1 // SPDX-License-Identifier: GPL-2.0-only
2 // Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
6 #include <dt-bindings/gpio/gpio.h>
7 #include "orion5x-mv88f5182.dtsi"
10 model = "Marvell Reference Design 88F5182 NAS";
11 compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
14 device_type = "memory";
15 reg = <0x00000000 0x4000000>; /* 64 MB */
19 bootargs = "console=ttyS0,115200n8 earlyprintk";
24 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
25 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
26 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
27 <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
31 compatible = "gpio-leds";
32 pinctrl-0 = <&pmx_debug_led>;
33 pinctrl-names = "default";
36 label = "rd88f5182:cpu";
37 linux,default-trigger = "heartbeat";
38 gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
47 devbus,bus-width = <8>;
48 devbus,turn-off-ps = <90000>;
49 devbus,badr-skew-ps = <0>;
50 devbus,acc-first-ps = <186000>;
51 devbus,acc-next-ps = <186000>;
53 /* Write parameters */
54 devbus,wr-high-ps = <90000>;
55 devbus,wr-low-ps = <90000>;
56 devbus,ale-wr-ps = <90000>;
59 compatible = "cfi-flash";
69 devbus,bus-width = <8>;
70 devbus,turn-off-ps = <90000>;
71 devbus,badr-skew-ps = <0>;
72 devbus,acc-first-ps = <186000>;
73 devbus,acc-next-ps = <186000>;
75 /* Write parameters */
76 devbus,wr-high-ps = <90000>;
77 devbus,wr-low-ps = <90000>;
78 devbus,ale-wr-ps = <90000>;
81 compatible = "cfi-flash";
99 phy-handle = <ðphy>;
105 clock-frequency = <100000>;
106 #address-cells = <1>;
109 pinctrl-0 = <&pmx_rtc>;
110 pinctrl-names = "default";
111 compatible = "dallas,ds1338";
119 ethphy: ethernet-phy {
125 pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
127 pinctrl-names = "default";
130 * MPP[20] PCI Clock to MV88F5182
131 * MPP[21] PCI Clock to mini PCI CON11
132 * MPP[22] USB 0 over current indication
133 * MPP[23] USB 1 over current indication
134 * MPP[24] USB 1 over current enable
135 * MPP[25] USB 0 over current enable
138 pmx_debug_led: pmx-debug_led {
139 marvell,pins = "mpp0";
140 marvell,function = "gpio";
143 pmx_reset_switch: pmx-reset-switch {
144 marvell,pins = "mpp1";
145 marvell,function = "gpio";
149 marvell,pins = "mpp3";
150 marvell,function = "gpio";
153 pmx_misc_gpios: pmx-misc-gpios {
154 marvell,pins = "mpp4", "mpp5";
155 marvell,function = "gpio";
158 pmx_pci_gpios: pmx-pci-gpios {
159 marvell,pins = "mpp6", "mpp7";
160 marvell,function = "gpio";
165 pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
166 pinctrl-names = "default";