arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include "qcom-msm8974pro.dtsi"
   3 #include "qcom-pm8841.dtsi"
   4 #include "qcom-pm8941.dtsi"
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   7
   8 / {
   9         model = "Fairphone 2";
  10         compatible = "fairphone,fp2", "qcom,msm8974";
  11
  12         aliases {
  13                 mmc0 = &sdhc_1;
  14                 mmc1 = &sdhc_2;
  15                 serial0 = &blsp1_uart2;
  16         };
  17
  18         chosen {
  19                 stdout-path = "serial0:115200n8";
  20         };
  21
  22         gpio-keys {
  23                 compatible = "gpio-keys";
  24
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&gpio_keys_pin_a>;
  27
  28                 camera-snapshot {
  29                         label = "camera_snapshot";
  30                         gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
  31                         linux,code = <KEY_CAMERA>;
  32                         wakeup-source;
  33                         debounce-interval = <15>;
  34                 };
  35
  36                 volume-down {
  37                         label = "volume_down";
  38                         gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_VOLUMEDOWN>;
  40                         wakeup-source;
  41                         debounce-interval = <15>;
  42                 };
  43
  44                 volume-up {
  45                         label = "volume_up";
  46                         gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_VOLUMEUP>;
  48                         wakeup-source;
  49                         debounce-interval = <15>;
  50                 };
  51         };
  52
  53         vibrator {
  54                 compatible = "gpio-vibrator";
  55                 enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
  56                 vcc-supply = <&pm8941_l18>;
  57         };
  58 };
  59
  60 &blsp1_i2c2 {
  61         status = "okay";
  62
  63         touchscreen@41 {
  64                 compatible = "ilitek,ili2120";
  65                 reg = <0x41>;
  66                 interrupt-parent = <&tlmm>;
  67                 interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
  68                 reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
  69
  70                 touchscreen-size-x = <1080>;
  71                 touchscreen-size-y = <1920>;
  72         };
  73 };
  74
  75 &blsp1_uart2 {
  76         status = "okay";
  77 };
  78
  79 &imem {
  80         reboot-mode {
  81                 mode-normal     = <0x77665501>;
  82                 mode-bootloader = <0x77665500>;
  83                 mode-recovery   = <0x77665502>;
  84         };
  85 };
  86
  87 &otg {
  88         status = "okay";
  89
  90         phys = <&usb_hs1_phy>;
  91         phy-select = <&tcsr 0xb000 0>;
  92         extcon = <&smbb>, <&usb_id>;
  93         vbus-supply = <&chg_otg>;
  94
  95         hnp-disable;
  96         srp-disable;
  97         adp-disable;
  98
  99         ulpi {
 100                 phy@a {
 101                         status = "okay";
 102
 103                         v1p8-supply = <&pm8941_l6>;
 104                         v3p3-supply = <&pm8941_l24>;
 105
 106                         extcon = <&smbb>;
 107                         qcom,init-seq = /bits/ 8 <0x1 0x64>;
 108                 };
 109         };
 110 };
 111
 112 &pm8941_gpios {
 113         gpio_keys_pin_a: gpio-keys-active {
 114                 pins = "gpio1", "gpio2", "gpio5";
 115                 function = "normal";
 116
 117                 bias-pull-up;
 118                 power-source = <PM8941_GPIO_S3>;
 119         };
 120 };
 121
 122 &pronto {
 123         status = "okay";
 124
 125         vddmx-supply = <&pm8841_s1>;
 126         vddcx-supply = <&pm8841_s2>;
 127         vddpx-supply = <&pm8941_s3>;
 128
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&wcnss_pin_a>;
 131
 132         iris {
 133                 vddxo-supply = <&pm8941_l6>;
 134                 vddrfa-supply = <&pm8941_l11>;
 135                 vddpa-supply = <&pm8941_l19>;
 136                 vdddig-supply = <&pm8941_s3>;
 137         };
 138
 139         smd-edge {
 140                 qcom,remote-pid = <4>;
 141                 label = "pronto";
 142
 143                 wcnss {
 144                         status = "okay";
 145                 };
 146         };
 147 };
 148
 149 &remoteproc_adsp {
 150         cx-supply = <&pm8841_s2>;
 151 };
 152
 153 &remoteproc_mss {
 154         cx-supply = <&pm8841_s2>;
 155         mss-supply = <&pm8841_s3>;
 156         mx-supply = <&pm8841_s1>;
 157         pll-supply = <&pm8941_l12>;
 158 };
 159
 160 &rpm_requests {
 161         pm8841-regulators {
 162                 compatible = "qcom,rpm-pm8841-regulators";
 163
 164                 pm8841_s1: s1 {
 165                         regulator-min-microvolt = <675000>;
 166                         regulator-max-microvolt = <1050000>;
 167                 };
 168
 169                 pm8841_s2: s2 {
 170                         regulator-min-microvolt = <500000>;
 171                         regulator-max-microvolt = <1050000>;
 172                 };
 173
 174                 pm8841_s3: s3 {
 175                         regulator-min-microvolt = <1050000>;
 176                         regulator-max-microvolt = <1050000>;
 177                 };
 178         };
 179
 180         pm8941-regulators {
 181                 compatible = "qcom,rpm-pm8941-regulators";
 182
 183                 vdd_l1_l3-supply = <&pm8941_s1>;
 184                 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
 185                 vdd_l4_l11-supply = <&pm8941_s1>;
 186                 vdd_l5_l7-supply = <&pm8941_s2>;
 187                 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
 188                 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
 189                 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
 190                 vdd_l21-supply = <&vreg_boost>;
 191
 192                 pm8941_s1: s1 {
 193                         regulator-min-microvolt = <1300000>;
 194                         regulator-max-microvolt = <1300000>;
 195                         regulator-always-on;
 196                         regulator-boot-on;
 197                 };
 198
 199                 pm8941_s2: s2 {
 200                         regulator-min-microvolt = <2150000>;
 201                         regulator-max-microvolt = <2150000>;
 202                         regulator-boot-on;
 203                 };
 204
 205                 pm8941_s3: s3 {
 206                         regulator-min-microvolt = <1800000>;
 207                         regulator-max-microvolt = <1800000>;
 208                         regulator-always-on;
 209                         regulator-boot-on;
 210                 };
 211
 212                 pm8941_l1: l1 {
 213                         regulator-min-microvolt = <1225000>;
 214                         regulator-max-microvolt = <1225000>;
 215                         regulator-always-on;
 216                         regulator-boot-on;
 217                 };
 218
 219                 pm8941_l2: l2 {
 220                         regulator-min-microvolt = <1200000>;
 221                         regulator-max-microvolt = <1200000>;
 222                 };
 223
 224                 pm8941_l3: l3 {
 225                         regulator-min-microvolt = <1225000>;
 226                         regulator-max-microvolt = <1225000>;
 227                 };
 228
 229                 pm8941_l4: l4 {
 230                         regulator-min-microvolt = <1225000>;
 231                         regulator-max-microvolt = <1225000>;
 232                 };
 233
 234                 pm8941_l5: l5 {
 235                         regulator-min-microvolt = <1800000>;
 236                         regulator-max-microvolt = <1800000>;
 237                 };
 238
 239                 pm8941_l6: l6 {
 240                         regulator-min-microvolt = <1800000>;
 241                         regulator-max-microvolt = <1800000>;
 242                         regulator-boot-on;
 243                 };
 244
 245                 pm8941_l7: l7 {
 246                         regulator-min-microvolt = <1800000>;
 247                         regulator-max-microvolt = <1800000>;
 248                         regulator-boot-on;
 249                 };
 250
 251                 pm8941_l8: l8 {
 252                         regulator-min-microvolt = <1800000>;
 253                         regulator-max-microvolt = <1800000>;
 254                 };
 255
 256                 pm8941_l9: l9 {
 257                         regulator-min-microvolt = <1800000>;
 258                         regulator-max-microvolt = <2950000>;
 259                 };
 260
 261                 pm8941_l10: l10 {
 262                         regulator-min-microvolt = <1800000>;
 263                         regulator-max-microvolt = <2950000>;
 264                 };
 265
 266                 pm8941_l11: l11 {
 267                         regulator-min-microvolt = <1225000>;
 268                         regulator-max-microvolt = <1350000>;
 269                 };
 270
 271                 pm8941_l12: l12 {
 272                         regulator-min-microvolt = <1800000>;
 273                         regulator-max-microvolt = <1800000>;
 274                         regulator-always-on;
 275                         regulator-boot-on;
 276                 };
 277
 278                 pm8941_l13: l13 {
 279                         regulator-min-microvolt = <1800000>;
 280                         regulator-max-microvolt = <2950000>;
 281                         regulator-boot-on;
 282                 };
 283
 284                 pm8941_l14: l14 {
 285                         regulator-min-microvolt = <1800000>;
 286                         regulator-max-microvolt = <1800000>;
 287                 };
 288
 289                 pm8941_l15: l15 {
 290                         regulator-min-microvolt = <2050000>;
 291                         regulator-max-microvolt = <2050000>;
 292                 };
 293
 294                 pm8941_l16: l16 {
 295                         regulator-min-microvolt = <2700000>;
 296                         regulator-max-microvolt = <2700000>;
 297                 };
 298
 299                 pm8941_l17: l17 {
 300                         regulator-min-microvolt = <2850000>;
 301                         regulator-max-microvolt = <2850000>;
 302                 };
 303
 304                 pm8941_l18: l18 {
 305                         regulator-min-microvolt = <2850000>;
 306                         regulator-max-microvolt = <2850000>;
 307                 };
 308
 309                 pm8941_l19: l19 {
 310                         regulator-min-microvolt = <2900000>;
 311                         regulator-max-microvolt = <3350000>;
 312                 };
 313
 314                 pm8941_l20: l20 {
 315                         regulator-min-microvolt = <2950000>;
 316                         regulator-max-microvolt = <2950000>;
 317                         regulator-system-load = <200000>;
 318                         regulator-allow-set-load;
 319                         regulator-boot-on;
 320                 };
 321
 322                 pm8941_l21: l21 {
 323                         regulator-min-microvolt = <2950000>;
 324                         regulator-max-microvolt = <2950000>;
 325                         regulator-boot-on;
 326                 };
 327
 328                 pm8941_l22: l22 {
 329                         regulator-min-microvolt = <3000000>;
 330                         regulator-max-microvolt = <3300000>;
 331                 };
 332
 333                 pm8941_l23: l23 {
 334                         regulator-min-microvolt = <3000000>;
 335                         regulator-max-microvolt = <3000000>;
 336                 };
 337
 338                 pm8941_l24: l24 {
 339                         regulator-min-microvolt = <3075000>;
 340                         regulator-max-microvolt = <3075000>;
 341                         regulator-boot-on;
 342                 };
 343         };
 344 };
 345
 346 &sdhc_1 {
 347         status = "okay";
 348
 349         vmmc-supply = <&pm8941_l20>;
 350         vqmmc-supply = <&pm8941_s3>;
 351
 352         pinctrl-names = "default", "sleep";
 353         pinctrl-0 = <&sdc1_on>;
 354         pinctrl-1 = <&sdc1_off>;
 355 };
 356
 357 &sdhc_2 {
 358         status = "okay";
 359
 360         vmmc-supply = <&pm8941_l21>;
 361         vqmmc-supply = <&pm8941_l13>;
 362
 363         pinctrl-names = "default", "sleep";
 364         pinctrl-0 = <&sdc2_on>;
 365         pinctrl-1 = <&sdc2_off>;
 366 };
 367
 368 &smbb {
 369         usb-charge-current-limit = <1500000>;
 370         qcom,fast-charge-safe-current = <1500000>;
 371         qcom,fast-charge-current-limit = <1500000>;
 372         qcom,fast-charge-safe-voltage = <4380000>;
 373         qcom,fast-charge-high-threshold-voltage = <4350000>;
 374         qcom,auto-recharge-threshold-voltage = <4240000>;
 375         qcom,minimum-input-voltage = <4450000>;
 376 };
 377
 378 &tlmm {
 379         sdc1_on: sdc1-on {
 380                 clk {
 381                         pins = "sdc1_clk";
 382                         drive-strength = <16>;
 383                         bias-disable;
 384                 };
 385
 386                 cmd-data {
 387                         pins = "sdc1_cmd", "sdc1_data";
 388                         drive-strength = <10>;
 389                         bias-pull-up;
 390                 };
 391         };
 392
 393         sdc2_on: sdc2-on {
 394                 clk {
 395                         pins = "sdc2_clk";
 396                         drive-strength = <10>;
 397                         bias-disable;
 398                 };
 399
 400                 cmd-data {
 401                         pins = "sdc2_cmd", "sdc2_data";
 402                         drive-strength = <6>;
 403                         bias-pull-up;
 404                 };
 405         };
 406
 407         wcnss_pin_a: wcnss-pin-active {
 408                 wlan {
 409                         pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
 410                         function = "wlan";
 411
 412                         drive-strength = <6>;
 413                         bias-pull-down;
 414                 };
 415
 416                 bt {
 417                         pins = "gpio35", "gpio43", "gpio44";
 418                         function = "bt";
 419
 420                         drive-strength = <2>;
 421                         bias-pull-down;
 422                 };
 423
 424                 fm {
 425                         pins = "gpio41", "gpio42";
 426                         function = "fm";
 427
 428                         drive-strength = <2>;
 429                         bias-pull-down;
 430                 };
 431         };
 432 };