2 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "omap443x.dtsi"
11 #include "elpida_ecb240abacn.dtsi"
14 model = "TI OMAP4 SDP board";
15 compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
18 device_type = "memory";
19 reg = <0x80000000 0x40000000>; /* 1 GB */
28 vdd_eth: fixedregulator-vdd-eth {
29 compatible = "regulator-fixed";
30 regulator-name = "VDD_ETH";
31 regulator-min-microvolt = <3300000>;
32 regulator-max-microvolt = <3300000>;
33 gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
36 startup-delay-us = <25000>;
39 vbat: fixedregulator-vbat {
40 compatible = "regulator-fixed";
41 regulator-name = "VBAT";
42 regulator-min-microvolt = <3750000>;
43 regulator-max-microvolt = <3750000>;
48 compatible = "gpio-leds";
50 label = "omap4:green:debug0";
51 gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
55 label = "omap4:green:debug1";
56 gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
60 label = "omap4:green:debug2";
61 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
65 label = "omap4:green:debug3";
66 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
70 label = "omap4:green:debug4";
71 gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
75 label = "omap4:blue:user";
76 gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
80 label = "omap4:red:user";
81 gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
85 label = "omap4:green:user";
86 gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
91 compatible = "pwm-leds";
93 label = "omap4::keypad";
94 pwms = <&twl_pwm 0 7812500>;
95 max-brightness = <127>;
99 label = "omap4:green:chrg";
100 pwms = <&twl_pwmled 0 7812500>;
101 max-brightness = <255>;
106 compatible = "pwm-backlight";
107 pwms = <&twl_pwm 1 7812500>;
108 brightness-levels = <
113 default-brightness-level = <13>;
117 compatible = "ti,abe-twl6040";
118 ti,model = "SDP4430";
120 ti,jack-detection = <1>;
121 ti,mclk-freq = <38400000>;
126 ti,twl6040 = <&twl6040>;
130 "Headset Stereophone", "HSOL",
131 "Headset Stereophone", "HSOR",
132 "Earphone Spk", "EP",
137 "Vibrator", "VIBRAL",
138 "Vibrator", "VIBRAR",
139 "HSMIC", "Headset Mic",
140 "Headset Mic", "Headset Mic Bias",
141 "MAINMIC", "Main Handset Mic",
142 "Main Handset Mic", "Main Mic Bias",
143 "SUBMIC", "Sub Handset Mic",
144 "Sub Handset Mic", "Main Mic Bias",
147 "DMic", "Digital Mic",
148 "Digital Mic", "Digital Mic1 Bias";
151 /* regulator for wl12xx on sdio5 */
152 wl12xx_vmmc: wl12xx_vmmc {
153 pinctrl-names = "default";
154 pinctrl-0 = <&wl12xx_gpio>;
155 compatible = "regulator-fixed";
156 regulator-name = "vwl1271";
157 regulator-min-microvolt = <1800000>;
158 regulator-max-microvolt = <1800000>;
159 gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
160 startup-delay-us = <70000>;
164 tpd12s015: encoder@0 {
165 compatible = "ti,tpd12s015";
167 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
168 <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
169 <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
172 #address-cells = <1>;
178 tpd12s015_in: endpoint@0 {
179 remote-endpoint = <&hdmi_out>;
186 tpd12s015_out: endpoint@0 {
187 remote-endpoint = <&hdmi_connector_in>;
194 compatible = "hdmi-connector";
200 hdmi_connector_in: endpoint {
201 remote-endpoint = <&tpd12s015_out>;
208 pinctrl-names = "default";
214 uart2_pins: pinmux_uart2_pins {
215 pinctrl-single,pins = <
216 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
217 0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
218 0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
219 0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
223 uart3_pins: pinmux_uart3_pins {
224 pinctrl-single,pins = <
225 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
226 0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
227 0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
228 0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
232 uart4_pins: pinmux_uart4_pins {
233 pinctrl-single,pins = <
234 0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
235 0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
239 twl6040_pins: pinmux_twl6040_pins {
240 pinctrl-single,pins = <
241 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
242 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
246 mcpdm_pins: pinmux_mcpdm_pins {
247 pinctrl-single,pins = <
248 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
249 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
250 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
251 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
252 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
256 dmic_pins: pinmux_dmic_pins {
257 pinctrl-single,pins = <
258 0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
259 0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
260 0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
261 0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
265 mcbsp1_pins: pinmux_mcbsp1_pins {
266 pinctrl-single,pins = <
267 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
268 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
269 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
270 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
274 mcbsp2_pins: pinmux_mcbsp2_pins {
275 pinctrl-single,pins = <
276 0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
277 0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
278 0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
279 0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
283 mcspi1_pins: pinmux_mcspi1_pins {
284 pinctrl-single,pins = <
285 0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
286 0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
287 0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
288 0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
292 dss_hdmi_pins: pinmux_dss_hdmi_pins {
293 pinctrl-single,pins = <
294 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
295 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
296 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
300 tpd12s015_pins: pinmux_tpd12s015_pins {
301 pinctrl-single,pins = <
302 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
303 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
304 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
308 i2c1_pins: pinmux_i2c1_pins {
309 pinctrl-single,pins = <
310 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
311 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
315 i2c2_pins: pinmux_i2c2_pins {
316 pinctrl-single,pins = <
317 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
318 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
322 i2c3_pins: pinmux_i2c3_pins {
323 pinctrl-single,pins = <
324 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
325 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
329 i2c4_pins: pinmux_i2c4_pins {
330 pinctrl-single,pins = <
331 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
332 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
336 /* wl12xx GPIO output for WLAN_EN */
337 wl12xx_gpio: pinmux_wl12xx_gpio {
338 pinctrl-single,pins = <
339 0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
343 /* wl12xx GPIO inputs and SDIO pins */
344 wl12xx_pins: pinmux_wl12xx_pins {
345 pinctrl-single,pins = <
346 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
347 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
348 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
349 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
350 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
351 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
352 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
358 pinctrl-names = "default";
359 pinctrl-0 = <&i2c1_pins>;
361 clock-frequency = <400000>;
365 /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
366 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
370 compatible = "ti,twl6040";
373 pinctrl-names = "default";
374 pinctrl-0 = <&twl6040_pins>;
376 /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
377 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
378 ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
380 vio-supply = <&v1v8>;
381 v2v1-supply = <&v2v1>;
384 /* regulators for vibra motor */
385 vddvibl-supply = <&vbat>;
386 vddvibr-supply = <&vbat>;
389 /* Vibra driver, motor resistance parameters */
390 ti,vibldrv-res = <8>;
391 ti,vibrdrv-res = <3>;
392 ti,viblmotor-res = <10>;
393 ti,vibrmotor-res = <10>;
398 #include "twl6030.dtsi"
399 #include "twl6030_omap4.dtsi"
402 pinctrl-names = "default";
403 pinctrl-0 = <&i2c2_pins>;
405 clock-frequency = <400000>;
409 pinctrl-names = "default";
410 pinctrl-0 = <&i2c3_pins>;
412 clock-frequency = <400000>;
416 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
419 compatible = "ti,tmp105";
424 * Ambient Light Sensor
425 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
428 compatible = "rohm,bh1780";
434 pinctrl-names = "default";
435 pinctrl-0 = <&i2c4_pins>;
437 clock-frequency = <400000>;
440 * 3-Axis Digital Compass
441 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
444 compatible = "honeywell,hmc5843";
450 pinctrl-names = "default";
451 pinctrl-0 = <&mcspi1_pins>;
454 compatible = "ks8851";
455 spi-max-frequency = <24000000>;
457 interrupt-parent = <&gpio2>;
458 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
459 vdd-supply = <&vdd_eth>;
464 vmmc-supply = <&vmmc>;
469 vmmc-supply = <&vaux1>;
483 pinctrl-names = "default";
484 pinctrl-0 = <&wl12xx_pins>;
485 vmmc-supply = <&wl12xx_vmmc>;
490 #address-cells = <1>;
493 compatible = "ti,wl1281";
495 interrupt-parent = <&gpio1>;
496 interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
497 ref-clock-frequency = <26000000>;
498 tcxo-clock-frequency = <26000000>;
504 device-handle = <&elpida_ECB240ABACN>;
509 device-handle = <&elpida_ECB240ABACN>;
513 keypad,num-rows = <8>;
514 keypad,num-columns = <8>;
515 linux,keymap = <0x00000012 /* KEY_E */
516 0x00010013 /* KEY_R */
517 0x00020014 /* KEY_T */
518 0x00030066 /* KEY_HOME */
519 0x0004003f /* KEY_F5 */
520 0x000500f0 /* KEY_UNKNOWN */
521 0x00060017 /* KEY_I */
522 0x0007002a /* KEY_LEFTSHIFT */
523 0x01000020 /* KEY_D*/
524 0x01010021 /* KEY_F */
525 0x01020022 /* KEY_G */
526 0x010300e7 /* KEY_SEND */
527 0x01040040 /* KEY_F6 */
528 0x010500f0 /* KEY_UNKNOWN */
529 0x01060025 /* KEY_K */
530 0x0107001c /* KEY_ENTER */
531 0x0200002d /* KEY_X */
532 0x0201002e /* KEY_C */
533 0x0202002f /* KEY_V */
534 0x0203006b /* KEY_END */
535 0x02040041 /* KEY_F7 */
536 0x020500f0 /* KEY_UNKNOWN */
537 0x02060034 /* KEY_DOT */
538 0x0207003a /* KEY_CAPSLOCK */
539 0x0300002c /* KEY_Z */
540 0x0301004e /* KEY_KPLUS */
541 0x03020030 /* KEY_B */
542 0x0303003b /* KEY_F1 */
543 0x03040042 /* KEY_F8 */
544 0x030500f0 /* KEY_UNKNOWN */
545 0x03060018 /* KEY_O */
546 0x03070039 /* KEY_SPACE */
547 0x04000011 /* KEY_W */
548 0x04010015 /* KEY_Y */
549 0x04020016 /* KEY_U */
550 0x0403003c /* KEY_F2 */
551 0x04040073 /* KEY_VOLUMEUP */
552 0x040500f0 /* KEY_UNKNOWN */
553 0x04060026 /* KEY_L */
554 0x04070069 /* KEY_LEFT */
555 0x0500001f /* KEY_S */
556 0x05010023 /* KEY_H */
557 0x05020024 /* KEY_J */
558 0x0503003d /* KEY_F3 */
559 0x05040043 /* KEY_F9 */
560 0x05050072 /* KEY_VOLUMEDOWN */
561 0x05060032 /* KEY_M */
562 0x0507006a /* KEY_RIGHT */
563 0x06000010 /* KEY_Q */
564 0x0601001e /* KEY_A */
565 0x06020031 /* KEY_N */
566 0x0603009e /* KEY_BACK */
567 0x0604000e /* KEY_BACKSPACE */
568 0x060500f0 /* KEY_UNKNOWN */
569 0x06060019 /* KEY_P */
570 0x06070067 /* KEY_UP */
571 0x07000094 /* KEY_PROG1 */
572 0x07010095 /* KEY_PROG2 */
573 0x070200ca /* KEY_PROG3 */
574 0x070300cb /* KEY_PROG4 */
575 0x0704003e /* KEY_F4 */
576 0x070500f0 /* KEY_UNKNOWN */
577 0x07060160 /* KEY_OK */
578 0x0707006c>; /* KEY_DOWN */
579 linux,input-no-autorepeat;
583 interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
584 &omap4_pmx_core OMAP4_UART2_RX>;
585 pinctrl-names = "default";
586 pinctrl-0 = <&uart2_pins>;
590 interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
591 &omap4_pmx_core OMAP4_UART3_RX>;
592 pinctrl-names = "default";
593 pinctrl-0 = <&uart3_pins>;
597 interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
598 &omap4_pmx_core OMAP4_UART4_RX>;
599 pinctrl-names = "default";
600 pinctrl-0 = <&uart4_pins>;
604 pinctrl-names = "default";
605 pinctrl-0 = <&mcbsp1_pins>;
610 pinctrl-names = "default";
611 pinctrl-0 = <&mcbsp2_pins>;
616 pinctrl-names = "default";
617 pinctrl-0 = <&dmic_pins>;
622 pinctrl-names = "default";
623 pinctrl-0 = <&mcpdm_pins>;
627 &twl_usb_comparator {
628 usb-supply = <&vusb>;
632 interface-type = <1>;
643 vdd-supply = <&vcxio>;
646 dsi1_out_ep: endpoint {
647 remote-endpoint = <&lcd0_in>;
648 lanes = <0 1 2 3 4 5>;
653 compatible = "tpo,taal", "panel-dsi-cm";
656 reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
660 remote-endpoint = <&dsi1_out_ep>;
668 vdd-supply = <&vcxio>;
671 dsi2_out_ep: endpoint {
672 remote-endpoint = <&lcd1_in>;
673 lanes = <0 1 2 3 4 5>;
678 compatible = "tpo,taal", "panel-dsi-cm";
681 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
685 remote-endpoint = <&dsi2_out_ep>;
693 vdda-supply = <&vdac>;
697 remote-endpoint = <&tpd12s015_in>;