arch/arm/boot/dts/qcom-pma8084.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   3 #include <dt-bindings/interrupt-controller/irq.h>
   4 #include <dt-bindings/spmi/spmi.h>
   5
   6 &spmi_bus {
   7
   8         pma8084_0: pma8084@0 {
   9                 compatible = "qcom,pma8084", "qcom,spmi-pmic";
  10                 reg = <0x0 SPMI_USID>;
  11                 #address-cells = <1>;
  12                 #size-cells = <0>;
  13
  14                 rtc@6000 {
  15                         compatible = "qcom,pm8941-rtc";
  16                         reg = <0x6000>,
  17                               <0x6100>;
  18                         reg-names = "rtc", "alarm";
  19                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
  20                 };
  21
  22                 pwrkey@800 {
  23                         compatible = "qcom,pm8941-pwrkey";
  24                         reg = <0x800>;
  25                         interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
  26                         debounce = <15625>;
  27                         bias-pull-up;
  28                 };
  29
  30                 pma8084_gpios: gpios@c000 {
  31                         compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
  32                         reg = <0xc000>;
  33                         gpio-controller;
  34                         gpio-ranges = <&pma8084_gpios 0 0 22>;
  35                         #gpio-cells = <2>;
  36                         interrupt-controller;
  37                         #interrupt-cells = <2>;
  38                 };
  39
  40                 pma8084_mpps: mpps@a000 {
  41                         compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
  42                         reg = <0xa000>;
  43                         gpio-controller;
  44                         #gpio-cells = <2>;
  45                         gpio-ranges = <&pma8084_mpps 0 0 8>;
  46                         interrupt-controller;
  47                         #interrupt-cells = <2>;
  48                 };
  49
  50                 pma8084_temp: temp-alarm@2400 {
  51                         compatible = "qcom,spmi-temp-alarm";
  52                         reg = <0x2400>;
  53                         interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
  54                         #thermal-sensor-cells = <0>;
  55                         io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
  56                         io-channel-names = "thermal";
  57                 };
  58
  59                 pma8084_vadc: adc@3100 {
  60                         compatible = "qcom,spmi-vadc";
  61                         reg = <0x3100>;
  62                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  63                         #address-cells = <1>;
  64                         #size-cells = <0>;
  65                         #io-channel-cells = <1>;
  66
  67                         die_temp {
  68                                 reg = <VADC_DIE_TEMP>;
  69                         };
  70                         ref_625mv {
  71                                 reg = <VADC_REF_625MV>;
  72                         };
  73                         ref_1250v {
  74                                 reg = <VADC_REF_1250MV>;
  75                         };
  76                         ref_buf_625mv {
  77                                 reg = <VADC_SPARE1>;
  78                         };
  79                         ref_gnd {
  80                                 reg = <VADC_GND_REF>;
  81                         };
  82                         ref_vdd {
  83                                 reg = <VADC_VDD_VADC>;
  84                         };
  85                 };
  86         };
  87
  88         pma8084_1: pma8084@1 {
  89                 compatible = "qcom,pma8084", "qcom,spmi-pmic";
  90                 reg = <0x1 SPMI_USID>;
  91                 #address-cells = <1>;
  92                 #size-cells = <0>;
  93         };
  94 };