&ccu RST_USB_PHY2>;
 466                         reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
 467                         status = "disabled";
 468                 };
 469
 470                 ehci0: usb@1c14000 {
 471                         compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
 472                         reg = <0x01c14000 0x100>;
 473                         interrupts = <39>;
 474                         clocks = <&ccu CLK_AHB_EHCI0>;
 475                         phys = <&usbphy 1>;
 476                         phy-names = "usb";
 477                         status = "disabled";
 478                 };
 479
 480                 ohci0: usb@1c14400 {
 481                         compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
 482                         reg = <0x01c14400 0x100>;
 483                         interrupts = <64>;
 484                         clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
 485                         phys = <&usbphy 1>;
 486                         phy-names = "usb";
 487                         status = "disabled";
 488                 };
 489
 490                 crypto: crypto-engine@1c15000 {
 491                         compatible = "allwinner,sun4i-a10-crypto";
 492                         reg = <0x01c15000 0x1000>;
 493                         interrupts = <86>;
 494                         clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
 495                         clock-names = "ahb", "mod";
 496                 };
 497
 498                 hdmi: hdmi@1c16000 {
 499                         compatible = "allwinner,sun4i-a10-hdmi";
 500                         reg = <0x01c16000 0x1000>;
 501                         interrupts = <58>;
 502                         clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
 503                                  <&ccu CLK_PLL_VIDEO0_2X>,
 504                                  <&ccu CLK_PLL_VIDEO1_2X>;
 505                         clock-names = "ahb", "mod", "pll-0", "pll-1";
 506                         dmas = <&dma SUN4I_DMA_NORMAL 16>,
 507                                <&dma SUN4I_DMA_NORMAL 16>,
 508                                <&dma SUN4I_DMA_DEDICATED 24>;
 509                         dma-names = "ddc-tx", "ddc-rx", "audio-tx";
 510                         status = "disabled";
 511
 512                         ports {
 513                                 #address-cells = <1>;
 514                                 #size-cells = <0>;
 515
 516                                 hdmi_in: port@0 {
 517                                         #address-cells = <1>;
 518                                         #size-cells = <0>;
 519                                         reg = <0>;
 520
 521                                         hdmi_in_tcon0: endpoint@0 {
 522                                                 reg = <0>;
 523                                                 remote-endpoint = <&tcon0_out_hdmi>;
 524                                         };
 525
 526                                         hdmi_in_tcon1: endpoint@1 {
 527                                                 reg = <1>;
 528                                                 remote-endpoint = <&tcon1_out_hdmi>;
 529                                         };
 530                                 };
 531
 532                                 hdmi_out: port@1 {
 533                                         reg = <1>;
 534                                 };
 535                         };
 536                 };
 537
 538                 spi2: spi@1c17000 {
 539                         compatible = "allwinner,sun4i-a10-spi";
 540                         reg = <0x01c17000 0x1000>;
 541                         interrupts = <12>;
 542                         clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
 543                         clock-names = "ahb", "mod";
 544                         dmas = <&dma SUN4I_DMA_DEDICATED 29>,
 545                                <&dma SUN4I_DMA_DEDICATED 28>;
 546                         dma-names = "rx", "tx";
 547                         status = "disabled";
 548                         #address-cells = <1>;
 549                         #size-cells = <0>;
 550                 };
 551
 552                 ahci: sata@1c18000 {
 553                         compatible = "allwinner,sun4i-a10-ahci";
 554                         reg = <0x01c18000 0x1000>;
 555                         interrupts = <56>;
 556                         clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
 557                         status = "disabled";
 558                 };
 559
 560                 ehci1: usb@1c1c000 {
 561                         compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
 562                         reg = <0x01c1c000 0x100>;
 563                         interrupts = <40>;
 564                         clocks = <&ccu CLK_AHB_EHCI1>;
 565                         phys = <&usbphy 2>;
 566                         phy-names = "usb";
 567                         status = "disabled";
 568                 };
 569
 570                 ohci1: usb@1c1c400 {
 571                         compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
 572                         reg = <0x01c1c400 0x100>;
 573                         interrupts = <65>;
 574                         clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
 575                         phys = <&usbphy 2>;
 576                         phy-names = "usb";
 577                         status = "disabled";
 578                 };
 579
 580                 spi3: spi@1c1f000 {
 581                         compatible = "allwinner,sun4i-a10-spi";
 582                         reg = <0x01c1f000 0x1000>;
 583                         interrupts = <50>;
 584                         clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
 585                         clock-names = "ahb", "mod";
 586                         dmas = <&dma SUN4I_DMA_DEDICATED 31>,
 587                                <&dma SUN4I_DMA_DEDICATED 30>;
 588                         dma-names = "rx", "tx";
 589                         status = "disabled";
 590                         #address-cells = <1>;
 591                         #size-cells = <0>;
 592                 };
 593
 594                 ccu: clock@1c20000 {
 595                         compatible = "allwinner,sun4i-a10-ccu";
 596                         reg = <0x01c20000 0x400>;
 597                         clocks = <&osc24M>, <&osc32k>;
 598                         clock-names = "hosc", "losc";
 599                         #clock-cells = <1>;
 600                         #reset-cells = <1>;
 601                 };
 602
 603                 intc: interrupt-controller@1c20400 {
 604                         compatible = "allwinner,sun4i-a10-ic";
 605                         reg = <0x01c20400 0x400>;
 606                         interrupt-controller;
 607                         #interrupt-cells = <1>;
 608                 };
 609
 610                 pio: pinctrl@1c20800 {
 611                         compatible = "allwinner,sun4i-a10-pinctrl";
 612                         reg = <0x01c20800 0x400>;
 613                         interrupts = <28>;
 614                         clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
 615                         clock-names = "apb", "hosc", "losc";
 616                         gpio-controller;
 617                         interrupt-controller;
 618                         #interrupt-cells = <3>;
 619                         #gpio-cells = <3>;
 620
 621                         can0_ph_pins: can0-ph-pins {
 622                                 pins = "PH20", "PH21";
 623                                 function = "can";
 624                         };
 625
 626                         emac_pins: emac0-pins {
 627                                 pins = "PA0", "PA1", "PA2",
 628                                        "PA3", "PA4", "PA5", "PA6",
 629                                        "PA7", "PA8", "PA9", "PA10",
 630                                        "PA11", "PA12", "PA13", "PA14",
 631                                        "PA15", "PA16";
 632                                 function = "emac";
 633                         };
 634
 635                         i2c0_pins: i2c0-pins {
 636                                 pins = "PB0", "PB1";
 637                                 function = "i2c0";
 638                         };
 639
 640                         i2c1_pins: i2c1-pins {
 641                                 pins = "PB18", "PB19";
 642                                 function = "i2c1";
 643                         };
 644
 645                         i2c2_pins: i2c2-pins {
 646                                 pins = "PB20", "PB21";
 647                                 function = "i2c2";
 648                         };
 649
 650                         ir0_rx_pins: ir0-rx-pin {
 651                                 pins = "PB4";
 652                                 function = "ir0";
 653                         };
 654
 655                         ir0_tx_pins: ir0-tx-pin {
 656                                 pins = "PB3";
 657                                 function = "ir0";
 658                         };
 659
 660                         ir1_rx_pins: ir1-rx-pin {
 661                                 pins = "PB23";
 662                                 function = "ir1";
 663                         };
 664
 665                         ir1_tx_pins: ir1-tx-pin {
 666                                 pins = "PB22";
 667                                 function = "ir1";
 668                         };
 669
 670                         mmc0_pins: mmc0-pins {
 671                                 pins = "PF0", "PF1", "PF2",
 672                                        "PF3", "PF4", "PF5";
 673                                 function = "mmc0";
 674                                 drive-strength = <30>;
 675                                 bias-pull-up;
 676                         };
 677
 678                         ps2_ch0_pins: ps2-ch0-pins {
 679                                 pins = "PI20", "PI21";
 680                                 function = "ps2";
 681                         };
 682
 683                         ps2_ch1_ph_pins: ps2-ch1-ph-pins {
 684                                 pins = "PH12", "PH13";
 685                                 function = "ps2";
 686                         };
 687
 688                         pwm0_pin: pwm0-pin {
 689                                 pins = "PB2";
 690                                 function = "pwm";
 691                         };
 692
 693                         pwm1_pin: pwm1-pin {
 694                                 pins = "PI3";
 695                                 function = "pwm";
 696                         };
 697
 698                         spdif_tx_pin: spdif-tx-pin {
 699                                 pins = "PB13";
 700                                 function = "spdif";
 701                                 bias-pull-up;
 702                         };
 703
 704                         spi0_pi_pins: spi0-pi-pins {
 705                                 pins = "PI11", "PI12", "PI13";
 706                                 function = "spi0";
 707                         };
 708
 709                         spi0_cs0_pi_pin: spi0-cs0-pi-pin {
 710                                 pins = "PI10";
 711                                 function = "spi0";
 712                         };
 713
 714                         spi1_pins: spi1-pins {
 715                                 pins = "PI17", "PI18", "PI19";
 716                                 function = "spi1";
 717                         };
 718
 719                         spi1_cs0_pin: spi1-cs0-pin {
 720                                 pins = "PI16";
 721                                 function = "spi1";
 722                         };
 723
 724                         spi2_pb_pins: spi2-pb-pins {
 725                                 pins = "PB15", "PB16", "PB17";
 726                                 function = "spi2";
 727                         };
 728
 729                         spi2_pc_pins: spi2-pc-pins {
 730                                 pins = "PC20", "PC21", "PC22";
 731                                 function = "spi2";
 732                         };
 733
 734                         spi2_cs0_pb_pin: spi2-cs0-pb-pin {
 735                                 pins = "PB14";
 736                                 function = "spi2";
 737                         };
 738
 739                         spi2_cs0_pc_pins: spi2-cs0-pc-pin {
 740                                 pins = "PC19";
 741                                 function = "spi2";
 742                         };
 743
 744                         uart0_pb_pins: uart0-pb-pins {
 745                                 pins = "PB22", "PB23";
 746                                 function = "uart0";
 747                         };
 748
 749                         uart0_pf_pins: uart0-pf-pins {
 750                                 pins = "PF2", "PF4";
 751                                 function = "uart0";
 752                         };
 753
 754                         uart1_pins: uart1-pins {
 755                                 pins = "PA10", "PA11";
 756                                 function = "uart1";
 757                         };
 758                 };
 759
 760                 timer@1c20c00 {
 761                         compatible = "allwinner,sun4i-a10-timer";
 762                         reg = <0x01c20c00 0x90>;
 763                         interrupts = <22>;
 764                         clocks = <&osc24M>;
 765                 };
 766
 767                 wdt: watchdog@1c20c90 {
 768                         compatible = "allwinner,sun4i-a10-wdt";
 769                         reg = <0x01c20c90 0x10>;
 770                 };
 771
 772                 rtc: rtc@1c20d00 {
 773                         compatible = "allwinner,sun4i-a10-rtc";
 774                         reg = <0x01c20d00 0x20>;
 775                         interrupts = <24>;
 776                 };
 777
 778                 pwm: pwm@1c20e00 {
 779                         compatible = "allwinner,sun4i-a10-pwm";
 780                         reg = <0x01c20e00 0xc>;
 781                         clocks = <&osc24M>;
 782                         #pwm-cells = <3>;
 783                         status = "disabled";
 784                 };
 785
 786                 spdif: spdif@1c21000 {
 787                         #sound-dai-cells = <0>;
 788                         compatible = "allwinner,sun4i-a10-spdif";
 789                         reg = <0x01c21000 0x400>;
 790                         interrupts = <13>;
 791                         clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
 792                         clock-names = "apb", "spdif";
 793                         dmas = <&dma SUN4I_DMA_NORMAL 2>,
 794                                <&dma SUN4I_DMA_NORMAL 2>;
 795                         dma-names = "rx", "tx";
 796                         status = "disabled";
 797                 };
 798
 799                 ir0: ir@1c21800 {
 800                         compatible = "allwinner,sun4i-a10-ir";
 801                         clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
 802                         clock-names = "apb", "ir";
 803                         interrupts = <5>;
 804                         reg = <0x01c21800 0x40>;
 805                         status = "disabled";
 806                 };
 807
 808                 ir1: ir@1c21c00 {
 809                         compatible = "allwinner,sun4i-a10-ir";
 810                         clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
 811                         clock-names = "apb", "ir";
 812                         interrupts = <6>;
 813                         reg = <0x01c21c00 0x40>;
 814                         status = "disabled";
 815                 };
 816
 817                 i2s0: i2s@1c22400 {
 818                         #sound-dai-cells = <0>;
 819                         compatible = "allwinner,sun4i-a10-i2s";
 820                         reg = <0x01c22400 0x400>;
 821                         interrupts = <16>;
 822                         clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
 823                         clock-names = "apb", "mod";
 824                         dmas = <&dma SUN4I_DMA_NORMAL 3>,
 825                                <&dma SUN4I_DMA_NORMAL 3>;
 826                         dma-names = "rx", "tx";
 827                         status = "disabled";
 828                 };
 829
 830                 lradc: lradc@1c22800 {
 831                         compatible = "allwinner,sun4i-a10-lradc-keys";
 832                         reg = <0x01c22800 0x100>;
 833                         interrupts = <31>;
 834                         status = "disabled";
 835                 };
 836
 837                 codec: codec@1c22c00 {
 838                         #sound-dai-cells = <0>;
 839                         compatible = "allwinner,sun4i-a10-codec";
 840                         reg = <0x01c22c00 0x40>;
 841                         interrupts = <30>;
 842                         clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
 843                         clock-names = "apb", "codec";
 844                         dmas = <&dma SUN4I_DMA_NORMAL 19>,
 845                                <&dma SUN4I_DMA_NORMAL 19>;
 846                         dma-names = "rx", "tx";
 847                         status = "disabled";
 848                 };
 849
 850                 sid: eeprom@1c23800 {
 851                         compatible = "allwinner,sun4i-a10-sid";
 852                         reg = <0x01c23800 0x10>;
 853                 };
 854
 855                 rtp: rtp@1c25000 {
 856                         compatible = "allwinner,sun4i-a10-ts";
 857                         reg = <0x01c25000 0x100>;
 858                         interrupts = <29>;
 859                         #thermal-sensor-cells = <0>;
 860                 };
 861
 862                 uart0: serial@1c28000 {
 863                         compatible = "snps,dw-apb-uart";
 864                         reg = <0x01c28000 0x400>;
 865                         interrupts = <1>;
 866                         reg-shift = <2>;
 867                         reg-io-width = <4>;
 868                         clocks = <&ccu CLK_APB1_UART0>;
 869                         status = "disabled";
 870                 };
 871
 872                 uart1: serial@1c28400 {
 873                         compatible = "snps,dw-apb-uart";
 874                         reg = <0x01c28400 0x400>;
 875                         interrupts = <2>;
 876                         reg-shift = <2>;
 877                         reg-io-width = <4>;
 878                         clocks = <&ccu CLK_APB1_UART1>;
 879                         status = "disabled";
 880                 };
 881
 882                 uart2: serial@1c28800 {
 883                         compatible = "snps,dw-apb-uart";
 884                         reg = <0x01c28800 0x400>;
 885                         interrupts = <3>;
 886                         reg-shift = <2>;
 887                         reg-io-width = <4>;
 888                         clocks = <&ccu CLK_APB1_UART2>;
 889                         status = "disabled";
 890                 };
 891
 892                 uart3: serial@1c28c00 {
 893                         compatible = "snps,dw-apb-uart";
 894                         reg = <0x01c28c00 0x400>;
 895                         interrupts = <4>;
 896                         reg-shift = <2>;
 897                         reg-io-width = <4>;
 898                         clocks = <&ccu CLK_APB1_UART3>;
 899                         status = "disabled";
 900                 };
 901
 902                 uart4: serial@1c29000 {
 903                         compatible = "snps,dw-apb-uart";
 904                         reg = <0x01c29000 0x400>;
 905                         interrupts = <17>;
 906                         reg-shift = <2>;
 907                         reg-io-width = <4>;
 908                         clocks = <&ccu CLK_APB1_UART4>;
 909                         status = "disabled";
 910                 };
 911
 912                 uart5: serial@1c29400 {
 913                         compatible = "snps,dw-apb-uart";
 914                         reg = <0x01c29400 0x400>;
 915                         interrupts = <18>;
 916                         reg-shift = <2>;
 917                         reg-io-width = <4>;
 918                         clocks = <&ccu CLK_APB1_UART5>;
 919                         status = "disabled";
 920                 };
 921
 922                 uart6: serial@1c29800 {
 923                         compatible = "snps,dw-apb-uart";
 924                         reg = <0x01c29800 0x400>;
 925                         interrupts = <19>;
 926                         reg-shift = <2>;
 927                         reg-io-width = <4>;
 928                         clocks = <&ccu CLK_APB1_UART6>;
 929                         status = "disabled";
 930                 };
 931
 932                 uart7: serial@1c29c00 {
 933                         compatible = "snps,dw-apb-uart";
 934                         reg = <0x01c29c00 0x400>;
 935                         interrupts = <20>;
 936                         reg-shift = <2>;
 937                         reg-io-width = <4>;
 938                         clocks = <&ccu CLK_APB1_UART7>;
 939                         status = "disabled";
 940                 };
 941
 942                 ps20: ps2@1c2a000 {
 943                         compatible = "allwinner,sun4i-a10-ps2";
 944                         reg = <0x01c2a000 0x400>;
 945                         interrupts = <62>;
 946                         clocks = <&ccu CLK_APB1_PS20>;
 947                         status = "disabled";
 948                 };
 949
 950                 ps21: ps2@1c2a400 {
 951                         compatible = "allwinner,sun4i-a10-ps2";
 952                         reg = <0x01c2a400 0x400>;
 953                         interrupts = <63>;
 954                         clocks = <&ccu CLK_APB1_PS21>;
 955                         status = "disabled";
 956                 };
 957
 958                 i2c0: i2c@1c2ac00 {
 959                         compatible = "allwinner,sun4i-a10-i2c";
 960                         reg = <0x01c2ac00 0x400>;
 961                         interrupts = <7>;
 962                         clocks = <&ccu CLK_APB1_I2C0>;
 963                         pinctrl-names = "default";
 964                         pinctrl-0 = <&i2c0_pins>;
 965                         status = "disabled";
 966                         #address-cells = <1>;
 967                         #size-cells = <0>;
 968                 };
 969
 970                 i2c1: i2c@1c2b000 {
 971                         compatible = "allwinner,sun4i-a10-i2c";
 972                         reg = <0x01c2b000 0x400>;
 973                         interrupts = <8>;
 974                         clocks = <&ccu CLK_APB1_I2C1>;
 975                         pinctrl-names = "default";
 976                         pinctrl-0 = <&i2c1_pins>;
 977                         status = "disabled";
 978                         #address-cells = <1>;
 979                         #size-cells = <0>;
 980                 };
 981
 982                 i2c2: i2c@1c2b400 {
 983                         compatible = "allwinner,sun4i-a10-i2c";
 984                         reg = <0x01c2b400 0x400>;
 985                         interrupts = <9>;
 986                         clocks = <&ccu CLK_APB1_I2C2>;
 987                         pinctrl-names = "default";
 988                         pinctrl-0 = <&i2c2_pins>;
 989                         status = "disabled";
 990                         #address-cells = <1>;
 991                         #size-cells = <0>;
 992                 };
 993
 994                 can0: can@1c2bc00 {
 995                         compatible = "allwinner,sun4i-a10-can";
 996                         reg = <0x01c2bc00 0x400>;
 997                         interrupts = <26>;
 998                         clocks = <&ccu CLK_APB1_CAN>;
 999                         status = "disabled";
1000                 };
1001
1002                 mali: gpu@1c40000 {
1003                         compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
1004                         reg = <0x01c40000 0x10000>;
1005                         interrupts = <69>,
1006                                      <70>,
1007                                      <71>,
1008                                      <72>,
1009                                      <73>;
1010                         interrupt-names = "gp",
1011                                           "gpmmu",
1012                                           "pp0",
1013                                           "ppmmu0",
1014                                           "pmu";
1015                         clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
1016                         clock-names = "bus", "core";
1017                         resets = <&ccu RST_GPU>;
1018
1019                         assigned-clocks = <&ccu CLK_GPU>;
1020                         assigned-clock-rates = <384000000>;
1021                 };
1022
1023                 fe0: display-frontend@1e00000 {
1024                         compatible = "allwinner,sun4i-a10-display-frontend";
1025                         reg = <0x01e00000 0x20000>;
1026                         interrupts = <47>;
1027                         clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
1028                                  <&ccu CLK_DRAM_DE_FE0>;
1029                         clock-names = "ahb", "mod",
1030                                       "ram";
1031                         resets = <&ccu RST_DE_FE0>;
1032
1033                         ports {
1034                                 #address-cells = <1>;
1035                                 #size-cells = <0>;
1036
1037                                 fe0_out: port@1 {
1038                                         #address-cells = <1>;
1039                                         #size-cells = <0>;
1040                                         reg = <1>;
1041
1042                                         fe0_out_be0: endpoint@0 {
1043                                                 reg = <0>;
1044                                                 remote-endpoint = <&be0_in_fe0>;
1045                                         };
1046
1047                                         fe0_out_be1: endpoint@1 {
1048                                                 reg = <1>;
1049                                                 remote-endpoint = <&be1_in_fe0>;
1050                                         };
1051                                 };
1052                         };
1053                 };
1054
1055                 fe1: display-frontend@1e20000 {
1056                         compatible = "allwinner,sun4i-a10-display-frontend";
1057                         reg = <0x01e20000 0x20000>;
1058                         interrupts = <48>;
1059                         clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
1060                                  <&ccu CLK_DRAM_DE_FE1>;
1061                         clock-names = "ahb", "mod",
1062                                       "ram";
1063                         resets = <&ccu RST_DE_FE1>;
1064
1065                         ports {
1066                                 #address-cells = <1>;
1067                                 #size-cells = <0>;
1068
1069                                 fe1_out: port@1 {
1070                                         #address-cells = <1>;
1071                                         #size-cells = <0>;
1072                                         reg = <1>;
1073
1074                                         fe1_out_be0: endpoint@0 {
1075                                                 reg = <0>;
1076                                                 remote-endpoint = <&be0_in_fe1>;
1077                                         };
1078
1079                                         fe1_out_be1: endpoint@1 {
1080                                                 reg = <1>;
1081                                                 remote-endpoint = <&be1_in_fe1>;
1082                                         };
1083                                 };
1084                         };
1085                 };
1086
1087                 be1: display-backend@1e40000 {
1088                         compatible = "allwinner,sun4i-a10-display-backend";
1089                         reg = <0x01e40000 0x10000>;
1090                         interrupts = <48>;
1091                         clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
1092                                  <&ccu CLK_DRAM_DE_BE1>;
1093                         clock-names = "ahb", "mod",
1094                                       "ram";
1095                         resets = <&ccu RST_DE_BE1>;
1096
1097                         ports {
1098                                 #address-cells = <1>;
1099                                 #size-cells = <0>;
1100
1101                                 be1_in: port@0 {
1102                                         #address-cells = <1>;
1103                                         #size-cells = <0>;
1104                                         reg = <0>;
1105
1106                                         be1_in_fe0: endpoint@0 {
1107                                                 reg = <0>;
1108                                                 remote-endpoint = <&fe0_out_be1>;
1109                                         };
1110
1111                                         be1_in_fe1: endpoint@1 {
1112                                                 reg = <1>;
1113                                                 remote-endpoint = <&fe1_out_be1>;
1114                                         };
1115                                 };
1116
1117                                 be1_out: port@1 {
1118                                         #address-cells = <1>;
1119                                         #size-cells = <0>;
1120                                         reg = <1>;
1121
1122                                         be1_out_tcon0: endpoint@0 {
1123                                                 reg = <0>;
1124                                                 remote-endpoint = <&tcon0_in_be1>;
1125                                         };
1126
1127                                         be1_out_tcon1: endpoint@1 {
1128                                                 reg = <1>;
1129                                                 remote-endpoint = <&tcon1_in_be1>;
1130                                         };
1131                                 };
1132                         };
1133                 };
1134
1135                 be0: display-backend@1e60000 {
1136                         compatible = "allwinner,sun4i-a10-display-backend";
1137                         reg = <0x01e60000 0x10000>;
1138                         interrupts = <47>;
1139                         clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
1140                                  <&ccu CLK_DRAM_DE_BE0>;
1141                         clock-names = "ahb", "mod",
1142                                       "ram";
1143                         resets = <&ccu RST_DE_BE0>;
1144
1145                         ports {
1146                                 #address-cells = <1>;
1147                                 #size-cells = <0>;
1148
1149                                 be0_in: port@0 {
1150                                         #address-cells = <1>;
1151                                         #size-cells = <0>;
1152                                         reg = <0>;
1153
1154                                         be0_in_fe0: endpoint@0 {
1155                                                 reg = <0>;
1156                                                 remote-endpoint = <&fe0_out_be0>;
1157                                         };
1158
1159                                         be0_in_fe1: endpoint@1 {
1160                                                 reg = <1>;
1161                                                 remote-endpoint = <&fe1_out_be0>;
1162                                         };
1163                                 };
1164
1165                                 be0_out: port@1 {
1166                                         #address-cells = <1>;
1167                                         #size-cells = <0>;
1168                                         reg = <1>;
1169
1170                                         be0_out_tcon0: endpoint@0 {
1171                                                 reg = <0>;
1172                                                 remote-endpoint = <&tcon0_in_be0>;
1173                                         };
1174
1175                                         be0_out_tcon1: endpoint@1 {
1176                                                 reg = <1>;
1177                                                 remote-endpoint = <&tcon1_in_be0>;
1178                                         };
1179                                 };
1180                         };
1181                 };
1182         };
1183 };