arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include "qcom-msm8974pro.dtsi"
   3 #include "qcom-pm8841.dtsi"
   4 #include "qcom-pm8941.dtsi"
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/leds/common.h>
   7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   8
   9 / {
  10         model = "Sony Xperia Z2 Tablet";
  11         compatible = "sony,xperia-castor", "qcom,msm8974";
  12
  13         aliases {
  14                 serial0 = &blsp1_uart2;
  15                 serial1 = &blsp2_uart1;
  16         };
  17
  18         chosen {
  19                 stdout-path = "serial0:115200n8";
  20         };
  21
  22         gpio-keys {
  23                 compatible = "gpio-keys";
  24
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&gpio_keys_pin_a>;
  27
  28                 key-volume-down {
  29                         label = "volume_down";
  30                         gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
  31                         linux,input-type = <1>;
  32                         linux,code = <KEY_VOLUMEDOWN>;
  33                 };
  34
  35                 key-camera-snapshot {
  36                         label = "camera_snapshot";
  37                         gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
  38                         linux,input-type = <1>;
  39                         linux,code = <KEY_CAMERA>;
  40                 };
  41
  42                 key-camera-focus {
  43                         label = "camera_focus";
  44                         gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
  45                         linux,input-type = <1>;
  46                         linux,code = <KEY_CAMERA_FOCUS>;
  47                 };
  48
  49                 key-volume-up {
  50                         label = "volume_up";
  51                         gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
  52                         linux,input-type = <1>;
  53                         linux,code = <KEY_VOLUMEUP>;
  54                 };
  55         };
  56
  57         vreg_bl_vddio: lcd-backlight-vddio {
  58                 compatible = "regulator-fixed";
  59                 regulator-name = "vreg_bl_vddio";
  60                 regulator-min-microvolt = <3150000>;
  61                 regulator-max-microvolt = <3150000>;
  62
  63                 gpio = <&tlmm 69 0>;
  64                 enable-active-high;
  65
  66                 vin-supply = <&pm8941_s3>;
  67                 startup-delay-us = <70000>;
  68
  69                 pinctrl-names = "default";
  70                 pinctrl-0 = <&lcd_backlight_en_pin_a>;
  71         };
  72
  73         vreg_vsp: lcd-dcdc-regulator {
  74                 compatible = "regulator-fixed";
  75                 regulator-name = "vreg_vsp";
  76                 regulator-min-microvolt = <5600000>;
  77                 regulator-max-microvolt = <5600000>;
  78
  79                 gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
  80                 enable-active-high;
  81
  82                 pinctrl-names = "default";
  83                 pinctrl-0 = <&lcd_dcdc_en_pin_a>;
  84         };
  85
  86         vreg_wlan: wlan-regulator {
  87                 compatible = "regulator-fixed";
  88
  89                 regulator-name = "wl-reg";
  90                 regulator-min-microvolt = <3300000>;
  91                 regulator-max-microvolt = <3300000>;
  92
  93                 gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
  94                 enable-active-high;
  95
  96                 pinctrl-names = "default";
  97                 pinctrl-0 = <&wlan_regulator_pin>;
  98         };
  99 };
 100
 101 &blsp1_uart2 {
 102         status = "okay";
 103 };
 104
 105 &blsp2_i2c2 {
 106         status = "okay";
 107         clock-frequency = <355000>;
 108
 109         synaptics@2c {
 110                 compatible = "syna,rmi4-i2c";
 111                 reg = <0x2c>;
 112
 113                 interrupt-parent = <&tlmm>;
 114                 interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
 115
 116                 #address-cells = <1>;
 117                 #size-cells = <0>;
 118
 119                 vdd-supply = <&pm8941_l22>;
 120                 vio-supply = <&pm8941_lvs3>;
 121
 122                 pinctrl-names = "default";
 123                 pinctrl-0 = <&ts_int_pin>;
 124
 125                 syna,startup-delay-ms = <10>;
 126
 127                 rmi4-f01@1 {
 128                         reg = <0x1>;
 129                         syna,nosleep-mode = <1>;
 130                 };
 131
 132                 rmi4-f11@11 {
 133                         reg = <0x11>;
 134                         syna,sensor-type = <1>;
 135                         touchscreen-inverted-x;
 136                 };
 137         };
 138 };
 139
 140 &blsp2_i2c5 {
 141         status = "okay";
 142         clock-frequency = <355000>;
 143
 144         lp8566_wled: backlight@2c {
 145                 compatible = "ti,lp8556";
 146                 reg = <0x2c>;
 147                 power-supply = <&vreg_bl_vddio>;
 148
 149                 bl-name = "backlight";
 150                 dev-ctrl = /bits/ 8 <0x05>;
 151                 init-brt = /bits/ 8 <0x3f>;
 152                 rom_a0h {
 153                         rom-addr = /bits/ 8 <0xa0>;
 154                         rom-val = /bits/ 8 <0xff>;
 155                 };
 156                 rom_a1h {
 157                         rom-addr = /bits/ 8 <0xa1>;
 158                         rom-val = /bits/ 8 <0x3f>;
 159                 };
 160                 rom_a2h {
 161                         rom-addr = /bits/ 8 <0xa2>;
 162                         rom-val = /bits/ 8 <0x20>;
 163                 };
 164                 rom_a3h {
 165                         rom-addr = /bits/ 8 <0xa3>;
 166                         rom-val = /bits/ 8 <0x5e>;
 167                 };
 168                 rom_a4h {
 169                         rom-addr = /bits/ 8 <0xa4>;
 170                         rom-val = /bits/ 8 <0x02>;
 171                 };
 172                 rom_a5h {
 173                         rom-addr = /bits/ 8 <0xa5>;
 174                         rom-val = /bits/ 8 <0x04>;
 175                 };
 176                 rom_a6h {
 177                         rom-addr = /bits/ 8 <0xa6>;
 178                         rom-val = /bits/ 8 <0x80>;
 179                 };
 180                 rom_a7h {
 181                         rom-addr = /bits/ 8 <0xa7>;
 182                         rom-val = /bits/ 8 <0xf7>;
 183                 };
 184                 rom_a9h {
 185                         rom-addr = /bits/ 8 <0xa9>;
 186                         rom-val = /bits/ 8 <0x80>;
 187                 };
 188                 rom_aah {
 189                         rom-addr = /bits/ 8 <0xaa>;
 190                         rom-val = /bits/ 8 <0x0f>;
 191                 };
 192                 rom_aeh {
 193                         rom-addr = /bits/ 8 <0xae>;
 194                         rom-val = /bits/ 8 <0x0f>;
 195                 };
 196         };
 197 };
 198
 199 &blsp2_uart1 {
 200         status = "okay";
 201
 202         bluetooth {
 203                 compatible = "brcm,bcm43438-bt";
 204                 max-speed = <3000000>;
 205
 206                 pinctrl-names = "default";
 207                 pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
 208
 209                 host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
 210                 device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 211                 shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
 212         };
 213 };
 214
 215 &otg {
 216         status = "okay";
 217
 218         phys = <&usb_hs1_phy>;
 219         phy-select = <&tcsr 0xb000 0>;
 220         extcon = <&smbb>, <&usb_id>;
 221         vbus-supply = <&chg_otg>;
 222
 223         hnp-disable;
 224         srp-disable;
 225         adp-disable;
 226
 227         ulpi {
 228                 phy@a {
 229                         status = "okay";
 230
 231                         v1p8-supply = <&pm8941_l6>;
 232                         v3p3-supply = <&pm8941_l24>;
 233
 234                         extcon = <&smbb>;
 235                         qcom,init-seq = /bits/ 8 <0x1 0x64>;
 236                 };
 237         };
 238 };
 239
 240 &pm8941_coincell {
 241         status = "okay";
 242
 243         qcom,rset-ohms = <2100>;
 244         qcom,vset-millivolts = <3000>;
 245 };
 246
 247 &pm8941_gpios {
 248         gpio_keys_pin_a: gpio-keys-active-state {
 249                 pins = "gpio2", "gpio5";
 250                 function = "normal";
 251
 252                 bias-pull-up;
 253                 power-source = <PM8941_GPIO_S3>;
 254         };
 255
 256         bt_reg_on_pin: bt-reg-on-state {
 257                 pins = "gpio16";
 258                 function = "normal";
 259
 260                 output-low;
 261                 power-source = <PM8941_GPIO_S3>;
 262         };
 263
 264         wlan_sleep_clk_pin: wl-sleep-clk-state {
 265                 pins = "gpio17";
 266                 function = "func2";
 267
 268                 output-high;
 269                 power-source = <PM8941_GPIO_S3>;
 270         };
 271
 272         wlan_regulator_pin: wl-reg-active-state {
 273                 pins = "gpio18";
 274                 function = "normal";
 275
 276                 bias-disable;
 277                 power-source = <PM8941_GPIO_S3>;
 278         };
 279
 280         lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
 281                 pins = "gpio20";
 282                 function = "normal";
 283
 284                 bias-disable;
 285                 power-source = <PM8941_GPIO_S3>;
 286                 input-disable;
 287                 output-low;
 288         };
 289
 290 };
 291
 292 &pm8941_lpg {
 293         status = "okay";
 294
 295         qcom,power-source = <1>;
 296
 297         rgb-led {
 298                 color = <LED_COLOR_ID_RGB>;
 299                 function = LED_FUNCTION_STATUS;
 300
 301                 #address-cells = <1>;
 302                 #size-cells = <0>;
 303
 304                 led@5 {
 305                         reg = <5>;
 306                         color = <LED_COLOR_ID_BLUE>;
 307                 };
 308
 309                 led@6 {
 310                         reg = <6>;
 311                         color = <LED_COLOR_ID_GREEN>;
 312                 };
 313
 314                 led@7 {
 315                         reg = <7>;
 316                         color = <LED_COLOR_ID_RED>;
 317                 };
 318         };
 319 };
 320
 321 &rpm_requests {
 322         pm8941-regulators {
 323                 compatible = "qcom,rpm-pm8941-regulators";
 324
 325                 vdd_l1_l3-supply = <&pm8941_s1>;
 326                 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
 327                 vdd_l4_l11-supply = <&pm8941_s1>;
 328                 vdd_l5_l7-supply = <&pm8941_s2>;
 329                 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
 330                 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
 331                 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
 332                 vdd_l21-supply = <&vreg_boost>;
 333
 334                 pm8941_s1: s1 {
 335                         regulator-min-microvolt = <1300000>;
 336                         regulator-max-microvolt = <1300000>;
 337                         regulator-always-on;
 338                         regulator-boot-on;
 339                 };
 340
 341                 pm8941_s2: s2 {
 342                         regulator-min-microvolt = <2150000>;
 343                         regulator-max-microvolt = <2150000>;
 344                         regulator-boot-on;
 345                 };
 346
 347                 pm8941_s3: s3 {
 348                         regulator-min-microvolt = <1800000>;
 349                         regulator-max-microvolt = <1800000>;
 350                         regulator-system-load = <154000>;
 351                         regulator-always-on;
 352                         regulator-boot-on;
 353                 };
 354
 355                 pm8941_s4: s4 {
 356                         regulator-min-microvolt = <5000000>;
 357                         regulator-max-microvolt = <5000000>;
 358                 };
 359
 360                 pm8941_l1: l1 {
 361                         regulator-min-microvolt = <1225000>;
 362                         regulator-max-microvolt = <1225000>;
 363                         regulator-always-on;
 364                         regulator-boot-on;
 365                 };
 366
 367                 pm8941_l2: l2 {
 368                         regulator-min-microvolt = <1200000>;
 369                         regulator-max-microvolt = <1200000>;
 370                 };
 371
 372                 pm8941_l3: l3 {
 373                         regulator-min-microvolt = <1200000>;
 374                         regulator-max-microvolt = <1200000>;
 375                 };
 376
 377                 pm8941_l4: l4 {
 378                         regulator-min-microvolt = <1225000>;
 379                         regulator-max-microvolt = <1225000>;
 380                 };
 381
 382                 pm8941_l5: l5 {
 383                         regulator-min-microvolt = <1800000>;
 384                         regulator-max-microvolt = <1800000>;
 385                 };
 386
 387                 pm8941_l6: l6 {
 388                         regulator-min-microvolt = <1800000>;
 389                         regulator-max-microvolt = <1800000>;
 390                         regulator-boot-on;
 391                 };
 392
 393                 pm8941_l7: l7 {
 394                         regulator-min-microvolt = <1800000>;
 395                         regulator-max-microvolt = <1800000>;
 396                         regulator-boot-on;
 397                 };
 398
 399                 pm8941_l8: l8 {
 400                         regulator-min-microvolt = <1800000>;
 401                         regulator-max-microvolt = <1800000>;
 402                 };
 403
 404                 pm8941_l9: l9 {
 405                         regulator-min-microvolt = <1800000>;
 406                         regulator-max-microvolt = <2950000>;
 407                 };
 408
 409                 pm8941_l11: l11 {
 410                         regulator-min-microvolt = <1300000>;
 411                         regulator-max-microvolt = <1350000>;
 412                 };
 413
 414                 pm8941_l12: l12 {
 415                         regulator-min-microvolt = <1800000>;
 416                         regulator-max-microvolt = <1800000>;
 417                         regulator-always-on;
 418                         regulator-boot-on;
 419                 };
 420
 421                 pm8941_l13: l13 {
 422                         regulator-min-microvolt = <1800000>;
 423                         regulator-max-microvolt = <2950000>;
 424                         regulator-boot-on;
 425                 };
 426
 427                 pm8941_l14: l14 {
 428                         regulator-min-microvolt = <1800000>;
 429                         regulator-max-microvolt = <1800000>;
 430                 };
 431
 432                 pm8941_l15: l15 {
 433                         regulator-min-microvolt = <2050000>;
 434                         regulator-max-microvolt = <2050000>;
 435                 };
 436
 437                 pm8941_l16: l16 {
 438                         regulator-min-microvolt = <2700000>;
 439                         regulator-max-microvolt = <2700000>;
 440                 };
 441
 442                 pm8941_l17: l17 {
 443                         regulator-min-microvolt = <2700000>;
 444                         regulator-max-microvolt = <2700000>;
 445                 };
 446
 447                 pm8941_l18: l18 {
 448                         regulator-min-microvolt = <2850000>;
 449                         regulator-max-microvolt = <2850000>;
 450                 };
 451
 452                 pm8941_l19: l19 {
 453                         regulator-min-microvolt = <2850000>;
 454                         regulator-max-microvolt = <2850000>;
 455                 };
 456
 457                 pm8941_l20: l20 {
 458                         regulator-min-microvolt = <2950000>;
 459                         regulator-max-microvolt = <2950000>;
 460                         regulator-system-load = <500000>;
 461                         regulator-allow-set-load;
 462                         regulator-boot-on;
 463                 };
 464
 465                 pm8941_l21: l21 {
 466                         regulator-min-microvolt = <2950000>;
 467                         regulator-max-microvolt = <2950000>;
 468                         regulator-boot-on;
 469                 };
 470
 471                 pm8941_l22: l22 {
 472                         regulator-min-microvolt = <3000000>;
 473                         regulator-max-microvolt = <3000000>;
 474                 };
 475
 476                 pm8941_l23: l23 {
 477                         regulator-min-microvolt = <2800000>;
 478                         regulator-max-microvolt = <2800000>;
 479                 };
 480
 481                 pm8941_l24: l24 {
 482                         regulator-min-microvolt = <3075000>;
 483                         regulator-max-microvolt = <3075000>;
 484                         regulator-boot-on;
 485                 };
 486
 487                 pm8941_lvs3: lvs3 {};
 488         };
 489 };
 490
 491 &sdhc_1 {
 492         status = "okay";
 493
 494         vmmc-supply = <&pm8941_l20>;
 495         vqmmc-supply = <&pm8941_s3>;
 496
 497         pinctrl-names = "default", "sleep";
 498         pinctrl-0 = <&sdc1_on>;
 499         pinctrl-1 = <&sdc1_off>;
 500 };
 501
 502 &sdhc_2 {
 503         status = "okay";
 504
 505         vmmc-supply = <&pm8941_l21>;
 506         vqmmc-supply = <&pm8941_l13>;
 507
 508         cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
 509
 510         pinctrl-names = "default", "sleep";
 511         pinctrl-0 = <&sdc2_on>;
 512         pinctrl-1 = <&sdc2_off>;
 513 };
 514
 515 &sdhc_3 {
 516         status = "okay";
 517
 518         max-frequency = <100000000>;
 519         vmmc-supply = <&vreg_wlan>;
 520         non-removable;
 521
 522         pinctrl-names = "default";
 523         pinctrl-0 = <&sdc3_on>;
 524
 525         #address-cells = <1>;
 526         #size-cells = <0>;
 527
 528         bcrmf@1 {
 529                 compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
 530                 reg = <1>;
 531
 532                 brcm,drive-strength = <10>;
 533
 534                 pinctrl-names = "default";
 535                 pinctrl-0 = <&wlan_sleep_clk_pin>;
 536         };
 537 };
 538
 539 &smbb {
 540         qcom,fast-charge-safe-current = <1500000>;
 541         qcom,fast-charge-current-limit = <1500000>;
 542         qcom,dc-current-limit = <1800000>;
 543         qcom,fast-charge-safe-voltage = <4400000>;
 544         qcom,fast-charge-high-threshold-voltage = <4350000>;
 545         qcom,fast-charge-low-threshold-voltage = <3400000>;
 546         qcom,auto-recharge-threshold-voltage = <4200000>;
 547         qcom,minimum-input-voltage = <4300000>;
 548 };
 549
 550 &tlmm {
 551         lcd_backlight_en_pin_a: lcd-backlight-vddio {
 552                 pins = "gpio69";
 553                 drive-strength = <10>;
 554                 output-low;
 555                 bias-disable;
 556         };
 557
 558         sdc1_on: sdc1-on {
 559                 clk {
 560                         pins = "sdc1_clk";
 561                         drive-strength = <16>;
 562                         bias-disable;
 563                 };
 564
 565                 cmd-data {
 566                         pins = "sdc1_cmd", "sdc1_data";
 567                         drive-strength = <10>;
 568                         bias-pull-up;
 569                 };
 570         };
 571
 572         sdc2_on: sdc2-on {
 573                 clk {
 574                         pins = "sdc2_clk";
 575                         drive-strength = <6>;
 576                         bias-disable;
 577                 };
 578
 579                 cmd-data {
 580                         pins = "sdc2_cmd", "sdc2_data";
 581                         drive-strength = <6>;
 582                         bias-pull-up;
 583                 };
 584
 585                 cd {
 586                         pins = "gpio62";
 587                         function = "gpio";
 588                         drive-strength = <2>;
 589                         bias-disable;
 590                 };
 591         };
 592
 593         sdc3_on: sdc3-on {
 594                 clk {
 595                         pins = "gpio40";
 596                         function = "sdc3";
 597                         drive-strength = <10>;
 598                         bias-disable;
 599                 };
 600
 601                 cmd {
 602                         pins = "gpio39";
 603                         function = "sdc3";
 604                         drive-strength = <10>;
 605                         bias-pull-up;
 606                 };
 607
 608                 data {
 609                         pins = "gpio35", "gpio36", "gpio37", "gpio38";
 610                         function = "sdc3";
 611                         drive-strength = <10>;
 612                         bias-pull-up;
 613                 };
 614         };
 615
 616         ts_int_pin: ts-int-pin {
 617                 pins = "gpio86";
 618                 function = "gpio";
 619                 drive-strength = <2>;
 620                 bias-disable;
 621                 input-enable;
 622         };
 623
 624         bt_host_wake_pin: bt-host-wake {
 625                 pins = "gpio95";
 626                 function = "gpio";
 627                 drive-strength = <2>;
 628                 bias-disable;
 629                 output-low;
 630         };
 631
 632         bt_dev_wake_pin: bt-dev-wake {
 633                 pins = "gpio96";
 634                 function = "gpio";
 635                 drive-strength = <2>;
 636                 bias-disable;
 637         };
 638 };