2 * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
4 * Based on omap3-beagle-xm.dts
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
12 #include "omap36xx.dtsi"
15 model = "OMAP3 GTA04";
16 compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
25 device_type = "memory";
26 reg = <0x80000000 0x20000000>; /* 512 MB */
35 compatible = "gpio-keys";
40 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
46 compatible = "ti,omap-twl4030";
54 compatible = "simple-audio-card";
55 simple-audio-card,name = "GTA04 voice";
56 simple-audio-card,bitclock-master = <&telephony_link_master>;
57 simple-audio-card,frame-master = <&telephony_link_master>;
58 simple-audio-card,format = "i2s";
59 simple-audio-card,bitclock-inversion;
60 simple-audio-card,frame-inversion;
61 simple-audio-card,cpu {
62 sound-dai = <&mcbsp4>;
65 telephony_link_master: simple-audio-card,codec {
66 sound-dai = <>m601_codec>;
70 gtm601_codec: gsm_codec {
71 compatible = "option,gtm601";
72 #sound-dai-cells = <0>;
76 compatible = "spi-gpio";
77 #address-cells = <0x1>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&spi_gpio_pins>;
82 gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
83 gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
84 gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
85 cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
86 num-chipselects = <1>;
90 compatible = "toppoly,td028ttec1";
92 spi-max-frequency = <100000>;
99 remote-endpoint = <&dpi_out>;
106 compatible = "pwm-backlight";
107 pwms = <&pwm11 0 12000000 0>;
108 pwm-names = "backlight";
109 brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
110 default-brightness-level = <9>; /* => 90 */
111 pinctrl-names = "default";
112 pinctrl-0 = <&backlight_pins>;
116 compatible = "ti,omap-dmtimer-pwm";
117 ti,timers = <&timer11>;
121 hsusb2_phy: hsusb2_phy {
122 compatible = "usb-nop-xceiv";
123 reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
127 compatible = "composite-video-connector";
131 tv_connector_in: endpoint {
132 remote-endpoint = <&opa_out>;
138 compatible = "ti,opa362";
139 enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */
142 #address-cells = <1>;
148 remote-endpoint = <&venc_out>;
155 remote-endpoint = <&tv_connector_in>;
161 wifi_pwrseq: wifi_pwrseq {
162 compatible = "mmc-pwrseq-simple";
163 reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */
168 pinctrl-names = "default";
173 hsusb2_pins: pinmux_hsusb2_pins {
174 pinctrl-single,pins = <
175 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
176 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
177 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
178 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
179 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
180 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
184 uart1_pins: pinmux_uart1_pins {
185 pinctrl-single,pins = <
186 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
187 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
191 uart2_pins: pinmux_uart2_pins {
192 pinctrl-single,pins = <
193 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
194 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
198 uart3_pins: pinmux_uart3_pins {
199 pinctrl-single,pins = <
200 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
201 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
205 mmc1_pins: pinmux_mmc1_pins {
206 pinctrl-single,pins = <
207 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
208 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
209 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
210 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
211 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
212 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
216 backlight_pins: backlight_pins_pimnux {
217 pinctrl-single,pins = <
218 OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */
222 dss_dpi_pins: pinmux_dss_dpi_pins {
223 pinctrl-single,pins = <
224 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
225 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
226 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
227 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
228 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
229 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
230 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
231 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
232 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
233 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
234 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
235 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
236 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
237 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
238 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
239 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
240 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
241 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
242 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
243 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
244 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
245 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
246 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
247 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
248 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
249 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
250 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
251 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
256 pinctrl-single,pins = <
257 OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
261 bma180_pins: pinmux_bma180_pins {
262 pinctrl-single,pins = <
263 OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
267 itg3200_pins: pinmux_itg3200_pins {
268 pinctrl-single,pins = <
269 OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
273 hmc5843_pins: pinmux_hmc5843_pins {
274 pinctrl-single,pins = <
275 OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
279 penirq_pins: pinmux_penirq_pins {
280 pinctrl-single,pins = <
281 /* here we could enable to wakeup the cpu from suspend by a pen touch */
282 OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
288 pinctrl-names = "default";
293 hsusb2_2_pins: pinmux_hsusb2_2_pins {
294 pinctrl-single,pins = <
295 OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
296 OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
297 OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
298 OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
299 OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
300 OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
304 spi_gpio_pins: spi_gpio_pinmux {
305 pinctrl-single,pins = <
306 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
307 OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
308 OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
309 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
315 clock-frequency = <2600000>;
319 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
320 interrupt-parent = <&intc>;
323 compatible = "ti,twl4030-audio";
324 ti,enable-vibra = <1>;
326 ti,ramp_delay_value = <3>;
331 compatible = "ti,twl4030-power";
337 #include "twl4030.dtsi"
338 #include "twl4030_omap3.dtsi"
341 clock-frequency = <400000>;
343 /* pressure sensor */
345 compatible = "bosch,bmp085";
347 interrupt-parent = <&gpio4>;
348 interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
353 compatible = "bosch,bma180";
355 pinctrl-names = "default";
356 pinctrl-0 = <&bma180_pins>;
357 interrupt-parent = <&gpio4>;
358 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
363 compatible = "invensense,itg3200";
365 pinctrl-names = "default";
366 pinctrl-0 = <&itg3200_pins>;
367 interrupt-parent = <&gpio2>;
368 interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
372 tca6507: tca6507@45 {
373 compatible = "ti,tca6507";
374 #address-cells = <1>;
381 gta04_led0: red_aux@0 {
382 label = "gta04:red:aux";
386 gta04_led1: green_aux@1 {
387 label = "gta04:green:aux";
391 gta04_led3: red_power@3 {
392 label = "gta04:red:power";
394 linux,default-trigger = "default-on";
397 gta04_led4: green_power@4 {
398 label = "gta04:green:power";
402 wifi_reset: wifi_reset@6 {
408 /* compass aka magnetometer */
410 compatible = "honeywell,hmc5883l";
412 pinctrl-names = "default";
413 pinctrl-0 = <&hmc5843_pins>;
414 interrupt-parent = <&gpio4>;
415 interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* gpio112 */
420 compatible = "ti,tsc2007";
422 pinctrl-names = "default";
423 pinctrl-0 = <&penirq_pins>;
424 interrupt-parent = <&gpio6>;
425 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
426 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */
427 ti,x-plate-ohms = <600>;
428 touchscreen-size-x = <480>;
429 touchscreen-size-y = <640>;
430 touchscreen-max-pressure = <1000>;
431 touchscreen-fuzz-x = <3>;
432 touchscreen-fuzz-y = <8>;
433 touchscreen-fuzz-pressure = <10>;
434 touchscreen-inverted-y;
439 compatible = "atmel,24c64";
445 clock-frequency = <100000>;
449 interface-type = <0>;
450 usb-phy = <&usb2_phy>;
452 phy-names = "usb2-phy";
458 port2-mode = "ehci-phy";
462 phys = <0 &hsusb2_phy>;
466 pinctrl-names = "default";
467 pinctrl-0 = <&mmc1_pins>;
468 vmmc-supply = <&vmmc1>;
474 vmmc-supply = <&vaux4>;
478 mmc-pwrseq = <&wifi_pwrseq>;
490 pinctrl-names = "default";
491 pinctrl-0 = <&uart1_pins>;
495 pinctrl-names = "default";
496 pinctrl-0 = <&uart2_pins>;
500 pinctrl-names = "default";
501 pinctrl-0 = <&uart3_pins>;
505 ti,bb-uvolt = <3200000>;
511 regulator-min-microvolt = <2500000>;
512 regulator-max-microvolt = <3000000>;
517 regulator-min-microvolt = <2800000>;
518 regulator-max-microvolt = <2800000>;
524 regulator-min-microvolt = <2500000>;
525 regulator-max-microvolt = <2500000>;
530 regulator-min-microvolt = <2800000>;
531 regulator-max-microvolt = <3150000>;
536 regulator-min-microvolt = <2800000>;
537 regulator-max-microvolt = <3150000>;
540 /* Needed to power the DPI pins */
547 pinctrl-names = "default";
548 pinctrl-0 = < &dss_dpi_pins >;
551 vdds_dsi-supply = <&vpll2>;
555 remote-endpoint = <&lcd_in>;
564 vdda-supply = <&vdac>;
566 #address-cells = <1>;
572 remote-endpoint = <&opa_in>;
580 ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
583 compatible = "ti,omap2-nand";
584 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
585 interrupt-parent = <&gpmc>;
586 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
587 <1 IRQ_TYPE_NONE>; /* termcount */
588 nand-bus-width = <16>;
589 ti,nand-ecc-opt = "bch8";
591 gpmc,sync-clk-ps = <0>;
593 gpmc,cs-rd-off-ns = <44>;
594 gpmc,cs-wr-off-ns = <44>;
595 gpmc,adv-on-ns = <6>;
596 gpmc,adv-rd-off-ns = <34>;
597 gpmc,adv-wr-off-ns = <44>;
598 gpmc,we-off-ns = <40>;
599 gpmc,oe-off-ns = <54>;
600 gpmc,access-ns = <64>;
601 gpmc,rd-cycle-ns = <82>;
602 gpmc,wr-cycle-ns = <82>;
603 gpmc,wr-access-ns = <40>;
604 gpmc,wr-data-mux-bus-ns = <0>;
605 gpmc,device-width = <2>;
607 #address-cells = <1>;
617 reg = <0x80000 0x1c0000>;
620 bootloaders_env@240000 {
621 label = "U-Boot Env";
622 reg = <0x240000 0x40000>;
627 reg = <0x280000 0x600000>;
631 label = "File System";
632 reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */
642 pinctrl-names = "default";
643 pinctrl-0 = <&hdq_pins>;