arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include "qcom-msm8974pro.dtsi"
   3 #include "qcom-pm8841.dtsi"
   4 #include "qcom-pm8941.dtsi"
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   7
   8 / {
   9         model = "Sony Xperia Z2 Tablet";
  10         compatible = "sony,xperia-castor", "qcom,msm8974";
  11
  12         aliases {
  13                 serial0 = &blsp1_uart2;
  14                 serial1 = &blsp2_uart1;
  15         };
  16
  17         chosen {
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         gpio-keys {
  22                 compatible = "gpio-keys";
  23
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&gpio_keys_pin_a>;
  26
  27                 volume-down {
  28                         label = "volume_down";
  29                         gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
  30                         linux,input-type = <1>;
  31                         linux,code = <KEY_VOLUMEDOWN>;
  32                 };
  33
  34                 camera-snapshot {
  35                         label = "camera_snapshot";
  36                         gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
  37                         linux,input-type = <1>;
  38                         linux,code = <KEY_CAMERA>;
  39                 };
  40
  41                 camera-focus {
  42                         label = "camera_focus";
  43                         gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
  44                         linux,input-type = <1>;
  45                         linux,code = <KEY_CAMERA_FOCUS>;
  46                 };
  47
  48                 volume-up {
  49                         label = "volume_up";
  50                         gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
  51                         linux,input-type = <1>;
  52                         linux,code = <KEY_VOLUMEUP>;
  53                 };
  54         };
  55
  56         vreg_bl_vddio: lcd-backlight-vddio {
  57                 compatible = "regulator-fixed";
  58                 regulator-name = "vreg_bl_vddio";
  59                 regulator-min-microvolt = <3150000>;
  60                 regulator-max-microvolt = <3150000>;
  61
  62                 gpio = <&tlmm 69 0>;
  63                 enable-active-high;
  64
  65                 vin-supply = <&pm8941_s3>;
  66                 startup-delay-us = <70000>;
  67
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&lcd_backlight_en_pin_a>;
  70         };
  71
  72         vreg_vsp: lcd-dcdc-regulator {
  73                 compatible = "regulator-fixed";
  74                 regulator-name = "vreg_vsp";
  75                 regulator-min-microvolt = <5600000>;
  76                 regulator-max-microvolt = <5600000>;
  77
  78                 gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
  79                 enable-active-high;
  80
  81                 pinctrl-names = "default";
  82                 pinctrl-0 = <&lcd_dcdc_en_pin_a>;
  83         };
  84
  85         vreg_wlan: wlan-regulator {
  86                 compatible = "regulator-fixed";
  87
  88                 regulator-name = "wl-reg";
  89                 regulator-min-microvolt = <3300000>;
  90                 regulator-max-microvolt = <3300000>;
  91
  92                 gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
  93                 enable-active-high;
  94
  95                 pinctrl-names = "default";
  96                 pinctrl-0 = <&wlan_regulator_pin>;
  97         };
  98 };
  99
 100 &blsp1_uart2 {
 101         status = "okay";
 102 };
 103
 104 &blsp2_i2c2 {
 105         status = "okay";
 106         clock-frequency = <355000>;
 107
 108         synaptics@2c {
 109                 compatible = "syna,rmi4-i2c";
 110                 reg = <0x2c>;
 111
 112                 interrupt-parent = <&tlmm>;
 113                 interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
 114
 115                 #address-cells = <1>;
 116                 #size-cells = <0>;
 117
 118                 vdd-supply = <&pm8941_l22>;
 119                 vio-supply = <&pm8941_lvs3>;
 120
 121                 pinctrl-names = "default";
 122                 pinctrl-0 = <&ts_int_pin>;
 123
 124                 syna,startup-delay-ms = <10>;
 125
 126                 rmi-f01@1 {
 127                         reg = <0x1>;
 128                         syna,nosleep = <1>;
 129                 };
 130
 131                 rmi-f11@11 {
 132                         reg = <0x11>;
 133                         syna,f11-flip-x = <1>;
 134                         syna,sensor-type = <1>;
 135                 };
 136         };
 137 };
 138
 139 &blsp2_i2c5 {
 140         status = "okay";
 141         clock-frequency = <355000>;
 142
 143         lp8566_wled: backlight@2c {
 144                 compatible = "ti,lp8556";
 145                 reg = <0x2c>;
 146                 power-supply = <&vreg_bl_vddio>;
 147
 148                 bl-name = "backlight";
 149                 dev-ctrl = /bits/ 8 <0x05>;
 150                 init-brt = /bits/ 8 <0x3f>;
 151                 rom_a0h {
 152                         rom-addr = /bits/ 8 <0xa0>;
 153                         rom-val = /bits/ 8 <0xff>;
 154                 };
 155                 rom_a1h {
 156                         rom-addr = /bits/ 8 <0xa1>;
 157                         rom-val = /bits/ 8 <0x3f>;
 158                 };
 159                 rom_a2h {
 160                         rom-addr = /bits/ 8 <0xa2>;
 161                         rom-val = /bits/ 8 <0x20>;
 162                 };
 163                 rom_a3h {
 164                         rom-addr = /bits/ 8 <0xa3>;
 165                         rom-val = /bits/ 8 <0x5e>;
 166                 };
 167                 rom_a4h {
 168                         rom-addr = /bits/ 8 <0xa4>;
 169                         rom-val = /bits/ 8 <0x02>;
 170                 };
 171                 rom_a5h {
 172                         rom-addr = /bits/ 8 <0xa5>;
 173                         rom-val = /bits/ 8 <0x04>;
 174                 };
 175                 rom_a6h {
 176                         rom-addr = /bits/ 8 <0xa6>;
 177                         rom-val = /bits/ 8 <0x80>;
 178                 };
 179                 rom_a7h {
 180                         rom-addr = /bits/ 8 <0xa7>;
 181                         rom-val = /bits/ 8 <0xf7>;
 182                 };
 183                 rom_a9h {
 184                         rom-addr = /bits/ 8 <0xa9>;
 185                         rom-val = /bits/ 8 <0x80>;
 186                 };
 187                 rom_aah {
 188                         rom-addr = /bits/ 8 <0xaa>;
 189                         rom-val = /bits/ 8 <0x0f>;
 190                 };
 191                 rom_aeh {
 192                         rom-addr = /bits/ 8 <0xae>;
 193                         rom-val = /bits/ 8 <0x0f>;
 194                 };
 195         };
 196 };
 197
 198 &blsp2_uart1 {
 199         status = "okay";
 200
 201         bluetooth {
 202                 compatible = "brcm,bcm43438-bt";
 203                 max-speed = <3000000>;
 204
 205                 pinctrl-names = "default";
 206                 pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
 207
 208                 host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
 209                 device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 210                 shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
 211         };
 212 };
 213
 214 &otg {
 215         status = "okay";
 216
 217         phys = <&usb_hs1_phy>;
 218         phy-select = <&tcsr 0xb000 0>;
 219         extcon = <&smbb>, <&usb_id>;
 220         vbus-supply = <&chg_otg>;
 221
 222         hnp-disable;
 223         srp-disable;
 224         adp-disable;
 225
 226         ulpi {
 227                 phy@a {
 228                         status = "okay";
 229
 230                         v1p8-supply = <&pm8941_l6>;
 231                         v3p3-supply = <&pm8941_l24>;
 232
 233                         extcon = <&smbb>;
 234                         qcom,init-seq = /bits/ 8 <0x1 0x64>;
 235                 };
 236         };
 237 };
 238
 239 &pm8941_coincell {
 240         status = "okay";
 241
 242         qcom,rset-ohms = <2100>;
 243         qcom,vset-millivolts = <3000>;
 244 };
 245
 246 &pm8941_gpios {
 247         gpio_keys_pin_a: gpio-keys-active {
 248                 pins = "gpio2", "gpio5";
 249                 function = "normal";
 250
 251                 bias-pull-up;
 252                 power-source = <PM8941_GPIO_S3>;
 253         };
 254
 255         bt_reg_on_pin: bt-reg-on {
 256                 pins = "gpio16";
 257                 function = "normal";
 258
 259                 output-low;
 260                 power-source = <PM8941_GPIO_S3>;
 261         };
 262
 263         wlan_sleep_clk_pin: wl-sleep-clk {
 264                 pins = "gpio17";
 265                 function = "func2";
 266
 267                 output-high;
 268                 power-source = <PM8941_GPIO_S3>;
 269         };
 270
 271         wlan_regulator_pin: wl-reg-active {
 272                 pins = "gpio18";
 273                 function = "normal";
 274
 275                 bias-disable;
 276                 power-source = <PM8941_GPIO_S3>;
 277         };
 278
 279         lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
 280                 pins = "gpio20";
 281                 function = "normal";
 282
 283                 bias-disable;
 284                 power-source = <PM8941_GPIO_S3>;
 285                 input-disable;
 286                 output-low;
 287         };
 288
 289 };
 290
 291 &rpm_requests {
 292         pm8941-regulators {
 293                 compatible = "qcom,rpm-pm8941-regulators";
 294
 295                 vdd_l1_l3-supply = <&pm8941_s1>;
 296                 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
 297                 vdd_l4_l11-supply = <&pm8941_s1>;
 298                 vdd_l5_l7-supply = <&pm8941_s2>;
 299                 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
 300                 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
 301                 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
 302                 vdd_l21-supply = <&vreg_boost>;
 303
 304                 pm8941_s1: s1 {
 305                         regulator-min-microvolt = <1300000>;
 306                         regulator-max-microvolt = <1300000>;
 307                         regulator-always-on;
 308                         regulator-boot-on;
 309                 };
 310
 311                 pm8941_s2: s2 {
 312                         regulator-min-microvolt = <2150000>;
 313                         regulator-max-microvolt = <2150000>;
 314                         regulator-boot-on;
 315                 };
 316
 317                 pm8941_s3: s3 {
 318                         regulator-min-microvolt = <1800000>;
 319                         regulator-max-microvolt = <1800000>;
 320                         regulator-system-load = <154000>;
 321                         regulator-always-on;
 322                         regulator-boot-on;
 323                 };
 324
 325                 pm8941_s4: s4 {
 326                         regulator-min-microvolt = <5000000>;
 327                         regulator-max-microvolt = <5000000>;
 328                 };
 329
 330                 pm8941_l1: l1 {
 331                         regulator-min-microvolt = <1225000>;
 332                         regulator-max-microvolt = <1225000>;
 333                         regulator-always-on;
 334                         regulator-boot-on;
 335                 };
 336
 337                 pm8941_l2: l2 {
 338                         regulator-min-microvolt = <1200000>;
 339                         regulator-max-microvolt = <1200000>;
 340                 };
 341
 342                 pm8941_l3: l3 {
 343                         regulator-min-microvolt = <1200000>;
 344                         regulator-max-microvolt = <1200000>;
 345                 };
 346
 347                 pm8941_l4: l4 {
 348                         regulator-min-microvolt = <1225000>;
 349                         regulator-max-microvolt = <1225000>;
 350                 };
 351
 352                 pm8941_l5: l5 {
 353                         regulator-min-microvolt = <1800000>;
 354                         regulator-max-microvolt = <1800000>;
 355                 };
 356
 357                 pm8941_l6: l6 {
 358                         regulator-min-microvolt = <1800000>;
 359                         regulator-max-microvolt = <1800000>;
 360                         regulator-boot-on;
 361                 };
 362
 363                 pm8941_l7: l7 {
 364                         regulator-min-microvolt = <1800000>;
 365                         regulator-max-microvolt = <1800000>;
 366                         regulator-boot-on;
 367                 };
 368
 369                 pm8941_l8: l8 {
 370                         regulator-min-microvolt = <1800000>;
 371                         regulator-max-microvolt = <1800000>;
 372                 };
 373
 374                 pm8941_l9: l9 {
 375                         regulator-min-microvolt = <1800000>;
 376                         regulator-max-microvolt = <2950000>;
 377                 };
 378
 379                 pm8941_l11: l11 {
 380                         regulator-min-microvolt = <1300000>;
 381                         regulator-max-microvolt = <1350000>;
 382                 };
 383
 384                 pm8941_l12: l12 {
 385                         regulator-min-microvolt = <1800000>;
 386                         regulator-max-microvolt = <1800000>;
 387                         regulator-always-on;
 388                         regulator-boot-on;
 389                 };
 390
 391                 pm8941_l13: l13 {
 392                         regulator-min-microvolt = <1800000>;
 393                         regulator-max-microvolt = <2950000>;
 394                         regulator-boot-on;
 395                 };
 396
 397                 pm8941_l14: l14 {
 398                         regulator-min-microvolt = <1800000>;
 399                         regulator-max-microvolt = <1800000>;
 400                 };
 401
 402                 pm8941_l15: l15 {
 403                         regulator-min-microvolt = <2050000>;
 404                         regulator-max-microvolt = <2050000>;
 405                 };
 406
 407                 pm8941_l16: l16 {
 408                         regulator-min-microvolt = <2700000>;
 409                         regulator-max-microvolt = <2700000>;
 410                 };
 411
 412                 pm8941_l17: l17 {
 413                         regulator-min-microvolt = <2700000>;
 414                         regulator-max-microvolt = <2700000>;
 415                 };
 416
 417                 pm8941_l18: l18 {
 418                         regulator-min-microvolt = <2850000>;
 419                         regulator-max-microvolt = <2850000>;
 420                 };
 421
 422                 pm8941_l19: l19 {
 423                         regulator-min-microvolt = <2850000>;
 424                         regulator-max-microvolt = <2850000>;
 425                 };
 426
 427                 pm8941_l20: l20 {
 428                         regulator-min-microvolt = <2950000>;
 429                         regulator-max-microvolt = <2950000>;
 430                         regulator-system-load = <500000>;
 431                         regulator-allow-set-load;
 432                         regulator-boot-on;
 433                 };
 434
 435                 pm8941_l21: l21 {
 436                         regulator-min-microvolt = <2950000>;
 437                         regulator-max-microvolt = <2950000>;
 438                         regulator-boot-on;
 439                 };
 440
 441                 pm8941_l22: l22 {
 442                         regulator-min-microvolt = <3000000>;
 443                         regulator-max-microvolt = <3000000>;
 444                 };
 445
 446                 pm8941_l23: l23 {
 447                         regulator-min-microvolt = <2800000>;
 448                         regulator-max-microvolt = <2800000>;
 449                 };
 450
 451                 pm8941_l24: l24 {
 452                         regulator-min-microvolt = <3075000>;
 453                         regulator-max-microvolt = <3075000>;
 454                         regulator-boot-on;
 455                 };
 456
 457                 pm8941_lvs3: lvs3 {};
 458         };
 459 };
 460
 461 &sdhc_1 {
 462         status = "okay";
 463
 464         vmmc-supply = <&pm8941_l20>;
 465         vqmmc-supply = <&pm8941_s3>;
 466
 467         pinctrl-names = "default", "sleep";
 468         pinctrl-0 = <&sdc1_on>;
 469         pinctrl-1 = <&sdc1_off>;
 470 };
 471
 472 &sdhc_2 {
 473         status = "okay";
 474
 475         vmmc-supply = <&pm8941_l21>;
 476         vqmmc-supply = <&pm8941_l13>;
 477
 478         cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
 479
 480         pinctrl-names = "default", "sleep";
 481         pinctrl-0 = <&sdc2_on>;
 482         pinctrl-1 = <&sdc2_off>;
 483 };
 484
 485 &sdhc_3 {
 486         status = "okay";
 487
 488         max-frequency = <100000000>;
 489         vmmc-supply = <&vreg_wlan>;
 490         non-removable;
 491
 492         pinctrl-names = "default";
 493         pinctrl-0 = <&sdc3_on>;
 494
 495         #address-cells = <1>;
 496         #size-cells = <0>;
 497
 498         bcrmf@1 {
 499                 compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
 500                 reg = <1>;
 501
 502                 brcm,drive-strength = <10>;
 503
 504                 pinctrl-names = "default";
 505                 pinctrl-0 = <&wlan_sleep_clk_pin>;
 506         };
 507 };
 508
 509 &smbb {
 510         qcom,fast-charge-safe-current = <1500000>;
 511         qcom,fast-charge-current-limit = <1500000>;
 512         qcom,dc-current-limit = <1800000>;
 513         qcom,fast-charge-safe-voltage = <4400000>;
 514         qcom,fast-charge-high-threshold-voltage = <4350000>;
 515         qcom,fast-charge-low-threshold-voltage = <3400000>;
 516         qcom,auto-recharge-threshold-voltage = <4200000>;
 517         qcom,minimum-input-voltage = <4300000>;
 518 };
 519
 520 &tlmm {
 521         lcd_backlight_en_pin_a: lcd-backlight-vddio {
 522                 pins = "gpio69";
 523                 drive-strength = <10>;
 524                 output-low;
 525                 bias-disable;
 526         };
 527
 528         sdc1_on: sdc1-on {
 529                 clk {
 530                         pins = "sdc1_clk";
 531                         drive-strength = <16>;
 532                         bias-disable;
 533                 };
 534
 535                 cmd-data {
 536                         pins = "sdc1_cmd", "sdc1_data";
 537                         drive-strength = <10>;
 538                         bias-pull-up;
 539                 };
 540         };
 541
 542         sdc2_on: sdc2-on {
 543                 clk {
 544                         pins = "sdc2_clk";
 545                         drive-strength = <6>;
 546                         bias-disable;
 547                 };
 548
 549                 cmd-data {
 550                         pins = "sdc2_cmd", "sdc2_data";
 551                         drive-strength = <6>;
 552                         bias-pull-up;
 553                 };
 554
 555                 cd {
 556                         pins = "gpio62";
 557                         function = "gpio";
 558                         drive-strength = <2>;
 559                         bias-disable;
 560                 };
 561         };
 562
 563         sdc3_on: sdc3-on {
 564                 clk {
 565                         pins = "gpio40";
 566                         function = "sdc3";
 567                         drive-strength = <10>;
 568                         bias-disable;
 569                 };
 570
 571                 cmd {
 572                         pins = "gpio39";
 573                         function = "sdc3";
 574                         drive-strength = <10>;
 575                         bias-pull-up;
 576                 };
 577
 578                 data {
 579                         pins = "gpio35", "gpio36", "gpio37", "gpio38";
 580                         function = "sdc3";
 581                         drive-strength = <10>;
 582                         bias-pull-up;
 583                 };
 584         };
 585
 586         ts_int_pin: ts-int-pin {
 587                 pins = "gpio86";
 588                 function = "gpio";
 589                 drive-strength = <2>;
 590                 bias-disable;
 591                 input-enable;
 592         };
 593
 594         bt_host_wake_pin: bt-host-wake {
 595                 pins = "gpio95";
 596                 function = "gpio";
 597                 drive-strength = <2>;
 598                 bias-disable;
 599                 output-low;
 600         };
 601
 602         bt_dev_wake_pin: bt-dev-wake {
 603                 pins = "gpio96";
 604                 function = "gpio";
 605                 drive-strength = <2>;
 606                 bias-disable;
 607         };
 608 };