1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
4 * Author: Patrice Chotard <patrice.chotard@st.com>
7 #include "stih410.dtsi"
8 #include <dt-bindings/gpio/gpio.h>
11 model = "STiH410 B2260";
12 compatible = "st,stih410-b2260", "st,stih410";
19 device_type = "memory";
20 reg = <0x40000000 0x40000000>;
25 ethernet0 = ðernet0;
29 compatible = "gpio-leds";
31 label = "User_green_1";
32 gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
33 linux,default-trigger = "heartbeat";
34 default-state = "off";
38 label = "User_green_2";
39 gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
40 default-state = "off";
44 label = "User_green_3";
45 gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
46 default-state = "off";
50 label = "User_green_4";
51 gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
52 default-state = "off";
57 compatible = "simple-audio-card";
58 simple-audio-card,name = "STI-B2260";
63 simple-audio-card,dai-link@0 {
69 sound-dai = <&sti_uni_player0>;
73 sound-dai = <&sti_hdmi>;
78 miphy28lp_phy: miphy28lp {
80 phy_port1: port@9b2a000 {
94 /* Low speed expansion connector */
95 uart0: serial@9830000 {
97 pinctrl-names = "default", "no-hw-flowctrl";
98 pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
99 pinctrl-1 = <&pinctrl_serial0>;
100 rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
105 /* Low speed expansion connector */
106 uart1: serial@9831000 {
111 /* Low speed expansion connector */
114 cs-gpios = <&pio30 3 0>;
118 /* Low speed expansion connector */
124 /* Low speed expansion connector */
130 /* high speed expansion connector */
133 pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
137 /* high speed expansion connector */
140 pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
144 mmc0: sdhci@9060000 {
145 pinctrl-0 = <&pinctrl_sd0>;
150 /* high speed expansion connector */
151 mmc1: sdhci@9080000 {
179 st_dwc3: dwc3@8f94000 {
183 ethernet0: dwmac@9630000 {
185 pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
187 snps,reset-gpio = <&pio0 7 0>;
188 snps,reset-active-low;
189 snps,reset-delays-us = <0 10000 1000000>;
194 sti_uni_player0: sti-uni-player@8d80000 {
198 hdmiddc: i2c@9541000 {
199 /* HDMI V1.3a supports Standard mode only */
200 clock-frequency = <100000>;
201 st,i2c-min-scl-pulse-width-us = <0>;
202 st,i2c-min-sda-pulse-width-us = <5>;
206 sata1: sata@9b28000 {