arch/arm/boot/dts/qcom-mdm9615.dtsi

   1 /*
   2  * Device Tree Source for Qualcomm MDM9615 SoC
   3  *
   4  * Copyright (C) 2016 BayLibre, SAS.
   5  * Author : Neil Armstrong <narmstrong@baylibre.com>
   6  *
   7  * This file is dual-licensed: you can use it either under the terms
   8  * of the GPL or the X11 license, at your option. Note that this dual
   9  * licensing only applies to this file, and not this project as a
  10  * whole.
  11  *
  12  *  a) This file is free software; you can redistribute it and/or
  13  *     modify it under the terms of the GNU General Public License as
  14  *     published by the Free Software Foundation; either version 2 of the
  15  *     License, or (at your option) any later version.
  16  *
  17  *     This file is distributed in the hope that it will be useful,
  18  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  *     GNU General Public License for more details.
  21  *
  22  * Or, alternatively,
  23  *
  24  *  b) Permission is hereby granted, free of charge, to any person
  25  *     obtaining a copy of this software and associated documentation
  26  *     files (the "Software"), to deal in the Software without
  27  *     restriction, including without limitation the rights to use,
  28  *     copy, modify, merge, publish, distribute, sublicense, and/or
  29  *     sell copies of the Software, and to permit persons to whom the
  30  *     Software is furnished to do so, subject to the following
  31  *     conditions:
  32  *
  33  *     The above copyright notice and this permission notice shall be
  34  *     included in all copies or substantial portions of the Software.
  35  *
  36  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  37  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  38  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  39  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  40  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  41  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  42  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  43  *     OTHER DEALINGS IN THE SOFTWARE.
  44  */
  45
  46 /dts-v1/;
  47
  48 #include <dt-bindings/interrupt-controller/arm-gic.h>
  49 #include <dt-bindings/clock/qcom,gcc-mdm9615.h>
  50 #include <dt-bindings/reset/qcom,gcc-mdm9615.h>
  51 #include <dt-bindings/mfd/qcom-rpm.h>
  52 #include <dt-bindings/soc/qcom,gsbi.h>
  53
  54 / {
  55         #address-cells = <1>;
  56         #size-cells = <1>;
  57         model = "Qualcomm MDM9615";
  58         compatible = "qcom,mdm9615";
  59         interrupt-parent = <&intc>;
  60
  61         cpus {
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64
  65                 cpu0: cpu@0 {
  66                         compatible = "arm,cortex-a5";
  67                         device_type = "cpu";
  68                         next-level-cache = <&L2>;
  69                 };
  70         };
  71
  72         cpu-pmu {
  73                 compatible = "arm,cortex-a5-pmu";
  74                 interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
  75         };
  76
  77         clocks {
  78                 cxo_board {
  79                         compatible = "fixed-clock";
  80                         #clock-cells = <0>;
  81                         clock-frequency = <19200000>;
  82                 };
  83         };
  84
  85         vsdcc_fixed: vsdcc-regulator {
  86                 compatible = "regulator-fixed";
  87                 regulator-name = "SDCC Power";
  88                 regulator-min-microvolt = <2700000>;
  89                 regulator-max-microvolt = <2700000>;
  90                 regulator-always-on;
  91         };
  92
  93         soc: soc {
  94                 #address-cells = <1>;
  95                 #size-cells = <1>;
  96                 ranges;
  97                 compatible = "simple-bus";
  98
  99                 L2: cache-controller@2040000 {
 100                         compatible = "arm,pl310-cache";
 101                         reg = <0x02040000 0x1000>;
 102                         arm,data-latency = <2 2 0>;
 103                         cache-unified;
 104                         cache-level = <2>;
 105                 };
 106
 107                 intc: interrupt-controller@2000000 {
 108                         compatible = "qcom,msm-qgic2";
 109                         interrupt-controller;
 110                         #interrupt-cells = <3>;
 111                         reg = <0x02000000 0x1000>,
 112                               <0x02002000 0x1000>;
 113                 };
 114
 115                 timer@200a000 {
 116                         compatible = "qcom,kpss-timer", "qcom,msm-timer";
 117                         interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
 118                                      <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
 119                                      <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
 120                         reg = <0x0200a000 0x100>;
 121                         clock-frequency = <27000000>,
 122                                           <32768>;
 123                         cpu-offset = <0x80000>;
 124                 };
 125
 126                 msmgpio: pinctrl@800000 {
 127                         compatible = "qcom,mdm9615-pinctrl";
 128                         gpio-controller;
 129                         gpio-ranges = <&msmgpio 0 0 88>;
 130                         #gpio-cells = <2>;
 131                         interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 132                         interrupt-controller;
 133                         #interrupt-cells = <2>;
 134                         reg = <0x800000 0x4000>;
 135                 };
 136
 137                 gcc: clock-controller@900000 {
 138                         compatible = "qcom,gcc-mdm9615";
 139                         #clock-cells = <1>;
 140                         #power-domain-cells = <1>;
 141                         #reset-cells = <1>;
 142                         reg = <0x900000 0x4000>;
 143                 };
 144
 145                 lcc: clock-controller@28000000 {
 146                         compatible = "qcom,lcc-mdm9615";
 147                         reg = <0x28000000 0x1000>;
 148                         #clock-cells = <1>;
 149                         #reset-cells = <1>;
 150                 };
 151
 152                 l2cc: clock-controller@2011000 {
 153                         compatible = "qcom,kpss-gcc", "syscon";
 154                         reg = <0x02011000 0x1000>;
 155                 };
 156
 157                 rng@1a500000 {
 158                         compatible = "qcom,prng";
 159                         reg = <0x1a500000 0x200>;
 160                         clocks = <&gcc PRNG_CLK>;
 161                         clock-names = "core";
 162                         assigned-clocks = <&gcc PRNG_CLK>;
 163                         assigned-clock-rates = <32000000>;
 164                 };
 165
 166                 gsbi2: gsbi@16100000 {
 167                         compatible = "qcom,gsbi-v1.0.0";
 168                         cell-index = <2>;
 169                         reg = <0x16100000 0x100>;
 170                         clocks = <&gcc GSBI2_H_CLK>;
 171                         clock-names = "iface";
 172                         status = "disabled";
 173                         #address-cells = <1>;
 174                         #size-cells = <1>;
 175                         ranges;
 176
 177                         gsbi2_i2c: i2c@16180000 {
 178                                 compatible = "qcom,i2c-qup-v1.1.1";
 179                                 #address-cells = <1>;
 180                                 #size-cells = <0>;
 181                                 reg = <0x16180000 0x1000>;
 182                                 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 183
 184                                 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 185                                 clock-names = "core", "iface";
 186                                 status = "disabled";
 187                         };
 188                 };
 189
 190                 gsbi3: gsbi@16200000 {
 191                         compatible = "qcom,gsbi-v1.0.0";
 192                         cell-index = <3>;
 193                         reg = <0x16200000 0x100>;
 194                         clocks = <&gcc GSBI3_H_CLK>;
 195                         clock-names = "iface";
 196                         status = "disabled";
 197                         #address-cells = <1>;
 198                         #size-cells = <1>;
 199                         ranges;
 200
 201                         gsbi3_spi: spi@16280000 {
 202                                 compatible = "qcom,spi-qup-v1.1.1";
 203                                 #address-cells = <1>;
 204                                 #size-cells = <0>;
 205                                 reg = <0x16280000 0x1000>;
 206                                 interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 207                                 spi-max-frequency = <24000000>;
 208
 209                                 clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
 210                                 clock-names = "core", "iface";
 211                                 status = "disabled";
 212                         };
 213                 };
 214
 215                 gsbi4: gsbi@16300000 {
 216                         compatible = "qcom,gsbi-v1.0.0";
 217                         cell-index = <4>;
 218                         reg = <0x16300000 0x100>;
 219                         clocks = <&gcc GSBI4_H_CLK>;
 220                         clock-names = "iface";
 221                         status = "disabled";
 222                         #address-cells = <1>;
 223                         #size-cells = <1>;
 224                         ranges;
 225
 226                         syscon-tcsr = <&tcsr>;
 227
 228                         gsbi4_serial: serial@16340000 {
 229                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 230                                 reg = <0x16340000 0x1000>,
 231                                       <0x16300000 0x1000>;
 232                                 interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 233                                 clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
 234                                 clock-names = "core", "iface";
 235                                 status = "disabled";
 236                         };
 237                 };
 238
 239                 gsbi5: gsbi@16400000 {
 240                         compatible = "qcom,gsbi-v1.0.0";
 241                         cell-index = <5>;
 242                         reg = <0x16400000 0x100>;
 243                         clocks = <&gcc GSBI5_H_CLK>;
 244                         clock-names = "iface";
 245                         status = "disabled";
 246                         #address-cells = <1>;
 247                         #size-cells = <1>;
 248                         ranges;
 249
 250                         syscon-tcsr = <&tcsr>;
 251
 252                         gsbi5_i2c: i2c@16480000 {
 253                                 compatible = "qcom,i2c-qup-v1.1.1";
 254                                 #address-cells = <1>;
 255                                 #size-cells = <0>;
 256                                 reg = <0x16480000 0x1000>;
 257                                 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 258
 259                                 /* QUP clock is not initialized, set rate */
 260                                 assigned-clocks = <&gcc GSBI5_QUP_CLK>;
 261                                 assigned-clock-rates = <24000000>;
 262
 263                                 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 264                                 clock-names = "core", "iface";
 265                                 status = "disabled";
 266                         };
 267
 268                         gsbi5_serial: serial@16440000 {
 269                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 270                                 reg = <0x16440000 0x1000>,
 271                                       <0x16400000 0x1000>;
 272                                 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 273                                 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 274                                 clock-names = "core", "iface";
 275                                 status = "disabled";
 276                         };
 277                 };
 278
 279                 qcom,ssbi@500000 {
 280                         compatible = "qcom,ssbi";
 281                         reg = <0x500000 0x1000>;
 282                         qcom,controller-type = "pmic-arbiter";
 283
 284                         pmicintc: pmic@0 {
 285                                 compatible = "qcom,pm8018", "qcom,pm8921";
 286                                 interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
 287                                 #interrupt-cells = <2>;
 288                                 interrupt-controller;
 289                                 #address-cells = <1>;
 290                                 #size-cells = <0>;
 291
 292                                 pwrkey@1c {
 293                                         compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
 294                                         reg = <0x1c>;
 295                                         interrupt-parent = <&pmicintc>;
 296                                         interrupts = <50 IRQ_TYPE_EDGE_RISING>,
 297                                                      <51 IRQ_TYPE_EDGE_RISING>;
 298                                         debounce = <15625>;
 299                                         pull-up;
 300                                 };
 301
 302                                 pmicmpp: mpps@50 {
 303                                         compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
 304                                         interrupt-controller;
 305                                         #interrupt-cells = <2>;
 306                                         reg = <0x50>;
 307                                         gpio-controller;
 308                                         #gpio-cells = <2>;
 309                                         gpio-ranges = <&pmicmpp 0 0 6>;
 310                                 };
 311
 312                                 rtc@11d {
 313                                         compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
 314                                         interrupt-parent = <&pmicintc>;
 315                                         interrupts = <39 IRQ_TYPE_EDGE_RISING>;
 316                                         reg = <0x11d>;
 317                                         allow-set-time;
 318                                 };
 319
 320                                 pmicgpio: gpio@150 {
 321                                         compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
 322                                         reg = <0x150>;
 323                                         interrupt-controller;
 324                                         #interrupt-cells = <2>;
 325                                         gpio-controller;
 326                                         gpio-ranges = <&pmicgpio 0 0 6>;
 327                                         #gpio-cells = <2>;
 328                                 };
 329                         };
 330                 };
 331
 332                 sdcc1bam: dma-controller@12182000{
 333                         compatible = "qcom,bam-v1.3.0";
 334                         reg = <0x12182000 0x8000>;
 335                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 336                         clocks = <&gcc SDC1_H_CLK>;
 337                         clock-names = "bam_clk";
 338                         #dma-cells = <1>;
 339                         qcom,ee = <0>;
 340                 };
 341
 342                 sdcc2bam: dma-controller@12142000{
 343                         compatible = "qcom,bam-v1.3.0";
 344                         reg = <0x12142000 0x8000>;
 345                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 346                         clocks = <&gcc SDC2_H_CLK>;
 347                         clock-names = "bam_clk";
 348                         #dma-cells = <1>;
 349                         qcom,ee = <0>;
 350                 };
 351
 352                 amba {
 353                         compatible = "simple-bus";
 354                         #address-cells = <1>;
 355                         #size-cells = <1>;
 356                         ranges;
 357                         sdcc1: mmc@12180000 {
 358                                 status = "disabled";
 359                                 compatible = "arm,pl18x", "arm,primecell";
 360                                 arm,primecell-periphid = <0x00051180>;
 361                                 reg = <0x12180000 0x2000>;
 362                                 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 363                                 interrupt-names = "cmd_irq";
 364                                 clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 365                                 clock-names = "mclk", "apb_pclk";
 366                                 bus-width = <8>;
 367                                 max-frequency = <48000000>;
 368                                 cap-sd-highspeed;
 369                                 cap-mmc-highspeed;
 370                                 vmmc-supply = <&vsdcc_fixed>;
 371                                 dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
 372                                 dma-names = "tx", "rx";
 373                                 assigned-clocks = <&gcc SDC1_CLK>;
 374                                 assigned-clock-rates = <400000>;
 375                         };
 376
 377                         sdcc2: mmc@12140000 {
 378                                 compatible = "arm,pl18x", "arm,primecell";
 379                                 arm,primecell-periphid = <0x00051180>;
 380                                 status = "disabled";
 381                                 reg = <0x12140000 0x2000>;
 382                                 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 383                                 interrupt-names = "cmd_irq";
 384                                 clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
 385                                 clock-names = "mclk", "apb_pclk";
 386                                 bus-width = <4>;
 387                                 cap-sd-highspeed;
 388                                 cap-mmc-highspeed;
 389                                 max-frequency = <48000000>;
 390                                 no-1-8-v;
 391                                 vmmc-supply = <&vsdcc_fixed>;
 392                                 dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
 393                                 dma-names = "tx", "rx";
 394                                 assigned-clocks = <&gcc SDC2_CLK>;
 395                                 assigned-clock-rates = <400000>;
 396                         };
 397                 };
 398
 399                 tcsr: syscon@1a400000 {
 400                         compatible = "qcom,tcsr-mdm9615", "syscon";
 401                         reg = <0x1a400000 0x100>;
 402                 };
 403
 404                 rpm: rpm@108000 {
 405                         compatible = "qcom,rpm-mdm9615";
 406                         reg = <0x108000 0x1000>;
 407
 408                         qcom,ipc = <&l2cc 0x8 2>;
 409
 410                         interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
 411                                      <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 412                                      <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 413                         interrupt-names = "ack", "err", "wakeup";
 414
 415                         regulators {
 416                                 compatible = "qcom,rpm-pm8018-regulators";
 417
 418                                 vin_lvs1-supply = <&pm8018_s3>;
 419
 420                                 vdd_l7-supply = <&pm8018_s4>;
 421                                 vdd_l8-supply = <&pm8018_s3>;
 422                                 vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
 423
 424                                 /* Buck SMPS */
 425                                 pm8018_s1: s1 {
 426                                         regulator-min-microvolt = <500000>;
 427                                         regulator-max-microvolt = <1150000>;
 428                                         qcom,switch-mode-frequency = <1600000>;
 429                                         bias-pull-down;
 430                                 };
 431
 432                                 pm8018_s2: s2 {
 433                                         regulator-min-microvolt = <1225000>;
 434                                         regulator-max-microvolt = <1300000>;
 435                                         qcom,switch-mode-frequency = <1600000>;
 436                                         bias-pull-down;
 437                                 };
 438
 439                                 pm8018_s3: s3 {
 440                                         regulator-always-on;
 441                                         regulator-min-microvolt = <1800000>;
 442                                         regulator-max-microvolt = <1800000>;
 443                                         qcom,switch-mode-frequency = <1600000>;
 444                                         bias-pull-down;
 445                                 };
 446
 447                                 pm8018_s4: s4 {
 448                                         regulator-min-microvolt = <2100000>;
 449                                         regulator-max-microvolt = <2200000>;
 450                                         qcom,switch-mode-frequency = <1600000>;
 451                                         bias-pull-down;
 452                                 };
 453
 454                                 pm8018_s5: s5 {
 455                                         regulator-always-on;
 456                                         regulator-min-microvolt = <1350000>;
 457                                         regulator-max-microvolt = <1350000>;
 458                                         qcom,switch-mode-frequency = <1600000>;
 459                                         bias-pull-down;
 460                                 };
 461
 462                                 /* PMOS LDO */
 463                                 pm8018_l2: l2 {
 464                                         regulator-always-on;
 465                                         regulator-min-microvolt = <1800000>;
 466                                         regulator-max-microvolt = <1800000>;
 467                                         bias-pull-down;
 468                                 };
 469
 470                                 pm8018_l3: l3 {
 471                                         regulator-always-on;
 472                                         regulator-min-microvolt = <1800000>;
 473                                         regulator-max-microvolt = <1800000>;
 474                                         bias-pull-down;
 475                                 };
 476
 477                                 pm8018_l4: l4 {
 478                                         regulator-min-microvolt = <3300000>;
 479                                         regulator-max-microvolt = <3300000>;
 480                                         bias-pull-down;
 481                                 };
 482
 483                                 pm8018_l5: l5 {
 484                                         regulator-min-microvolt = <2850000>;
 485                                         regulator-max-microvolt = <2850000>;
 486                                         bias-pull-down;
 487                                 };
 488
 489                                 pm8018_l6: l6 {
 490                                         regulator-min-microvolt = <1800000>;
 491                                         regulator-max-microvolt = <2850000>;
 492                                         bias-pull-down;
 493                                 };
 494
 495                                 pm8018_l7: l7 {
 496                                         regulator-min-microvolt = <1850000>;
 497                                         regulator-max-microvolt = <1900000>;
 498                                         bias-pull-down;
 499                                 };
 500
 501                                 pm8018_l8: l8 {
 502                                         regulator-min-microvolt = <1200000>;
 503                                         regulator-max-microvolt = <1200000>;
 504                                         bias-pull-down;
 505                                 };
 506
 507                                 pm8018_l9: l9 {
 508                                         regulator-min-microvolt = <750000>;
 509                                         regulator-max-microvolt = <1150000>;
 510                                         bias-pull-down;
 511                                 };
 512
 513                                 pm8018_l10: l10 {
 514                                         regulator-min-microvolt = <1050000>;
 515                                         regulator-max-microvolt = <1050000>;
 516                                         bias-pull-down;
 517                                 };
 518
 519                                 pm8018_l11: l11 {
 520                                         regulator-min-microvolt = <1050000>;
 521                                         regulator-max-microvolt = <1050000>;
 522                                         bias-pull-down;
 523                                 };
 524
 525                                 pm8018_l12: l12 {
 526                                         regulator-min-microvolt = <1050000>;
 527                                         regulator-max-microvolt = <1050000>;
 528                                         bias-pull-down;
 529                                 };
 530
 531                                 pm8018_l13: l13 {
 532                                         regulator-min-microvolt = <1850000>;
 533                                         regulator-max-microvolt = <2950000>;
 534                                         bias-pull-down;
 535                                 };
 536
 537                                 pm8018_l14: l14 {
 538                                         regulator-min-microvolt = <2850000>;
 539                                         regulator-max-microvolt = <2850000>;
 540                                         bias-pull-down;
 541                                 };
 542
 543                                 /* Low Voltage Switch */
 544                                 pm8018_lvs1: lvs1 {
 545                                         bias-pull-down;
 546                                 };
 547                         };
 548                 };
 549         };
 550 };