1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2012 ST-Ericsson AB
6 #include <dt-bindings/interrupt-controller/irq.h>
7 #include <dt-bindings/leds/common.h>
8 #include "ste-href-family-pinctrl.dtsi"
12 device_type = "memory";
13 reg = <0x00000000 0x20000000>;
17 compatible = "simple-battery";
18 battery-type = "lithium-ion-polymer";
23 /* This zone will be polled by the battery temperature code */
25 polling-delay-passive = <0>;
26 thermal-sensors = <&bat_therm>;
30 temperature = <70000>;
38 bat_therm: thermistor {
39 compatible = "murata,ncp18wb473";
40 io-channels = <&gpadc 0x02>; /* BatTemp */
41 pullup-uv = <1800000>;
42 pullup-ohm = <230000>;
44 #thermal-sensor-cells = <0>;
49 pinctrl-names = "default", "sleep";
50 pinctrl-0 = <&u0_a_1_default>;
51 pinctrl-1 = <&u0_a_1_sleep>;
55 /* This UART is unused and thus left disabled */
57 pinctrl-names = "default", "sleep";
58 pinctrl-0 = <&u1rxtx_a_1_default>;
59 pinctrl-1 = <&u1rxtx_a_1_sleep>;
63 pinctrl-names = "default", "sleep";
64 pinctrl-0 = <&u2rxtx_c_1_default>;
65 pinctrl-1 = <&u2rxtx_c_1_sleep>;
70 pinctrl-names = "default","sleep";
71 pinctrl-0 = <&i2c0_a_1_default>;
72 pinctrl-1 = <&i2c0_a_1_sleep>;
77 pinctrl-names = "default","sleep";
78 pinctrl-0 = <&i2c1_b_2_default>;
79 pinctrl-1 = <&i2c1_b_2_sleep>;
84 pinctrl-names = "default","sleep";
85 pinctrl-0 = <&i2c2_b_2_default>;
86 pinctrl-1 = <&i2c2_b_2_sleep>;
89 compatible = "national,lp5521";
92 clock-mode = /bits/ 8 <2>;
97 led-cur = /bits/ 8 <0x2f>;
98 max-cur = /bits/ 8 <0x5f>;
99 color = <LED_COLOR_ID_BLUE>;
100 linux,default-trigger = "heartbeat";
104 led-cur = /bits/ 8 <0x2f>;
105 max-cur = /bits/ 8 <0x5f>;
106 color = <LED_COLOR_ID_BLUE>;
110 led-cur = /bits/ 8 <0x2f>;
111 max-cur = /bits/ 8 <0x5f>;
112 color = <LED_COLOR_ID_BLUE>;
116 compatible = "national,lp5521";
118 label = "lp5521_sec";
119 clock-mode = /bits/ 8 <2>;
120 #address-cells = <1>;
124 led-cur = /bits/ 8 <0x2f>;
125 max-cur = /bits/ 8 <0x5f>;
126 color = <LED_COLOR_ID_BLUE>;
130 led-cur = /bits/ 8 <0x2f>;
131 max-cur = /bits/ 8 <0x5f>;
132 color = <LED_COLOR_ID_BLUE>;
136 led-cur = /bits/ 8 <0x2f>;
137 max-cur = /bits/ 8 <0x5f>;
138 color = <LED_COLOR_ID_BLUE>;
142 compatible = "rohm,bh1780gli";
148 pinctrl-names = "default","sleep";
149 pinctrl-0 = <&i2c3_c_2_default>;
150 pinctrl-1 = <&i2c3_c_2_sleep>;
154 // External Micro SD slot
156 arm,primecell-periphid = <0x10480180>;
157 max-frequency = <100000000>;
168 vmmc-supply = <&ab8500_ldo_aux3_reg>;
169 vqmmc-supply = <&vmmci>;
170 pinctrl-names = "default", "sleep";
171 pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
172 pinctrl-1 = <&mc0_a_1_sleep>;
179 arm,primecell-periphid = <0x10480180>;
180 max-frequency = <100000000>;
183 pinctrl-names = "default", "sleep";
184 pinctrl-0 = <&mc1_a_1_default>;
185 pinctrl-1 = <&mc1_a_1_sleep>;
192 arm,primecell-periphid = <0x10480180>;
193 max-frequency = <100000000>;
199 vmmc-supply = <&db8500_vsmps2_reg>;
200 pinctrl-names = "default", "sleep";
201 pinctrl-0 = <&mc2_a_1_default>;
202 pinctrl-1 = <&mc2_a_1_sleep>;
209 arm,primecell-periphid = <0x10480180>;
210 max-frequency = <100000000>;
216 vmmc-supply = <&ab8500_ldo_aux2_reg>;
217 pinctrl-names = "default", "sleep";
218 pinctrl-0 = <&mc4_a_1_default>;
219 pinctrl-1 = <&mc4_a_1_sleep>;
225 pinctrl-names = "default";
226 pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
231 pinctrl-names = "default";
232 pinctrl-0 = <&msp1txrx_a_1_default>;
237 pinctrl-names = "default";
238 pinctrl-0 = <&msp2_a_1_default>;
251 pinctrl-names = "default", "sleep";
252 pinctrl-0 = <&usb_a_1_default>;
253 pinctrl-1 = <&usb_a_1_sleep>;
257 ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
258 regulator-name = "V-DISPLAY";
261 ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
262 regulator-name = "V-eMMC1";
265 ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
266 regulator-name = "V-MMC-SD";
269 ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
270 regulator-name = "V-INTCORE";
273 ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
274 regulator-name = "V-TVOUT";
277 ab8500_ldo_audio_reg: ab8500_ldo_audio {
278 regulator-name = "V-AUD";
281 ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
282 regulator-name = "V-AMIC1";
285 ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
286 regulator-name = "V-AMIC2";
289 ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
290 regulator-name = "V-DMIC";
293 ab8500_ldo_ana_reg: ab8500_ldo_ana {
294 regulator-name = "V-CSI/DSI";
302 sdi0_default_mode: sdi0_default {
303 /* Some boards set additional settings here */
309 pinctrl-names = "default", "sleep";
310 pinctrl-0 = <&lcd_default_mode>;
311 pinctrl-1 = <&lcd_sleep_mode>;