2 * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include <dt-bindings/input/input.h>
11 #include "omap5-board-common.dtsi"
15 compatible = "isee,omap5-igep0050", "ti,omap5";
18 device_type = "memory";
19 reg = <0x0 0x80000000 0 0x7f000000>; /* 2032 MB */
23 compatible = "gpio-keys";
24 pinctrl-0 = <&power_button_pin>;
25 pinctrl-names = "default";
28 label = "Power Button";
29 linux,code = <KEY_POWER>;
30 gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
35 compatible = "gpio-leds";
37 label = "board:green:usr0";
38 gpios = <&tca6416 1 0>;
39 default-state = "off";
42 label = "board:red:usr1";
43 gpios = <&tca6416 2 0>;
44 default-state = "off";
47 label = "board:blue:usr1";
48 gpios = <&tca6416 3 0>;
49 default-state = "off";
55 vdda-supply = <&ldo7_reg>;
59 pinctrl-names = "default";
60 pinctrl-0 = <&i2c4_pins>;
63 compatible = "ti,tca6416";
70 /* LDO4 is VPP1 - ball AD9 */
72 regulator-min-microvolt = <2000000>;
73 regulator-max-microvolt = <2000000>;
77 * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33,
78 * VDDA_HDMI - ball AN25
82 regulator-min-microvolt = <1800000>;
83 regulator-max-microvolt = <1800000>;
87 i2c4_pins: pinmux_i2c4_pins {
88 pinctrl-single,pins = <
89 OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* i2c4_scl */
90 OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0) /* i2c4_sda */
94 power_button_pin: pinctrl_power_button_pin {
95 pinctrl-single,pins = <
96 OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6) /* gpio4_118 */
102 gpios = <&tca6416 11 0>, /* TCA6416 P01, CT_CP_HDP */
103 <&tca6416 12 0>, /* TCA6416 P00, LS_OE*/
104 <&gpio7 1 0>, /* 193, HPD */
105 <&gpio7 2 0>, /* 194, SCL */
106 <&gpio7 3 0>; /* 195, SDA */
110 ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio line 144 */
114 pinctrl-single,pins = <
115 OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_144 */
116 OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */