arch/arm/boot/dts/nspire.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *  linux/arch/arm/boot/nspire.dtsi
   4  *
   5  *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
   6  */
   7
   8 / {
   9         #address-cells = <1>;
  10         #size-cells = <1>;
  11         interrupt-parent = <&intc>;
  12
  13         cpus {
  14                 cpu@0 {
  15                         compatible = "arm,arm926ej-s";
  16                 };
  17         };
  18
  19         bootrom: bootrom@0 {
  20                 reg = <0x00000000 0x80000>;
  21         };
  22
  23         sram: sram@a4000000 {
  24                 device = "memory";
  25                 reg = <0xa4000000 0x20000>;
  26         };
  27
  28         timer_clk: timer_clk {
  29                 #clock-cells = <0>;
  30                 compatible = "fixed-clock";
  31                 clock-frequency = <32768>;
  32         };
  33
  34         base_clk: base_clk {
  35                 #clock-cells = <0>;
  36                 reg = <0x900b0024 0x4>;
  37         };
  38
  39         ahb_clk: ahb_clk {
  40                 #clock-cells = <0>;
  41                 reg = <0x900b0024 0x4>;
  42                 clocks = <&base_clk>;
  43         };
  44
  45         apb_pclk: apb_pclk {
  46                 #clock-cells = <0>;
  47                 compatible = "fixed-factor-clock";
  48                 clock-div = <2>;
  49                 clock-mult = <1>;
  50                 clocks = <&ahb_clk>;
  51         };
  52
  53         usb_phy: usb_phy {
  54                 compatible = "usb-nop-xceiv";
  55                 #phy-cells = <0>;
  56         };
  57
  58         vbus_reg: vbus_reg {
  59                 compatible = "regulator-fixed";
  60
  61                 regulator-name = "USB VBUS output";
  62                 regulator-type = "voltage";
  63
  64                 regulator-min-microvolt = <5000000>;
  65                 regulator-max-microvolt = <5000000>;
  66         };
  67
  68         ahb {
  69                 compatible = "simple-bus";
  70                 #address-cells = <1>;
  71                 #size-cells = <1>;
  72                 ranges;
  73
  74                 spi: spi@a9000000 {
  75                         reg = <0xa9000000 0x1000>;
  76                 };
  77
  78                 usb0: usb@b0000000 {
  79                         compatible = "lsi,zevio-usb";
  80                         reg = <0xb0000000 0x1000>;
  81                         interrupts = <8>;
  82
  83                         usb-phy = <&usb_phy>;
  84                         vbus-supply = <&vbus_reg>;
  85                 };
  86
  87                 usb1: usb@b4000000 {
  88                         reg = <0xb4000000 0x1000>;
  89                         interrupts = <9>;
  90                         status = "disabled";
  91                 };
  92
  93                 lcd: lcd@c0000000 {
  94                         compatible = "arm,pl111", "arm,primecell";
  95                         reg = <0xc0000000 0x1000>;
  96                         interrupts = <21>;
  97
  98                         /*
  99                          * We assume the same clock is fed to APB and CLCDCLK.
 100                          * There is some code to scale the clock down by a factor
 101                          * 48 for the display so likely the frequency to the
 102                          * display is 1MHz and the CLCDCLK is 48 MHz.
 103                          */
 104                         clocks = <&apb_pclk>, <&apb_pclk>;
 105                         clock-names = "clcdclk", "apb_pclk";
 106                 };
 107
 108                 adc: adc@c4000000 {
 109                         reg = <0xc4000000 0x1000>;
 110                         interrupts = <11>;
 111                 };
 112
 113                 tdes: crypto@c8010000 {
 114                         reg = <0xc8010000 0x1000>;
 115                 };
 116
 117                 sha256: crypto@cc000000 {
 118                         reg = <0xcc000000 0x1000>;
 119                 };
 120
 121                 apb@90000000 {
 122                         compatible = "simple-bus";
 123                         #address-cells = <1>;
 124                         #size-cells = <1>;
 125                         clock-ranges;
 126                         ranges;
 127
 128                         gpio: gpio@90000000 {
 129                                 compatible = "lsi,zevio-gpio";
 130                                 reg = <0x90000000 0x1000>;
 131                                 interrupts = <7>;
 132                                 gpio-controller;
 133                                 #gpio-cells = <2>;
 134                         };
 135
 136                         fast_timer: timer@90010000 {
 137                                 reg = <0x90010000 0x1000>;
 138                                 interrupts = <17>;
 139                         };
 140
 141                         uart: serial@90020000 {
 142                                 reg = <0x90020000 0x1000>;
 143                                 interrupts = <1>;
 144                         };
 145
 146                         timer0: timer@900c0000 {
 147                                 reg = <0x900c0000 0x1000>;
 148                                 clocks = <&timer_clk>, <&timer_clk>,
 149                                          <&timer_clk>;
 150                                 clock-names = "timer0clk", "timer1clk",
 151                                               "apb_pclk";
 152                         };
 153
 154                         timer1: timer@900d0000 {
 155                                 reg = <0x900d0000 0x1000>;
 156                                 interrupts = <19>;
 157                                 clocks = <&timer_clk>, <&timer_clk>,
 158                                          <&timer_clk>;
 159                                 clock-names = "timer0clk", "timer1clk",
 160                                               "apb_pclk";
 161                         };
 162
 163                         watchdog: watchdog@90060000 {
 164                                 compatible = "arm,amba-primecell";
 165                                 reg = <0x90060000 0x1000>;
 166                                 interrupts = <3>;
 167                         };
 168
 169                         rtc: rtc@90090000 {
 170                                 reg = <0x90090000 0x1000>;
 171                                 interrupts = <4>;
 172                         };
 173
 174                         misc: misc@900a0000 {
 175                                 reg = <0x900a0000 0x1000>;
 176                         };
 177
 178                         pwr: pwr@900b0000 {
 179                                 reg = <0x900b0000 0x1000>;
 180                                 interrupts = <15>;
 181                         };
 182
 183                         keypad: input@900e0000 {
 184                                 compatible = "ti,nspire-keypad";
 185                                 reg = <0x900e0000 0x1000>;
 186                                 interrupts = <16>;
 187
 188                                 scan-interval = <1000>;
 189                                 row-delay = <200>;
 190
 191                                 clocks = <&apb_pclk>;
 192                         };
 193
 194                         contrast: contrast@900f0000 {
 195                                 reg = <0x900f0000 0x1000>;
 196                         };
 197
 198                         led: led@90110000 {
 199                                 reg = <0x90110000 0x1000>;
 200                         };
 201                 };
 202         };
 203 };