arch/arm/boot/dts/r8a7791-koelsch.dts

   1 /*
   2  * Device Tree Source for the Koelsch board
   3  *
   4  * Copyright (C) 2013 Renesas Electronics Corporation
   5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   6  * Copyright (C) 2014 Cogent Embedded, Inc.
   7  *
   8  * This file is licensed under the terms of the GNU General Public License
   9  * version 2.  This program is licensed "as is" without any warranty of any
  10  * kind, whether express or implied.
  11  */
  12
  13 /*
  14  * SSI-AK4643
  15  *
  16  * SW1: 1: AK4643
  17  *      2: CN22
  18  *      3: ADV7511
  19  *
  20  * This command is required when Playback/Capture
  21  *
  22  *      amixer set "LINEOUT Mixer DACL" on
  23  *      amixer set "DVC Out" 100%
  24  *      amixer set "DVC In" 100%
  25  *
  26  * You can use Mute
  27  *
  28  *      amixer set "DVC Out Mute" on
  29  *      amixer set "DVC In Mute" on
  30  *
  31  * You can use Volume Ramp
  32  *
  33  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  34  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  35  *      amixer set "DVC Out Ramp" on
  36  *      aplay xxx.wav &
  37  *      amixer set "DVC Out"  80%  // Volume Down
  38  *      amixer set "DVC Out" 100%  // Volume Up
  39  */
  40
  41 /dts-v1/;
  42 #include "r8a7791.dtsi"
  43 #include <dt-bindings/gpio/gpio.h>
  44 #include <dt-bindings/input/input.h>
  45
  46 / {
  47         model = "Koelsch";
  48         compatible = "renesas,koelsch", "renesas,r8a7791";
  49
  50         aliases {
  51                 serial0 = &scif0;
  52                 serial1 = &scif1;
  53                 i2c9 = &gpioi2c1;
  54                 i2c12 = &i2cexio1;
  55         };
  56
  57         chosen {
  58                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  59                 stdout-path = "serial0:115200n8";
  60         };
  61
  62         memory@40000000 {
  63                 device_type = "memory";
  64                 reg = <0 0x40000000 0 0x40000000>;
  65         };
  66
  67         memory@200000000 {
  68                 device_type = "memory";
  69                 reg = <2 0x00000000 0 0x40000000>;
  70         };
  71
  72         lbsc {
  73                 #address-cells = <1>;
  74                 #size-cells = <1>;
  75         };
  76
  77         keyboard {
  78                 compatible = "gpio-keys";
  79
  80                 key-1 {
  81                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_1>;
  83                         label = "SW2-1";
  84                         wakeup-source;
  85                         debounce-interval = <20>;
  86                 };
  87                 key-2 {
  88                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  89                         linux,code = <KEY_2>;
  90                         label = "SW2-2";
  91                         wakeup-source;
  92                         debounce-interval = <20>;
  93                 };
  94                 key-3 {
  95                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_3>;
  97                         label = "SW2-3";
  98                         wakeup-source;
  99                         debounce-interval = <20>;
 100                 };
 101                 key-4 {
 102                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 103                         linux,code = <KEY_4>;
 104                         label = "SW2-4";
 105                         wakeup-source;
 106                         debounce-interval = <20>;
 107                 };
 108                 key-a {
 109                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_A>;
 111                         label = "SW30";
 112                         wakeup-source;
 113                         debounce-interval = <20>;
 114                 };
 115                 key-b {
 116                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 117                         linux,code = <KEY_B>;
 118                         label = "SW31";
 119                         wakeup-source;
 120                         debounce-interval = <20>;
 121                 };
 122                 key-c {
 123                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 124                         linux,code = <KEY_C>;
 125                         label = "SW32";
 126                         wakeup-source;
 127                         debounce-interval = <20>;
 128                 };
 129                 key-d {
 130                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 131                         linux,code = <KEY_D>;
 132                         label = "SW33";
 133                         wakeup-source;
 134                         debounce-interval = <20>;
 135                 };
 136                 key-e {
 137                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 138                         linux,code = <KEY_E>;
 139                         label = "SW34";
 140                         wakeup-source;
 141                         debounce-interval = <20>;
 142                 };
 143                 key-f {
 144                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 145                         linux,code = <KEY_F>;
 146                         label = "SW35";
 147                         wakeup-source;
 148                         debounce-interval = <20>;
 149                 };
 150                 key-g {
 151                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 152                         linux,code = <KEY_G>;
 153                         label = "SW36";
 154                         wakeup-source;
 155                         debounce-interval = <20>;
 156                 };
 157         };
 158
 159         leds {
 160                 compatible = "gpio-leds";
 161                 led6 {
 162                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 163                         label = "LED6";
 164                 };
 165                 led7 {
 166                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 167                         label = "LED7";
 168                 };
 169                 led8 {
 170                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 171                         label = "LED8";
 172                 };
 173         };
 174
 175         vcc_sdhi0: regulator-vcc-sdhi0 {
 176                 compatible = "regulator-fixed";
 177
 178                 regulator-name = "SDHI0 Vcc";
 179                 regulator-min-microvolt = <3300000>;
 180                 regulator-max-microvolt = <3300000>;
 181
 182                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 183                 enable-active-high;
 184         };
 185
 186         vccq_sdhi0: regulator-vccq-sdhi0 {
 187                 compatible = "regulator-gpio";
 188
 189                 regulator-name = "SDHI0 VccQ";
 190                 regulator-min-microvolt = <1800000>;
 191                 regulator-max-microvolt = <3300000>;
 192
 193                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 194                 gpios-states = <1>;
 195                 states = <3300000 1
 196                           1800000 0>;
 197         };
 198
 199         vcc_sdhi1: regulator-vcc-sdhi1 {
 200                 compatible = "regulator-fixed";
 201
 202                 regulator-name = "SDHI1 Vcc";
 203                 regulator-min-microvolt = <3300000>;
 204                 regulator-max-microvolt = <3300000>;
 205
 206                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 207                 enable-active-high;
 208         };
 209
 210         vccq_sdhi1: regulator-vccq-sdhi1 {
 211                 compatible = "regulator-gpio";
 212
 213                 regulator-name = "SDHI1 VccQ";
 214                 regulator-min-microvolt = <1800000>;
 215                 regulator-max-microvolt = <3300000>;
 216
 217                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 218                 gpios-states = <1>;
 219                 states = <3300000 1
 220                           1800000 0>;
 221         };
 222
 223         vcc_sdhi2: regulator-vcc-sdhi2 {
 224                 compatible = "regulator-fixed";
 225
 226                 regulator-name = "SDHI2 Vcc";
 227                 regulator-min-microvolt = <3300000>;
 228                 regulator-max-microvolt = <3300000>;
 229
 230                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 231                 enable-active-high;
 232         };
 233
 234         vccq_sdhi2: regulator-vccq-sdhi2 {
 235                 compatible = "regulator-gpio";
 236
 237                 regulator-name = "SDHI2 VccQ";
 238                 regulator-min-microvolt = <1800000>;
 239                 regulator-max-microvolt = <3300000>;
 240
 241                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 242                 gpios-states = <1>;
 243                 states = <3300000 1
 244                           1800000 0>;
 245         };
 246
 247         audio_clock: audio_clock {
 248                 compatible = "fixed-clock";
 249                 #clock-cells = <0>;
 250                 clock-frequency = <11289600>;
 251         };
 252
 253         rsnd_ak4643: sound {
 254                 compatible = "simple-audio-card";
 255
 256                 simple-audio-card,format = "left_j";
 257                 simple-audio-card,bitclock-master = <&sndcodec>;
 258                 simple-audio-card,frame-master = <&sndcodec>;
 259
 260                 sndcpu: simple-audio-card,cpu {
 261                         sound-dai = <&rcar_sound>;
 262                 };
 263
 264                 sndcodec: simple-audio-card,codec {
 265                         sound-dai = <&ak4643>;
 266                         clocks = <&audio_clock>;
 267                 };
 268         };
 269
 270         hdmi-in {
 271                 compatible = "hdmi-connector";
 272                 type = "a";
 273
 274                 port {
 275                         hdmi_con_in: endpoint {
 276                                 remote-endpoint = <&adv7612_in>;
 277                         };
 278                 };
 279         };
 280
 281         cec_clock: cec-clock {
 282                 compatible = "fixed-clock";
 283                 #clock-cells = <0>;
 284                 clock-frequency = <12000000>;
 285         };
 286
 287         hdmi-out {
 288                 compatible = "hdmi-connector";
 289                 type = "a";
 290
 291                 port {
 292                         hdmi_con_out: endpoint {
 293                                 remote-endpoint = <&adv7511_out>;
 294                         };
 295                 };
 296         };
 297
 298         x2_clk: x2-clock {
 299                 compatible = "fixed-clock";
 300                 #clock-cells = <0>;
 301                 clock-frequency = <74250000>;
 302         };
 303
 304         x13_clk: x13-clock {
 305                 compatible = "fixed-clock";
 306                 #clock-cells = <0>;
 307                 clock-frequency = <148500000>;
 308         };
 309
 310         gpioi2c1: i2c-9 {
 311                 #address-cells = <1>;
 312                 #size-cells = <0>;
 313                 compatible = "i2c-gpio";
 314                 status = "disabled";
 315                 gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */
 316                          &gpio7 15 GPIO_ACTIVE_HIGH /* scl */
 317                         >;
 318                 i2c-gpio,delay-us = <5>;
 319         };
 320
 321         /*
 322          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 323          * A fallback to GPIO is provided.
 324          */
 325         i2cexio1: i2c-12 {
 326                 compatible = "i2c-demux-pinctrl";
 327                 i2c-parent = <&i2c1>, <&gpioi2c1>;
 328                 i2c-bus-name = "i2c-exio1";
 329                 #address-cells = <1>;
 330                 #size-cells = <0>;
 331         };
 332 };
 333
 334 &du {
 335         pinctrl-0 = <&du_pins>;
 336         pinctrl-names = "default";
 337         status = "okay";
 338
 339         clocks = <&mstp7_clks R8A7791_CLK_DU0>,
 340                  <&mstp7_clks R8A7791_CLK_DU1>,
 341                  <&mstp7_clks R8A7791_CLK_LVDS0>,
 342                  <&x13_clk>, <&x2_clk>;
 343         clock-names = "du.0", "du.1", "lvds.0",
 344                       "dclkin.0", "dclkin.1";
 345
 346         ports {
 347                 port@0 {
 348                         endpoint {
 349                                 remote-endpoint = <&adv7511_in>;
 350                         };
 351                 };
 352                 port@1 {
 353                         lvds_connector: endpoint {
 354                         };
 355                 };
 356         };
 357 };
 358
 359 &extal_clk {
 360         clock-frequency = <20000000>;
 361 };
 362
 363 &pfc {
 364         pinctrl-0 = <&scif_clk_pins>;
 365         pinctrl-names = "default";
 366
 367         i2c1_pins: i2c1 {
 368                 groups = "i2c1";
 369                 function = "i2c1";
 370         };
 371
 372         i2c2_pins: i2c2 {
 373                 groups = "i2c2";
 374                 function = "i2c2";
 375         };
 376
 377         du_pins: du {
 378                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 379                 function = "du";
 380         };
 381
 382         scif0_pins: scif0 {
 383                 groups = "scif0_data_d";
 384                 function = "scif0";
 385         };
 386
 387         scif1_pins: scif1 {
 388                 groups = "scif1_data_d";
 389                 function = "scif1";
 390         };
 391
 392         scif_clk_pins: scif_clk {
 393                 groups = "scif_clk";
 394                 function = "scif_clk";
 395         };
 396
 397         ether_pins: ether {
 398                 groups = "eth_link", "eth_mdio", "eth_rmii";
 399                 function = "eth";
 400         };
 401
 402         phy1_pins: phy1 {
 403                 groups = "intc_irq0";
 404                 function = "intc";
 405         };
 406
 407         sdhi0_pins: sd0 {
 408                 groups = "sdhi0_data4", "sdhi0_ctrl";
 409                 function = "sdhi0";
 410                 power-source = <3300>;
 411         };
 412
 413         sdhi0_pins_uhs: sd0_uhs {
 414                 groups = "sdhi0_data4", "sdhi0_ctrl";
 415                 function = "sdhi0";
 416                 power-source = <1800>;
 417         };
 418
 419         sdhi1_pins: sd1 {
 420                 groups = "sdhi1_data4", "sdhi1_ctrl";
 421                 function = "sdhi1";
 422                 power-source = <3300>;
 423         };
 424
 425         sdhi1_pins_uhs: sd1_uhs {
 426                 groups = "sdhi1_data4", "sdhi1_ctrl";
 427                 function = "sdhi1";
 428                 power-source = <1800>;
 429         };
 430
 431         sdhi2_pins: sd2 {
 432                 groups = "sdhi2_data4", "sdhi2_ctrl";
 433                 function = "sdhi2";
 434                 power-source = <3300>;
 435         };
 436
 437         sdhi2_pins_uhs: sd2_uhs {
 438                 groups = "sdhi2_data4", "sdhi2_ctrl";
 439                 function = "sdhi2";
 440                 power-source = <1800>;
 441         };
 442
 443         qspi_pins: qspi {
 444                 groups = "qspi_ctrl", "qspi_data4";
 445                 function = "qspi";
 446         };
 447
 448         msiof0_pins: msiof0 {
 449                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 450                                  "msiof0_tx";
 451                 function = "msiof0";
 452         };
 453
 454         usb0_pins: usb0 {
 455                 groups = "usb0";
 456                 function = "usb0";
 457         };
 458
 459         usb1_pins: usb1 {
 460                 groups = "usb1";
 461                 function = "usb1";
 462         };
 463
 464         vin0_pins: vin0 {
 465                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 466                 function = "vin0";
 467         };
 468
 469         vin1_pins: vin1 {
 470                 groups = "vin1_data8", "vin1_clk";
 471                 function = "vin1";
 472         };
 473
 474         sound_pins: sound {
 475                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 476                 function = "ssi";
 477         };
 478
 479         sound_clk_pins: sound_clk {
 480                 groups = "audio_clk_a";
 481                 function = "audio_clk";
 482         };
 483 };
 484
 485 &ether {
 486         pinctrl-0 = <&ether_pins &phy1_pins>;
 487         pinctrl-names = "default";
 488
 489         phy-handle = <&phy1>;
 490         renesas,ether-link-active-low;
 491         status = "okay";
 492
 493         phy1: ethernet-phy@1 {
 494                 reg = <1>;
 495                 interrupt-parent = <&irqc0>;
 496                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 497                 micrel,led-mode = <1>;
 498         };
 499 };
 500
 501 &cmt0 {
 502         status = "okay";
 503 };
 504
 505 &sata0 {
 506         status = "okay";
 507 };
 508
 509 &scif0 {
 510         pinctrl-0 = <&scif0_pins>;
 511         pinctrl-names = "default";
 512
 513         status = "okay";
 514 };
 515
 516 &scif1 {
 517         pinctrl-0 = <&scif1_pins>;
 518         pinctrl-names = "default";
 519
 520         status = "okay";
 521 };
 522
 523 &scif_clk {
 524         clock-frequency = <14745600>;
 525 };
 526
 527 &sdhi0 {
 528         pinctrl-0 = <&sdhi0_pins>;
 529         pinctrl-1 = <&sdhi0_pins_uhs>;
 530         pinctrl-names = "default", "state_uhs";
 531
 532         vmmc-supply = <&vcc_sdhi0>;
 533         vqmmc-supply = <&vccq_sdhi0>;
 534         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 535         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 536         sd-uhs-sdr50;
 537         sd-uhs-sdr104;
 538         status = "okay";
 539 };
 540
 541 &sdhi1 {
 542         pinctrl-0 = <&sdhi1_pins>;
 543         pinctrl-1 = <&sdhi1_pins_uhs>;
 544         pinctrl-names = "default", "state_uhs";
 545
 546         vmmc-supply = <&vcc_sdhi1>;
 547         vqmmc-supply = <&vccq_sdhi1>;
 548         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 549         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 550         sd-uhs-sdr50;
 551         status = "okay";
 552 };
 553
 554 &sdhi2 {
 555         pinctrl-0 = <&sdhi2_pins>;
 556         pinctrl-1 = <&sdhi2_pins_uhs>;
 557         pinctrl-names = "default", "state_uhs";
 558
 559         vmmc-supply = <&vcc_sdhi2>;
 560         vqmmc-supply = <&vccq_sdhi2>;
 561         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 562         sd-uhs-sdr50;
 563         status = "okay";
 564 };
 565
 566 &qspi {
 567         pinctrl-0 = <&qspi_pins>;
 568         pinctrl-names = "default";
 569
 570         status = "okay";
 571
 572         flash: flash@0 {
 573                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 574                 reg = <0>;
 575                 spi-max-frequency = <30000000>;
 576                 spi-tx-bus-width = <4>;
 577                 spi-rx-bus-width = <4>;
 578                 spi-cpha;
 579                 spi-cpol;
 580                 m25p,fast-read;
 581
 582                 partitions {
 583                         compatible = "fixed-partitions";
 584                         #address-cells = <1>;
 585                         #size-cells = <1>;
 586
 587                         partition@0 {
 588                                 label = "loader";
 589                                 reg = <0x00000000 0x00080000>;
 590                                 read-only;
 591                         };
 592                         partition@80000 {
 593                                 label = "user";
 594                                 reg = <0x00080000 0x00580000>;
 595                                 read-only;
 596                         };
 597                         partition@600000 {
 598                                 label = "flash";
 599                                 reg = <0x00600000 0x03a00000>;
 600                         };
 601                 };
 602         };
 603 };
 604
 605 &msiof0 {
 606         pinctrl-0 = <&msiof0_pins>;
 607         pinctrl-names = "default";
 608
 609         status = "okay";
 610
 611         pmic: pmic@0 {
 612                 compatible = "renesas,r2a11302ft";
 613                 reg = <0>;
 614                 spi-max-frequency = <6000000>;
 615                 spi-cpol;
 616                 spi-cpha;
 617         };
 618 };
 619
 620 &i2c1 {
 621         pinctrl-0 = <&i2c1_pins>;
 622         pinctrl-names = "i2c-exio1";
 623 };
 624
 625 &i2c2 {
 626         pinctrl-0 = <&i2c2_pins>;
 627         pinctrl-names = "default";
 628
 629         status = "okay";
 630         clock-frequency = <100000>;
 631
 632         ak4643: codec@12 {
 633                 compatible = "asahi-kasei,ak4643";
 634                 #sound-dai-cells = <0>;
 635                 reg = <0x12>;
 636         };
 637
 638         composite-in@20 {
 639                 compatible = "adi,adv7180";
 640                 reg = <0x20>;
 641                 remote = <&vin1>;
 642
 643                 port {
 644                         adv7180: endpoint {
 645                                 bus-width = <8>;
 646                                 remote-endpoint = <&vin1ep>;
 647                         };
 648                 };
 649         };
 650
 651         hdmi@39 {
 652                 compatible = "adi,adv7511w";
 653                 reg = <0x39>;
 654                 interrupt-parent = <&gpio3>;
 655                 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 656                 clocks = <&cec_clock>;
 657                 clock-names = "cec";
 658
 659                 adi,input-depth = <8>;
 660                 adi,input-colorspace = "rgb";
 661                 adi,input-clock = "1x";
 662                 adi,input-style = <1>;
 663                 adi,input-justification = "evenly";
 664
 665                 ports {
 666                         #address-cells = <1>;
 667                         #size-cells = <0>;
 668
 669                         port@0 {
 670                                 reg = <0>;
 671                                 adv7511_in: endpoint {
 672                                         remote-endpoint = <&du_out_rgb>;
 673                                 };
 674                         };
 675
 676                         port@1 {
 677                                 reg = <1>;
 678                                 adv7511_out: endpoint {
 679                                         remote-endpoint = <&hdmi_con_out>;
 680                                 };
 681                         };
 682                 };
 683         };
 684
 685         hdmi-in@4c {
 686                 compatible = "adi,adv7612";
 687                 reg = <0x4c>;
 688                 interrupt-parent = <&gpio4>;
 689                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 690                 default-input = <0>;
 691
 692                 ports {
 693                         #address-cells = <1>;
 694                         #size-cells = <0>;
 695
 696                         port@0 {
 697                                 reg = <0>;
 698                                 adv7612_in: endpoint {
 699                                         remote-endpoint = <&hdmi_con_in>;
 700                                 };
 701                         };
 702
 703                         port@2 {
 704                                 reg = <2>;
 705                                 adv7612_out: endpoint {
 706                                         remote-endpoint = <&vin0ep2>;
 707                                 };
 708                         };
 709                 };
 710         };
 711
 712         eeprom@50 {
 713                 compatible = "renesas,24c02", "atmel,24c02";
 714                 reg = <0x50>;
 715                 pagesize = <16>;
 716         };
 717 };
 718
 719 &i2c6 {
 720         status = "okay";
 721         clock-frequency = <100000>;
 722
 723         pmic@58 {
 724                 compatible = "dlg,da9063";
 725                 reg = <0x58>;
 726                 interrupt-parent = <&irqc0>;
 727                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 728                 interrupt-controller;
 729
 730                 rtc {
 731                         compatible = "dlg,da9063-rtc";
 732                 };
 733
 734                 wdt {
 735                         compatible = "dlg,da9063-watchdog";
 736                 };
 737         };
 738
 739         vdd_dvfs: regulator@68 {
 740                 compatible = "dlg,da9210";
 741                 reg = <0x68>;
 742                 interrupt-parent = <&irqc0>;
 743                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 744
 745                 regulator-min-microvolt = <1000000>;
 746                 regulator-max-microvolt = <1000000>;
 747                 regulator-boot-on;
 748                 regulator-always-on;
 749         };
 750 };
 751
 752 &pci0 {
 753         status = "okay";
 754         pinctrl-0 = <&usb0_pins>;
 755         pinctrl-names = "default";
 756 };
 757
 758 &pci1 {
 759         status = "okay";
 760         pinctrl-0 = <&usb1_pins>;
 761         pinctrl-names = "default";
 762 };
 763
 764 &hsusb {
 765         status = "okay";
 766         pinctrl-0 = <&usb0_pins>;
 767         pinctrl-names = "default";
 768         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 769 };
 770
 771 &usbphy {
 772         status = "okay";
 773 };
 774
 775 &pcie_bus_clk {
 776         clock-frequency = <100000000>;
 777 };
 778
 779 &pciec {
 780         status = "okay";
 781 };
 782
 783 &cpu0 {
 784         cpu0-supply = <&vdd_dvfs>;
 785 };
 786
 787 /* HDMI video input */
 788 &vin0 {
 789         status = "okay";
 790         pinctrl-0 = <&vin0_pins>;
 791         pinctrl-names = "default";
 792
 793         port {
 794                 #address-cells = <1>;
 795                 #size-cells = <0>;
 796
 797                 vin0ep2: endpoint {
 798                         remote-endpoint = <&adv7612_out>;
 799                         bus-width = <24>;
 800                         hsync-active = <0>;
 801                         vsync-active = <0>;
 802                         pclk-sample = <1>;
 803                         data-active = <1>;
 804                 };
 805         };
 806 };
 807
 808 /* composite video input */
 809 &vin1 {
 810         status = "okay";
 811         pinctrl-0 = <&vin1_pins>;
 812         pinctrl-names = "default";
 813
 814         port {
 815                 #address-cells = <1>;
 816                 #size-cells = <0>;
 817
 818                 vin1ep: endpoint {
 819                         remote-endpoint = <&adv7180>;
 820                         bus-width = <8>;
 821                 };
 822         };
 823 };
 824
 825 &rcar_sound {
 826         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 827         pinctrl-names = "default";
 828
 829         /* Single DAI */
 830         #sound-dai-cells = <0>;
 831
 832         status = "okay";
 833
 834         rcar_sound,dai {
 835                 dai0 {
 836                         playback = <&ssi0 &src2 &dvc0>;
 837                         capture  = <&ssi1 &src3 &dvc1>;
 838                 };
 839         };
 840 };
 841
 842 &ssi1 {
 843         shared-pin;
 844 };