2 * Copyright 2015 Gábor Nyers
4 * Gábor Nyers <gabor.nyers@gmail.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "sun4i-a10.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/pinctrl/sun4i-a10.h>
54 compatible = "jesurun,q5", "allwinner,sun4i-a10";
61 stdout-path = "serial0:115200n8";
65 compatible = "gpio-leds";
66 pinctrl-names = "default";
67 pinctrl-0 = <&led_pins_q5>;
70 label = "q5:green:usr";
71 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
76 reg_emac_3v3: emac-3v3 {
77 compatible = "regulator-fixed";
78 pinctrl-names = "default";
79 pinctrl-0 = <&emac_power_pin_q5>;
80 regulator-name = "emac-3v3";
81 regulator-min-microvolt = <3300000>;
82 regulator-max-microvolt = <3300000>;
83 startup-delay-us = <20000>;
85 gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
102 pinctrl-names = "default";
103 pinctrl-0 = <&emac_pins_a>;
113 pinctrl-names = "default";
114 pinctrl-0 = <&i2c0_pins_a>;
118 compatible = "x-powers,axp209";
122 interrupt-controller;
123 #interrupt-cells = <1>;
128 pinctrl-names = "default";
129 pinctrl-0 = <&ir0_rx_pins_a>;
134 phy-supply = <®_emac_3v3>;
137 phy1: ethernet-phy@1 {
143 pinctrl-names = "default";
144 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
145 vmmc-supply = <®_vcc3v3>;
147 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
165 emac_power_pin_q5: emac_power_pin@0 {
166 allwinner,pins = "PH19";
167 allwinner,function = "gpio_out";
168 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
169 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
172 led_pins_q5: led_pins@0 {
173 allwinner,pins = "PH20";
174 allwinner,function = "gpio_out";
175 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
176 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&uart0_pins_a>;
205 usb0_vbus-supply = <®_usb0_vbus>;
206 usb1_vbus-supply = <®_usb1_vbus>;
207 usb2_vbus-supply = <®_usb2_vbus>;