arch/arm/boot/dts/qcom-apq8064.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
   5 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
   6 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
   7 #include <dt-bindings/clock/qcom,rpmcc.h>
   8 #include <dt-bindings/soc/qcom,gsbi.h>
   9 #include <dt-bindings/interrupt-controller/irq.h>
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 / {
  12         #address-cells = <1>;
  13         #size-cells = <1>;
  14         model = "Qualcomm APQ8064";
  15         compatible = "qcom,apq8064";
  16         interrupt-parent = <&intc>;
  17
  18         reserved-memory {
  19                 #address-cells = <1>;
  20                 #size-cells = <1>;
  21                 ranges;
  22
  23                 smem_region: smem@80000000 {
  24                         reg = <0x80000000 0x200000>;
  25                         no-map;
  26                 };
  27
  28                 wcnss_mem: wcnss@8f000000 {
  29                         reg = <0x8f000000 0x700000>;
  30                         no-map;
  31                 };
  32         };
  33
  34         cpus {
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37
  38                 CPU0: cpu@0 {
  39                         compatible = "qcom,krait";
  40                         enable-method = "qcom,kpss-acc-v1";
  41                         device_type = "cpu";
  42                         reg = <0>;
  43                         next-level-cache = <&L2>;
  44                         qcom,acc = <&acc0>;
  45                         qcom,saw = <&saw0>;
  46                         cpu-idle-states = <&CPU_SPC>;
  47                 };
  48
  49                 CPU1: cpu@1 {
  50                         compatible = "qcom,krait";
  51                         enable-method = "qcom,kpss-acc-v1";
  52                         device_type = "cpu";
  53                         reg = <1>;
  54                         next-level-cache = <&L2>;
  55                         qcom,acc = <&acc1>;
  56                         qcom,saw = <&saw1>;
  57                         cpu-idle-states = <&CPU_SPC>;
  58                 };
  59
  60                 CPU2: cpu@2 {
  61                         compatible = "qcom,krait";
  62                         enable-method = "qcom,kpss-acc-v1";
  63                         device_type = "cpu";
  64                         reg = <2>;
  65                         next-level-cache = <&L2>;
  66                         qcom,acc = <&acc2>;
  67                         qcom,saw = <&saw2>;
  68                         cpu-idle-states = <&CPU_SPC>;
  69                 };
  70
  71                 CPU3: cpu@3 {
  72                         compatible = "qcom,krait";
  73                         enable-method = "qcom,kpss-acc-v1";
  74                         device_type = "cpu";
  75                         reg = <3>;
  76                         next-level-cache = <&L2>;
  77                         qcom,acc = <&acc3>;
  78                         qcom,saw = <&saw3>;
  79                         cpu-idle-states = <&CPU_SPC>;
  80                 };
  81
  82                 L2: l2-cache {
  83                         compatible = "cache";
  84                         cache-level = <2>;
  85                 };
  86
  87                 idle-states {
  88                         CPU_SPC: spc {
  89                                 compatible = "qcom,idle-state-spc",
  90                                                 "arm,idle-state";
  91                                 entry-latency-us = <400>;
  92                                 exit-latency-us = <900>;
  93                                 min-residency-us = <3000>;
  94                         };
  95                 };
  96         };
  97
  98         memory {
  99                 device_type = "memory";
 100                 reg = <0x0 0x0>;
 101         };
 102
 103         thermal-zones {
 104                 cpu-thermal0 {
 105                         polling-delay-passive = <250>;
 106                         polling-delay = <1000>;
 107
 108                         thermal-sensors = <&gcc 7>;
 109                         coefficients = <1199 0>;
 110
 111                         trips {
 112                                 cpu_alert0: trip0 {
 113                                         temperature = <75000>;
 114                                         hysteresis = <2000>;
 115                                         type = "passive";
 116                                 };
 117                                 cpu_crit0: trip1 {
 118                                         temperature = <110000>;
 119                                         hysteresis = <2000>;
 120                                         type = "critical";
 121                                 };
 122                         };
 123                 };
 124
 125                 cpu-thermal1 {
 126                         polling-delay-passive = <250>;
 127                         polling-delay = <1000>;
 128
 129                         thermal-sensors = <&gcc 8>;
 130                         coefficients = <1132 0>;
 131
 132                         trips {
 133                                 cpu_alert1: trip0 {
 134                                         temperature = <75000>;
 135                                         hysteresis = <2000>;
 136                                         type = "passive";
 137                                 };
 138                                 cpu_crit1: trip1 {
 139                                         temperature = <110000>;
 140                                         hysteresis = <2000>;
 141                                         type = "critical";
 142                                 };
 143                         };
 144                 };
 145
 146                 cpu-thermal2 {
 147                         polling-delay-passive = <250>;
 148                         polling-delay = <1000>;
 149
 150                         thermal-sensors = <&gcc 9>;
 151                         coefficients = <1199 0>;
 152
 153                         trips {
 154                                 cpu_alert2: trip0 {
 155                                         temperature = <75000>;
 156                                         hysteresis = <2000>;
 157                                         type = "passive";
 158                                 };
 159                                 cpu_crit2: trip1 {
 160                                         temperature = <110000>;
 161                                         hysteresis = <2000>;
 162                                         type = "critical";
 163                                 };
 164                         };
 165                 };
 166
 167                 cpu-thermal3 {
 168                         polling-delay-passive = <250>;
 169                         polling-delay = <1000>;
 170
 171                         thermal-sensors = <&gcc 10>;
 172                         coefficients = <1132 0>;
 173
 174                         trips {
 175                                 cpu_alert3: trip0 {
 176                                         temperature = <75000>;
 177                                         hysteresis = <2000>;
 178                                         type = "passive";
 179                                 };
 180                                 cpu_crit3: trip1 {
 181                                         temperature = <110000>;
 182                                         hysteresis = <2000>;
 183                                         type = "critical";
 184                                 };
 185                         };
 186                 };
 187         };
 188
 189         cpu-pmu {
 190                 compatible = "qcom,krait-pmu";
 191                 interrupts = <1 10 0x304>;
 192         };
 193
 194         clocks {
 195                 cxo_board: cxo_board {
 196                         compatible = "fixed-clock";
 197                         #clock-cells = <0>;
 198                         clock-frequency = <19200000>;
 199                 };
 200
 201                 pxo_board: pxo_board {
 202                         compatible = "fixed-clock";
 203                         #clock-cells = <0>;
 204                         clock-frequency = <27000000>;
 205                 };
 206
 207                 sleep_clk: sleep_clk {
 208                         compatible = "fixed-clock";
 209                         #clock-cells = <0>;
 210                         clock-frequency = <32768>;
 211                 };
 212         };
 213
 214         sfpb_mutex: hwmutex {
 215                 compatible = "qcom,sfpb-mutex";
 216                 syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
 217                 #hwlock-cells = <1>;
 218         };
 219
 220         smem {
 221                 compatible = "qcom,smem";
 222                 memory-region = <&smem_region>;
 223
 224                 hwlocks = <&sfpb_mutex 3>;
 225         };
 226
 227         smd {
 228                 compatible = "qcom,smd";
 229
 230                 modem@0 {
 231                         interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
 232
 233                         qcom,ipc = <&l2cc 8 3>;
 234                         qcom,smd-edge = <0>;
 235
 236                         status = "disabled";
 237                 };
 238
 239                 q6@1 {
 240                         interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
 241
 242                         qcom,ipc = <&l2cc 8 15>;
 243                         qcom,smd-edge = <1>;
 244
 245                         status = "disabled";
 246                 };
 247
 248                 dsps@3 {
 249                         interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
 250
 251                         qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
 252                         qcom,smd-edge = <3>;
 253
 254                         status = "disabled";
 255                 };
 256
 257                 riva@6 {
 258                         interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
 259
 260                         qcom,ipc = <&l2cc 8 25>;
 261                         qcom,smd-edge = <6>;
 262
 263                         status = "disabled";
 264                 };
 265         };
 266
 267         smsm {
 268                 compatible = "qcom,smsm";
 269
 270                 #address-cells = <1>;
 271                 #size-cells = <0>;
 272
 273                 qcom,ipc-1 = <&l2cc 8 4>;
 274                 qcom,ipc-2 = <&l2cc 8 14>;
 275                 qcom,ipc-3 = <&l2cc 8 23>;
 276                 qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
 277
 278                 apps_smsm: apps@0 {
 279                         reg = <0>;
 280                         #qcom,smem-state-cells = <1>;
 281                 };
 282
 283                 modem_smsm: modem@1 {
 284                         reg = <1>;
 285                         interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
 286
 287                         interrupt-controller;
 288                         #interrupt-cells = <2>;
 289                 };
 290
 291                 q6_smsm: q6@2 {
 292                         reg = <2>;
 293                         interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
 294
 295                         interrupt-controller;
 296                         #interrupt-cells = <2>;
 297                 };
 298
 299                 wcnss_smsm: wcnss@3 {
 300                         reg = <3>;
 301                         interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
 302
 303                         interrupt-controller;
 304                         #interrupt-cells = <2>;
 305                 };
 306
 307                 dsps_smsm: dsps@4 {
 308                         reg = <4>;
 309                         interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
 310
 311                         interrupt-controller;
 312                         #interrupt-cells = <2>;
 313                 };
 314         };
 315
 316         firmware {
 317                 scm {
 318                         compatible = "qcom,scm-apq8064";
 319
 320                         clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
 321                         clock-names = "core";
 322                 };
 323         };
 324
 325
 326         /*
 327          * These channels from the ADC are simply hardware monitors.
 328          * That is why the ADC is referred to as "HKADC" - HouseKeeping
 329          * ADC.
 330          */
 331         iio-hwmon {
 332                 compatible = "iio-hwmon";
 333                 io-channels = <&xoadc 0x00 0x01>, /* Battery */
 334                             <&xoadc 0x00 0x02>, /* DC in (charger) */
 335                             <&xoadc 0x00 0x04>, /* VPH the main system voltage */
 336                             <&xoadc 0x00 0x0b>, /* Die temperature */
 337                             <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
 338                             <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
 339                             <&xoadc 0x00 0x0e>; /* Charger temperature */
 340         };
 341
 342         soc: soc {
 343                 #address-cells = <1>;
 344                 #size-cells = <1>;
 345                 ranges;
 346                 compatible = "simple-bus";
 347
 348                 tlmm_pinmux: pinctrl@800000 {
 349                         compatible = "qcom,apq8064-pinctrl";
 350                         reg = <0x800000 0x4000>;
 351
 352                         gpio-controller;
 353                         #gpio-cells = <2>;
 354                         interrupt-controller;
 355                         #interrupt-cells = <2>;
 356                         interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
 357
 358                         pinctrl-names = "default";
 359                         pinctrl-0 = <&ps_hold>;
 360                 };
 361
 362                 sfpb_wrapper_mutex: syscon@1200000 {
 363                         compatible = "syscon";
 364                         reg = <0x01200000 0x8000>;
 365                 };
 366
 367                 intc: interrupt-controller@2000000 {
 368                         compatible = "qcom,msm-qgic2";
 369                         interrupt-controller;
 370                         #interrupt-cells = <3>;
 371                         reg = <0x02000000 0x1000>,
 372                               <0x02002000 0x1000>;
 373                 };
 374
 375                 timer@200a000 {
 376                         compatible = "qcom,kpss-timer",
 377                                      "qcom,kpss-wdt-apq8064", "qcom,msm-timer";
 378                         interrupts = <1 1 0x301>,
 379                                      <1 2 0x301>,
 380                                      <1 3 0x301>;
 381                         reg = <0x0200a000 0x100>;
 382                         clock-frequency = <27000000>,
 383                                           <32768>;
 384                         cpu-offset = <0x80000>;
 385                 };
 386
 387                 acc0: clock-controller@2088000 {
 388                         compatible = "qcom,kpss-acc-v1";
 389                         reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
 390                 };
 391
 392                 acc1: clock-controller@2098000 {
 393                         compatible = "qcom,kpss-acc-v1";
 394                         reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 395                 };
 396
 397                 acc2: clock-controller@20a8000 {
 398                         compatible = "qcom,kpss-acc-v1";
 399                         reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
 400                 };
 401
 402                 acc3: clock-controller@20b8000 {
 403                         compatible = "qcom,kpss-acc-v1";
 404                         reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
 405                 };
 406
 407                 saw0: power-controller@2089000 {
 408                         compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 409                         reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 410                         regulator;
 411                 };
 412
 413                 saw1: power-controller@2099000 {
 414                         compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 415                         reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 416                         regulator;
 417                 };
 418
 419                 saw2: power-controller@20a9000 {
 420                         compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 421                         reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
 422                         regulator;
 423                 };
 424
 425                 saw3: power-controller@20b9000 {
 426                         compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 427                         reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
 428                         regulator;
 429                 };
 430
 431                 sps_sic_non_secure: sps-sic-non-secure@12100000 {
 432                         compatible      = "syscon";
 433                         reg             = <0x12100000 0x10000>;
 434                 };
 435
 436                 gsbi1: gsbi@12440000 {
 437                         status = "disabled";
 438                         compatible = "qcom,gsbi-v1.0.0";
 439                         cell-index = <1>;
 440                         reg = <0x12440000 0x100>;
 441                         clocks = <&gcc GSBI1_H_CLK>;
 442                         clock-names = "iface";
 443                         #address-cells = <1>;
 444                         #size-cells = <1>;
 445                         ranges;
 446
 447                         syscon-tcsr = <&tcsr>;
 448
 449                         gsbi1_serial: serial@12450000 {
 450                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 451                                 reg = <0x12450000 0x100>,
 452                                       <0x12400000 0x03>;
 453                                 interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
 454                                 clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
 455                                 clock-names = "core", "iface";
 456                                 status = "disabled";
 457                         };
 458
 459                         gsbi1_i2c: i2c@12460000 {
 460                                 compatible = "qcom,i2c-qup-v1.1.1";
 461                                 pinctrl-0 = <&i2c1_pins>;
 462                                 pinctrl-1 = <&i2c1_pins_sleep>;
 463                                 pinctrl-names = "default", "sleep";
 464                                 reg = <0x12460000 0x1000>;
 465                                 interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
 466                                 clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
 467                                 clock-names = "core", "iface";
 468                                 #address-cells = <1>;
 469                                 #size-cells = <0>;
 470                                 status = "disabled";
 471                         };
 472
 473                 };
 474
 475                 gsbi2: gsbi@12480000 {
 476                         status = "disabled";
 477                         compatible = "qcom,gsbi-v1.0.0";
 478                         cell-index = <2>;
 479                         reg = <0x12480000 0x100>;
 480                         clocks = <&gcc GSBI2_H_CLK>;
 481                         clock-names = "iface";
 482                         #address-cells = <1>;
 483                         #size-cells = <1>;
 484                         ranges;
 485
 486                         syscon-tcsr = <&tcsr>;
 487
 488                         gsbi2_i2c: i2c@124a0000 {
 489                                 compatible = "qcom,i2c-qup-v1.1.1";
 490                                 reg = <0x124a0000 0x1000>;
 491                                 pinctrl-0 = <&i2c2_pins>;
 492                                 pinctrl-1 = <&i2c2_pins_sleep>;
 493                                 pinctrl-names = "default", "sleep";
 494                                 interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
 495                                 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 496                                 clock-names = "core", "iface";
 497                                 #address-cells = <1>;
 498                                 #size-cells = <0>;
 499                                 status = "disabled";
 500                         };
 501                 };
 502
 503                 gsbi3: gsbi@16200000 {
 504                         status = "disabled";
 505                         compatible = "qcom,gsbi-v1.0.0";
 506                         cell-index = <3>;
 507                         reg = <0x16200000 0x100>;
 508                         clocks = <&gcc GSBI3_H_CLK>;
 509                         clock-names = "iface";
 510                         #address-cells = <1>;
 511                         #size-cells = <1>;
 512                         ranges;
 513                         gsbi3_i2c: i2c@16280000 {
 514                                 compatible = "qcom,i2c-qup-v1.1.1";
 515                                 pinctrl-0 = <&i2c3_pins>;
 516                                 pinctrl-1 = <&i2c3_pins_sleep>;
 517                                 pinctrl-names = "default", "sleep";
 518                                 reg = <0x16280000 0x1000>;
 519                                 interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 520                                 clocks = <&gcc GSBI3_QUP_CLK>,
 521                                          <&gcc GSBI3_H_CLK>;
 522                                 clock-names = "core", "iface";
 523                                 #address-cells = <1>;
 524                                 #size-cells = <0>;
 525                                 status = "disabled";
 526                         };
 527                 };
 528
 529                 gsbi4: gsbi@16300000 {
 530                         status = "disabled";
 531                         compatible = "qcom,gsbi-v1.0.0";
 532                         cell-index = <4>;
 533                         reg = <0x16300000 0x03>;
 534                         clocks = <&gcc GSBI4_H_CLK>;
 535                         clock-names = "iface";
 536                         #address-cells = <1>;
 537                         #size-cells = <1>;
 538                         ranges;
 539
 540                         gsbi4_i2c: i2c@16380000 {
 541                                 compatible = "qcom,i2c-qup-v1.1.1";
 542                                 pinctrl-0 = <&i2c4_pins>;
 543                                 pinctrl-1 = <&i2c4_pins_sleep>;
 544                                 pinctrl-names = "default", "sleep";
 545                                 reg = <0x16380000 0x1000>;
 546                                 interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 547                                 clocks = <&gcc GSBI4_QUP_CLK>,
 548                                          <&gcc GSBI4_H_CLK>;
 549                                 clock-names = "core", "iface";
 550                                 status = "disabled";
 551                         };
 552                 };
 553
 554                 gsbi5: gsbi@1a200000 {
 555                         status = "disabled";
 556                         compatible = "qcom,gsbi-v1.0.0";
 557                         cell-index = <5>;
 558                         reg = <0x1a200000 0x03>;
 559                         clocks = <&gcc GSBI5_H_CLK>;
 560                         clock-names = "iface";
 561                         #address-cells = <1>;
 562                         #size-cells = <1>;
 563                         ranges;
 564
 565                         gsbi5_serial: serial@1a240000 {
 566                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 567                                 reg = <0x1a240000 0x100>,
 568                                       <0x1a200000 0x03>;
 569                                 interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
 570                                 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 571                                 clock-names = "core", "iface";
 572                                 status = "disabled";
 573                         };
 574
 575                         gsbi5_spi: spi@1a280000 {
 576                                 compatible = "qcom,spi-qup-v1.1.1";
 577                                 reg = <0x1a280000 0x1000>;
 578                                 interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
 579                                 pinctrl-0 = <&spi5_default>;
 580                                 pinctrl-1 = <&spi5_sleep>;
 581                                 pinctrl-names = "default", "sleep";
 582                                 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 583                                 clock-names = "core", "iface";
 584                                 status = "disabled";
 585                                 #address-cells = <1>;
 586                                 #size-cells = <0>;
 587                         };
 588                 };
 589
 590                 gsbi6: gsbi@16500000 {
 591                         status = "disabled";
 592                         compatible = "qcom,gsbi-v1.0.0";
 593                         cell-index = <6>;
 594                         reg = <0x16500000 0x03>;
 595                         clocks = <&gcc GSBI6_H_CLK>;
 596                         clock-names = "iface";
 597                         #address-cells = <1>;
 598                         #size-cells = <1>;
 599                         ranges;
 600
 601                         gsbi6_serial: serial@16540000 {
 602                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 603                                 reg = <0x16540000 0x100>,
 604                                       <0x16500000 0x03>;
 605                                 interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 606                                 clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
 607                                 clock-names = "core", "iface";
 608                                 status = "disabled";
 609                         };
 610
 611                         gsbi6_i2c: i2c@16580000 {
 612                                 compatible = "qcom,i2c-qup-v1.1.1";
 613                                 pinctrl-0 = <&i2c6_pins>;
 614                                 pinctrl-1 = <&i2c6_pins_sleep>;
 615                                 pinctrl-names = "default", "sleep";
 616                                 reg = <0x16580000 0x1000>;
 617                                 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 618                                 clocks = <&gcc GSBI6_QUP_CLK>,
 619                                          <&gcc GSBI6_H_CLK>;
 620                                 clock-names = "core", "iface";
 621                                 status = "disabled";
 622                         };
 623                 };
 624
 625                 gsbi7: gsbi@16600000 {
 626                         status = "disabled";
 627                         compatible = "qcom,gsbi-v1.0.0";
 628                         cell-index = <7>;
 629                         reg = <0x16600000 0x100>;
 630                         clocks = <&gcc GSBI7_H_CLK>;
 631                         clock-names = "iface";
 632                         #address-cells = <1>;
 633                         #size-cells = <1>;
 634                         ranges;
 635                         syscon-tcsr = <&tcsr>;
 636
 637                         gsbi7_serial: serial@16640000 {
 638                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 639                                 reg = <0x16640000 0x1000>,
 640                                       <0x16600000 0x1000>;
 641                                 interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
 642                                 clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
 643                                 clock-names = "core", "iface";
 644                                 status = "disabled";
 645                         };
 646
 647                         gsbi7_i2c: i2c@16680000 {
 648                                 compatible = "qcom,i2c-qup-v1.1.1";
 649                                 pinctrl-0 = <&i2c7_pins>;
 650                                 pinctrl-1 = <&i2c7_pins_sleep>;
 651                                 pinctrl-names = "default", "sleep";
 652                                 reg = <0x16680000 0x1000>;
 653                                 interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 654                                 clocks = <&gcc GSBI7_QUP_CLK>,
 655                                          <&gcc GSBI7_H_CLK>;
 656                                 clock-names = "core", "iface";
 657                                 status = "disabled";
 658                         };
 659                 };
 660
 661                 rng@1a500000 {
 662                         compatible = "qcom,prng";
 663                         reg = <0x1a500000 0x200>;
 664                         clocks = <&gcc PRNG_CLK>;
 665                         clock-names = "core";
 666                 };
 667
 668                 ssbi@c00000 {
 669                         compatible = "qcom,ssbi";
 670                         reg = <0x00c00000 0x1000>;
 671                         qcom,controller-type = "pmic-arbiter";
 672
 673                         pm8821: pmic@1 {
 674                                 compatible = "qcom,pm8821";
 675                                 interrupt-parent = <&tlmm_pinmux>;
 676                                 interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
 677                                 #interrupt-cells = <2>;
 678                                 interrupt-controller;
 679                                 #address-cells = <1>;
 680                                 #size-cells = <0>;
 681
 682                                 pm8821_mpps: mpps@50 {
 683                                         compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
 684                                         reg = <0x50>;
 685                                         interrupts = <24 IRQ_TYPE_NONE>,
 686                                                      <25 IRQ_TYPE_NONE>,
 687                                                      <26 IRQ_TYPE_NONE>,
 688                                                      <27 IRQ_TYPE_NONE>;
 689                                         gpio-controller;
 690                                         #gpio-cells = <2>;
 691                                 };
 692                         };
 693                 };
 694
 695                 qcom,ssbi@500000 {
 696                         compatible = "qcom,ssbi";
 697                         reg = <0x00500000 0x1000>;
 698                         qcom,controller-type = "pmic-arbiter";
 699
 700                         pmicintc: pmic@0 {
 701                                 compatible = "qcom,pm8921";
 702                                 interrupt-parent = <&tlmm_pinmux>;
 703                                 interrupts = <74 8>;
 704                                 #interrupt-cells = <2>;
 705                                 interrupt-controller;
 706                                 #address-cells = <1>;
 707                                 #size-cells = <0>;
 708
 709                                 pm8921_gpio: gpio@150 {
 710
 711                                         compatible = "qcom,pm8921-gpio",
 712                                                      "qcom,ssbi-gpio";
 713                                         reg = <0x150>;
 714                                         interrupt-controller;
 715                                         #interrupt-cells = <2>;
 716                                         gpio-controller;
 717                                         gpio-ranges = <&pm8921_gpio 0 0 44>;
 718                                         #gpio-cells = <2>;
 719
 720                                 };
 721
 722                                 pm8921_mpps: mpps@50 {
 723                                         compatible = "qcom,pm8921-mpp",
 724                                                      "qcom,ssbi-mpp";
 725                                         reg = <0x50>;
 726                                         gpio-controller;
 727                                         #gpio-cells = <2>;
 728                                         interrupts =
 729                                         <128 IRQ_TYPE_NONE>,
 730                                         <129 IRQ_TYPE_NONE>,
 731                                         <130 IRQ_TYPE_NONE>,
 732                                         <131 IRQ_TYPE_NONE>,
 733                                         <132 IRQ_TYPE_NONE>,
 734                                         <133 IRQ_TYPE_NONE>,
 735                                         <134 IRQ_TYPE_NONE>,
 736                                         <135 IRQ_TYPE_NONE>,
 737                                         <136 IRQ_TYPE_NONE>,
 738                                         <137 IRQ_TYPE_NONE>,
 739                                         <138 IRQ_TYPE_NONE>,
 740                                         <139 IRQ_TYPE_NONE>;
 741                                 };
 742
 743                                 rtc@11d {
 744                                         compatible = "qcom,pm8921-rtc";
 745                                         interrupt-parent = <&pmicintc>;
 746                                         interrupts = <39 1>;
 747                                         reg = <0x11d>;
 748                                         allow-set-time;
 749                                 };
 750
 751                                 pwrkey@1c {
 752                                         compatible = "qcom,pm8921-pwrkey";
 753                                         reg = <0x1c>;
 754                                         interrupt-parent = <&pmicintc>;
 755                                         interrupts = <50 1>, <51 1>;
 756                                         debounce = <15625>;
 757                                         pull-up;
 758                                 };
 759
 760                                 xoadc: xoadc@197 {
 761                                         compatible = "qcom,pm8921-adc";
 762                                         reg = <0x197>;
 763                                         interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
 764                                         #address-cells = <2>;
 765                                         #size-cells = <0>;
 766                                         #io-channel-cells = <2>;
 767
 768                                         vcoin: adc-channel@00 {
 769                                                 reg = <0x00 0x00>;
 770                                         };
 771                                         vbat: adc-channel@01 {
 772                                                 reg = <0x00 0x01>;
 773                                         };
 774                                         dcin: adc-channel@02 {
 775                                                 reg = <0x00 0x02>;
 776                                         };
 777                                         vph_pwr: adc-channel@04 {
 778                                                 reg = <0x00 0x04>;
 779                                         };
 780                                         batt_therm: adc-channel@08 {
 781                                                 reg = <0x00 0x08>;
 782                                         };
 783                                         batt_id: adc-channel@09 {
 784                                                 reg = <0x00 0x09>;
 785                                         };
 786                                         usb_vbus: adc-channel@0a {
 787                                                 reg = <0x00 0x0a>;
 788                                         };
 789                                         die_temp: adc-channel@0b {
 790                                                 reg = <0x00 0x0b>;
 791                                         };
 792                                         ref_625mv: adc-channel@0c {
 793                                                 reg = <0x00 0x0c>;
 794                                         };
 795                                         ref_1250mv: adc-channel@0d {
 796                                                 reg = <0x00 0x0d>;
 797                                         };
 798                                         chg_temp: adc-channel@0e {
 799                                                 reg = <0x00 0x0e>;
 800                                         };
 801                                         ref_muxoff: adc-channel@0f {
 802                                                 reg = <0x00 0x0f>;
 803                                         };
 804                                 };
 805                         };
 806                 };
 807
 808                 qfprom: qfprom@700000 {
 809                         compatible      = "qcom,qfprom";
 810                         reg             = <0x00700000 0x1000>;
 811                         #address-cells  = <1>;
 812                         #size-cells     = <1>;
 813                         ranges;
 814                         tsens_calib: calib {
 815                                 reg = <0x404 0x10>;
 816                         };
 817                         tsens_backup: backup_calib {
 818                                 reg = <0x414 0x10>;
 819                         };
 820                 };
 821
 822                 gcc: clock-controller@900000 {
 823                         compatible = "qcom,gcc-apq8064";
 824                         reg = <0x00900000 0x4000>;
 825                         nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 826                         nvmem-cell-names = "calib", "calib_backup";
 827                         #clock-cells = <1>;
 828                         #reset-cells = <1>;
 829                         #thermal-sensor-cells = <1>;
 830                 };
 831
 832                 lcc: clock-controller@28000000 {
 833                         compatible = "qcom,lcc-apq8064";
 834                         reg = <0x28000000 0x1000>;
 835                         #clock-cells = <1>;
 836                         #reset-cells = <1>;
 837                 };
 838
 839                 mmcc: clock-controller@4000000 {
 840                         compatible = "qcom,mmcc-apq8064";
 841                         reg = <0x4000000 0x1000>;
 842                         #clock-cells = <1>;
 843                         #reset-cells = <1>;
 844                 };
 845
 846                 l2cc: clock-controller@2011000 {
 847                         compatible      = "syscon";
 848                         reg             = <0x2011000 0x1000>;
 849                 };
 850
 851                 rpm@108000 {
 852                         compatible      = "qcom,rpm-apq8064";
 853                         reg             = <0x108000 0x1000>;
 854                         qcom,ipc        = <&l2cc 0x8 2>;
 855
 856                         interrupts      = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
 857                                           <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 858                                           <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 859                         interrupt-names = "ack", "err", "wakeup";
 860
 861                         rpmcc: clock-controller {
 862                                 compatible      = "qcom,rpmcc-apq8064", "qcom,rpmcc";
 863                                 #clock-cells = <1>;
 864                         };
 865
 866                         regulators {
 867                                 compatible = "qcom,rpm-pm8921-regulators";
 868
 869                                 pm8921_s1: s1 {};
 870                                 pm8921_s2: s2 {};
 871                                 pm8921_s3: s3 {};
 872                                 pm8921_s4: s4 {};
 873                                 pm8921_s7: s7 {};
 874                                 pm8921_s8: s8 {};
 875
 876                                 pm8921_l1: l1 {};
 877                                 pm8921_l2: l2 {};
 878                                 pm8921_l3: l3 {};
 879                                 pm8921_l4: l4 {};
 880                                 pm8921_l5: l5 {};
 881                                 pm8921_l6: l6 {};
 882                                 pm8921_l7: l7 {};
 883                                 pm8921_l8: l8 {};
 884                                 pm8921_l9: l9 {};
 885                                 pm8921_l10: l10 {};
 886                                 pm8921_l11: l11 {};
 887                                 pm8921_l12: l12 {};
 888                                 pm8921_l14: l14 {};
 889                                 pm8921_l15: l15 {};
 890                                 pm8921_l16: l16 {};
 891                                 pm8921_l17: l17 {};
 892                                 pm8921_l18: l18 {};
 893                                 pm8921_l21: l21 {};
 894                                 pm8921_l22: l22 {};
 895                                 pm8921_l23: l23 {};
 896                                 pm8921_l24: l24 {};
 897                                 pm8921_l25: l25 {};
 898                                 pm8921_l26: l26 {};
 899                                 pm8921_l27: l27 {};
 900                                 pm8921_l28: l28 {};
 901                                 pm8921_l29: l29 {};
 902
 903                                 pm8921_lvs1: lvs1 {};
 904                                 pm8921_lvs2: lvs2 {};
 905                                 pm8921_lvs3: lvs3 {};
 906                                 pm8921_lvs4: lvs4 {};
 907                                 pm8921_lvs5: lvs5 {};
 908                                 pm8921_lvs6: lvs6 {};
 909                                 pm8921_lvs7: lvs7 {};
 910
 911                                 pm8921_usb_switch: usb-switch {};
 912
 913                                 pm8921_hdmi_switch: hdmi-switch {
 914                                         bias-pull-down;
 915                                 };
 916
 917                                 pm8921_ncp: ncp {};
 918                         };
 919                 };
 920
 921                 usb1: usb@12500000 {
 922                         compatible = "qcom,ci-hdrc";
 923                         reg = <0x12500000 0x200>,
 924                               <0x12500200 0x200>;
 925                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 926                         clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
 927                         clock-names = "core", "iface";
 928                         assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
 929                         assigned-clock-rates = <60000000>;
 930                         resets = <&gcc USB_HS1_RESET>;
 931                         reset-names = "core";
 932                         phy_type = "ulpi";
 933                         ahb-burst-config = <0>;
 934                         phys = <&usb_hs1_phy>;
 935                         phy-names = "usb-phy";
 936                         status = "disabled";
 937                         #reset-cells = <1>;
 938
 939                         ulpi {
 940                                 usb_hs1_phy: phy {
 941                                         compatible = "qcom,usb-hs-phy-apq8064",
 942                                                      "qcom,usb-hs-phy";
 943                                         clocks = <&sleep_clk>, <&cxo_board>;
 944                                         clock-names = "sleep", "ref";
 945                                         resets = <&usb1 0>;
 946                                         reset-names = "por";
 947                                         #phy-cells = <0>;
 948                                 };
 949                         };
 950                 };
 951
 952                 usb3: usb@12520000 {
 953                         compatible = "qcom,ci-hdrc";
 954                         reg = <0x12520000 0x200>,
 955                               <0x12520200 0x200>;
 956                         interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 957                         clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
 958                         clock-names = "core", "iface";
 959                         assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
 960                         assigned-clock-rates = <60000000>;
 961                         resets = <&gcc USB_HS3_RESET>;
 962                         reset-names = "core";
 963                         phy_type = "ulpi";
 964                         ahb-burst-config = <0>;
 965                         phys = <&usb_hs3_phy>;
 966                         phy-names = "usb-phy";
 967                         status = "disabled";
 968                         #reset-cells = <1>;
 969
 970                         ulpi {
 971                                 usb_hs3_phy: phy {
 972                                         compatible = "qcom,usb-hs-phy-apq8064",
 973                                                      "qcom,usb-hs-phy";
 974                                         #phy-cells = <0>;
 975                                         clocks = <&sleep_clk>, <&cxo_board>;
 976                                         clock-names = "sleep", "ref";
 977                                         resets = <&usb3 0>;
 978                                         reset-names = "por";
 979                                 };
 980                         };
 981                 };
 982
 983                 usb4: usb@12530000 {
 984                         compatible = "qcom,ci-hdrc";
 985                         reg = <0x12530000 0x200>,
 986                               <0x12530200 0x200>;
 987                         interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 988                         clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
 989                         clock-names = "core", "iface";
 990                         assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
 991                         assigned-clock-rates = <60000000>;
 992                         resets = <&gcc USB_HS4_RESET>;
 993                         reset-names = "core";
 994                         phy_type = "ulpi";
 995                         ahb-burst-config = <0>;
 996                         phys = <&usb_hs4_phy>;
 997                         phy-names = "usb-phy";
 998                         status = "disabled";
 999                         #reset-cells = <1>;
1000
1001                         ulpi {
1002                                 usb_hs4_phy: phy {
1003                                         compatible = "qcom,usb-hs-phy-apq8064",
1004                                                      "qcom,usb-hs-phy";
1005                                         #phy-cells = <0>;
1006                                         clocks = <&sleep_clk>, <&cxo_board>;
1007                                         clock-names = "sleep", "ref";
1008                                         resets = <&usb4 0>;
1009                                         reset-names = "por";
1010                                 };
1011                         };
1012                 };
1013
1014                 sata_phy0: phy@1b400000 {
1015                         compatible      = "qcom,apq8064-sata-phy";
1016                         status          = "disabled";
1017                         reg             = <0x1b400000 0x200>;
1018                         reg-names       = "phy_mem";
1019                         clocks          = <&gcc SATA_PHY_CFG_CLK>;
1020                         clock-names     = "cfg";
1021                         #phy-cells      = <0>;
1022                 };
1023
1024                 sata0: sata@29000000 {
1025                         compatible              = "qcom,apq8064-ahci", "generic-ahci";
1026                         status                  = "disabled";
1027                         reg                     = <0x29000000 0x180>;
1028                         interrupts              = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
1029
1030                         clocks                  = <&gcc SFAB_SATA_S_H_CLK>,
1031                                                 <&gcc SATA_H_CLK>,
1032                                                 <&gcc SATA_A_CLK>,
1033                                                 <&gcc SATA_RXOOB_CLK>,
1034                                                 <&gcc SATA_PMALIVE_CLK>;
1035                         clock-names             = "slave_iface",
1036                                                 "iface",
1037                                                 "bus",
1038                                                 "rxoob",
1039                                                 "core_pmalive";
1040
1041                         assigned-clocks         = <&gcc SATA_RXOOB_CLK>,
1042                                                 <&gcc SATA_PMALIVE_CLK>;
1043                         assigned-clock-rates    = <100000000>, <100000000>;
1044
1045                         phys                    = <&sata_phy0>;
1046                         phy-names               = "sata-phy";
1047                         ports-implemented       = <0x1>;
1048                 };
1049
1050                 /* Temporary fixed regulator */
1051                 sdcc1bam:dma@12402000{
1052                         compatible = "qcom,bam-v1.3.0";
1053                         reg = <0x12402000 0x8000>;
1054                         interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
1055                         clocks = <&gcc SDC1_H_CLK>;
1056                         clock-names = "bam_clk";
1057                         #dma-cells = <1>;
1058                         qcom,ee = <0>;
1059                 };
1060
1061                 sdcc3bam:dma@12182000{
1062                         compatible = "qcom,bam-v1.3.0";
1063                         reg = <0x12182000 0x8000>;
1064                         interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
1065                         clocks = <&gcc SDC3_H_CLK>;
1066                         clock-names = "bam_clk";
1067                         #dma-cells = <1>;
1068                         qcom,ee = <0>;
1069                 };
1070
1071                 sdcc4bam:dma@121c2000{
1072                         compatible = "qcom,bam-v1.3.0";
1073                         reg = <0x121c2000 0x8000>;
1074                         interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
1075                         clocks = <&gcc SDC4_H_CLK>;
1076                         clock-names = "bam_clk";
1077                         #dma-cells = <1>;
1078                         qcom,ee = <0>;
1079                 };
1080
1081                 amba {
1082                         compatible = "simple-bus";
1083                         #address-cells = <1>;
1084                         #size-cells = <1>;
1085                         ranges;
1086                         sdcc1: sdcc@12400000 {
1087                                 status          = "disabled";
1088                                 compatible      = "arm,pl18x", "arm,primecell";
1089                                 pinctrl-names   = "default";
1090                                 pinctrl-0       = <&sdcc1_pins>;
1091                                 arm,primecell-periphid = <0x00051180>;
1092                                 reg             = <0x12400000 0x2000>;
1093                                 interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
1094                                 interrupt-names = "cmd_irq";
1095                                 clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
1096                                 clock-names     = "mclk", "apb_pclk";
1097                                 bus-width       = <8>;
1098                                 max-frequency   = <96000000>;
1099                                 non-removable;
1100                                 cap-sd-highspeed;
1101                                 cap-mmc-highspeed;
1102                                 dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
1103                                 dma-names = "tx", "rx";
1104                         };
1105
1106                         sdcc3: sdcc@12180000 {
1107                                 compatible      = "arm,pl18x", "arm,primecell";
1108                                 arm,primecell-periphid = <0x00051180>;
1109                                 status          = "disabled";
1110                                 reg             = <0x12180000 0x2000>;
1111                                 interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
1112                                 interrupt-names = "cmd_irq";
1113                                 clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
1114                                 clock-names     = "mclk", "apb_pclk";
1115                                 bus-width       = <4>;
1116                                 cap-sd-highspeed;
1117                                 cap-mmc-highspeed;
1118                                 max-frequency   = <192000000>;
1119                                 no-1-8-v;
1120                                 dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
1121                                 dma-names = "tx", "rx";
1122                         };
1123
1124                         sdcc4: sdcc@121c0000 {
1125                                 compatible      = "arm,pl18x", "arm,primecell";
1126                                 arm,primecell-periphid = <0x00051180>;
1127                                 status          = "disabled";
1128                                 reg             = <0x121c0000 0x2000>;
1129                                 interrupts      = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1130                                 interrupt-names = "cmd_irq";
1131                                 clocks          = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
1132                                 clock-names     = "mclk", "apb_pclk";
1133                                 bus-width       = <4>;
1134                                 cap-sd-highspeed;
1135                                 cap-mmc-highspeed;
1136                                 max-frequency   = <48000000>;
1137                                 dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
1138                                 dma-names = "tx", "rx";
1139                                 pinctrl-names = "default";
1140                                 pinctrl-0 = <&sdc4_gpios>;
1141                         };
1142                 };
1143
1144                 tcsr: syscon@1a400000 {
1145                         compatible = "qcom,tcsr-apq8064", "syscon";
1146                         reg = <0x1a400000 0x100>;
1147                 };
1148
1149                 gpu: adreno-3xx@4300000 {
1150                         compatible = "qcom,adreno-320.2", "qcom,adreno";
1151                         reg = <0x04300000 0x20000>;
1152                         reg-names = "kgsl_3d0_reg_memory";
1153                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1154                         interrupt-names = "kgsl_3d0_irq";
1155                         clock-names =
1156                             "core_clk",
1157                             "iface_clk",
1158                             "mem_clk",
1159                             "mem_iface_clk";
1160                         clocks =
1161                             <&mmcc GFX3D_CLK>,
1162                             <&mmcc GFX3D_AHB_CLK>,
1163                             <&mmcc GFX3D_AXI_CLK>,
1164                             <&mmcc MMSS_IMEM_AHB_CLK>;
1165
1166                         iommus = <&gfx3d 0
1167                                   &gfx3d 1
1168                                   &gfx3d 2
1169                                   &gfx3d 3
1170                                   &gfx3d 4
1171                                   &gfx3d 5
1172                                   &gfx3d 6
1173                                   &gfx3d 7
1174                                   &gfx3d 8
1175                                   &gfx3d 9
1176                                   &gfx3d 10
1177                                   &gfx3d 11
1178                                   &gfx3d 12
1179                                   &gfx3d 13
1180                                   &gfx3d 14
1181                                   &gfx3d 15
1182                                   &gfx3d 16
1183                                   &gfx3d 17
1184                                   &gfx3d 18
1185                                   &gfx3d 19
1186                                   &gfx3d 20
1187                                   &gfx3d 21
1188                                   &gfx3d 22
1189                                   &gfx3d 23
1190                                   &gfx3d 24
1191                                   &gfx3d 25
1192                                   &gfx3d 26
1193                                   &gfx3d 27
1194                                   &gfx3d 28
1195                                   &gfx3d 29
1196                                   &gfx3d 30
1197                                   &gfx3d 31
1198                                   &gfx3d1 0
1199                                   &gfx3d1 1
1200                                   &gfx3d1 2
1201                                   &gfx3d1 3
1202                                   &gfx3d1 4
1203                                   &gfx3d1 5
1204                                   &gfx3d1 6
1205                                   &gfx3d1 7
1206                                   &gfx3d1 8
1207                                   &gfx3d1 9
1208                                   &gfx3d1 10
1209                                   &gfx3d1 11
1210                                   &gfx3d1 12
1211                                   &gfx3d1 13
1212                                   &gfx3d1 14
1213                                   &gfx3d1 15
1214                                   &gfx3d1 16
1215                                   &gfx3d1 17
1216                                   &gfx3d1 18
1217                                   &gfx3d1 19
1218                                   &gfx3d1 20
1219                                   &gfx3d1 21
1220                                   &gfx3d1 22
1221                                   &gfx3d1 23
1222                                   &gfx3d1 24
1223                                   &gfx3d1 25
1224                                   &gfx3d1 26
1225                                   &gfx3d1 27
1226                                   &gfx3d1 28
1227                                   &gfx3d1 29
1228                                   &gfx3d1 30
1229                                   &gfx3d1 31>;
1230
1231                         qcom,gpu-pwrlevels {
1232                                 compatible = "qcom,gpu-pwrlevels";
1233                                 qcom,gpu-pwrlevel@0 {
1234                                         qcom,gpu-freq = <450000000>;
1235                                 };
1236                                 qcom,gpu-pwrlevel@1 {
1237                                         qcom,gpu-freq = <27000000>;
1238                                 };
1239                         };
1240                 };
1241
1242                 mmss_sfpb: syscon@5700000 {
1243                         compatible = "syscon";
1244                         reg = <0x5700000 0x70>;
1245                 };
1246
1247                 dsi0: mdss_dsi@4700000 {
1248                         compatible = "qcom,mdss-dsi-ctrl";
1249                         label = "MDSS DSI CTRL->0";
1250                         #address-cells = <1>;
1251                         #size-cells = <0>;
1252                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
1253                         reg = <0x04700000 0x200>;
1254                         reg-names = "dsi_ctrl";
1255
1256                         clocks = <&mmcc DSI_M_AHB_CLK>,
1257                                 <&mmcc DSI_S_AHB_CLK>,
1258                                 <&mmcc AMP_AHB_CLK>,
1259                                 <&mmcc DSI_CLK>,
1260                                 <&mmcc DSI1_BYTE_CLK>,
1261                                 <&mmcc DSI_PIXEL_CLK>,
1262                                 <&mmcc DSI1_ESC_CLK>;
1263                         clock-names = "iface", "bus", "core_mmss",
1264                                         "src", "byte", "pixel",
1265                                         "core";
1266
1267                         assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
1268                                         <&mmcc DSI1_ESC_SRC>,
1269                                         <&mmcc DSI_SRC>,
1270                                         <&mmcc DSI_PIXEL_SRC>;
1271                         assigned-clock-parents = <&dsi0_phy 0>,
1272                                                 <&dsi0_phy 0>,
1273                                                 <&dsi0_phy 1>,
1274                                                 <&dsi0_phy 1>;
1275                         syscon-sfpb = <&mmss_sfpb>;
1276                         phys = <&dsi0_phy>;
1277                         ports {
1278                                 #address-cells = <1>;
1279                                 #size-cells = <0>;
1280
1281                                 port@0 {
1282                                         reg = <0>;
1283                                         dsi0_in: endpoint {
1284                                         };
1285                                 };
1286
1287                                 port@1 {
1288                                         reg = <1>;
1289                                         dsi0_out: endpoint {
1290                                         };
1291                                 };
1292                         };
1293                 };
1294
1295
1296                 dsi0_phy: dsi-phy@4700200 {
1297                         compatible = "qcom,dsi-phy-28nm-8960";
1298                         #clock-cells = <1>;
1299                         #phy-cells = <0>;
1300
1301                         reg = <0x04700200 0x100>,
1302                                 <0x04700300 0x200>,
1303                                 <0x04700500 0x5c>;
1304                         reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
1305                         clock-names = "iface_clk", "ref";
1306                         clocks = <&mmcc DSI_M_AHB_CLK>,
1307                                  <&pxo_board>;
1308                 };
1309
1310
1311                 mdp_port0: iommu@7500000 {
1312                         compatible = "qcom,apq8064-iommu";
1313                         #iommu-cells = <1>;
1314                         clock-names =
1315                             "smmu_pclk",
1316                             "iommu_clk";
1317                         clocks =
1318                             <&mmcc SMMU_AHB_CLK>,
1319                             <&mmcc MDP_AXI_CLK>;
1320                         reg = <0x07500000 0x100000>;
1321                         interrupts =
1322                             <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
1323                             <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
1324                         qcom,ncb = <2>;
1325                 };
1326
1327                 mdp_port1: iommu@7600000 {
1328                         compatible = "qcom,apq8064-iommu";
1329                         #iommu-cells = <1>;
1330                         clock-names =
1331                             "smmu_pclk",
1332                             "iommu_clk";
1333                         clocks =
1334                             <&mmcc SMMU_AHB_CLK>,
1335                             <&mmcc MDP_AXI_CLK>;
1336                         reg = <0x07600000 0x100000>;
1337                         interrupts =
1338                             <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
1339                             <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
1340                         qcom,ncb = <2>;
1341                 };
1342
1343                 gfx3d: iommu@7c00000 {
1344                         compatible = "qcom,apq8064-iommu";
1345                         #iommu-cells = <1>;
1346                         clock-names =
1347                             "smmu_pclk",
1348                             "iommu_clk";
1349                         clocks =
1350                             <&mmcc SMMU_AHB_CLK>,
1351                             <&mmcc GFX3D_AXI_CLK>;
1352                         reg = <0x07c00000 0x100000>;
1353                         interrupts =
1354                             <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
1355                             <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
1356                         qcom,ncb = <3>;
1357                 };
1358
1359                 gfx3d1: iommu@7d00000 {
1360                         compatible = "qcom,apq8064-iommu";
1361                         #iommu-cells = <1>;
1362                         clock-names =
1363                             "smmu_pclk",
1364                             "iommu_clk";
1365                         clocks =
1366                             <&mmcc SMMU_AHB_CLK>,
1367                             <&mmcc GFX3D_AXI_CLK>;
1368                         reg = <0x07d00000 0x100000>;
1369                         interrupts =
1370                             <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
1371                             <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
1372                         qcom,ncb = <3>;
1373                 };
1374
1375                 pcie: pci@1b500000 {
1376                         compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
1377                         reg = <0x1b500000 0x1000
1378                                0x1b502000 0x80
1379                                0x1b600000 0x100
1380                                0x0ff00000 0x100000>;
1381                         reg-names = "dbi", "elbi", "parf", "config";
1382                         device_type = "pci";
1383                         linux,pci-domain = <0>;
1384                         bus-range = <0x00 0xff>;
1385                         num-lanes = <1>;
1386                         #address-cells = <3>;
1387                         #size-cells = <2>;
1388                         ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
1389                                   0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */
1390                         interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
1391                         interrupt-names = "msi";
1392                         #interrupt-cells = <1>;
1393                         interrupt-map-mask = <0 0 0 0x7>;
1394                         interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1395                                         <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1396                                         <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1397                                         <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1398                         clocks = <&gcc PCIE_A_CLK>,
1399                                  <&gcc PCIE_H_CLK>,
1400                                  <&gcc PCIE_PHY_REF_CLK>;
1401                         clock-names = "core", "iface", "phy";
1402                         resets = <&gcc PCIE_ACLK_RESET>,
1403                                  <&gcc PCIE_HCLK_RESET>,
1404                                  <&gcc PCIE_POR_RESET>,
1405                                  <&gcc PCIE_PCI_RESET>,
1406                                  <&gcc PCIE_PHY_RESET>;
1407                         reset-names = "axi", "ahb", "por", "pci", "phy";
1408                         status = "disabled";
1409                 };
1410
1411                 hdmi: hdmi-tx@4a00000 {
1412                         compatible = "qcom,hdmi-tx-8960";
1413                         pinctrl-names = "default";
1414                         pinctrl-0 = <&hdmi_pinctrl>;
1415                         reg = <0x04a00000 0x2f0>;
1416                         reg-names = "core_physical";
1417                         interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
1418                         clocks = <&mmcc HDMI_APP_CLK>,
1419                                  <&mmcc HDMI_M_AHB_CLK>,
1420                                  <&mmcc HDMI_S_AHB_CLK>;
1421                         clock-names = "core_clk",
1422                                       "master_iface_clk",
1423                                       "slave_iface_clk";
1424
1425                         phys = <&hdmi_phy>;
1426                         phy-names = "hdmi-phy";
1427
1428                         ports {
1429                                 #address-cells = <1>;
1430                                 #size-cells = <0>;
1431
1432                                 port@0 {
1433                                         reg = <0>;
1434                                         hdmi_in: endpoint {
1435                                         };
1436                                 };
1437
1438                                 port@1 {
1439                                         reg = <1>;
1440                                         hdmi_out: endpoint {
1441                                         };
1442                                 };
1443                         };
1444                 };
1445
1446                 hdmi_phy: hdmi-phy@4a00400 {
1447                         compatible = "qcom,hdmi-phy-8960";
1448                         reg = <0x4a00400 0x60>,
1449                               <0x4a00500 0x100>;
1450                         reg-names = "hdmi_phy",
1451                                     "hdmi_pll";
1452
1453                         clocks = <&mmcc HDMI_S_AHB_CLK>;
1454                         clock-names = "slave_iface_clk";
1455                         #phy-cells = <0>;
1456                 };
1457
1458                 mdp: mdp@5100000 {
1459                         compatible = "qcom,mdp4";
1460                         reg = <0x05100000 0xf0000>;
1461                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
1462                         clocks = <&mmcc MDP_CLK>,
1463                                  <&mmcc MDP_AHB_CLK>,
1464                                  <&mmcc MDP_AXI_CLK>,
1465                                  <&mmcc MDP_LUT_CLK>,
1466                                  <&mmcc HDMI_TV_CLK>,
1467                                  <&mmcc MDP_TV_CLK>;
1468                         clock-names = "core_clk",
1469                                       "iface_clk",
1470                                       "bus_clk",
1471                                       "lut_clk",
1472                                       "hdmi_clk",
1473                                       "tv_clk";
1474
1475                         iommus = <&mdp_port0 0
1476                                   &mdp_port0 2
1477                                   &mdp_port1 0
1478                                   &mdp_port1 2>;
1479
1480                         ports {
1481                                 #address-cells = <1>;
1482                                 #size-cells = <0>;
1483
1484                                 port@0 {
1485                                         reg = <0>;
1486                                         mdp_lvds_out: endpoint {
1487                                         };
1488                                 };
1489
1490                                 port@1 {
1491                                         reg = <1>;
1492                                         mdp_dsi1_out: endpoint {
1493                                         };
1494                                 };
1495
1496                                 port@2 {
1497                                         reg = <2>;
1498                                         mdp_dsi2_out: endpoint {
1499                                         };
1500                                 };
1501
1502                                 port@3 {
1503                                         reg = <3>;
1504                                         mdp_dtv_out: endpoint {
1505                                         };
1506                                 };
1507                         };
1508                 };
1509
1510                 riva: riva-pil@3204000 {
1511                         compatible = "qcom,riva-pil";
1512
1513                         reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
1514                         reg-names = "ccu", "dxe", "pmu";
1515
1516                         interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
1517                                               <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
1518                         interrupt-names = "wdog", "fatal";
1519
1520                         memory-region = <&wcnss_mem>;
1521
1522                         vddcx-supply = <&pm8921_s3>;
1523                         vddmx-supply = <&pm8921_l24>;
1524                         vddpx-supply = <&pm8921_s4>;
1525
1526                         status = "disabled";
1527
1528                         iris {
1529                                 compatible = "qcom,wcn3660";
1530
1531                                 clocks = <&cxo_board>;
1532                                 clock-names = "xo";
1533
1534                                 vddxo-supply = <&pm8921_l4>;
1535                                 vddrfa-supply = <&pm8921_s2>;
1536                                 vddpa-supply = <&pm8921_l10>;
1537                                 vdddig-supply = <&pm8921_lvs2>;
1538                         };
1539
1540                         smd-edge {
1541                                 interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
1542
1543                                 qcom,ipc = <&l2cc 8 25>;
1544                                 qcom,smd-edge = <6>;
1545
1546                                 label = "riva";
1547
1548                                 wcnss {
1549                                         compatible = "qcom,wcnss";
1550                                         qcom,smd-channels = "WCNSS_CTRL";
1551
1552                                         qcom,mmio = <&riva>;
1553
1554                                         bt {
1555                                                 compatible = "qcom,wcnss-bt";
1556                                         };
1557
1558                                         wifi {
1559                                                 compatible = "qcom,wcnss-wlan";
1560
1561                                                 interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
1562                                                              <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
1563                                                 interrupt-names = "tx", "rx";
1564
1565                                                 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
1566                                                 qcom,smem-state-names = "tx-enable", "tx-rings-empty";
1567                                         };
1568                                 };
1569                         };
1570                 };
1571
1572                 etb@1a01000 {
1573                         compatible = "arm,coresight-etb10", "arm,primecell";
1574                         reg = <0x1a01000 0x1000>;
1575
1576                         clocks = <&rpmcc RPM_QDSS_CLK>;
1577                         clock-names = "apb_pclk";
1578
1579                         in-ports {
1580                                 port {
1581                                         etb_in: endpoint {
1582                                                 remote-endpoint = <&replicator_out0>;
1583                                         };
1584                                 };
1585                         };
1586                 };
1587
1588                 tpiu@1a03000 {
1589                         compatible = "arm,coresight-tpiu", "arm,primecell";
1590                         reg = <0x1a03000 0x1000>;
1591
1592                         clocks = <&rpmcc RPM_QDSS_CLK>;
1593                         clock-names = "apb_pclk";
1594
1595                         in-ports {
1596                                 port {
1597                                         tpiu_in: endpoint {
1598                                                 remote-endpoint = <&replicator_out1>;
1599                                         };
1600                                 };
1601                         };
1602                 };
1603
1604                 replicator {
1605                         compatible = "arm,coresight-static-replicator";
1606
1607                         clocks = <&rpmcc RPM_QDSS_CLK>;
1608                         clock-names = "apb_pclk";
1609
1610                         out-ports {
1611                                 #address-cells = <1>;
1612                                 #size-cells = <0>;
1613
1614                                 port@0 {
1615                                         reg = <0>;
1616                                         replicator_out0: endpoint {
1617                                                 remote-endpoint = <&etb_in>;
1618                                         };
1619                                 };
1620                                 port@1 {
1621                                         reg = <1>;
1622                                         replicator_out1: endpoint {
1623                                                 remote-endpoint = <&tpiu_in>;
1624                                         };
1625                                 };
1626                         };
1627
1628                         in-ports {
1629                                 port {
1630                                         replicator_in: endpoint {
1631                                                 remote-endpoint = <&funnel_out>;
1632                                         };
1633                                 };
1634                         };
1635                 };
1636
1637                 funnel@1a04000 {
1638                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1639                         reg = <0x1a04000 0x1000>;
1640
1641                         clocks = <&rpmcc RPM_QDSS_CLK>;
1642                         clock-names = "apb_pclk";
1643
1644                         in-ports {
1645                                 #address-cells = <1>;
1646                                 #size-cells = <0>;
1647
1648                                 /*
1649                                  * Not described input ports:
1650                                  * 2 - connected to STM component
1651                                  * 3 - not-connected
1652                                  * 6 - not-connected
1653                                  * 7 - not-connected
1654                                  */
1655                                 port@0 {
1656                                         reg = <0>;
1657                                         funnel_in0: endpoint {
1658                                                 remote-endpoint = <&etm0_out>;
1659                                         };
1660                                 };
1661                                 port@1 {
1662                                         reg = <1>;
1663                                         funnel_in1: endpoint {
1664                                                 remote-endpoint = <&etm1_out>;
1665                                         };
1666                                 };
1667                                 port@4 {
1668                                         reg = <4>;
1669                                         funnel_in4: endpoint {
1670                                                 remote-endpoint = <&etm2_out>;
1671                                         };
1672                                 };
1673                                 port@5 {
1674                                         reg = <5>;
1675                                         funnel_in5: endpoint {
1676                                                 remote-endpoint = <&etm3_out>;
1677                                         };
1678                                 };
1679                         };
1680
1681                         out-ports {
1682                                 port {
1683                                         funnel_out: endpoint {
1684                                                 remote-endpoint = <&replicator_in>;
1685                                         };
1686                                 };
1687                         };
1688                 };
1689
1690                 etm@1a1c000 {
1691                         compatible = "arm,coresight-etm3x", "arm,primecell";
1692                         reg = <0x1a1c000 0x1000>;
1693
1694                         clocks = <&rpmcc RPM_QDSS_CLK>;
1695                         clock-names = "apb_pclk";
1696
1697                         cpu = <&CPU0>;
1698
1699                         out-ports {
1700                                 port {
1701                                         etm0_out: endpoint {
1702                                                 remote-endpoint = <&funnel_in0>;
1703                                         };
1704                                 };
1705                         };
1706                 };
1707
1708                 etm@1a1d000 {
1709                         compatible = "arm,coresight-etm3x", "arm,primecell";
1710                         reg = <0x1a1d000 0x1000>;
1711
1712                         clocks = <&rpmcc RPM_QDSS_CLK>;
1713                         clock-names = "apb_pclk";
1714
1715                         cpu = <&CPU1>;
1716
1717                         out-ports {
1718                                 port {
1719                                         etm1_out: endpoint {
1720                                                 remote-endpoint = <&funnel_in1>;
1721                                         };
1722                                 };
1723                         };
1724                 };
1725
1726                 etm@1a1e000 {
1727                         compatible = "arm,coresight-etm3x", "arm,primecell";
1728                         reg = <0x1a1e000 0x1000>;
1729
1730                         clocks = <&rpmcc RPM_QDSS_CLK>;
1731                         clock-names = "apb_pclk";
1732
1733                         cpu = <&CPU2>;
1734
1735                         out-ports {
1736                                 port {
1737                                         etm2_out: endpoint {
1738                                                 remote-endpoint = <&funnel_in4>;
1739                                         };
1740                                 };
1741                         };
1742                 };
1743
1744                 etm@1a1f000 {
1745                         compatible = "arm,coresight-etm3x", "arm,primecell";
1746                         reg = <0x1a1f000 0x1000>;
1747
1748                         clocks = <&rpmcc RPM_QDSS_CLK>;
1749                         clock-names = "apb_pclk";
1750
1751                         cpu = <&CPU3>;
1752
1753                         out-ports {
1754                                 port {
1755                                         etm3_out: endpoint {
1756                                                 remote-endpoint = <&funnel_in5>;
1757                                         };
1758                                 };
1759                         };
1760                 };
1761         };
1762 };
1763 #include "qcom-apq8064-pins.dtsi"