arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi

   1 /*
   2  * Common CPCAP configuration used on Motorola phones
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 &mcspi1 {
  10         cpcap: pmic@0 {
  11                 compatible = "motorola,cpcap", "st,6556002";
  12                 reg = <0>;      /* cs0 */
  13                 interrupt-parent = <&gpio1>;
  14                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
  15                 interrupt-controller;
  16                 #interrupt-cells = <2>;
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 spi-max-frequency = <9600000>;
  20                 spi-cs-high;
  21                 spi-cpol;
  22                 spi-cpha;
  23
  24                 cpcap_adc: adc {
  25                         compatible = "motorola,mapphone-cpcap-adc";
  26                         interrupts-extended = <&cpcap 8 0>;
  27                         interrupt-names = "adcdone";
  28                         #io-channel-cells = <1>;
  29                 };
  30
  31                 cpcap_battery: battery {
  32                         compatible = "motorola,cpcap-battery";
  33                         interrupts-extended = <
  34                                 &cpcap 6 0 &cpcap 5 0 &cpcap 3 0
  35                                 &cpcap 20 0 &cpcap 54 0
  36                         >;
  37                         interrupt-names =
  38                                 "eol", "lowbph", "lowbpl",
  39                                 "chrgcurr1", "battdetb";
  40                         io-channels = <&cpcap_adc 0 &cpcap_adc 1
  41                                        &cpcap_adc 5 &cpcap_adc 6>;
  42                         io-channel-names = "battdetb", "battp",
  43                                            "chg_isense", "batti";
  44                         power-supplies = <&cpcap_charger>;
  45                 };
  46
  47                 cpcap_charger: charger {
  48                         compatible = "motorola,mapphone-cpcap-charger";
  49                         interrupts-extended = <
  50                                 &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
  51                                 &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
  52                         >;
  53                         interrupt-names =
  54                                 "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
  55                                 "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
  56                         mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
  57                                       &gpio3 23 GPIO_ACTIVE_LOW>;
  58                         io-channels = <&cpcap_adc 0 &cpcap_adc 1
  59                                        &cpcap_adc 2 &cpcap_adc 5
  60                                        &cpcap_adc 6>;
  61                         io-channel-names = "battdetb", "battp",
  62                                            "vbus", "chg_isense",
  63                                            "batti";
  64                 };
  65
  66                 cpcap_regulator: regulator {
  67                         compatible = "motorola,mapphone-cpcap-regulator";
  68
  69                         cpcap_regulators: regulators {
  70                         };
  71                 };
  72
  73                 cpcap_audio: audio-codec {
  74                         #sound-dai-cells = <1>;
  75
  76                         port@0 {
  77                                 cpcap_audio_codec0: endpoint {
  78                                 };
  79                         };
  80                         port@1 {
  81                                 cpcap_audio_codec1: endpoint {
  82                                 };
  83                         };
  84                 };
  85
  86                 cpcap_rtc: rtc {
  87                         compatible = "motorola,cpcap-rtc";
  88
  89                         interrupt-parent = <&cpcap>;
  90                         interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
  91                 };
  92
  93                 power_button: button {
  94                         compatible = "motorola,cpcap-pwrbutton";
  95
  96                         interrupts = <23 IRQ_TYPE_NONE>;
  97                 };
  98
  99                 cpcap_usb2_phy: phy {
 100                         compatible = "motorola,mapphone-cpcap-usb-phy";
 101                         pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
 102                         pinctrl-1 = <&usb_ulpi_pins>;
 103                         pinctrl-2 = <&usb_utmi_pins>;
 104                         pinctrl-3 = <&uart3_pins>;
 105                         pinctrl-names = "default", "ulpi", "utmi", "uart";
 106                         #phy-cells = <0>;
 107                         interrupts-extended = <
 108                                 &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
 109                                 &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
 110                                 &cpcap 48 0
 111                         >;
 112                         interrupt-names =
 113                                 "id_ground", "id_float", "se0conn", "vbusvld",
 114                                 "sessvld", "sessend", "se1", "dm", "dp";
 115                         mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
 116                                       &gpio1 0 GPIO_ACTIVE_HIGH>;
 117                         io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
 118                         io-channel-names = "vbus", "id";
 119                         vusb-supply = <&vusb>;
 120                 };
 121
 122                 led_red: led-red {
 123                         compatible = "motorola,cpcap-led-red";
 124                         vdd-supply = <&sw5>;
 125                         label = "status-led:red";
 126                 };
 127
 128                 led_green: led-green {
 129                         compatible = "motorola,cpcap-led-green";
 130                         vdd-supply = <&sw5>;
 131                         label = "status-led:green";
 132                 };
 133
 134                 led_blue: led-blue {
 135                         compatible = "motorola,cpcap-led-blue";
 136                         vdd-supply = <&sw5>;
 137                         label = "status-led:blue";
 138                 };
 139
 140                 led_adl: led-adl {
 141                         compatible = "motorola,cpcap-led-adl";
 142                         vdd-supply = <&sw5>;
 143                         label = "button-backlight";
 144                 };
 145
 146                 led_cp: led-cp {
 147                         compatible = "motorola,cpcap-led-cp";
 148                         vdd-supply = <&sw5>;
 149                         label = "shift-key-light";
 150                 };
 151         };
 152 };
 153
 154 &cpcap_regulators {
 155         sw5: SW5 {
 156                 regulator-min-microvolt = <5050000>;
 157                 regulator-max-microvolt = <5050000>;
 158                 regulator-enable-ramp-delay = <50000>;
 159                 regulator-boot-on;
 160         };
 161
 162         vcam: VCAM {
 163                 regulator-min-microvolt = <2900000>;
 164                 regulator-max-microvolt = <2900000>;
 165                 regulator-enable-ramp-delay = <1000>;
 166         };
 167
 168         /* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */
 169         vcsi: VCSI {
 170                 regulator-min-microvolt = <1800000>;
 171                 regulator-max-microvolt = <1800000>;
 172                 regulator-enable-ramp-delay = <1000>;
 173                 regulator-always-on;
 174         };
 175
 176         vdac: VDAC {
 177                 regulator-min-microvolt = <1800000>;
 178                 regulator-max-microvolt = <1800000>;
 179                 regulator-enable-ramp-delay = <1000>;
 180         };
 181
 182         vdig: VDIG {
 183                 regulator-min-microvolt = <1875000>;
 184                 regulator-max-microvolt = <1875000>;
 185                 regulator-enable-ramp-delay = <1000>;
 186         };
 187
 188         vfuse: VFUSE {
 189                 regulator-min-microvolt = <1500000>;
 190                 regulator-max-microvolt = <3150000>;
 191                 regulator-enable-ramp-delay = <1000>;
 192         };
 193
 194         vhvio: VHVIO {
 195                 regulator-min-microvolt = <2775000>;
 196                 regulator-max-microvolt = <2775000>;
 197                 regulator-enable-ramp-delay = <1000>;
 198                 regulator-always-on;
 199         };
 200
 201         /* Used by eMMC at mmc2 */
 202         vsdio: VSDIO {
 203                 regulator-min-microvolt = <2900000>;
 204                 regulator-max-microvolt = <2900000>;
 205                 regulator-enable-ramp-delay = <1000>;
 206         };
 207
 208         vpll: VPLL {
 209                 regulator-min-microvolt = <1200000>;
 210                 regulator-max-microvolt = <1800000>;
 211                 regulator-enable-ramp-delay = <100>;
 212         };
 213
 214         vrf1: VRF1 {
 215                 regulator-min-microvolt = <2775000>;
 216                 regulator-max-microvolt = <2775000>;
 217                 regulator-enable-ramp-delay = <1000>;
 218         };
 219
 220         vrf2: VRF2 {
 221                 regulator-min-microvolt = <2775000>;
 222                 regulator-max-microvolt = <2775000>;
 223                 regulator-enable-ramp-delay = <1000>;
 224         };
 225
 226         vrfref: VRFREF {
 227                 regulator-min-microvolt = <2500000>;
 228                 regulator-max-microvolt = <2775000>;
 229                 regulator-enable-ramp-delay = <100>;
 230         };
 231
 232         vwlan1: VWLAN1 {
 233                 regulator-min-microvolt = <1800000>;
 234                 regulator-max-microvolt = <1900000>;
 235                 regulator-enable-ramp-delay = <1000>;
 236         };
 237
 238         /* Used by micro-SDIO at mmc1 */
 239         vwlan2: VWLAN2 {
 240                 regulator-min-microvolt = <3000000>;
 241                 regulator-max-microvolt = <3000000>;
 242                 regulator-enable-ramp-delay = <1000>;
 243         };
 244
 245         vsim: VSIM {
 246                 regulator-min-microvolt = <1800000>;
 247                 regulator-max-microvolt = <2900000>;
 248                 regulator-enable-ramp-delay = <1000>;
 249         };
 250
 251         vsimcard: VSIMCARD {
 252                 regulator-min-microvolt = <1800000>;
 253                 regulator-max-microvolt = <2900000>;
 254                 regulator-enable-ramp-delay = <1000>;
 255         };
 256
 257         vvib: VVIB {
 258                 regulator-min-microvolt = <1300000>;
 259                 regulator-max-microvolt = <3000000>;
 260                 regulator-enable-ramp-delay = <500>;
 261         };
 262
 263         vusb: VUSB {
 264                 regulator-min-microvolt = <3300000>;
 265                 regulator-max-microvolt = <3300000>;
 266                 regulator-enable-ramp-delay = <1000>;
 267         };
 268
 269         vaudio: VAUDIO {
 270                 regulator-min-microvolt = <2775000>;
 271                 regulator-max-microvolt = <2775000>;
 272                 regulator-enable-ramp-delay = <1000>;
 273                 regulator-initial-mode = <0x00>; /* NORMAL */
 274         };
 275 };