arch/arm/boot/dts/sama7g5.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
   4  *
   5  *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
   6  *
   7  *  Author: Eugen Hristev <eugen.hristev@microchip.com>
   8  *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
   9  *
  10  */
  11
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13 #include <dt-bindings/interrupt-controller/arm-gic.h>
  14 #include <dt-bindings/clock/at91.h>
  15 #include <dt-bindings/dma/at91.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17
  18 / {
  19         model = "Microchip SAMA7G5 family SoC";
  20         compatible = "microchip,sama7g5";
  21         #address-cells = <1>;
  22         #size-cells = <1>;
  23         interrupt-parent = <&gic>;
  24
  25         cpus {
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28
  29                 cpu0: cpu@0 {
  30                         device_type = "cpu";
  31                         compatible = "arm,cortex-a7";
  32                         reg = <0x0>;
  33                         clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
  34                         clock-names = "cpu";
  35                         operating-points-v2 = <&cpu_opp_table>;
  36                 };
  37         };
  38
  39         cpu_opp_table: opp-table {
  40                 compatible = "operating-points-v2";
  41
  42                 opp-90000000 {
  43                         opp-hz = /bits/ 64 <90000000>;
  44                         opp-microvolt = <1050000 1050000 1225000>;
  45                         clock-latency-ns = <320000>;
  46                 };
  47
  48                 opp-250000000 {
  49                         opp-hz = /bits/ 64 <250000000>;
  50                         opp-microvolt = <1050000 1050000 1225000>;
  51                         clock-latency-ns = <320000>;
  52                 };
  53
  54                 opp-600000000 {
  55                         opp-hz = /bits/ 64 <600000000>;
  56                         opp-microvolt = <1050000 1050000 1225000>;
  57                         clock-latency-ns = <320000>;
  58                         opp-suspend;
  59                 };
  60
  61                 opp-800000000 {
  62                         opp-hz = /bits/ 64 <800000000>;
  63                         opp-microvolt = <1150000 1125000 1225000>;
  64                         clock-latency-ns = <320000>;
  65                 };
  66
  67                 opp-1000000002 {
  68                         opp-hz = /bits/ 64 <1000000002>;
  69                         opp-microvolt = <1250000 1225000 1300000>;
  70                         clock-latency-ns = <320000>;
  71                 };
  72         };
  73
  74         clocks {
  75                 slow_xtal: slow_xtal {
  76                         compatible = "fixed-clock";
  77                         #clock-cells = <0>;
  78                 };
  79
  80                 main_xtal: main_xtal {
  81                         compatible = "fixed-clock";
  82                         #clock-cells = <0>;
  83                 };
  84
  85                 usb_clk: usb_clk {
  86                         compatible = "fixed-clock";
  87                         #clock-cells = <0>;
  88                         clock-frequency = <48000000>;
  89                 };
  90         };
  91
  92         vddout25: fixed-regulator-vddout25 {
  93                 compatible = "regulator-fixed";
  94
  95                 regulator-name = "VDDOUT25";
  96                 regulator-min-microvolt = <2500000>;
  97                 regulator-max-microvolt = <2500000>;
  98                 regulator-boot-on;
  99                 status = "disabled";
 100         };
 101
 102         ns_sram: sram@100000 {
 103                 compatible = "mmio-sram";
 104                 #address-cells = <1>;
 105                 #size-cells = <1>;
 106                 reg = <0x100000 0x20000>;
 107                 ranges;
 108         };
 109
 110         soc {
 111                 compatible = "simple-bus";
 112                 #address-cells = <1>;
 113                 #size-cells = <1>;
 114                 ranges;
 115
 116                 nfc_sram: sram@600000 {
 117                         compatible = "mmio-sram";
 118                         no-memory-wc;
 119                         reg = <0x00600000 0x2400>;
 120                         #address-cells = <1>;
 121                         #size-cells = <1>;
 122                         ranges = <0 0x00600000 0x2400>;
 123                 };
 124
 125                 nfc_io: nfc-io@10000000 {
 126                         compatible = "atmel,sama5d3-nfc-io", "syscon";
 127                         reg = <0x10000000 0x8000000>;
 128                 };
 129
 130                 ebi: ebi@40000000 {
 131                         compatible = "atmel,sama5d3-ebi";
 132                         #address-cells = <2>;
 133                         #size-cells = <1>;
 134                         atmel,smc = <&hsmc>;
 135                         reg = <0x40000000 0x20000000>;
 136                         ranges = <0x0 0x0 0x40000000 0x8000000
 137                                   0x1 0x0 0x48000000 0x8000000
 138                                   0x2 0x0 0x50000000 0x8000000
 139                                   0x3 0x0 0x58000000 0x8000000>;
 140                         clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
 141                         status = "disabled";
 142
 143                         nand_controller: nand-controller {
 144                                 compatible = "atmel,sama5d3-nand-controller";
 145                                 atmel,nfc-sram = <&nfc_sram>;
 146                                 atmel,nfc-io = <&nfc_io>;
 147                                 ecc-engine = <&pmecc>;
 148                                 #address-cells = <2>;
 149                                 #size-cells = <1>;
 150                                 ranges;
 151                                 status = "disabled";
 152                         };
 153                 };
 154
 155                 securam: securam@e0000000 {
 156                         compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
 157                         reg = <0xe0000000 0x4000>;
 158                         clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 159                         #address-cells = <1>;
 160                         #size-cells = <1>;
 161                         ranges = <0 0xe0000000 0x4000>;
 162                         no-memory-wc;
 163                 };
 164
 165                 secumod: secumod@e0004000 {
 166                         compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
 167                         reg = <0xe0004000 0x4000>;
 168                         gpio-controller;
 169                         #gpio-cells = <2>;
 170                 };
 171
 172                 sfrbu: sfr@e0008000 {
 173                         compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
 174                         reg = <0xe0008000 0x20>;
 175                 };
 176
 177                 pioA: pinctrl@e0014000 {
 178                         compatible = "microchip,sama7g5-pinctrl";
 179                         reg = <0xe0014000 0x800>;
 180                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 181                                 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 182                                 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 183                                 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 184                                 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 185                         interrupt-controller;
 186                         #interrupt-cells = <2>;
 187                         gpio-controller;
 188                         #gpio-cells = <2>;
 189                         clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 190                 };
 191
 192                 pmc: pmc@e0018000 {
 193                         compatible = "microchip,sama7g5-pmc", "syscon";
 194                         reg = <0xe0018000 0x200>;
 195                         interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 196                         #clock-cells = <2>;
 197                         clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
 198                         clock-names = "td_slck", "md_slck", "main_xtal";
 199                 };
 200
 201                 shdwc: shdwc@e001d010 {
 202                         compatible = "microchip,sama7g5-shdwc", "syscon";
 203                         reg = <0xe001d010 0x10>;
 204                         clocks = <&clk32k 0>;
 205                         #address-cells = <1>;
 206                         #size-cells = <0>;
 207                         atmel,wakeup-rtc-timer;
 208                         atmel,wakeup-rtt-timer;
 209                         status = "disabled";
 210                 };
 211
 212                 rtt: rtc@e001d020 {
 213                         compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 214                         reg = <0xe001d020 0x30>;
 215                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 216                         clocks = <&clk32k 0>;
 217                 };
 218
 219                 clk32k: clock-controller@e001d050 {
 220                         compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
 221                         reg = <0xe001d050 0x4>;
 222                         clocks = <&slow_xtal>;
 223                         #clock-cells = <1>;
 224                 };
 225
 226                 gpbr: gpbr@e001d060 {
 227                         compatible = "microchip,sama7g5-gpbr", "syscon";
 228                         reg = <0xe001d060 0x48>;
 229                 };
 230
 231                 rtc: rtc@e001d0a8 {
 232                         compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
 233                         reg = <0xe001d0a8 0x30>;
 234                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 235                         clocks = <&clk32k 1>;
 236                 };
 237
 238                 ps_wdt: watchdog@e001d180 {
 239                         compatible = "microchip,sama7g5-wdt";
 240                         reg = <0xe001d180 0x24>;
 241                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 242                         clocks = <&clk32k 0>;
 243                 };
 244
 245                 chipid@e0020000 {
 246                         compatible = "microchip,sama7g5-chipid";
 247                         reg = <0xe0020000 0x8>;
 248                 };
 249
 250                 tcb1: timer@e0800000 {
 251                         compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
 252                         #address-cells = <1>;
 253                         #size-cells = <0>;
 254                         reg = <0xe0800000 0x100>;
 255                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 256                         clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
 257                         clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 258                 };
 259
 260                 hsmc: hsmc@e0808000 {
 261                         compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
 262                         reg = <0xe0808000 0x1000>;
 263                         interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 264                         clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 265                         #address-cells = <1>;
 266                         #size-cells = <1>;
 267                         ranges;
 268
 269                         pmecc: ecc-engine@e0808070 {
 270                                 compatible = "atmel,sama5d2-pmecc";
 271                                 reg = <0xe0808070 0x490>,
 272                                       <0xe0808500 0x200>;
 273                         };
 274                 };
 275
 276                 qspi0: spi@e080c000 {
 277                         compatible = "microchip,sama7g5-ospi";
 278                         reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
 279                         reg-names = "qspi_base", "qspi_mmap";
 280                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 281                         dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
 282                                <&dma0 AT91_XDMAC_DT_PERID(40)>;
 283                         dma-names = "tx", "rx";
 284                         clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
 285                         clock-names = "pclk", "gclk";
 286                         #address-cells = <1>;
 287                         #size-cells = <0>;
 288                         status = "disabled";
 289                 };
 290
 291                 qspi1: spi@e0810000 {
 292                         compatible = "microchip,sama7g5-qspi";
 293                         reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
 294                         reg-names = "qspi_base", "qspi_mmap";
 295                         interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 296                         dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
 297                                <&dma0 AT91_XDMAC_DT_PERID(42)>;
 298                         dma-names = "tx", "rx";
 299                         clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
 300                         clock-names = "pclk", "gclk";
 301                         #address-cells = <1>;
 302                         #size-cells = <0>;
 303                         status = "disabled";
 304                 };
 305
 306                 can0: can@e0828000 {
 307                         compatible = "bosch,m_can";
 308                         reg = <0xe0828000 0x100>, <0x100000 0x7800>;
 309                         reg-names = "m_can", "message_ram";
 310                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH
 311                                       GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 312                         interrupt-names = "int0", "int1";
 313                         clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
 314                         clock-names = "hclk", "cclk";
 315                         assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
 316                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
 317                         assigned-clock-rates = <40000000>;
 318                         bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
 319                         status = "disabled";
 320                 };
 321
 322                 can1: can@e082c000 {
 323                         compatible = "bosch,m_can";
 324                         reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
 325                         reg-names = "m_can", "message_ram";
 326                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH
 327                                       GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 328                         interrupt-names = "int0", "int1";
 329                         clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
 330                         clock-names = "hclk", "cclk";
 331                         assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
 332                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
 333                         assigned-clock-rates = <40000000>;
 334                         bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
 335                         status = "disabled";
 336                 };
 337
 338                 can2: can@e0830000 {
 339                         compatible = "bosch,m_can";
 340                         reg = <0xe0830000 0x100>, <0x100000 0x10000>;
 341                         reg-names = "m_can", "message_ram";
 342                         interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH
 343                                       GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 344                         interrupt-names = "int0", "int1";
 345                         clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
 346                         clock-names = "hclk", "cclk";
 347                         assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
 348                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
 349                         assigned-clock-rates = <40000000>;
 350                         bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
 351                         status = "disabled";
 352                 };
 353
 354                 can3: can@e0834000 {
 355                         compatible = "bosch,m_can";
 356                         reg = <0xe0834000 0x100>, <0x110000 0x4400>;
 357                         reg-names = "m_can", "message_ram";
 358                         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH
 359                                       GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 360                         interrupt-names = "int0", "int1";
 361                         clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
 362                         clock-names = "hclk", "cclk";
 363                         assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
 364                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
 365                         assigned-clock-rates = <40000000>;
 366                         bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
 367                         status = "disabled";
 368                 };
 369
 370                 can4: can@e0838000 {
 371                         compatible = "bosch,m_can";
 372                         reg = <0xe0838000 0x100>, <0x110000 0x8800>;
 373                         reg-names = "m_can", "message_ram";
 374                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH
 375                                       GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 376                         interrupt-names = "int0", "int1";
 377                         clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
 378                         clock-names = "hclk", "cclk";
 379                         assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
 380                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
 381                         assigned-clock-rates = <40000000>;
 382                         bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
 383                         status = "disabled";
 384                 };
 385
 386                 can5: can@e083c000 {
 387                         compatible = "bosch,m_can";
 388                         reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
 389                         reg-names = "m_can", "message_ram";
 390                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH
 391                                       GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 392                         interrupt-names = "int0", "int1";
 393                         clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
 394                         clock-names = "hclk", "cclk";
 395                         assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
 396                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
 397                         assigned-clock-rates = <40000000>;
 398                         bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
 399                         status = "disabled";
 400                 };
 401
 402                 adc: adc@e1000000 {
 403                         compatible = "microchip,sama7g5-adc";
 404                         reg = <0xe1000000 0x200>;
 405                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 406                         clocks = <&pmc PMC_TYPE_GCK 26>;
 407                         assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
 408                         assigned-clock-rates = <100000000>;
 409                         clock-names = "adc_clk";
 410                         dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
 411                         dma-names = "rx";
 412                         atmel,min-sample-rate-hz = <200000>;
 413                         atmel,max-sample-rate-hz = <20000000>;
 414                         atmel,startup-time-ms = <4>;
 415                         status = "disabled";
 416                 };
 417
 418                 sdmmc0: mmc@e1204000 {
 419                         compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
 420                         reg = <0xe1204000 0x4000>;
 421                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 422                         clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
 423                         clock-names = "hclock", "multclk";
 424                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
 425                         assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
 426                         assigned-clock-rates = <200000000>;
 427                         microchip,sdcal-inverted;
 428                         status = "disabled";
 429                 };
 430
 431                 sdmmc1: mmc@e1208000 {
 432                         compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
 433                         reg = <0xe1208000 0x4000>;
 434                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 435                         clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
 436                         clock-names = "hclock", "multclk";
 437                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
 438                         assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
 439                         assigned-clock-rates = <200000000>;
 440                         microchip,sdcal-inverted;
 441                         status = "disabled";
 442                 };
 443
 444                 sdmmc2: mmc@e120c000 {
 445                         compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
 446                         reg = <0xe120c000 0x4000>;
 447                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 448                         clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
 449                         clock-names = "hclock", "multclk";
 450                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
 451                         assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
 452                         assigned-clock-rates = <200000000>;
 453                         microchip,sdcal-inverted;
 454                         status = "disabled";
 455                 };
 456
 457                 pwm: pwm@e1604000 {
 458                         compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
 459                         reg = <0xe1604000 0x4000>;
 460                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 461                         #pwm-cells = <3>;
 462                         clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
 463                         status = "disabled";
 464                 };
 465
 466                 pdmc0: sound@e1608000 {
 467                         compatible = "microchip,sama7g5-pdmc";
 468                         reg = <0xe1608000 0x1000>;
 469                         interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 470                         #sound-dai-cells = <0>;
 471                         dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
 472                         dma-names = "rx";
 473                         clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
 474                         clock-names = "pclk", "gclk";
 475                         status = "disabled";
 476                 };
 477
 478                 pdmc1: sound@e160c000 {
 479                         compatible = "microchip,sama7g5-pdmc";
 480                         reg = <0xe160c000 0x1000>;
 481                         interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 482                         #sound-dai-cells = <0>;
 483                         dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>;
 484                         dma-names = "rx";
 485                         clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>;
 486                         clock-names = "pclk", "gclk";
 487                         status = "disabled";
 488                 };
 489
 490                 spdifrx: spdifrx@e1614000 {
 491                         #sound-dai-cells = <0>;
 492                         compatible = "microchip,sama7g5-spdifrx";
 493                         reg = <0xe1614000 0x4000>;
 494                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 495                         dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
 496                         dma-names = "rx";
 497                         clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
 498                         clock-names = "pclk", "gclk";
 499                         status = "disabled";
 500                 };
 501
 502                 spdiftx: spdiftx@e1618000 {
 503                         #sound-dai-cells = <0>;
 504                         compatible = "microchip,sama7g5-spdiftx";
 505                         reg = <0xe1618000 0x4000>;
 506                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 507                         dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
 508                         dma-names = "tx";
 509                         clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
 510                         clock-names = "pclk", "gclk";
 511                 };
 512
 513                 i2s0: i2s@e161c000 {
 514                         compatible = "microchip,sama7g5-i2smcc";
 515                         #sound-dai-cells = <0>;
 516                         reg = <0xe161c000 0x4000>;
 517                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 518                         dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
 519                         dma-names = "tx", "rx";
 520                         clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
 521                         clock-names = "pclk", "gclk";
 522                         status = "disabled";
 523                 };
 524
 525                 i2s1: i2s@e1620000 {
 526                         compatible = "microchip,sama7g5-i2smcc";
 527                         #sound-dai-cells = <0>;
 528                         reg = <0xe1620000 0x4000>;
 529                         interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 530                         dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
 531                         dma-names = "tx", "rx";
 532                         clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
 533                         clock-names = "pclk", "gclk";
 534                         status = "disabled";
 535                 };
 536
 537                 eic: interrupt-controller@e1628000 {
 538                         compatible = "microchip,sama7g5-eic";
 539                         reg = <0xe1628000 0xec>;
 540                         interrupt-parent = <&gic>;
 541                         interrupt-controller;
 542                         #interrupt-cells = <2>;
 543                         interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 544                                      <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 545                         clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
 546                         clock-names = "pclk";
 547                         status = "disabled";
 548                 };
 549
 550                 pit64b0: timer@e1800000 {
 551                         compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
 552                         reg = <0xe1800000 0x4000>;
 553                         interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 554                         clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
 555                         clock-names = "pclk", "gclk";
 556                 };
 557
 558                 pit64b1: timer@e1804000 {
 559                         compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
 560                         reg = <0xe1804000 0x4000>;
 561                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 562                         clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
 563                         clock-names = "pclk", "gclk";
 564                 };
 565
 566                 aes: crypto@e1810000 {
 567                         compatible = "atmel,at91sam9g46-aes";
 568                         reg = <0xe1810000 0x100>;
 569                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 570                         clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
 571                         clock-names = "aes_clk";
 572                         dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
 573                                <&dma0 AT91_XDMAC_DT_PERID(2)>;
 574                         dma-names = "tx", "rx";
 575                 };
 576
 577                 sha: crypto@e1814000 {
 578                         compatible = "atmel,at91sam9g46-sha";
 579                         reg = <0xe1814000 0x100>;
 580                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 581                         clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
 582                         clock-names = "sha_clk";
 583                         dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
 584                         dma-names = "tx";
 585                 };
 586
 587                 flx0: flexcom@e1818000 {
 588                         compatible = "atmel,sama5d2-flexcom";
 589                         reg = <0xe1818000 0x200>;
 590                         clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 591                         #address-cells = <1>;
 592                         #size-cells = <1>;
 593                         ranges = <0x0 0xe1818000 0x800>;
 594                         status = "disabled";
 595
 596                         uart0: serial@200 {
 597                                 compatible = "atmel,at91sam9260-usart";
 598                                 reg = <0x200 0x200>;
 599                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 600                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 601                                 clock-names = "usart";
 602                                 dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
 603                                         <&dma1 AT91_XDMAC_DT_PERID(5)>;
 604                                 dma-names = "tx", "rx";
 605                                 atmel,use-dma-rx;
 606                                 atmel,use-dma-tx;
 607                                 status = "disabled";
 608                         };
 609                 };
 610
 611                 flx1: flexcom@e181c000 {
 612                         compatible = "atmel,sama5d2-flexcom";
 613                         reg = <0xe181c000 0x200>;
 614                         clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 615                         #address-cells = <1>;
 616                         #size-cells = <1>;
 617                         ranges = <0x0 0xe181c000 0x800>;
 618                         status = "disabled";
 619
 620                         i2c1: i2c@600 {
 621                                 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
 622                                 reg = <0x600 0x200>;
 623                                 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 624                                 #address-cells = <1>;
 625                                 #size-cells = <0>;
 626                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 627                                 atmel,fifo-size = <32>;
 628                                 dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
 629                                         <&dma0 AT91_XDMAC_DT_PERID(7)>;
 630                                 dma-names = "tx", "rx";
 631                                 status = "disabled";
 632                         };
 633                 };
 634
 635                 flx3: flexcom@e1824000 {
 636                         compatible = "atmel,sama5d2-flexcom";
 637                         reg = <0xe1824000 0x200>;
 638                         clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 639                         #address-cells = <1>;
 640                         #size-cells = <1>;
 641                         ranges = <0x0 0xe1824000 0x800>;
 642                         status = "disabled";
 643
 644                         uart3: serial@200 {
 645                                 compatible = "atmel,at91sam9260-usart";
 646                                 reg = <0x200 0x200>;
 647                                 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 648                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 649                                 clock-names = "usart";
 650                                 dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
 651                                         <&dma1 AT91_XDMAC_DT_PERID(11)>;
 652                                 dma-names = "tx", "rx";
 653                                 atmel,use-dma-rx;
 654                                 atmel,use-dma-tx;
 655                                 status = "disabled";
 656                         };
 657                 };
 658
 659                 trng: rng@e2010000 {
 660                         compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
 661                         reg = <0xe2010000 0x100>;
 662                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 663                         clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
 664                         status = "disabled";
 665                 };
 666
 667                 tdes: crypto@e2014000 {
 668                         compatible = "atmel,at91sam9g46-tdes";
 669                         reg = <0xe2014000 0x100>;
 670                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 671                         clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
 672                         clock-names = "tdes_clk";
 673                         dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
 674                                <&dma0 AT91_XDMAC_DT_PERID(53)>;
 675                         dma-names = "tx", "rx";
 676                 };
 677
 678                 flx4: flexcom@e2018000 {
 679                         compatible = "atmel,sama5d2-flexcom";
 680                         reg = <0xe2018000 0x200>;
 681                         clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 682                         #address-cells = <1>;
 683                         #size-cells = <1>;
 684                         ranges = <0x0 0xe2018000 0x800>;
 685                         status = "disabled";
 686
 687                         uart4: serial@200 {
 688                                 compatible = "atmel,at91sam9260-usart";
 689                                 reg = <0x200 0x200>;
 690                                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 691                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 692                                 clock-names = "usart";
 693                                 dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
 694                                         <&dma1 AT91_XDMAC_DT_PERID(13)>;
 695                                 dma-names = "tx", "rx";
 696                                 atmel,use-dma-rx;
 697                                 atmel,use-dma-tx;
 698                                 atmel,fifo-size = <16>;
 699                                 status = "disabled";
 700                         };
 701                 };
 702
 703                 flx7: flexcom@e2024000 {
 704                         compatible = "atmel,sama5d2-flexcom";
 705                         reg = <0xe2024000 0x200>;
 706                         clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 707                         #address-cells = <1>;
 708                         #size-cells = <1>;
 709                         ranges = <0x0 0xe2024000 0x800>;
 710                         status = "disabled";
 711
 712                         uart7: serial@200 {
 713                                 compatible = "atmel,at91sam9260-usart";
 714                                 reg = <0x200 0x200>;
 715                                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 716                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 717                                 clock-names = "usart";
 718                                 dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
 719                                         <&dma1 AT91_XDMAC_DT_PERID(19)>;
 720                                 dma-names = "tx", "rx";
 721                                 atmel,use-dma-rx;
 722                                 atmel,use-dma-tx;
 723                                 atmel,fifo-size = <16>;
 724                                 status = "disabled";
 725                         };
 726                 };
 727
 728                 gmac0: ethernet@e2800000 {
 729                         compatible = "microchip,sama7g5-gem";
 730                         reg = <0xe2800000 0x1000>;
 731                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
 732                                       GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
 733                                       GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
 734                                       GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
 735                                       GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
 736                                       GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 737                         clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
 738                         clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
 739                         assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
 740                         assigned-clock-rates = <125000000>;
 741                         status = "disabled";
 742                 };
 743
 744                 gmac1: ethernet@e2804000 {
 745                         compatible = "microchip,sama7g5-emac";
 746                         reg = <0xe2804000 0x1000>;
 747                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
 748                                       GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 749                         clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
 750                         clock-names = "pclk", "hclk";
 751                         status = "disabled";
 752                 };
 753
 754                 dma0: dma-controller@e2808000 {
 755                         compatible = "microchip,sama7g5-dma";
 756                         reg = <0xe2808000 0x1000>;
 757                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 758                         #dma-cells = <1>;
 759                         clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
 760                         clock-names = "dma_clk";
 761                         status = "disabled";
 762                 };
 763
 764                 dma1: dma-controller@e280c000 {
 765                         compatible = "microchip,sama7g5-dma";
 766                         reg = <0xe280c000 0x1000>;
 767                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 768                         #dma-cells = <1>;
 769                         clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 770                         clock-names = "dma_clk";
 771                         status = "disabled";
 772                 };
 773
 774                 /* Place dma2 here despite it's address */
 775                 dma2: dma-controller@e1200000 {
 776                         compatible = "microchip,sama7g5-dma";
 777                         reg = <0xe1200000 0x1000>;
 778                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 779                         #dma-cells = <1>;
 780                         clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
 781                         clock-names = "dma_clk";
 782                         dma-requests = <0>;
 783                         status = "disabled";
 784                 };
 785
 786                 tcb0: timer@e2814000 {
 787                         compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
 788                         #address-cells = <1>;
 789                         #size-cells = <0>;
 790                         reg = <0xe2814000 0x100>;
 791                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 792                         clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
 793                         clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 794                 };
 795
 796                 flx8: flexcom@e2818000 {
 797                         compatible = "atmel,sama5d2-flexcom";
 798                         reg = <0xe2818000 0x200>;
 799                         clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 800                         #address-cells = <1>;
 801                         #size-cells = <1>;
 802                         ranges = <0x0 0xe2818000 0x800>;
 803                         status = "disabled";
 804
 805                         i2c8: i2c@600 {
 806                                 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
 807                                 reg = <0x600 0x200>;
 808                                 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 809                                 #address-cells = <1>;
 810                                 #size-cells = <0>;
 811                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 812                                 atmel,fifo-size = <32>;
 813                                 dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
 814                                         <&dma0 AT91_XDMAC_DT_PERID(21)>;
 815                                 dma-names = "tx", "rx";
 816                                 status = "disabled";
 817                         };
 818                 };
 819
 820                 flx9: flexcom@e281c000 {
 821                         compatible = "atmel,sama5d2-flexcom";
 822                         reg = <0xe281c000 0x200>;
 823                         clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 824                         #address-cells = <1>;
 825                         #size-cells = <1>;
 826                         ranges = <0x0 0xe281c000 0x800>;
 827                         status = "disabled";
 828
 829                         i2c9: i2c@600 {
 830                                 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
 831                                 reg = <0x600 0x200>;
 832                                 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 833                                 #address-cells = <1>;
 834                                 #size-cells = <0>;
 835                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 836                                 atmel,fifo-size = <32>;
 837                                 dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
 838                                         <&dma0 AT91_XDMAC_DT_PERID(23)>;
 839                                 dma-names = "tx", "rx";
 840                                 status = "disabled";
 841                         };
 842                 };
 843
 844                 flx11: flexcom@e2824000 {
 845                         compatible = "atmel,sama5d2-flexcom";
 846                         reg = <0xe2824000 0x200>;
 847                         clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
 848                         #address-cells = <1>;
 849                         #size-cells = <1>;
 850                         ranges = <0x0 0xe2824000 0x800>;
 851                         status = "disabled";
 852
 853                         spi11: spi@400 {
 854                                 compatible = "atmel,at91rm9200-spi";
 855                                 reg = <0x400 0x200>;
 856                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 857                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
 858                                 clock-names = "spi_clk";
 859                                 #address-cells = <1>;
 860                                 #size-cells = <0>;
 861                                 atmel,fifo-size = <32>;
 862                                 dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>,
 863                                             <&dma0 AT91_XDMAC_DT_PERID(28)>;
 864                                 dma-names = "rx", "tx";
 865                                 status = "disabled";
 866                         };
 867                 };
 868
 869                 uddrc: uddrc@e3800000 {
 870                         compatible = "microchip,sama7g5-uddrc";
 871                         reg = <0xe3800000 0x4000>;
 872                 };
 873
 874                 ddr3phy: ddr3phy@e3804000 {
 875                         compatible = "microchip,sama7g5-ddr3phy";
 876                         reg = <0xe3804000 0x1000>;
 877                 };
 878
 879                 gic: interrupt-controller@e8c11000 {
 880                         compatible = "arm,cortex-a7-gic";
 881                         #interrupt-cells = <3>;
 882                         #address-cells = <0>;
 883                         interrupt-controller;
 884                         reg = <0xe8c11000 0x1000>,
 885                                 <0xe8c12000 0x2000>;
 886                 };
 887         };
 888 };