arch/arm/boot/dts/stm32h743.dtsi

   1 /*
   2  * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 #include "skeleton.dtsi"
  44 #include "armv7-m.dtsi"
  45 #include <dt-bindings/clock/stm32h7-clks.h>
  46 #include <dt-bindings/mfd/stm32h7-rcc.h>
  47 #include <dt-bindings/interrupt-controller/irq.h>
  48
  49 / {
  50         clocks {
  51                 clk_hse: clk-hse {
  52                         #clock-cells = <0>;
  53                         compatible = "fixed-clock";
  54                         clock-frequency = <0>;
  55                 };
  56
  57                 clk_lse: clk-lse {
  58                         #clock-cells = <0>;
  59                         compatible = "fixed-clock";
  60                         clock-frequency = <32768>;
  61                 };
  62
  63                 clk_i2s: i2s_ckin {
  64                         #clock-cells = <0>;
  65                         compatible = "fixed-clock";
  66                         clock-frequency = <0>;
  67                 };
  68         };
  69
  70         soc {
  71                 timer5: timer@40000c00 {
  72                         compatible = "st,stm32-timer";
  73                         reg = <0x40000c00 0x400>;
  74                         interrupts = <50>;
  75                         clocks = <&rcc TIM5_CK>;
  76                 };
  77
  78                 lptimer1: timer@40002400 {
  79                         #address-cells = <1>;
  80                         #size-cells = <0>;
  81                         compatible = "st,stm32-lptimer";
  82                         reg = <0x40002400 0x400>;
  83                         clocks = <&rcc LPTIM1_CK>;
  84                         clock-names = "mux";
  85                         status = "disabled";
  86
  87                         pwm {
  88                                 compatible = "st,stm32-pwm-lp";
  89                                 #pwm-cells = <3>;
  90                                 status = "disabled";
  91                         };
  92
  93                         trigger@0 {
  94                                 compatible = "st,stm32-lptimer-trigger";
  95                                 reg = <0>;
  96                                 status = "disabled";
  97                         };
  98
  99                         counter {
 100                                 compatible = "st,stm32-lptimer-counter";
 101                                 status = "disabled";
 102                         };
 103                 };
 104
 105                 spi2: spi@40003800 {
 106                         #address-cells = <1>;
 107                         #size-cells = <0>;
 108                         compatible = "st,stm32h7-spi";
 109                         reg = <0x40003800 0x400>;
 110                         interrupts = <36>;
 111                         clocks = <&rcc SPI2_CK>;
 112                         status = "disabled";
 113
 114                 };
 115
 116                 spi3: spi@40003c00 {
 117                         #address-cells = <1>;
 118                         #size-cells = <0>;
 119                         compatible = "st,stm32h7-spi";
 120                         reg = <0x40003c00 0x400>;
 121                         interrupts = <51>;
 122                         clocks = <&rcc SPI3_CK>;
 123                         status = "disabled";
 124                 };
 125
 126                 usart2: serial@40004400 {
 127                         compatible = "st,stm32f7-uart";
 128                         reg = <0x40004400 0x400>;
 129                         interrupts = <38>;
 130                         status = "disabled";
 131                         clocks = <&rcc USART2_CK>;
 132                 };
 133
 134                 i2c1: i2c@40005400 {
 135                         compatible = "st,stm32f7-i2c";
 136                         #address-cells = <1>;
 137                         #size-cells = <0>;
 138                         reg = <0x40005400 0x400>;
 139                         interrupts = <31>,
 140                                      <32>;
 141                         resets = <&rcc STM32H7_APB1L_RESET(I2C1)>;
 142                         clocks = <&rcc I2C1_CK>;
 143                         status = "disabled";
 144                 };
 145
 146                 i2c2: i2c@40005800 {
 147                         compatible = "st,stm32f7-i2c";
 148                         #address-cells = <1>;
 149                         #size-cells = <0>;
 150                         reg = <0x40005800 0x400>;
 151                         interrupts = <33>,
 152                                      <34>;
 153                         resets = <&rcc STM32H7_APB1L_RESET(I2C2)>;
 154                         clocks = <&rcc I2C2_CK>;
 155                         status = "disabled";
 156                 };
 157
 158                 i2c3: i2c@40005C00 {
 159                         compatible = "st,stm32f7-i2c";
 160                         #address-cells = <1>;
 161                         #size-cells = <0>;
 162                         reg = <0x40005C00 0x400>;
 163                         interrupts = <72>,
 164                                      <73>;
 165                         resets = <&rcc STM32H7_APB1L_RESET(I2C3)>;
 166                         clocks = <&rcc I2C3_CK>;
 167                         status = "disabled";
 168                 };
 169
 170                 dac: dac@40007400 {
 171                         compatible = "st,stm32h7-dac-core";
 172                         reg = <0x40007400 0x400>;
 173                         clocks = <&rcc DAC12_CK>;
 174                         clock-names = "pclk";
 175                         #address-cells = <1>;
 176                         #size-cells = <0>;
 177                         status = "disabled";
 178
 179                         dac1: dac@1 {
 180                                 compatible = "st,stm32-dac";
 181                                 #io-channels-cells = <1>;
 182                                 reg = <1>;
 183                                 status = "disabled";
 184                         };
 185
 186                         dac2: dac@2 {
 187                                 compatible = "st,stm32-dac";
 188                                 #io-channels-cells = <1>;
 189                                 reg = <2>;
 190                                 status = "disabled";
 191                         };
 192                 };
 193
 194                 usart1: serial@40011000 {
 195                         compatible = "st,stm32f7-uart";
 196                         reg = <0x40011000 0x400>;
 197                         interrupts = <37>;
 198                         status = "disabled";
 199                         clocks = <&rcc USART1_CK>;
 200                 };
 201
 202                 spi1: spi@40013000 {
 203                         #address-cells = <1>;
 204                         #size-cells = <0>;
 205                         compatible = "st,stm32h7-spi";
 206                         reg = <0x40013000 0x400>;
 207                         interrupts = <35>;
 208                         clocks = <&rcc SPI1_CK>;
 209                         status = "disabled";
 210                 };
 211
 212                 spi4: spi@40013400 {
 213                         #address-cells = <1>;
 214                         #size-cells = <0>;
 215                         compatible = "st,stm32h7-spi";
 216                         reg = <0x40013400 0x400>;
 217                         interrupts = <84>;
 218                         clocks = <&rcc SPI4_CK>;
 219                         status = "disabled";
 220                 };
 221
 222                 spi5: spi@40015000 {
 223                         #address-cells = <1>;
 224                         #size-cells = <0>;
 225                         compatible = "st,stm32h7-spi";
 226                         reg = <0x40015000 0x400>;
 227                         interrupts = <85>;
 228                         clocks = <&rcc SPI5_CK>;
 229                         status = "disabled";
 230                 };
 231
 232                 dma1: dma@40020000 {
 233                         compatible = "st,stm32-dma";
 234                         reg = <0x40020000 0x400>;
 235                         interrupts = <11>,
 236                                      <12>,
 237                                      <13>,
 238                                      <14>,
 239                                      <15>,
 240                                      <16>,
 241                                      <17>,
 242                                      <47>;
 243                         clocks = <&rcc DMA1_CK>;
 244                         #dma-cells = <4>;
 245                         st,mem2mem;
 246                         dma-requests = <8>;
 247                         status = "disabled";
 248                 };
 249
 250                 dma2: dma@40020400 {
 251                         compatible = "st,stm32-dma";
 252                         reg = <0x40020400 0x400>;
 253                         interrupts = <56>,
 254                                      <57>,
 255                                      <58>,
 256                                      <59>,
 257                                      <60>,
 258                                      <68>,
 259                                      <69>,
 260                                      <70>;
 261                         clocks = <&rcc DMA2_CK>;
 262                         #dma-cells = <4>;
 263                         st,mem2mem;
 264                         dma-requests = <8>;
 265                         status = "disabled";
 266                 };
 267
 268                 dmamux1: dma-router@40020800 {
 269                         compatible = "st,stm32h7-dmamux";
 270                         reg = <0x40020800 0x1c>;
 271                         #dma-cells = <3>;
 272                         dma-channels = <16>;
 273                         dma-requests = <128>;
 274                         dma-masters = <&dma1 &dma2>;
 275                         clocks = <&rcc DMA1_CK>;
 276                 };
 277
 278                 adc_12: adc@40022000 {
 279                         compatible = "st,stm32h7-adc-core";
 280                         reg = <0x40022000 0x400>;
 281                         interrupts = <18>;
 282                         clocks = <&rcc ADC12_CK>;
 283                         clock-names = "bus";
 284                         interrupt-controller;
 285                         #interrupt-cells = <1>;
 286                         #address-cells = <1>;
 287                         #size-cells = <0>;
 288                         status = "disabled";
 289
 290                         adc1: adc@0 {
 291                                 compatible = "st,stm32h7-adc";
 292                                 #io-channel-cells = <1>;
 293                                 reg = <0x0>;
 294                                 interrupt-parent = <&adc_12>;
 295                                 interrupts = <0>;
 296                                 status = "disabled";
 297                         };
 298
 299                         adc2: adc@100 {
 300                                 compatible = "st,stm32h7-adc";
 301                                 #io-channel-cells = <1>;
 302                                 reg = <0x100>;
 303                                 interrupt-parent = <&adc_12>;
 304                                 interrupts = <1>;
 305                                 status = "disabled";
 306                         };
 307                 };
 308
 309                 usbotg_hs: usb@40040000 {
 310                         compatible = "st,stm32f7-hsotg";
 311                         reg = <0x40040000 0x40000>;
 312                         interrupts = <77>;
 313                         clocks = <&rcc USB1OTG_CK>;
 314                         clock-names = "otg";
 315                         g-rx-fifo-size = <256>;
 316                         g-np-tx-fifo-size = <32>;
 317                         g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
 318                         status = "disabled";
 319                 };
 320
 321                 usbotg_fs: usb@40080000 {
 322                         compatible = "st,stm32f4x9-fsotg";
 323                         reg = <0x40080000 0x40000>;
 324                         interrupts = <101>;
 325                         clocks = <&rcc USB2OTG_CK>;
 326                         clock-names = "otg";
 327                         status = "disabled";
 328                 };
 329
 330                 mdma1: dma@52000000 {
 331                         compatible = "st,stm32h7-mdma";
 332                         reg = <0x52000000 0x1000>;
 333                         interrupts = <122>;
 334                         clocks = <&rcc MDMA_CK>;
 335                         #dma-cells = <5>;
 336                         dma-channels = <16>;
 337                         dma-requests = <32>;
 338                 };
 339
 340                 exti: interrupt-controller@58000000 {
 341                         compatible = "st,stm32h7-exti";
 342                         interrupt-controller;
 343                         #interrupt-cells = <2>;
 344                         reg = <0x58000000 0x400>;
 345                         interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <62>, <76>;
 346                 };
 347
 348                 syscfg: system-config@58000400 {
 349                         compatible = "syscon";
 350                         reg = <0x58000400 0x400>;
 351                 };
 352
 353                 spi6: spi@58001400 {
 354                         #address-cells = <1>;
 355                         #size-cells = <0>;
 356                         compatible = "st,stm32h7-spi";
 357                         reg = <0x58001400 0x400>;
 358                         interrupts = <86>;
 359                         clocks = <&rcc SPI6_CK>;
 360                         status = "disabled";
 361                 };
 362
 363                 i2c4: i2c@58001C00 {
 364                         compatible = "st,stm32f7-i2c";
 365                         #address-cells = <1>;
 366                         #size-cells = <0>;
 367                         reg = <0x58001C00 0x400>;
 368                         interrupts = <95>,
 369                                      <96>;
 370                         resets = <&rcc STM32H7_APB4_RESET(I2C4)>;
 371                         clocks = <&rcc I2C4_CK>;
 372                         status = "disabled";
 373                 };
 374
 375                 lptimer2: timer@58002400 {
 376                         #address-cells = <1>;
 377                         #size-cells = <0>;
 378                         compatible = "st,stm32-lptimer";
 379                         reg = <0x58002400 0x400>;
 380                         clocks = <&rcc LPTIM2_CK>;
 381                         clock-names = "mux";
 382                         status = "disabled";
 383
 384                         pwm {
 385                                 compatible = "st,stm32-pwm-lp";
 386                                 #pwm-cells = <3>;
 387                                 status = "disabled";
 388                         };
 389
 390                         trigger@1 {
 391                                 compatible = "st,stm32-lptimer-trigger";
 392                                 reg = <1>;
 393                                 status = "disabled";
 394                         };
 395
 396                         counter {
 397                                 compatible = "st,stm32-lptimer-counter";
 398                                 status = "disabled";
 399                         };
 400                 };
 401
 402                 lptimer3: timer@58002800 {
 403                         #address-cells = <1>;
 404                         #size-cells = <0>;
 405                         compatible = "st,stm32-lptimer";
 406                         reg = <0x58002800 0x400>;
 407                         clocks = <&rcc LPTIM3_CK>;
 408                         clock-names = "mux";
 409                         status = "disabled";
 410
 411                         pwm {
 412                                 compatible = "st,stm32-pwm-lp";
 413                                 #pwm-cells = <3>;
 414                                 status = "disabled";
 415                         };
 416
 417                         trigger@2 {
 418                                 compatible = "st,stm32-lptimer-trigger";
 419                                 reg = <2>;
 420                                 status = "disabled";
 421                         };
 422                 };
 423
 424                 lptimer4: timer@58002c00 {
 425                         compatible = "st,stm32-lptimer";
 426                         reg = <0x58002c00 0x400>;
 427                         clocks = <&rcc LPTIM4_CK>;
 428                         clock-names = "mux";
 429                         status = "disabled";
 430
 431                         pwm {
 432                                 compatible = "st,stm32-pwm-lp";
 433                                 #pwm-cells = <3>;
 434                                 status = "disabled";
 435                         };
 436                 };
 437
 438                 lptimer5: timer@58003000 {
 439                         compatible = "st,stm32-lptimer";
 440                         reg = <0x58003000 0x400>;
 441                         clocks = <&rcc LPTIM5_CK>;
 442                         clock-names = "mux";
 443                         status = "disabled";
 444
 445                         pwm {
 446                                 compatible = "st,stm32-pwm-lp";
 447                                 #pwm-cells = <3>;
 448                                 status = "disabled";
 449                         };
 450                 };
 451
 452                 vrefbuf: regulator@58003c00 {
 453                         compatible = "st,stm32-vrefbuf";
 454                         reg = <0x58003C00 0x8>;
 455                         clocks = <&rcc VREF_CK>;
 456                         regulator-min-microvolt = <1500000>;
 457                         regulator-max-microvolt = <2500000>;
 458                         status = "disabled";
 459                 };
 460
 461                 rtc: rtc@58004000 {
 462                         compatible = "st,stm32h7-rtc";
 463                         reg = <0x58004000 0x400>;
 464                         clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
 465                         clock-names = "pclk", "rtc_ck";
 466                         assigned-clocks = <&rcc RTC_CK>;
 467                         assigned-clock-parents = <&rcc LSE_CK>;
 468                         interrupt-parent = <&exti>;
 469                         interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 470                         interrupt-names = "alarm";
 471                         st,syscfg = <&pwrcfg>;
 472                         status = "disabled";
 473                 };
 474
 475                 rcc: reset-clock-controller@58024400 {
 476                         compatible = "st,stm32h743-rcc", "st,stm32-rcc";
 477                         reg = <0x58024400 0x400>;
 478                         #clock-cells = <1>;
 479                         #reset-cells = <1>;
 480                         clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>;
 481                         st,syscfg = <&pwrcfg>;
 482                 };
 483
 484                 pwrcfg: power-config@58024800 {
 485                         compatible = "syscon";
 486                         reg = <0x58024800 0x400>;
 487                 };
 488
 489                 adc_3: adc@58026000 {
 490                         compatible = "st,stm32h7-adc-core";
 491                         reg = <0x58026000 0x400>;
 492                         interrupts = <127>;
 493                         clocks = <&rcc ADC3_CK>;
 494                         clock-names = "bus";
 495                         interrupt-controller;
 496                         #interrupt-cells = <1>;
 497                         #address-cells = <1>;
 498                         #size-cells = <0>;
 499                         status = "disabled";
 500
 501                         adc3: adc@0 {
 502                                 compatible = "st,stm32h7-adc";
 503                                 #io-channel-cells = <1>;
 504                                 reg = <0x0>;
 505                                 interrupt-parent = <&adc_3>;
 506                                 interrupts = <0>;
 507                                 status = "disabled";
 508                         };
 509                 };
 510         };
 511 };
 512
 513 &systick {
 514         clock-frequency = <250000000>;
 515         status = "okay";
 516 };