GNU Linux-libre 4.19.264-gnu1
[releases.git] / arch / arm / boot / dts / moxart-uc7112lx.dts
1 /* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
2  *
3  * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
4  *
5  * Licensed under GPLv2 or later.
6  */
7
8 /dts-v1/;
9 #include "moxart.dtsi"
10
11 / {
12         model = "MOXA UC-7112-LX";
13         compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
14
15         memory {
16                 device_type = "memory";
17                 reg = <0x0 0x2000000>;
18         };
19
20         clocks {
21                 ref12: ref12M {
22                         compatible = "fixed-clock";
23                         #clock-cells = <0>;
24                         clock-frequency = <12000000>;
25                 };
26         };
27
28         flash@80000000,0 {
29                 compatible = "numonyx,js28f128", "cfi-flash";
30                 reg = <0x80000000 0x1000000>;
31                 bank-width = <2>;
32                 #address-cells = <1>;
33                 #size-cells = <1>;
34                 partition@0 {
35                         label = "bootloader";
36                         reg = <0x0 0x40000>;
37                 };
38                 partition@40000 {
39                         label = "linux kernel";
40                         reg = <0x40000 0x1C0000>;
41                 };
42                 partition@200000 {
43                         label = "root filesystem";
44                         reg = <0x200000 0x800000>;
45                 };
46                 partition@a00000 {
47                         label = "user filesystem";
48                         reg = <0xa00000 0x600000>;
49                 };
50         };
51
52         leds {
53                 compatible = "gpio-leds";
54                 user-led {
55                         label = "ready-led";
56                         gpios = <&gpio 27 0x1>;
57                         default-state = "on";
58                         linux,default-trigger = "default-on";
59                 };
60         };
61
62         gpio_keys_polled {
63                 compatible = "gpio-keys-polled";
64                 #address-cells = <1>;
65                 #size-cells = <0>;
66                 poll-interval = <500>;
67                 button@25 {
68                         label = "GPIO Reset";
69                         linux,code = <116>;
70                         gpios = <&gpio 25 1>;
71                 };
72         };
73
74         chosen {
75                 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
76         };
77 };
78
79 &clk_pll {
80         clocks = <&ref12>;
81 };
82
83 &mmc {
84         status = "okay";
85 };
86
87 &mdio0 {
88         status = "okay";
89
90         ethphy0: ethernet-phy@1 {
91                 device_type = "ethernet-phy";
92                 compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
93                 reg = <1>;
94         };
95 };
96
97 &mdio1 {
98         status = "okay";
99
100         ethphy1: ethernet-phy@1 {
101                 device_type = "ethernet-phy";
102                 compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
103                 reg = <1>;
104         };
105 };
106
107 &mac0 {
108         status = "okay";
109 };
110
111 &mac1 {
112         status = "okay";
113 };
114
115 &uart0 {
116         status = "okay";
117 };