arch/arm/boot/dts/qcom-pm8226.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 #include <dt-bindings/interrupt-controller/irq.h>
   3 #include <dt-bindings/spmi/spmi.h>
   4 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   5
   6 &spmi_bus {
   7         pm8226_0: pm8226@0 {
   8                 compatible = "qcom,pm8226", "qcom,spmi-pmic";
   9                 reg = <0x0 SPMI_USID>;
  10                 #address-cells = <1>;
  11                 #size-cells = <0>;
  12
  13                 pwrkey@800 {
  14                         compatible = "qcom,pm8941-pwrkey";
  15                         reg = <0x800>;
  16                         interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
  17                         debounce = <15625>;
  18                         bias-pull-up;
  19                 };
  20
  21                 smbb: charger@1000 {
  22                         compatible = "qcom,pm8226-charger";
  23                         reg = <0x1000>;
  24                         interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
  25                                      <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
  26                                      <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
  27                                      <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
  28                                      <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
  29                                      <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
  30                                      <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
  31                                      <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
  32                         interrupt-names = "chg-done",
  33                                           "chg-fast",
  34                                           "chg-trkl",
  35                                           "bat-temp-ok",
  36                                           "bat-present",
  37                                           "chg-gone",
  38                                           "usb-valid",
  39                                           "dc-valid";
  40
  41                         chg_otg: otg-vbus { };
  42                 };
  43
  44                 rtc@6000 {
  45                         compatible = "qcom,pm8941-rtc";
  46                         reg = <0x6000>, <0x6100>;
  47                         reg-names = "rtc", "alarm";
  48                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
  49                 };
  50
  51                 pm8226_vadc: adc@3100 {
  52                         compatible = "qcom,spmi-vadc";
  53                         reg = <0x3100>;
  54                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  55                         #address-cells = <1>;
  56                         #size-cells = <0>;
  57                         #io-channel-cells = <1>;
  58
  59                         adc-chan@7 {
  60                                 reg = <VADC_VSYS>;
  61                                 qcom,pre-scaling = <1 3>;
  62                                 label = "vph_pwr";
  63                         };
  64                         adc-chan@8 {
  65                                 reg = <VADC_DIE_TEMP>;
  66                                 label = "die_temp";
  67                         };
  68                         adc-chan@9 {
  69                                 reg = <VADC_REF_625MV>;
  70                                 label = "ref_625mv";
  71                         };
  72                         adc-chan@a {
  73                                 reg = <VADC_REF_1250MV>;
  74                                 label = "ref_1250mv";
  75                         };
  76                         adc-chan@e {
  77                                 reg = <VADC_GND_REF>;
  78                         };
  79                         adc-chan@f {
  80                                 reg = <VADC_VDD_VADC>;
  81                         };
  82                 };
  83
  84                 pm8226_mpps: mpps@a000 {
  85                         compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
  86                         reg = <0xa000>;
  87                         gpio-controller;
  88                         #gpio-cells = <2>;
  89                         gpio-ranges = <&pm8226_mpps 0 0 8>;
  90                         interrupt-controller;
  91                         #interrupt-cells = <2>;
  92                 };
  93         };
  94
  95         pm8226_1: pm8226@1 {
  96                 compatible = "qcom,pm8226", "qcom,spmi-pmic";
  97                 reg = <0x1 SPMI_USID>;
  98                 #address-cells = <1>;
  99                 #size-cells = <0>;
 100
 101                 pm8226_spmi_regulators: pm8226-regulators {
 102                         compatible = "qcom,pm8226-regulators";
 103                 };
 104
 105                 pm8226_vib: vibrator@c000 {
 106                         compatible = "qcom,pm8916-vib";
 107                         reg = <0xc000>;
 108                         status = "disabled";
 109                 };
 110         };
 111 };