arch/arm/boot/dts/sama5d3.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
   4  *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
   5  *
   6  *  Copyright (C) 2013 Atmel,
   7  *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
   8  */
   9
  10 #include <dt-bindings/dma/at91.h>
  11 #include <dt-bindings/pinctrl/at91.h>
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13 #include <dt-bindings/gpio/gpio.h>
  14 #include <dt-bindings/clock/at91.h>
  15 #include <dt-bindings/mfd/at91-usart.h>
  16
  17 / {
  18         #address-cells = <1>;
  19         #size-cells = <1>;
  20         model = "Atmel SAMA5D3 family SoC";
  21         compatible = "atmel,sama5d3", "atmel,sama5";
  22         interrupt-parent = <&aic>;
  23
  24         aliases {
  25                 serial0 = &dbgu;
  26                 serial1 = &usart0;
  27                 serial2 = &usart1;
  28                 serial3 = &usart2;
  29                 serial4 = &usart3;
  30                 serial5 = &uart0;
  31                 gpio0 = &pioA;
  32                 gpio1 = &pioB;
  33                 gpio2 = &pioC;
  34                 gpio3 = &pioD;
  35                 gpio4 = &pioE;
  36                 tcb0 = &tcb0;
  37                 i2c0 = &i2c0;
  38                 i2c1 = &i2c1;
  39                 i2c2 = &i2c2;
  40                 ssc0 = &ssc0;
  41                 ssc1 = &ssc1;
  42                 pwm0 = &pwm0;
  43         };
  44         cpus {
  45                 #address-cells = <1>;
  46                 #size-cells = <0>;
  47                 cpu@0 {
  48                         device_type = "cpu";
  49                         compatible = "arm,cortex-a5";
  50                         reg = <0x0>;
  51                 };
  52         };
  53
  54         pmu {
  55                 compatible = "arm,cortex-a5-pmu";
  56                 interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
  57         };
  58
  59         memory@20000000 {
  60                 device_type = "memory";
  61                 reg = <0x20000000 0x8000000>;
  62         };
  63
  64         clocks {
  65                 slow_xtal: slow_xtal {
  66                         compatible = "fixed-clock";
  67                         #clock-cells = <0>;
  68                         clock-frequency = <0>;
  69                 };
  70
  71                 main_xtal: main_xtal {
  72                         compatible = "fixed-clock";
  73                         #clock-cells = <0>;
  74                         clock-frequency = <0>;
  75                 };
  76
  77                 adc_op_clk: adc_op_clk{
  78                         compatible = "fixed-clock";
  79                         #clock-cells = <0>;
  80                         clock-frequency = <1000000>;
  81                 };
  82         };
  83
  84         sram: sram@300000 {
  85                 compatible = "mmio-sram";
  86                 reg = <0x00300000 0x20000>;
  87                 #address-cells = <1>;
  88                 #size-cells = <1>;
  89                 ranges = <0 0x00300000 0x20000>;
  90         };
  91
  92         ahb {
  93                 compatible = "simple-bus";
  94                 #address-cells = <1>;
  95                 #size-cells = <1>;
  96                 ranges;
  97
  98                 apb {
  99                         compatible = "simple-bus";
 100                         #address-cells = <1>;
 101                         #size-cells = <1>;
 102                         ranges;
 103
 104                         mmc0: mmc@f0000000 {
 105                                 compatible = "atmel,hsmci";
 106                                 reg = <0xf0000000 0x600>;
 107                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 108                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
 109                                 dma-names = "rxtx";
 110                                 pinctrl-names = "default";
 111                                 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
 112                                 status = "disabled";
 113                                 #address-cells = <1>;
 114                                 #size-cells = <0>;
 115                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 116                                 clock-names = "mci_clk";
 117                         };
 118
 119                         spi0: spi@f0004000 {
 120                                 #address-cells = <1>;
 121                                 #size-cells = <0>;
 122                                 compatible = "atmel,at91rm9200-spi";
 123                                 reg = <0xf0004000 0x100>;
 124                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 125                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
 126                                        <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
 127                                 dma-names = "tx", "rx";
 128                                 pinctrl-names = "default";
 129                                 pinctrl-0 = <&pinctrl_spi0>;
 130                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
 131                                 clock-names = "spi_clk";
 132                                 status = "disabled";
 133                         };
 134
 135                         ssc0: ssc@f0008000 {
 136                                 compatible = "atmel,at91sam9g45-ssc";
 137                                 reg = <0xf0008000 0x4000>;
 138                                 interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
 139                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
 140                                        <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
 141                                 dma-names = "tx", "rx";
 142                                 pinctrl-names = "default";
 143                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 144                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 145                                 clock-names = "pclk";
 146                                 status = "disabled";
 147                         };
 148
 149                         tcb0: timer@f0010000 {
 150                                 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
 151                                 #address-cells = <1>;
 152                                 #size-cells = <0>;
 153                                 reg = <0xf0010000 0x100>;
 154                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 155                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
 156                                 clock-names = "t0_clk", "slow_clk";
 157                         };
 158
 159                         i2c0: i2c@f0014000 {
 160                                 compatible = "atmel,at91sam9x5-i2c";
 161                                 reg = <0xf0014000 0x4000>;
 162                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
 163                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
 164                                        <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
 165                                 dma-names = "tx", "rx";
 166                                 pinctrl-names = "default", "gpio";
 167                                 pinctrl-0 = <&pinctrl_i2c0>;
 168                                 pinctrl-1 = <&pinctrl_i2c0_gpio>;
 169                                 sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
 170                                 scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 171                                 #address-cells = <1>;
 172                                 #size-cells = <0>;
 173                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 174                                 status = "disabled";
 175                         };
 176
 177                         i2c1: i2c@f0018000 {
 178                                 compatible = "atmel,at91sam9x5-i2c";
 179                                 reg = <0xf0018000 0x4000>;
 180                                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
 181                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
 182                                        <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
 183                                 dma-names = "tx", "rx";
 184                                 pinctrl-names = "default", "gpio";
 185                                 pinctrl-0 = <&pinctrl_i2c1>;
 186                                 pinctrl-1 = <&pinctrl_i2c1_gpio>;
 187                                 sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
 188                                 scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 189                                 #address-cells = <1>;
 190                                 #size-cells = <0>;
 191                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 192                                 status = "disabled";
 193                         };
 194
 195                         usart0: serial@f001c000 {
 196                                 compatible = "atmel,at91sam9260-usart";
 197                                 reg = <0xf001c000 0x100>;
 198                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 199                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
 200                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
 201                                        <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 202                                 dma-names = "tx", "rx";
 203                                 pinctrl-names = "default";
 204                                 pinctrl-0 = <&pinctrl_usart0>;
 205                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 206                                 clock-names = "usart";
 207                                 status = "disabled";
 208                         };
 209
 210                         usart1: serial@f0020000 {
 211                                 compatible = "atmel,at91sam9260-usart";
 212                                 reg = <0xf0020000 0x100>;
 213                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 214                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
 215                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
 216                                        <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 217                                 dma-names = "tx", "rx";
 218                                 pinctrl-names = "default";
 219                                 pinctrl-0 = <&pinctrl_usart1>;
 220                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 221                                 clock-names = "usart";
 222                                 status = "disabled";
 223                         };
 224
 225                         uart0: serial@f0024000 {
 226                                 compatible = "atmel,at91sam9260-usart";
 227                                 reg = <0xf0024000 0x100>;
 228                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 229                                 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 230                                 pinctrl-names = "default";
 231                                 pinctrl-0 = <&pinctrl_uart0>;
 232                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 233                                 clock-names = "usart";
 234                                 status = "disabled";
 235                         };
 236
 237                         pwm0: pwm@f002c000 {
 238                                 compatible = "atmel,sama5d3-pwm";
 239                                 reg = <0xf002c000 0x300>;
 240                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
 241                                 #pwm-cells = <3>;
 242                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 243                                 status = "disabled";
 244                         };
 245
 246                         isi: isi@f0034000 {
 247                                 compatible = "atmel,at91sam9g45-isi";
 248                                 reg = <0xf0034000 0x4000>;
 249                                 interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
 250                                 pinctrl-names = "default";
 251                                 pinctrl-0 = <&pinctrl_isi_data_0_7>;
 252                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
 253                                 clock-names = "isi_clk";
 254                                 status = "disabled";
 255                                 port {
 256                                         #address-cells = <1>;
 257                                         #size-cells = <0>;
 258                                 };
 259                         };
 260
 261                         sfr: sfr@f0038000 {
 262                                 compatible = "atmel,sama5d3-sfr", "syscon";
 263                                 reg = <0xf0038000 0x60>;
 264                         };
 265
 266                         mmc1: mmc@f8000000 {
 267                                 compatible = "atmel,hsmci";
 268                                 reg = <0xf8000000 0x600>;
 269                                 interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
 270                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
 271                                 dma-names = "rxtx";
 272                                 pinctrl-names = "default";
 273                                 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
 274                                 status = "disabled";
 275                                 #address-cells = <1>;
 276                                 #size-cells = <0>;
 277                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
 278                                 clock-names = "mci_clk";
 279                         };
 280
 281                         spi1: spi@f8008000 {
 282                                 #address-cells = <1>;
 283                                 #size-cells = <0>;
 284                                 compatible = "atmel,at91rm9200-spi";
 285                                 reg = <0xf8008000 0x100>;
 286                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
 287                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
 288                                        <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
 289                                 dma-names = "tx", "rx";
 290                                 pinctrl-names = "default";
 291                                 pinctrl-0 = <&pinctrl_spi1>;
 292                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
 293                                 clock-names = "spi_clk";
 294                                 status = "disabled";
 295                         };
 296
 297                         ssc1: ssc@f800c000 {
 298                                 compatible = "atmel,at91sam9g45-ssc";
 299                                 reg = <0xf800c000 0x4000>;
 300                                 interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
 301                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
 302                                        <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
 303                                 dma-names = "tx", "rx";
 304                                 pinctrl-names = "default";
 305                                 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 306                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 307                                 clock-names = "pclk";
 308                                 status = "disabled";
 309                         };
 310
 311                         adc0: adc@f8018000 {
 312                                 compatible = "atmel,sama5d3-adc";
 313                                 reg = <0xf8018000 0x100>;
 314                                 interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
 315                                 pinctrl-names = "default";
 316                                 pinctrl-0 = <
 317                                         &pinctrl_adc0_adtrg
 318                                         &pinctrl_adc0_ad0
 319                                         &pinctrl_adc0_ad1
 320                                         &pinctrl_adc0_ad2
 321                                         &pinctrl_adc0_ad3
 322                                         &pinctrl_adc0_ad4
 323                                         &pinctrl_adc0_ad5
 324                                         &pinctrl_adc0_ad6
 325                                         &pinctrl_adc0_ad7
 326                                         &pinctrl_adc0_ad8
 327                                         &pinctrl_adc0_ad9
 328                                         &pinctrl_adc0_ad10
 329                                         &pinctrl_adc0_ad11
 330                                         >;
 331                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
 332                                          <&adc_op_clk>;
 333                                 clock-names = "adc_clk", "adc_op_clk";
 334                                 atmel,adc-channels-used = <0xfff>;
 335                                 atmel,adc-startup-time = <40>;
 336                                 atmel,adc-use-external-triggers;
 337                                 atmel,adc-vref = <3000>;
 338                                 atmel,adc-sample-hold-time = <11>;
 339                                 status = "disabled";
 340                         };
 341
 342                         i2c2: i2c@f801c000 {
 343                                 compatible = "atmel,at91sam9x5-i2c";
 344                                 reg = <0xf801c000 0x4000>;
 345                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
 346                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
 347                                        <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
 348                                 dma-names = "tx", "rx";
 349                                 pinctrl-names = "default", "gpio";
 350                                 pinctrl-0 = <&pinctrl_i2c2>;
 351                                 pinctrl-1 = <&pinctrl_i2c2_gpio>;
 352                                 sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
 353                                 scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 354                                 #address-cells = <1>;
 355                                 #size-cells = <0>;
 356                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 357                                 status = "disabled";
 358                         };
 359
 360                         usart2: serial@f8020000 {
 361                                 compatible = "atmel,at91sam9260-usart";
 362                                 reg = <0xf8020000 0x100>;
 363                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 364                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 365                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
 366                                        <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 367                                 dma-names = "tx", "rx";
 368                                 pinctrl-names = "default";
 369                                 pinctrl-0 = <&pinctrl_usart2>;
 370                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 371                                 clock-names = "usart";
 372                                 status = "disabled";
 373                         };
 374
 375                         usart3: serial@f8024000 {
 376                                 compatible = "atmel,at91sam9260-usart";
 377                                 reg = <0xf8024000 0x100>;
 378                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 379                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 380                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
 381                                        <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 382                                 dma-names = "tx", "rx";
 383                                 pinctrl-names = "default";
 384                                 pinctrl-0 = <&pinctrl_usart3>;
 385                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 386                                 clock-names = "usart";
 387                                 status = "disabled";
 388                         };
 389
 390                         sha: crypto@f8034000 {
 391                                 compatible = "atmel,at91sam9g46-sha";
 392                                 reg = <0xf8034000 0x100>;
 393                                 interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
 394                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
 395                                 dma-names = "tx";
 396                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 397                                 clock-names = "sha_clk";
 398                         };
 399
 400                         aes: crypto@f8038000 {
 401                                 compatible = "atmel,at91sam9g46-aes";
 402                                 reg = <0xf8038000 0x100>;
 403                                 interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
 404                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
 405                                        <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
 406                                 dma-names = "tx", "rx";
 407                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
 408                                 clock-names = "aes_clk";
 409                         };
 410
 411                         tdes: crypto@f803c000 {
 412                                 compatible = "atmel,at91sam9g46-tdes";
 413                                 reg = <0xf803c000 0x100>;
 414                                 interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
 415                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
 416                                        <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
 417                                 dma-names = "tx", "rx";
 418                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
 419                                 clock-names = "tdes_clk";
 420                         };
 421
 422                         trng@f8040000 {
 423                                 compatible = "atmel,at91sam9g45-trng";
 424                                 reg = <0xf8040000 0x100>;
 425                                 interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
 426                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 427                         };
 428
 429                         hsmc: hsmc@ffffc000 {
 430                                 compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
 431                                 reg = <0xffffc000 0x1000>;
 432                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
 433                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 434                                 #address-cells = <1>;
 435                                 #size-cells = <1>;
 436                                 ranges;
 437
 438                                 pmecc: ecc-engine@ffffc070 {
 439                                         compatible = "atmel,at91sam9g45-pmecc";
 440                                         reg = <0xffffc070 0x490>,
 441                                               <0xffffc500 0x100>;
 442                                 };
 443                         };
 444
 445                         dma0: dma-controller@ffffe600 {
 446                                 compatible = "atmel,at91sam9g45-dma";
 447                                 reg = <0xffffe600 0x200>;
 448                                 interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
 449                                 #dma-cells = <2>;
 450                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
 451                                 clock-names = "dma_clk";
 452                         };
 453
 454                         dma1: dma-controller@ffffe800 {
 455                                 compatible = "atmel,at91sam9g45-dma";
 456                                 reg = <0xffffe800 0x200>;
 457                                 interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 458                                 #dma-cells = <2>;
 459                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
 460                                 clock-names = "dma_clk";
 461                         };
 462
 463                         ramc0: ramc@ffffea00 {
 464                                 compatible = "atmel,sama5d3-ddramc";
 465                                 reg = <0xffffea00 0x200>;
 466                                 clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
 467                                 clock-names = "ddrck", "mpddr";
 468                         };
 469
 470                         dbgu: serial@ffffee00 {
 471                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 472                                 reg = <0xffffee00 0x200>;
 473                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 474                                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 475                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
 476                                        <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 477                                 dma-names = "tx", "rx";
 478                                 pinctrl-names = "default";
 479                                 pinctrl-0 = <&pinctrl_dbgu>;
 480                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 481                                 clock-names = "usart";
 482                                 status = "disabled";
 483                         };
 484
 485                         aic: interrupt-controller@fffff000 {
 486                                 #interrupt-cells = <3>;
 487                                 compatible = "atmel,sama5d3-aic";
 488                                 interrupt-controller;
 489                                 reg = <0xfffff000 0x200>;
 490                                 atmel,external-irqs = <47>;
 491                         };
 492
 493                         pinctrl: pinctrl@fffff200 {
 494                                 #address-cells = <1>;
 495                                 #size-cells = <1>;
 496                                 compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
 497                                 ranges = <0xfffff200 0xfffff200 0xa00>;
 498                                 atmel,mux-mask = <
 499                                         /*   A          B          C  */
 500                                         0xffffffff 0xc0fc0000 0xc0ff0000        /* pioA */
 501                                         0xffffffff 0x0ff8ffff 0x00000000        /* pioB */
 502                                         0xffffffff 0xbc00f1ff 0x7c00fc00        /* pioC */
 503                                         0xffffffff 0xc001c0e0 0x0001c1e0        /* pioD */
 504                                         0xffffffff 0xbf9f8000 0x18000000        /* pioE */
 505                                         >;
 506
 507                                 /* shared pinctrl settings */
 508                                 adc0 {
 509                                         pinctrl_adc0_adtrg: adc0_adtrg {
 510                                                 atmel,pins =
 511                                                         <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */
 512                                         };
 513                                         pinctrl_adc0_ad0: adc0_ad0 {
 514                                                 atmel,pins =
 515                                                         <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */
 516                                         };
 517                                         pinctrl_adc0_ad1: adc0_ad1 {
 518                                                 atmel,pins =
 519                                                         <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */
 520                                         };
 521                                         pinctrl_adc0_ad2: adc0_ad2 {
 522                                                 atmel,pins =
 523                                                         <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */
 524                                         };
 525                                         pinctrl_adc0_ad3: adc0_ad3 {
 526                                                 atmel,pins =
 527                                                         <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */
 528                                         };
 529                                         pinctrl_adc0_ad4: adc0_ad4 {
 530                                                 atmel,pins =
 531                                                         <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */
 532                                         };
 533                                         pinctrl_adc0_ad5: adc0_ad5 {
 534                                                 atmel,pins =
 535                                                         <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */
 536                                         };
 537                                         pinctrl_adc0_ad6: adc0_ad6 {
 538                                                 atmel,pins =
 539                                                         <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */
 540                                         };
 541                                         pinctrl_adc0_ad7: adc0_ad7 {
 542                                                 atmel,pins =
 543                                                         <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */
 544                                         };
 545                                         pinctrl_adc0_ad8: adc0_ad8 {
 546                                                 atmel,pins =
 547                                                         <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */
 548                                         };
 549                                         pinctrl_adc0_ad9: adc0_ad9 {
 550                                                 atmel,pins =
 551                                                         <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */
 552                                         };
 553                                         pinctrl_adc0_ad10: adc0_ad10 {
 554                                                 atmel,pins =
 555                                                         <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */
 556                                         };
 557                                         pinctrl_adc0_ad11: adc0_ad11 {
 558                                                 atmel,pins =
 559                                                         <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */
 560                                         };
 561                                 };
 562
 563                                 dbgu {
 564                                         pinctrl_dbgu: dbgu-0 {
 565                                                 atmel,pins =
 566                                                         <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 567                                                          AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 568                                         };
 569                                 };
 570
 571                                 ebi {
 572                                         pinctrl_ebi_addr: ebi-addr-0 {
 573                                                 atmel,pins =
 574                                                         <AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
 575                                                          AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
 576                                                          AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
 577                                                          AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
 578                                                          AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
 579                                                          AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
 580                                                          AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
 581                                                          AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
 582                                                          AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
 583                                                          AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
 584                                                          AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
 585                                                          AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
 586                                                          AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
 587                                                          AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
 588                                                          AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
 589                                                          AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
 590                                                          AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
 591                                                          AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
 592                                                          AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
 593                                                          AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
 594                                                          AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
 595                                                          AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
 596                                                          AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 597                                         };
 598
 599                                         pinctrl_ebi_nand_addr: ebi-addr-1 {
 600                                                 atmel,pins =
 601                                                         <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
 602                                                          AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 603                                         };
 604
 605                                         pinctrl_ebi_cs0: ebi-cs0-0 {
 606                                                 atmel,pins =
 607                                                         <AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 608                                         };
 609
 610                                         pinctrl_ebi_cs1: ebi-cs1-0 {
 611                                                 atmel,pins =
 612                                                         <AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 613                                         };
 614
 615                                         pinctrl_ebi_cs2: ebi-cs2-0 {
 616                                                 atmel,pins =
 617                                                         <AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 618                                         };
 619
 620                                         pinctrl_ebi_nwait: ebi-nwait-0 {
 621                                                 atmel,pins =
 622                                                         <AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 623                                         };
 624
 625                                         pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
 626                                                 atmel,pins =
 627                                                         <AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 628                                         };
 629                                 };
 630
 631                                 i2c0 {
 632                                         pinctrl_i2c0: i2c0-0 {
 633                                                 atmel,pins =
 634                                                         <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
 635                                                          AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
 636                                         };
 637
 638                                         pinctrl_i2c0_gpio: i2c0-gpio {
 639                                                 atmel,pins =
 640                                                         <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
 641                                                          AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 642                                         };
 643                                 };
 644
 645                                 i2c1 {
 646                                         pinctrl_i2c1: i2c1-0 {
 647                                                 atmel,pins =
 648                                                         <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
 649                                                          AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
 650                                         };
 651
 652                                         pinctrl_i2c1_gpio: i2c1-gpio {
 653                                                 atmel,pins =
 654                                                         <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
 655                                                          AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 656                                         };
 657                                 };
 658
 659                                 i2c2 {
 660                                         pinctrl_i2c2: i2c2-0 {
 661                                                 atmel,pins =
 662                                                         <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE   /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
 663                                                          AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
 664                                         };
 665
 666                                         pinctrl_i2c2_gpio: i2c2-gpio {
 667                                                 atmel,pins =
 668                                                         <AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
 669                                                          AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 670                                         };
 671                                 };
 672
 673                                 isi {
 674                                         pinctrl_isi_data_0_7: isi-0-data-0-7 {
 675                                                 atmel,pins =
 676                                                         <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
 677                                                          AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
 678                                                          AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
 679                                                          AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
 680                                                          AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
 681                                                          AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
 682                                                          AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
 683                                                          AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
 684                                                          AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC30 periph C ISI_PCK, conflicts with UTXD0 */
 685                                                          AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
 686                                                          AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
 687                                         };
 688
 689                                         pinctrl_isi_data_8_9: isi-0-data-8-9 {
 690                                                 atmel,pins =
 691                                                         <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
 692                                                          AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
 693                                         };
 694
 695                                         pinctrl_isi_data_10_11: isi-0-data-10-11 {
 696                                                 atmel,pins =
 697                                                         <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
 698                                                          AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
 699                                         };
 700                                 };
 701
 702                                 mmc0 {
 703                                         pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
 704                                                 atmel,pins =
 705                                                         <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD9 periph A MCI0_CK */
 706                                                          AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */
 707                                                          AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PD1 periph A MCI0_DA0 with pullup */
 708                                         };
 709                                         pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
 710                                                 atmel,pins =
 711                                                         <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */
 712                                                          AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */
 713                                                          AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PD4 periph A MCI0_DA3 with pullup */
 714                                         };
 715                                         pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
 716                                                 atmel,pins =
 717                                                         <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
 718                                                          AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
 719                                                          AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conflicts with TCLK0, PWMH3 */
 720                                                          AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
 721                                         };
 722                                 };
 723
 724                                 mmc1 {
 725                                         pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
 726                                                 atmel,pins =
 727                                                         <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB24 periph A MCI1_CK, conflicts with GRX5 */
 728                                                          AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
 729                                                          AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
 730                                         };
 731                                         pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
 732                                                 atmel,pins =
 733                                                         <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
 734                                                          AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
 735                                                          AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
 736                                         };
 737                                 };
 738
 739                                 nand0 {
 740                                         pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
 741                                                 atmel,pins =
 742                                                         <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PE21 periph A with pullup */
 743                                                          AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PE22 periph A with pullup */
 744                                         };
 745                                 };
 746
 747                                 pwm0 {
 748                                         pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
 749                                                 atmel,pins =
 750                                                         <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */
 751                                         };
 752                                         pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
 753                                                 atmel,pins =
 754                                                         <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GTX0 */
 755                                         };
 756                                         pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
 757                                                 atmel,pins =
 758                                                         <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */
 759                                         };
 760                                         pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
 761                                                 atmel,pins =
 762                                                         <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GTX1 */
 763                                         };
 764
 765                                         pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
 766                                                 atmel,pins =
 767                                                         <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */
 768                                         };
 769                                         pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
 770                                                 atmel,pins =
 771                                                         <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GRX0 */
 772                                         };
 773                                         pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
 774                                                 atmel,pins =
 775                                                         <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */
 776                                         };
 777                                         pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
 778                                                 atmel,pins =
 779                                                         <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */
 780                                         };
 781                                         pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
 782                                                 atmel,pins =
 783                                                         <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GRX1 */
 784                                         };
 785                                         pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
 786                                                 atmel,pins =
 787                                                         <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */
 788                                         };
 789
 790                                         pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
 791                                                 atmel,pins =
 792                                                         <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GTXCK */
 793                                         };
 794                                         pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
 795                                                 atmel,pins =
 796                                                         <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* conflicts with MCI0_DA4 and TIOA0 */
 797                                         };
 798                                         pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
 799                                                 atmel,pins =
 800                                                         <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GTXEN */
 801                                         };
 802                                         pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
 803                                                 atmel,pins =
 804                                                         <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* conflicts with MCI0_DA5 and TIOB0 */
 805                                         };
 806
 807                                         pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
 808                                                 atmel,pins =
 809                                                         <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */
 810                                         };
 811                                         pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
 812                                                 atmel,pins =
 813                                                         <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* conflicts with MCI0_DA6 and TCLK0 */
 814                                         };
 815                                         pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
 816                                                 atmel,pins =
 817                                                         <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */
 818                                         };
 819                                         pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
 820                                                 atmel,pins =
 821                                                         <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* conflicts with MCI0_DA7 */
 822                                         };
 823                                 };
 824
 825                                 spi0 {
 826                                         pinctrl_spi0: spi0-0 {
 827                                                 atmel,pins =
 828                                                         <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD10 periph A SPI0_MISO pin */
 829                                                          AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD11 periph A SPI0_MOSI pin */
 830                                                          AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */
 831                                         };
 832                                 };
 833
 834                                 spi1 {
 835                                         pinctrl_spi1: spi1-0 {
 836                                                 atmel,pins =
 837                                                         <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC22 periph A SPI1_MISO pin */
 838                                                          AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC23 periph A SPI1_MOSI pin */
 839                                                          AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */
 840                                         };
 841                                 };
 842
 843                                 ssc0 {
 844                                         pinctrl_ssc0_tx: ssc0_tx {
 845                                                 atmel,pins =
 846                                                         <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC16 periph A TK0 */
 847                                                          AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC17 periph A TF0 */
 848                                                          AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */
 849                                         };
 850
 851                                         pinctrl_ssc0_rx: ssc0_rx {
 852                                                 atmel,pins =
 853                                                         <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC19 periph A RK0 */
 854                                                          AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC20 periph A RF0 */
 855                                                          AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */
 856                                         };
 857                                 };
 858
 859                                 ssc1 {
 860                                         pinctrl_ssc1_tx: ssc1_tx {
 861                                                 atmel,pins =
 862                                                         <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB2 periph B TK1, conflicts with GTX2 */
 863                                                          AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB3 periph B TF1, conflicts with GTX3 */
 864                                                          AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB6 periph B TD1, conflicts with TD1 */
 865                                         };
 866
 867                                         pinctrl_ssc1_rx: ssc1_rx {
 868                                                 atmel,pins =
 869                                                         <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB7 periph B RK1, conflicts with EREFCK */
 870                                                          AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PB10 periph B RF1, conflicts with GTXER */
 871                                                          AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */
 872                                         };
 873                                 };
 874
 875                                 uart0 {
 876                                         pinctrl_uart0: uart0-0 {
 877                                                 atmel,pins =
 878                                                         <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* conflicts with PWMFI2, ISI_D8 */
 879                                                          AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with ISI_PCK */
 880                                         };
 881                                 };
 882
 883                                 uart1 {
 884                                         pinctrl_uart1: uart1-0 {
 885                                                 atmel,pins =
 886                                                         <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* conflicts with TWD0, ISI_VSYNC */
 887                                                          AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with TWCK0, ISI_HSYNC */
 888                                         };
 889                                 };
 890
 891                                 usart0 {
 892                                         pinctrl_usart0: usart0-0 {
 893                                                 atmel,pins =
 894                                                         <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 895                                                          AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 896                                         };
 897
 898                                         pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
 899                                                 atmel,pins =
 900                                                         <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
 901                                                          AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
 902                                         };
 903                                 };
 904
 905                                 usart1 {
 906                                         pinctrl_usart1: usart1-0 {
 907                                                 atmel,pins =
 908                                                         <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 909                                                          AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 910                                         };
 911
 912                                         pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
 913                                                 atmel,pins =
 914                                                         <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB26 periph A, conflicts with GRX7 */
 915                                                          AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */
 916                                         };
 917                                 };
 918
 919                                 usart2 {
 920                                         pinctrl_usart2: usart2-0 {
 921                                                 atmel,pins =
 922                                                         <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* conflicts with A25 */
 923                                                          AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts NCS0 */
 924                                         };
 925
 926                                         pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
 927                                                 atmel,pins =
 928                                                         <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PE23 periph B, conflicts with A23 */
 929                                                          AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */
 930                                         };
 931                                 };
 932
 933                                 usart3 {
 934                                         pinctrl_usart3: usart3-0 {
 935                                                 atmel,pins =
 936                                                         <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* conflicts with A18 */
 937                                                          AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with A19 */
 938                                         };
 939
 940                                         pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
 941                                                 atmel,pins =
 942                                                         <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PE16 periph B, conflicts with A16 */
 943                                                          AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */
 944                                         };
 945                                 };
 946
 947
 948                                 pioA: gpio@fffff200 {
 949                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 950                                         reg = <0xfffff200 0x100>;
 951                                         interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
 952                                         #gpio-cells = <2>;
 953                                         gpio-controller;
 954                                         interrupt-controller;
 955                                         #interrupt-cells = <2>;
 956                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 957                                 };
 958
 959                                 pioB: gpio@fffff400 {
 960                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 961                                         reg = <0xfffff400 0x100>;
 962                                         interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
 963                                         #gpio-cells = <2>;
 964                                         gpio-controller;
 965                                         interrupt-controller;
 966                                         #interrupt-cells = <2>;
 967                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 968                                 };
 969
 970                                 pioC: gpio@fffff600 {
 971                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 972                                         reg = <0xfffff600 0x100>;
 973                                         interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
 974                                         #gpio-cells = <2>;
 975                                         gpio-controller;
 976                                         interrupt-controller;
 977                                         #interrupt-cells = <2>;
 978                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 979                                 };
 980
 981                                 pioD: gpio@fffff800 {
 982                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 983                                         reg = <0xfffff800 0x100>;
 984                                         interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
 985                                         #gpio-cells = <2>;
 986                                         gpio-controller;
 987                                         interrupt-controller;
 988                                         #interrupt-cells = <2>;
 989                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 990                                 };
 991
 992                                 pioE: gpio@fffffa00 {
 993                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 994                                         reg = <0xfffffa00 0x100>;
 995                                         interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
 996                                         #gpio-cells = <2>;
 997                                         gpio-controller;
 998                                         interrupt-controller;
 999                                         #interrupt-cells = <2>;
1000                                         clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
1001                                 };
1002                         };
1003
1004                         pmc: pmc@fffffc00 {
1005                                 compatible = "atmel,sama5d3-pmc", "syscon";
1006                                 reg = <0xfffffc00 0x120>;
1007                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1008                                 #clock-cells = <2>;
1009                                 clocks = <&clk32k>, <&main_xtal>;
1010                                 clock-names = "slow_clk", "main_xtal";
1011                         };
1012
1013                         reset_controller: reset-controller@fffffe00 {
1014                                 compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
1015                                 reg = <0xfffffe00 0x10>;
1016                                 clocks = <&clk32k>;
1017                         };
1018
1019                         shutdown_controller: shutdown-controller@fffffe10 {
1020                                 compatible = "atmel,at91sam9x5-shdwc";
1021                                 reg = <0xfffffe10 0x10>;
1022                                 clocks = <&clk32k>;
1023                         };
1024
1025                         pit: timer@fffffe30 {
1026                                 compatible = "atmel,at91sam9260-pit";
1027                                 reg = <0xfffffe30 0xf>;
1028                                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
1029                                 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
1030                         };
1031
1032                         watchdog: watchdog@fffffe40 {
1033                                 compatible = "atmel,at91sam9260-wdt";
1034                                 reg = <0xfffffe40 0x10>;
1035                                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
1036                                 clocks = <&clk32k>;
1037                                 atmel,watchdog-type = "hardware";
1038                                 atmel,reset-type = "all";
1039                                 atmel,dbg-halt;
1040                                 status = "disabled";
1041                         };
1042
1043                         clk32k: sckc@fffffe50 {
1044                                 compatible = "atmel,sama5d3-sckc";
1045                                 reg = <0xfffffe50 0x4>;
1046                                 clocks = <&slow_xtal>;
1047                                 #clock-cells = <0>;
1048                         };
1049
1050                         rtc@fffffeb0 {
1051                                 compatible = "atmel,at91rm9200-rtc";
1052                                 reg = <0xfffffeb0 0x30>;
1053                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1054                                 clocks = <&clk32k>;
1055                         };
1056                 };
1057
1058                 nfc_sram: sram@200000 {
1059                         compatible = "mmio-sram";
1060                         no-memory-wc;
1061                         reg = <0x200000 0x2400>;
1062                         #address-cells = <1>;
1063                         #size-cells = <1>;
1064                         ranges = <0 0x200000 0x2400>;
1065                 };
1066
1067                 usb0: gadget@500000 {
1068                         compatible = "atmel,sama5d3-udc";
1069                         reg = <0x00500000 0x100000
1070                                0xf8030000 0x4000>;
1071                         interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
1072                         clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
1073                         clock-names = "pclk", "hclk";
1074                         status = "disabled";
1075                 };
1076
1077                 usb1: ohci@600000 {
1078                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1079                         reg = <0x00600000 0x100000>;
1080                         interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
1081                         clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
1082                         clock-names = "ohci_clk", "hclk", "uhpck";
1083                         status = "disabled";
1084                 };
1085
1086                 usb2: ehci@700000 {
1087                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
1088                         reg = <0x00700000 0x100000>;
1089                         interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
1090                         clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
1091                         clock-names = "usb_clk", "ehci_clk";
1092                         status = "disabled";
1093                 };
1094
1095                 ebi: ebi@10000000 {
1096                         compatible = "atmel,sama5d3-ebi";
1097                         #address-cells = <2>;
1098                         #size-cells = <1>;
1099                         atmel,smc = <&hsmc>;
1100                         reg = <0x10000000 0x10000000
1101                                0x40000000 0x30000000>;
1102                         ranges = <0x0 0x0 0x10000000 0x10000000
1103                                   0x1 0x0 0x40000000 0x10000000
1104                                   0x2 0x0 0x50000000 0x10000000
1105                                   0x3 0x0 0x60000000 0x10000000>;
1106                         clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
1107                         status = "disabled";
1108
1109                         nand_controller: nand-controller {
1110                                 compatible = "atmel,sama5d3-nand-controller";
1111                                 atmel,nfc-sram = <&nfc_sram>;
1112                                 atmel,nfc-io = <&nfc_io>;
1113                                 ecc-engine = <&pmecc>;
1114                                 #address-cells = <2>;
1115                                 #size-cells = <1>;
1116                                 ranges;
1117                                 status = "disabled";
1118                         };
1119                 };
1120
1121                 nfc_io: nfc-io@70000000 {
1122                         compatible = "atmel,sama5d3-nfc-io", "syscon";
1123                         reg = <0x70000000 0x8000000>;
1124                 };
1125         };
1126 };